Fakro stairs: functional and technical features, varieties

Fakro attic stairs are of a folding type, provide an opportunity to safely and comfortably climb to the attic or attic. Compact folded attic stairs provide a block "stored in the ceiling", while significantly saving scarce space.

These designs are different:

• strength;
• functionality;
• ease of use;
• compactness;
• original design;
• simple installation.

Functional and technical features

Folding ladders usually consist of 3-4 sections. The wood components are made from pine. The Fakro ladder can be easily "hidden into the ceiling" in one step using a special rod.

If there is a counter insulation (along the contour of the hatch cover) and insulation inside it, heat loss is excluded. With the help of a special lock and a rod built into the hatch, the lid can be easily closed, which provides reliable protection against unintended entry into the attic.

The model list of Fakro attic stairs is presented on the market not only with wooden folding options, but also with metal folding and wooden stationary models.

The hatch is practically indistinguishable in the ceiling, however, it is easy to open it with a rod. The spring-loaded design allows the lid to open smoothly and gently.

For information! Corner hinges, complete with a special stencil, will allow you to easily adjust the ladder to size with your own hands.

Varieties of stairs

Folding stairs for attics are good because they absolutely do not take up valuable "squares" of space. When you want to go up to the attic, you just need to open the hatch and push the structure. If it is not needed, it can be easily and discreetly removed.

Wooden folding types of Fakro stairs

1. The Fakro wood staircase is composed of 3 or 4 sections. When assembled, it fully fits on the ceiling hatch cover.
2. Installation of the Fakro attic staircase does not require any special skills from you - as mentioned above, the kit includes corner hinges and a special stencil. It is very easy to adjust the height.
3. The roof hatch is insulated in all varieties, in addition, it has a sealed circuit around the perimeter and is equipped with a built-in lock.
4. Side elements and steps are connected with a "swallow tail", which will not allow the structure to loosen during prolonged and frequent use.
5. The steps are equipped with anti-slip recesses.
6. The material used in the manufacture is pine harvested in winter: in this case, the wood does not retain moisture in itself, therefore the material is especially strong and straightforward (it is not "conducted" during drying). In addition, the wood is impregnated with an antiseptic.

Wooden views

LWS Smart:

• made of pine;
• 3-4 sections;
• hatch lined with fiberboard ("wood-like");
• 36 mm thick;
• designed for room heights - 325, 305, 280 cm.

LTK Thermo:

• made of pine, 3 sections;
• powerful thermal insulation of the hatch (a distinctive feature, insulation is 2 times thicker, the entire hatch is 66 mm) - an ideal view for a house with a cold attic;
• equipped with a metal handrail on the right;
• calculation for a room with a height of 280 cm;
• insulation in the lid with a thickness of 6 cm.

Fakro LDK roof ladders:

• material - pine;
• purpose - small rooms with a lack of space, therefore the 2-section option;
• the upper section is fixed on the hatch motionlessly, the lower one is pulled out along the metal guides;
• the bottom section (its length) is determined by the customer;
• total height - three types: 335, 300 and 270 cm;
• cover - 36 mm thick, white.

LWK Comfort:

• intended for installation in the attic;
• production material: high quality pine;
• the complete set includes an insulated cover with a thickness of 3.6 cm, lined with white (light) fiberboard, which makes it invisible on the ceiling of light colors;
• the model is composed of 3-4 sections;
• height from 280 to 305 cm;
• opening dimensions 120-130 X 60-70 cm.

Metal attic folding ladders

LMS (LWM):

• 3-section;
• the manhole cover is white (light), insulated;
• withstands large (unlike wood products) loads - maximum 200 kg;
• the dimensions of the ceiling opening are 120 x 60-70 cm.

LSF (Flame Retardant):

• made of galvanized steel;
• "Scissor" design, therefore, additional space during installation is not required - the structure is simplified to slide out of the hatch;
• S-shaped "scissor" elements are handrails at the same time;
• the hatch is made of refractory material, it serves as a kind of barrier against the spread of fire during a fire;
• there is a sealing contour around the perimeter - when heated, it expands, filling the gaps and reducing the smoke tolerance;
• maximum permissible load - 250 kg;
• steps in length: 30, 32 and 40 cm;
• fire-resistant protection - up to 30 minutes;
• ceiling opening dimensions: 70-120 X 50-70 cm;
• calculation for the height of the premises: 300 cm (additional step LSS - not less than 320 cm).

LST:

• folding "scissor" ladder, where the side elements (S-shaped) serve simultaneously as handrails;
• does not require additional space when pulling out;
• the hatch is thermally insulated and sealed with a contour along the perimeter;
• the operating instructions allow a load of up to 200 kg;
• steps 38, 31 and 26 cm long;
• dimensions of the opening in the ceiling: 80-120 x 50-70 cm;
• designed for a room with a height of 270-290 cm (with the additional option of the LSS step - at least 310 cm).

MSU "Dachnitsa" - stationary staircase

This model is made of spruce and is intended for arranging a permanent exit to the attic or attic, or for descending into the basement. In comparison with ordinary stationary ladders, these models take up significantly less space - due to the greater inclination (angle of 55 degrees).

The attic staircase Fakro "Summer resident" is equipped with either one or two handrails, it is possible to independently adjust the height of the room, respectively.

Options:

• maximum permissible load 160 kg;
• steps 14 cm wide;
• the intervals between the steps are 25 cm;
• steps 62 cm long;
• steps by number 13;
• the ceiling hatch has dimensions of 145 x 70 cm;
• the maximum permissible height in the room is 290 cm.

Optional accessories

Opening guard LXB. It is recommended to fence the opening of the hatch for the safety of using the stairs. The LXB model is very effective for this.

This fence is made of pine, set it on the hatch box, attaching it with metal brackets.

The fence has the following parameters:

• height - 95 cm;
• width - 130 cm.

It is possible to make a structure smaller in width - upon additional agreement of the order.

The LXH handrails are designed to help you move up and down stairs. This accessory is made of metal, painted in red. Attaches to the hinges at the corners of the manhole cover.

Diy attic stairs - it's simple

In the video presented - in this article - you will find additional information on this topic.