Grades of liquid nails "moment of installation"

Stamps

Glue Moment "Liquid nails" is produced in 16 variations. Each has its own strength of adhesion, differs in composition and is intended for a specific material.

• Express MV 50. Universal assembly adhesive, does not contain solvents, used for joining wood, PVC, insulation boards. You can plant baguettes, door frames, decorative elements.

• “One for everything. Super strong. " Manufactured using Flexec technology. Plastic, mono-component, has a high gripping force, so heavy and large elements can be glued to them. They can work on any surface with any porosity, fill up cracks, and make sealing. Moisture accelerates the hardening of the joint, so it can be used in rooms with increased dampness. They can combine natural stone, concrete, brick. The product is not suitable for working with glass, copper, brass and PVC.

• “One for everything. Transparent". It has the advantages of the previous brand, helps to seal the seams in water, but not in conditions of constant immersion. Shelf life no more than 15 months.
• Glue Express Decor. White acrylic composition. Quickly bonds all materials, but maximum adhesion is achieved with hygroscopic surfaces. Suitable for fixing decor.
• "Moment Installation. Waterproof ". It belongs to the class D moisture-resistant agents. It is a universal composition with the MB-40 marking. They can firmly glue any materials.
• "Super Strong MVP 70. Transparent". Due to the gripping force of 70 kg / m. sq. quickly glues any materials. Usually wall panels and interior decoration elements are placed on it. There is also a white composition.
• "Super Strong Lux MV-100". It has the qualities of the previous brand, but its adhesion force is 100 kg / m. sq. To glue heavy elements to them, there is no need to use props or clamps.
• "Extra strong MR-55". Manufactured on the basis of rubber. They can glue heavy objects of any texture. After application, it forms a thin, dry to the touch film that protects the bonded surface from contamination. The strongest adhesion occurs at the first contact of the surfaces during the destruction of the protective shell, therefore it is not recommended to move the working elements after fastening.
• "Universal MR-40". Based on synthetic rubber. It is easy to wash off. Fiberboard, concrete, marble masonry, natural stone, polystyrene panels, glass and fiberglass can be glued. Reliable, quickly adheres. Can be stored at low temperatures down to -20 ° C.
• "Moment Installation for MP-35 panels". Polystyrene and foam panels can be glued. According to its characteristics, it is similar to the brand "Universal MP-40", the same strong, but can be easily washed off until it is completely cured.
• "Instant grip MP-90". Designed for fast bonding of non-absorbent materials. You can bond polystyrene, foam, brick, plywood and stone bases.
• "Transparent scrum MF-80". The basis is Flextec polymer. The adhesive is characterized by a fast grip and can be used as a sealant. Colorless, solvent free. Smooth, non-absorbent materials can be joined.
• “The Moment of Fix. Universal ”,“ Expert ”. Locks almost instantly, has a coupling force of 40 kg / m. sq. Used only for indoor work. The composition must be kept closed between uses so that a film does not form. You can mount ceiling tiles, floor moldings, wood, metal, rosettes, wall panels and fill small gaps up to 10 mm deep.
• "Moment Installation. Polymeric".Has an acrylic-water dispersed composition, has excellent adhesion properties. You can fill deep gaps, after drying it becomes colorless. Bonds paper, cardboard, foam, wood, expanded polystyrene surfaces, parquet mosaics and PVC. Release form - bottles.

Adhesives Moment Installation based on synthetic resins

These mixtures are produced by the company's factories located in the United States. Composition Extra strong MP-55 contains phenol and aliphatic hydrocarbons, therefore, be sure to observe safety precautions, since the composition is flammable and vapors are hazardous to health. It is suitable for fast and durable gluing of any materials and their combinations, however, due to the solvents contained in the composition, it is not used when working with expanded polystyrene.

Due to the above characteristics, the main area of ​​application of the glue is outdoor work. It is also used for the installation of cladding panels, tiles. The adhesive strength increases as the adhesive cures. Primary - 55 kg / m², final - 70 kg / m². Available in tubes of 423 g.

Extra strong MP-55

Principle of operation

To get started, you need to install the tube (the container in which the glue or sealant is located) into the gun body. To do this, push the lever and pull out the piston. Then, in the vacant space, insert the tube, and press the rod all the way in, while holding the rear lever with your finger. After that, cut off the tip at a 45 degree angle and start gluing.

The principle of the pistol is very simple. When the trigger (rear lever) is pulled, the stem moves and squeezes the adhesive out of the gun. Glue comes out of the tip of the device. After finishing work, close the tip with a cap and hide the device until next time.

Pictured is a gun for liquid nails

General terms of delivery and pickup:

- At the moment, pickup does not work!

- when paying on the spot, payment for products occurs before unloading the machine (deposit);

- in case of partial or complete refusal of high-quality and paid products at the time of delivery, the funds are returned to the buyer in proportion to the decrease in the cost of the order;

- when ordering goods by individual size or with cutting to individual size (linoleum, gypsum plasterboard, plywood, cable, rolled metal, etc.), 100% prepayment of the order is made, refusal from quality goods sold by the meter, as well as from goods manufactured by individual size is not possible;

- delivery is carried out daily from 9-00 to 18-00;

- the cost of delivery does not include unloading, lifting, as well as cutting and sawing of materials;

- unloading time is limited depending on the weight of the cargo;

- delivery is carried out to the place where the car can go without violating traffic rules and the risk of damage to the vehicle;

- self-pickup is carried out only after prior agreement with the manager of the online store;

- bulky material (insulation, barrels, etc.) is calculated based on the volume of the cargo;

- additional requirements for the car, for example, a low height for entering a parking lot or an open body for vertical unloading is paid additionally: + 25% to the cost of the standard tariff.

The cost of loading and unloading and lifting to the floor

Multichannel phone: +7 (495) 968-73-05

Delivery to regions of Russia:

- delivery to the regions of Russia is carried out by means of the transport company CDEK and PEK 2 times a week;

- the goods are shipped to the transport company only after 100% payment for the order;

- the services of the transport company are fully paid by the buyer upon receipt;

- delivery to TC SDEK and PEC 500 rubles.

- return of goods of proper quality through the shopping mall is carried out at the expense of the Buyer.

Opening hours:

Monday-Saturday: 8:00 am to 7:00 pm

Mode of application

The gluing instructions are useful for beginners in the installation business.

Using the composition, they are guided by the principle of surface cleanliness. The part and base are clean before and after work. In time intervals, cleaning is done necessarily, in different ways.

Preparation of the base

The following operations are carried out with the base:

• Cleaning. Depending on the surface, rags, brushes, wet wash, detergents are used.
• Drying. Relevant both when using water (detergents) for cleaning, and without. A dried base will provide good adhesion.
• Sanding. The roughness significantly increases the bonding strength. Therefore, if possible (when the base is wooden, made of a material of similar strength), an operation is performed with sandpaper, after which the base is rough.

When the surface is ready, an adhesive mass is applied. An equal amount is applied in strips from a tube or dispensing syringe along the edges, a dotted amount at the center of gravity or around the entire perimeter of the adhesive.

Cleaning the surface from excess glue

After the distribution of the mass over the part, pressing is performed. In the marked place on the base, first the corner is pressed, then the entire element.

"Express" needs a few minutes to fully set. The final cleaning work is carried out after a few hours. The excess is removed with spatulas, a damp soapy cloth. The rag is handled carefully so as not to dislodge the fresh glue.

"Installation Express" is an excellent replacement for dowels, nails, screws and other fasteners that spoil the interior aesthetics of the house.

Pros and cons of using

Comparing this material with other adhesives that are suitable for construction and repair, the following pros and cons of their operation can be distinguished.

Attention!

The service life of such glue rarely exceeds 12 months.

What it is

When buying liquid nails, not everyone reads the instructions for use. The material is so widespread and accessible that it seems that no surprises can be expected from it. But this is not so, since under the general name there are several solutions that are different in their characteristics. Initially, the glue consisted of synthetic rubber with the addition of polymers.

When it first appeared, especially plastic clay, which was mined in Texas, was used as a fine filler. Since such raw materials could only be used in America, and the adhesive was successful, experiments began with other additives. Thanks to this, many varieties of the product appeared, but the name has been preserved.

Instagram pozitiv_magazin_krasok

The range of liquid nails is very wide. Under the general name, there are several solutions that differ in their characteristics.

What are they used for?

Recommended uses include a wide variety of products including wood, silicate glass, ceramics, plexiglass, aluminum alloys, natural cork, drywall, foamed plastics, siding coverings, wood fiber boards or shavings.

High-strength adhesives can be used to fix sinks and other sanitary ware, window and door frames, skirting boards, countertops and mirrors. Sometimes craftsmen use liquid nails instead of sealants, they are used to insulate seams, fill micro cavities, cracks in walls, ventilation ducts, corner joints of design structures.

Squeezing out a pistol

With a large amount of work, it makes sense to use a special gun, which will reduce the consumption of the product and facilitate the application procedure. By the principle of operation, pistol devices are similar to syringes; the entire body or half of the tube body can be inserted into the pumping structure; sometimes it looks like a skeleton on which a packaging container with glue is fixed.

In convenient models, a reverse stroke is provided, which significantly speeds up gluing, which is especially important in industrial conditions. If you are constantly doing large amounts of work with adhesives, it makes sense to use a gun that runs on electricity.

The technical features of the units are indicated in the accompanying instructions, the reading of which should not be neglected.

Specifications

The main features of Moment Montage liquid nails from the rubber family include the following:

• the composition contains harmful volatile substances, hence the pungent smell; during operation, it is recommended to ensure good ventilation of the room;
• has high moisture and frost resistance (up to -40 ° C);
• it is assembly, but can also be used as a sealant;
• works with almost all materials;

• better than acrylates for bonding smooth and non-absorbent surfaces;
• some species have an instant grasp;
• storage temperature ranges from -20 to + 30 ° C (after defrosting, it fully restores its properties);
• shelf life - 18-24 months;
• sold both in cartridges and in tubes weighing 125–400 g;

• working temperature - from -12 to + 35 ° C;
• working time - 10-30 minutes (depending on the type of glue);
• setting occurs after 24 hours; the time of complete drying depends on the external temperature and air circulation, but not more than 7 days;
• cleansed with white spirit;
• most adhesives are beige.

The technical characteristics of the water-based adhesive mixtures are as follows:

• no pungent odor;
• waterproof and frost-resistant (up to -20 ° C);
• suitable for mounting a wide variety of materials;
• the surface must absorb moisture;
• storage temperature - from +5 to + 30 ° C;

• shelf life - 18 months;
• is produced in the form of a cartridge and a tube, weighing from 125 to 400 g;
• can be used for indoor and outdoor use;
• working time of glue - from 5 to 15 minutes;

• painting after drying is possible (it is recommended to use acrylic paints);
• high primary gripping force;
• excess uncured mixture can be easily removed with a damp cloth;
• the color of the glue is white, some become transparent after drying.

Mounting universal mixes based on polyacrylates

All these mixtures have one thing in common - odorless and anti-allergic qualities. Compounds of this type are not intended for bonding Teflon, polyethylene. To obtain a strong bond, it is advisable to use the compositions for gluing two surfaces, one of which is capable of absorbing glue. They have similar applications and shelf life (18 months). They differ in the volume of packaging, the speed of primary setting.

The formulations are available in white or transparent. It depends on the type of polyacrylate isomers used in the mixture. Information about the color is already contained in the names of this or that product in this series.

Installation Superstrong MVp-70 is a white paste-like mass. It is produced in tubes for a plunger gun weighing 400 g. It has a high degree of primary setting (70 kg / m²). The time before the start of intensive polymerization after application to the surface is up to 15 minutes.

Super strong glue MVp-70 is used for gluing wood (wall panels), ceramics, polystyrene (curly ceiling cornices, baguettes). Withstands heavy loads, therefore, with its help, even heavy solid wood panels are glued. Moment Superstrong MVP-70 can be used both for interior work and on the street. This adhesive does not decompose or depolymerize over time.

Henkel manufactures Super Strong Plus acrylic adhesive with increased first-set strength, up to 100 kg / m². The manufacturer admits the possibility of using this composition for the installation of door blocks.

Moment Super Strong Plus MV-100

Compositions Express MV-50, Express Decor MV-45 are specially designed for finishing work. With their help, quick installation of friezes, skirting boards, and other decor is carried out. The initial setting strength of the compounds is lower (45 kg / m²), therefore they are used for gluing light objects. Available in 250 g tubes or 450 g cartridges.

Express Decor

How to remove protruding adhesive

When working with glue, it may get on the front of the parts to be fastened. In this case, wipe off the drops quickly. It is better to do this with a cloth soaked in a solvent containing acetone. It is suitable for all types of liquid nails, but still gives a subtle result so it should not be over-tightened. If the composition is already dry, then the solvent will only help in conjunction with mechanical cleaning. A good result is obtained by heating the hardened glue with a regular or construction hair dryer. When the surface temperature rises to 50-60C, the nails become softer, which makes them easier to tear.

If liquid nails get on your clothes, this does not mean that they will have to be thrown away. You can use Antikley to clean the fabric. Although this solvent is ineffective on glued items where the glue is used in a thick layer, it often does the job on clothing. The disadvantage of this method is the ability to change the shade of the fabric. For sensitive items, it is best to first warm up the nails with a hairdryer or iron and then put the clothes in the freezer. As a result of a sharp change in conditions, the glue will lose its properties. After freezing, it will be possible to rip it off. This is a good way, but it is ineffective on knitted items.

If you need to clean your soiled hands with acrylic-based glue, you just need to wash them with soap and water. Formulations with artificial rubber are washed off the skin with petroleum jelly or vegetable oil.Considering all the difficulties with cleaning, it is much easier when using liquid nails to protect the edges of the parts with masking tape so that you do not scrub anything later.

Views

The "Moment Montage" line includes about sixteen products. Depending on the materials and the complexity of the upcoming work, you can easily choose the most suitable adhesive composition. It is determined by the corresponding marking (MB and MP). The numbers next to it indicate the initial setting strength (kg / m²).

"Moment Montage - Express" MV-50 is used for all types of work. It does not contain solvents, is moisture resistant, and is suitable for the installation of wood, PVC and insulation panels. It can be used to attach skirting boards, door frames and decorative elements.

• “One for everything. Transparent ”has the same properties as Super Strong. Often used for urgently sealing joints underwater, but not suitable for permanent immersion. It has a shorter shelf life, only 15 months.
• "Moment Montage - Express" MV-50 and "Decor" MV-45 are characterized by fast gluing, used for fixing decorative elements made of various materials. The best adhesion will be on hygroscopic surfaces.
• "Moment Installation. Waterproof "MV-40" is characterized by resistance to moisture class D2 and versatility, provides a strong bond of any materials.

• "Moment Installation. Superstrong "MVp-70 Transparent glues quickly enough, while the load is up to 70 kg / m². It is used for the installation of wall panels and decorative elements. On sale there is a super-strong MB-70 white.
• "Moment Installation. Superstrong Plus "MV-100 has the same technical characteristics as Superstrong MV-70, only the gripping force is much higher - 100 kg / m². For fastening heavy elements, it does not require supports and clamps.
• "Moment Installation. Extra strong "MP-55 is presented on the basis of rubber, suitable for heavy structures, holds any materials.

• "Moment Installation. Universal "MP-40 is presented on the basis of synthetic rubber, while being easily washed off. It is suitable for fixing fiberboard, concrete walls, marble or natural stone masonry, polystyrene bathtub panels, fiberglass, glass surfaces. Bonds quickly, reliable. Can be stored at sub-zero temperatures down to -20 degrees.
• "Moment Montage for Panels" MP-35 is specially designed for fixing polystyrene or foam panels. It holds together the same materials as the Universal MP-40, is characterized by strength, but is easily washed off before hardening.

• "Moment Installation. Instant grip »MP-90 grasps perfectly from the first minutes of use, glues surfaces that do not absorb moisture. It perfectly holds polystyrene, polystyrene, brick, plywood and stone together.
• "Moment Installation. Transparent grip »MF-80 is made on the basis of Flextec polymer, it sets quickly. It can be used as a sealant, is transparent and does not contain solvents. It is suitable for smooth, non-absorbent surfaces.

• “The Moment of Fix. Universal ”and“ Expert ”. The fixation is almost instantaneous, the setting force is 40 kg / m². Used only for indoor work. If glue is not used, it must be kept closed, as it quickly forms a film. It is designed for the installation of ceiling tiles, floor skirting boards, wood and metal decorative elements, sockets, wood wall panels, as well as for filling gaps up to 1 cm.
• "Moment Installation. Polymer "glue is a composition based on an acrylic water dispersion, it is not liquid nails. It has excellent adhesion, becomes transparent when dry, and is used to fill deep gaps. They can glue paper, cardboard, polystyrene, wood, parquet mosaic, expanded polystyrene, PVC. Available in bottles.

Specifications

The attractiveness of mv-50 in the construction market is due to positive reviews based on the following important characteristics:

• Moisture resistance. Has the ability not to absorb moisture in contact with the solidified surface. To maintain its ability, it is advisable not to dilute the glue with water.
• Frost resistance. The retention ability does not disappear due to freezing, which allows you not to worry about temperature changes. The glued elements will not fall or be damaged.
• No solvent required. With proper transportation and closing at the end of operation, the "express" does not freeze, therefore, the "liquefaction" of the adhesive composition is not required. The thickening mass is suitable for use, or mixing with "fresh" is allowed.
• Rapidity. The presented "liquid nails" set at a high speed, which speaks of energy savings - you do not need to hold the glued element, wait for the setting.

Pay attention that one of the surfaces (which is glued or glued to) necessarily absorbs moisture. Otherwise, the adhesion is low, which either will not allow the elements to glue together, or will make the fastening fragile.

The composition is suitable for work at temperatures from 5 degrees above zero Celsius.

Composition of liquid nails

Of great importance for the work and use of liquid nails is their chemical composition. The composition of the adhesive determines its characteristics and application.

Water-soluble or polymer nails are made on the basis of polyurethane or acrylic. More often than not, you'll see the adjective "acrylic" in their name. These compounds do not smell, the excess is easily washed off with warm water, the tool and hands are easy to wash, they do not burn. However, acrylic liquid nails are afraid of water, moisture, frost and cannot be applied in a large layer.

Related article: Modern materials for waterproofing

Adhesives based on synthetic binders, rubber or resin, form a strong crystal lattice, even when applied in thick layers. However, such adhesives smell strong and can only be washed off with solvents. It is unlikely that you will set them on fire, but they burn well, although they are not afraid of frost.

How to work

Liquid nails are sold in tubes or special tubes. To work with tubes, you need to purchase a special construction gun for sealant (as sellers call them).

Tool

Sealant guns are:

• Open, semi-hull and hull (closed);
• Mechanical and pneumonic.

The most acceptable option for use in household repairs is a semi-case mechanical pistol.

Related article: Kitchen renovation by photo: analysis of kitchen renovation 8 meters in a panel house

It is more convenient to work with a closed mechanical pistol.

Before applying liquid nails, it is imperative that you prepare the surface. Remove dirt, dust and old sealant.

In the event that you work with metal, be sure to remove the rust, and also degrease the material.

The glue is applied to one or both surfaces (read the instructions on the package). Glue is applied pointwise, in a snake or in stripes.

The thickness of the application depends on the selected type of adhesive. Let me remind you that water-based adhesives cannot be applied in a thick layer.

Usually, the glue is applied to the product to be glued. When gluing, for example, the wall panel of the apron to the kitchen wall, the apron is neatly pressed against the wall. Offsets of the apron along the wall are unacceptable.

Liquid nails are seized, more often in 10-15 minutes, but there are options for a 40-minute setting. While the nails are setting, it is better to press the product to the surface. It is enough to press the product with your hands for 2-3 minutes, then make an emphasis or squeeze it with a load

It is especially important to press on the product that is glued to the ceiling, for example, ceiling tiles.

The glues dry for 12-24 hours. The manufacturers indicate the more exact period that is required for drying on the packaging or in the instructions for this product.

A large number of brands of liquid nails with basic and additional properties, make you give advice:

About liquid nails

With the help of liquid nails, you can connect a variety of materials, for example, wood, plastic, glass or drywall, ceramic tiles.

In kitchen renovation, liquid nails are more often used to glue the kitchen panel over the kitchen work surface, as well as when installing a new window sill and other installation work.

pros

Using liquid nails to fasten something, as opposed to using mechanical fasteners, has a number of advantages:

• First, it's fast;
• Secondly, there is no need to damage the mounting surface and the product itself;
• Thirdly, you do not need an additional tool (drill, punch) for fastening;
• Fourthly, products that are not attached to screws can be attached to liquid nails. For example, mirrors or a glass apron for the kitchen.

Minuses

Liquid nails have negative qualities that you need to know about:

• First, they are not transparent;
• Secondly, liquid nails dry for a relatively long time and for the time of setting, the product must be held on the surface;
• Thirdly, when dry, visible residues of liquid nails begin to turn yellow.

Liquid nails based on silane polymers

Henkel technologists are actively looking for new materials and technologies that increase the capabilities of the adhesives produced. The use of silanes for curing polymers is an innovative method.

Silanes are a compound of silicon and hydrogen with properties similar to hydrocarbons, but showing greater reactivity. They are the starting material for the production of many polymers, including silicones. In the composition of mixtures with polymers, the crosslinking of molecules by reaction with water and adhesion to the surface are improved.

MS-Technology MSP-90 formulation contains FlexTec's proprietary silane-modified polymers. It is a jelly-like mass of white. The initial setting of this material is 50 kg / m². Final up to 90 kg / m². Differs in durability, high adhesion to any surfaces.

The adhesive connection is hermetically sealed. Does not contain toxic solvents. Unlike most other compositions, after solidification, it practically does not shrink. They work with this glue at positive temperatures. Available in 280g cartridges.

Extra strong MP-55

The Moment trademark has been known to our consumers since 1979, having gained popularity over the past time and has become a household name. And today the company maintains its reputation by producing quality and inexpensive products.