Alpina paint (29 photos): colors for interior work, features of interior paint and stylish solutions for the bathroom and kitchen, reviews

Choosing interior wall paints, what is important to consider?

So, before proceeding with the main part of the work, you will need to responsibly prepare the base on which the selected paint will be applied. The base should be perfectly smooth and free from defects on the surface, this will allow you to count on the maximum quality of the final result.

It is important to know that to paint m2 of area with one layer, it will take about 70 to 200 ml of paint, depending on the paint itself, the total volume of paintwork materials will not be difficult to calculate by the amount of area of the room, we multiply the result by two, since it is necessary to paint in two layers. Of course, when choosing, it is necessary to take into account the material from which the base is made, since the consumption for painting drywall or, for example, concrete will differ somewhat

The choice of interior paint must be carried out responsibly, the selected consumable must meet a number of stringent requirements:

resistance of the applied layer to ultraviolet exposure;
resistance to environmental influences of any kind;
have the ability to withstand moisture.

If the paints are selected correctly and applied taking into account all existing technologies, then we can safely expect that with their help additional protection will be provided to the base, thereby significantly increasing its operational life.

Application of Alpina paint for facade and interior work

The surfaces to which the coloring compositions are applied are cleaned of the old finish. Facades, walls, ceilings for decoration must be clean and dry. Cracks, crevices are repaired, other surface defects are removed by grinding. It is desirable that the plaster layer has good bearing capacity; for light plasters, thin-layer coatings are used.

The surfaces to which the coloring compositions are applied are cleaned of the old finish.

Features of application, how many layers are needed

Paint and varnish products are applied to previously prepared surfaces in three ways:

With a foam or fur roller, in this way it is convenient to paint a large area;
With a spray gun, paintwork materials have a low density, are used in industrial volumes at construction sites, during repair work;
With brushes of various widths, the mixtures easily paint over even the most inaccessible places.

German manufacturers are developing practical formulations that can be applied in one layer, a vapor-permeable moisture-repellent film is formed. Only surfaces that absorb paint well are coated twice.

German manufacturers are developing practical formulations that can be applied in one layer, a vapor-permeable moisture-repellent film is formed.

Paint consumption when painting flat surfaces (walls, ceilings, facades)

The exact amount of ml per square meter is indicated in the marking, on average from 80 ml (thin-layer paintwork materials) to 160 ml (mixtures with textural fillers, thick enamels). Usually, the consumption of facade paints and varnishes is higher than that of analogues for interior decoration.

The consumption of the finishing material depends on the structure of the substrate, the condition of the surface to be coated. Priming reduces the amount of paintwork used for painting.

The consumption of the finishing material depends on the structure of the substrate, the state of the surface to be coated.

With the help of products with the Alpina brand, they create stylish interiors, bright facades, and increase the service life of metal structures. It is better to purchase paintwork materials from official distributors, it is worth looking at the release date.Canned compositions retain their original properties for up to 2 years.

Methods and technologies for painting walls with Alpina paint

To paint the walls only at first glance seems to be a simple event, in fact, everything is not so. In some cases, only experienced craftsmen manage to cope with the work qualitatively. It is necessary to paint the walls in compliance with a number of rules and taking into account the following key steps:

The old finishing material is removed from the surface to be painted.
The base is carefully leveled, cement mortar and finishing plaster are used.
The working base must be primed. This is done in order to increase the strength and improve the adhesion of the paint to the base. Note that the primer should have a similar base with the paint, which will be further used in the work.
Additionally, the wall surface can be treated with an antiseptic and antifungal solution.
You can start painting the wall after all the applied layers are thoroughly dry. The paint is applied with a roller, brush or spray gun.

Interior paints of the Alpina brand are especially popular today, which is explained by the numerous advantages of the material. Therefore, if you want to purchase high-quality products at an affordable price, with the help of which it is guaranteed that you can implement qualitatively any design ideas of any complexity, then the purchase of Alpina interior paints would be an excellent solution.

Alpina paints

Compositions differ in basis, fillers. In the professional series, finely dispersed products are presented that are refueled into a spray gun. For home repairs, it is better to choose paintwork materials for working with a roller, brushes, they are thicker. All products are of good quality; mixes can be purchased at an affordable cost.

For home repairs, it is better to choose paintwork materials for working with a roller, brushes, they are thicker.

Material features

Any Alpina paint is characterized by high hiding power, economical consumption. Due to the good vapor permeability of the paint layer, the walls remain dry. A reliable, abrasion-resistant paint film that repels water and contains substances that prevent the appearance of mold and mildew.

Due to the good vapor permeability of the paint layer, the walls remain dry.

Specifications

The following performance properties deserve special attention:

Fast drying, the next layer, if necessary, is allowed to be applied after 2–4 hours, the finishing varnish layer can be applied after 6–8 hours, when the formed film has finally hardened;
Hermetically sealed packaging.

Consumption, density of compositions differ depending on the constituent components.

Advantages and disadvantages of acrylic-based interior wall paints

The modern market is overflowing with offers, so that the buyer has no difficulty in choosing and buying consumables that are necessary to perform the planned types of work. Acrylic-based paint can be applied to substrates made of almost any material, the main thing is that the work surface must be carefully prepared. The popularity of the material is due to the presence of the following advantages:

Durability of use, the applied layer does not fade in direct sunlight, the paint does not crack with sudden changes in humidity and temperature.
The paint is excellent for finishing walls and ceilings in rooms with various functional purposes.
Affordable cost, which will allow you to purchase consumables inexpensively in the amount of interest.
The paint dries quite quickly after application, which allows you to perform large volumes of work with high quality with little loss of time and effort.
A large selection of color schemes, so that the material can be easily selected for the implementation of design ideas.

Like any other modern material, the products in question have disadvantages, the main ones are:

Some coatings attract dirt and dust, but they can be easily removed with a damp sponge.
After the applied layer has dried, it is almost impossible to remove it without using a special tool.
The application of paint should be carried out clearly according to the manufacturer's instructions, the quality of application is ensured subject to the use of a professional tool and experience in performing such work.

Types of paints of the Alpina brand

Water-based (dispersion) compounds and latex dyes have been developed for interior decoration. The mixtures contain antifungal components. Acrylic - universal, suitable for all types of surfaces, including plastic.

There are three types of metal mixes:

Heat resistant for radiator;
Hammerhead, creating the effect of a matte roughness;
For rust containing reducing agents, anticorrosive agents.

The most popular paints are worth considering in detail.

Water-based (dispersion) compounds and latex dyes have been developed for interior decoration.

Alpina Aqua Buntlack - water-borne tinted enamel

Universal composition, dries within 2 hours, hardens within 8 hours. Creates an easy-to-clean, porous film. It is applied on primed or pre-treated wooden surfaces, drywall, concrete, masonry, plaster.

Universal composition, dries within 2 hours, hardens within 8 hours.

Alpina Direkt auf Rost Hammerschlageffekt - enamel directly on rust hammer effect

In the Alpina lines among paints for metal, enamel combines three properties:

Decorativeness - a hammer effect is created;
Protection of steels from oxidation;
Also used as a rust primer.

They differ in low consumption (100-120 ml), applied in one layer.

Alpina Expert Facade Silicone - water-dispersion silicone-modified paint

Creates a matte effect on concrete, plastering, primed insulation sheets. The resulting film is resistant to dirt and comes in a variety of colors. It dries up within 2 hours, the varnish finishing layer can be applied after 6 hours. It is distinguished by its durability.

Creates a matte effect on concrete, plastering, primed insulation sheets.

Alpina Die Langlebige fur Holzfassaden - durable paint for wooden facades

The uniqueness of the facade coating for wood is the ability to emphasize the natural structure of wood. The thin-layer composition contains antifungal components, creates a film that is resistant to atmospheric precipitation, temperature changes, and is not prone to cracking.

The uniqueness of the facade coating for wood is the ability to emphasize the natural structure of wood.

Alpina Aqua Weisslack - water-borne enamel for wood and metal

The snow-white mixture, which creates a silky-matte finish, is allowed to be tinted, used for facade and interior decoration. Alpina acrylic paint is diluted with water, applied in one layer, the film hardens in the open air.

The snow-white mixture, which creates a silky-matte finish, is allowed to be tinted, used for facade and interior decoration.

Alpina Die Edle fur Innen - noble interior paint

It is recommended to cover the wallpaper with a latex mixture, a thin translucent layer is formed, resistant to external influences, preserving the original structure. It is better to paint mineral substrates in two layers, especially in places where there are strong loads. The film is not destroyed by detergents, is not afraid of wet cleaning.

It is better to paint mineral substrates in two layers, especially in places where there are strong loads.

Alpina Die Samtene fur Innen - velvet interior paint

The composition is designed to create exclusive interiors. This Alpina interior paint for interior works has a top-class hiding power, the mixture is equally well applied to any surface, including structural wallpaper, and creates a healthy microclimate. It is appreciated for the decorative effect created by finely dispersed natural ingredients. The film is resistant to cracking, retains its elasticity for a long time.

The composition is designed to create exclusive interiors.