Dimensions (edit)
Press washer nuts can be of different sizes
It is necessary to pay attention to this before purchasing. Indeed, in this case, the choice will depend on which parts will be connected to each other, their sizes
The main parameter is the diameter of the fastener. The following values are considered the most common: M6, M8, M12, M5, M10. But there are also models with other parameters.
In addition, such nuts can be high or low, in this case the choice will also depend on the requirements for a particular type of connection. Often, elongated varieties are used not only to create a more reliable and durable connection, but also to make it outwardly more accurate.
You can watch a video review of various nuts below.
WHEEL NUTS FOR DISCS
To fasten the car wheel to the hub, a special type of fastener is used - nuts. The usual shape that automotive wheel nuts have is a hexagon. Currently, their assortment includes nuts, which can differ in many ways. This is not only the height of the nut, diameter and thread pitch, but also the appearance, strength class and resistance of the coating. Therefore, when planning to purchase disc nuts, you should not neglect the advice of professionals who will help you make the right choice.
Another parameter by which nuts can be classified is the material of manufacture. Standard products are usually made of steel. They are characterized by optimal strength and reliability, as well as an affordable price. To increase the protective properties of the metal, as well as to give the products an attractive appearance, a chrome-plated, galvanized or colored coating can be applied to the nut surface.
If wheel nuts have to meet certain specific requirements, they can be made of aluminum. Typically, these fasteners are used on racing cars. Their main difference is their low weight, as well as the increased softness of the metal. Such nuts have to be tightened quite often.
When tuning, titanium wheel nuts can be installed. They are extremely robust and lightweight. However, it must be borne in mind that their cost is much higher than that of other fasteners for a similar purpose.
Stamped and alloy wheels require different types of nuts. This is due to the fact that very often it happens that spherical wheel nuts are used on cast discs, and cone wheel nuts on stamped discs. Also, most often, open-type wheel nuts are used on stamped discs, and closed-type wheel nuts on cast discs. This requirement is fully met by high-quality wheel nuts from the manufacturer "Wheel Fasteners". One more point: since the metal of the alloy wheels is relatively soft, at first, after their installation, it is advisable to check the degree of tightening of the nuts and bolts.
In our company you can buy wheel nuts for various types of modern discs. Having specialized in the production and supply of fasteners for automobile wheels for a long time, we have established relationships with a number of reliable foreign factories. This allows us not only to guarantee high quality products and a wide range of products, but also to set affordable prices for all types of products we offer. You can buy nuts for Ford alloy wheels from us and for almost all passenger car brands. Our experts will help you with the choice of fasteners, and you can be sure that you will get exactly the nuts that fit your car and rims. Thus, you will ensure not only driving comfort and safety, but also an attractive exterior of your car.
Wheel nuts wholesale and retail: a large selection and excellent quality
Have you decided to order wheel nuts in bulk and are you looking for a reliable supplier? Do you need quality products? The company "Wheel Fasteners" will help you. We are chosen for several reasons:
• Wide choose. The catalog includes over a thousand product names. You can find what you need.
• Delivery. In Moscow, products are sent to wholesale buyers free of charge, check the terms of delivery to other cities with the manager. We are sure there will be a solution. For retail buyers, there is urgent delivery, evening delivery and weekend delivery.
• Reliable products. We offer products of our own production and are responsible for the quality of our products. All products are certified.
If you need wheel nuts wholesale and retail, you can contact our specialists by phones: 8 (499) 343-92-24 or 8 (926) 623-27-14.
Wheel nuts
|
1
Table |
Tile
|
Detailed description |
Vendor code: 80144535L thread: 12x1.5 height, mm: 35 clamping surface: cone open / closed: closed coating: chrome key: 19 mm |
45 rubles / piece |
|
Detailed description |
Vendor code: 801445E thread: 12x1.5 height, mm: 32 clamping surface: cone open / closed: closed coating: chrome key: 19 mm |
45 rubles / piece |
|
Detailed description |
Vendor code: 80144535VZ thread: 12x1.5 height, mm: 35 clamping surface: cone open / closed: closed coating: zinc key: 19 mm |
45 rubles / piece |
|
Detailed description |
Vendor code: 80144528L thread: 12x1.5 height, mm: 28 clamping surface: cone open / closed: closed coating: chrome key: 19 mm |
45 rubles / piece |
|
Detailed description |
Vendor code: 801345BC thread: 12x1.5 height, mm: 32 clamping surface: cone open / closed: closed cover: black key: 19 mm |
1600 rubles / pcs. |
|
Detailed description |
Vendor code: 401445BC thread: 12x1.5 height, mm: 35 clamping surface: cone open / closed: closed finish: black chrome key: 19 mm |
80 rubles / piece |
|
Detailed description |
Vendor code: 200045XL thread: 12x1.5 height, mm: 32 clamping surface: cone open / closed: open coating: chrome wrench: internal hex 12mm Nut suitable for wheels with narrow rim holes |
45 rubles / piece |
|
Detailed description |
Vendor code: KK200045XL thread: 12x1.5 height, mm: 32 clamping surface: cone open / closed: open coating: chrome wrench: internal hex 12mm The nut set is suitable for wheels with narrow rim holes. The set includes 20 pieces and 1 key |
1200 rubles / set |
|
Detailed description |
Vendor code: 911145SD thread: 12x1.5 height, mm: 35 clamping surface: cone open / closed: closed coating: chrome key: outer 6 beams Nut suitable for wheels with narrow rim holes |
65rub. / Pcs. |
|
Detailed description |
Vendor code: KK911145SDBKE thread: 12x1.5 height, mm: 35 clamping surface: cone open / closed: closed finish: black chrome key: outer 6 beams The nut set is suitable for wheels with narrow rim holes. The set includes 20 pieces and 1 key |
1600 rubles / set |
|
Detailed description |
Vendor code: KK200045XLBL thread: 12x1.5 height, mm: 32 clamping surface: cone open / closed: open finish: blue chrome wrench: internal hex 12mm The nut set is suitable for wheels with narrow rim holes. The set includes 20 pieces and 1 key |
1600 rubles / set |
|
Detailed description |
Vendor code: KK200045XLBCN thread: 12x1.5 height, mm: 32 clamping surface: cone open / closed: open finish: black chrome wrench: internal hex 12mm The nut set is suitable for wheels with narrow rim holes. The set includes 20 pieces and 1 key |
1600 rubles / set |
|
Detailed description |
Vendor code: QK200045XLGD thread: 12x1.5 height, mm: 32 clamping surface: cone open / closed: open plating: gold chrome wrench: internal hex 12mm The nut set is suitable for wheels with narrow rim holes. The set includes 20 pieces and 1 key |
1600 rubles / set |
|
Detailed description |
Vendor code: KK200045XLRD thread: 12x1.5 height, mm: 32 clamping surface: cone open / closed: open finish: red chrome wrench: internal hex 12mm The nut set is suitable for wheels with narrow rim holes. The set includes 20 pieces and 1 key |
1600 rubles / set |
|
Detailed description |
Vendor code: DST20A36 thread: 12x1.5 height, mm: 36 clamping surface: cone open / closed: open coating: zinc key: inner star 10 rays Nut suitable for wheels with narrow rim holes |
45 rubles / piece |
|
Detailed description |
Vendor code: 341145KK thread: 12x1.5 height, mm: 33 clamping surface: rotating cone open / closed: closed coating: chrome key: 19 mm One-piece nut for cast, original Ford and Volvo rims |
95 rubles / pcs. |
|
Detailed description |
Vendor code: 341145Cap thread: 12x1.5 height, mm: 30 clamping surface: cone open / closed: closed coating: chrome key: 19 mm One-piece nut for cast original and stamped Ford and Volvo rims |
95 rubles / pcs. |
|
Detailed description |
Vendor code: 311345 thread: 12x1.5 height, mm: 33 clamping surface: cone open / closed: closed coating: chrome key: 17mm |
45 rubles / piece |
|
Detailed description |
Vendor code: 701145 thread: 12x1.5 height, mm: 26 clamping surface: cone open / closed: closed coating: chrome key: 21mm |
45 rubles / piece |
|
Detailed description |
Vendor code: 601145 thread: 12x1.5 height, mm: 25 clamping surface: cone open / closed: closed coating: chrome key: 19 mm |
45 rubles / piece |
|
1
What are they?
These nuts can vary depending on the accuracy class. They are determined according to established standards.
- Class A. Models from this group belong to samples of increased accuracy.
- Class B. Such products are classified as normal accuracy.
- Class C. These nuts with a press washer are included in the coarse accuracy group.
Nuts also differ depending on the material from which they are made. The most common options are models made of steel (stainless, carbon). Such samples are considered the most durable and durable. But there are also options made from copper, brass, and other non-ferrous alloys.
At the same time, all models are coated with protective coatings during production. Most often, zinc compounds are used for this. But there can also be products treated with nickel or chrome. Some parts are produced without a protective coating, but these types can quickly become covered with corrosion, which further entails a breakdown of the connection.
These fasteners also differ in the strength class to which they belong. They are indicated by applying small dots to the surface of the products.
All fasteners of this type are classified into three separate groups depending on the finish. Clean models are completely polished during creation with special tools. All their sides are as smooth and neat as possible.
Medium samples are ground only on one side. It is this part that is attached to the product being fastened. Models with a black finish are not sanded with tools at all when created. In terms of thread pitch, all nuts can be classified as standard, large, small or ultra-fine models.