How to choose a spray adhesive?

Safety and recommendations

Compliance with safety measures when working with glue, as well as with other chemical compounds, is mandatory:

work only in a ventilated area;
protect hands with gloves, work in overalls;
do not smoke during work, exclude other possibilities of contact with fire, otherwise the product may explode;
in case of contact with skin, wash it immediately with soap;
wash clothes soiled with glue immediately;
do not put glue next to alkalis, acids, near the battery - it may deteriorate;
close the glue cap tightly outside of its use.

Do not use glue after the expiration date has passed - the level of its adhesion to materials decreases. Some adhesives (for example, acrylic) are almost odorless, but in the presence of organic solvents in the composition, you still need to work with them using personal protective equipment.

Instructions for use

In order for the work to be carried out correctly, you must adhere to the instructions:

The surfaces to be glued are thoroughly cleaned and degreased.
The balloon is shaken for 5-10 seconds.
The glue is applied from a distance of 15 centimeters evenly on two surfaces to be glued.
It is held for an interval of 15 seconds for the solvent to evaporate from the surface (if the glue does not remain on the fingers, then the evaporation has passed).
If necessary, re-spraying is carried out, then wait again.
Press down firmly to ensure full contact.
If necessary, place a load or clamp it in a yew.
After the completion of the work, the cylinder is turned over and air is released through the atomizer, then it is wiped by itself, the cylinder is closed with a lid.

Useful video on the topic:

Safety and recommendations

To work safely, you must follow the safety rules, recommendations:

The cylinder contains a flammable substance, so the spraying is done away from the fire source, heating appliances.
The cylinder is under pressure; its storage near heating devices and other heat sources is prohibited.
The work must be carried out in means of IZ, which prevent the spray from entering the respiratory tract and on the skin, mucous membranes.
Do not store in direct sunlight.
Do not pierce empty cylinders, do not throw into fire.
In case of contact with eyes or skin, thorough rinsing is carried out with running water.

Communities ›New Salon› Blog ›Multi Spray Glue

I would like to hear opinions and feedback on working with this glue. Because opinions differ. Namely, does it adhere well to leatherette and does it withstand the summer heat? Will be glued to door cards, racks and ceiling

Comments 52

glue is not ice. Better 88

glued such door cards, they hold normally, but I think it will not go to the ceiling and racks!

long ago subscribed to the orange one, but the former owner sold it and she was lost from sight, throw off the link to her new owner, I wonder whose hands she fell into, and how her future fate developed ...

Take Scotch-Weld 80 and enjoy simplicity and reliability. Plasticizer resistant, temperature resistant up to 93 ° C

glued the carpet, fell off in the sun.

I glued the ceiling, held on for a year - then one fine summer day, almost all of it peeled off, at first a piece, then again and again ...

glued the carpet on the roof, in the summer, everything was glued fine, but as soon as the sun heated the roof, this carpet just slid down, in short, this glue is now used for pasting boxes for subs, boxes.

That's why I’ll start this business, just yesterday I took the din, and I’ll assemble the box myself. And that leatherette will take shoe glue

Look in my BZ what this glue + leatherette has become. However, there is a but - I glued directly to the old coating and did not rip it off.Although in any case, when in the summer I tore off this parachute, the glue directly with my fingers felt shorter in the summer it is p.ts)

After half a year, the door cards peeled off :-(

It's good that I first asked), otherwise many people are chasing him

Yeah, better moment at the bank :-)

I do not recommend it unambiguously! It is not heat-resistant; in the heat, the entire roof bubbled up. I admit it sticks quickly. But then I pulled off the fabric heating the roof in the sun. Alas, everything is described on the side. I glued 88 for the second time.

suitable for gluing the carpet to plywood, for more embossed and critical surfaces I would not use

For these purposes, he took it, yesterday he took the Ural as12.3 carpet and the glue came here)

I re-glued the entire interior with such glue, glued to leatherette, while everything is holding up perfectly

how much time has passed?

have not seen the heat yet?

there is no sunny, but the salon was heated with a stove before winter to 70 degrees, and nothing

Read on the balloon! This is a temporary adhesive. Well suited for removing the cut using non-woven fabric (in my BZ you can see the record on the front door constriction). More he is not capable of anything and will come off 100%.

I used nuclear glue. After 2 hours it pulls out what I glued on. Look in my BZ, it is written

tell me where did you buy it?

In our city in a store that sells everything for shoe repair

dear bea glue (

your spray will not be enough for half of what I did, plus everything will fall off POSSIBLY, but I definitely don't) 500r per kg is expensive?

I found in the internet for 2200 for 1.5 kg))))

in the internet it is 280 rubles per bank

oh, it turns out that 15 kg costs 2200) in short, do you advise? How long does it take for the smell to disappear?

doesn't stink? Well, thanks, otherwise I would have zaherachil on this, then swearing!

not very glue and does not stink like a black japanese

your spray will not be enough for half of what I did, plus everything will fall off POSSIBLY, but I definitely don't) 500r per kg is expensive?

What kind of glue? I didn't find you

my ceiling fell off as soon as the hot weather came

The cartoon does not keep at a temperature. take shoe glue. it is completely inexpensive, comfortable and can withstand the summer heat. glue SAR-306

generally I don't recommend it. bad glue

tried such glue. clits pretty well. but in the summer, in the heat, all the material will come off. the ceiling was glued with a Carpet. and one day, in the heat, the entire ceiling peeled off and sagged. I didn't like it. best to glue for a moment

well, I'm asking about this, many write that in the heat he is not at all

I didn't like it, about 50% peels off

Tarpedo, ceiling, door cards. glued suede, eco leather on different surfaces and most of it peeled off, and then the sun warmed up and it became even worse))) better than the moment until I found nothing, but now I found the moment spray, it is also nothing

moment 88? and what is the moment of the spray? google right now)

I did not find the moment 88, I glued it with an ordinary universal, but I buy the spray in Estonia, in Russia in my region I have not seen it

I had to work with such glue, albeit with a carpet. It is convenient to work, it adheres well, but over time it either dries up or is absorbed into the carpet, in general, after 1.5 years, the carpet peeled off in some places, but it was in the places where the carpet had to be pulled. in general, if you glue leatherette without strong tension, it will fight.

on the ceiling, in some places you will have to pull sensibly

In general, when I studied the issue of stretching the panel with leatherette, one work was described using shoe glue. The author drew attention to the fact that the dashboard is exposed to sunlight and high temperatures, which is why he advised not even 88 glue, but shoe glue. Maybe you should learn from this experience?

Types and scope of application

Compositions for paper and textile materials. Such mixtures allow substances to be fixed only for a certain time. After some time, the two bonded parts are easy to detach. At the same time, no aerosol traces remain on the inner surface.
Adhesive for foil and films. Mounting mortars are used for permanent bonding of such substances. The aerosol evaporates completely at the application site.
Compounds for gluing polyethylene and other polymers to metals and wood. Among the positive characteristics of these aerosols, one can single out a high setting coefficient.

Depending on the purpose and environment of use, aerosol adhesives can be divided into several subspecies.

Rubber glue. Such products are made on a rubber basis, which allows you to obtain high-quality fixation of the product. At the same time, the composition does not destroy the structure of the rubber, and also does not contribute to its cracking or drying out.
Spray for plastics and metals.
Mixes for joining various types of carpet materials (carpet, etc.).
Universal adhesive. These products are used for bonding several types of materials (3M and other brands). But it should be understood that more specialized formulations are often better than universal counterparts.

The scope of application of aerosol glue is very wide.

Furniture manufacturing. Here, with the help of such glue, wood elements are fixed to each other. They can also be used for sheathing wood with various types of fabrics or plastic elements.
Construction works. The glue is used for interior decoration (medical institutions, offices, etc.). Quickly adheres to various materials for an almost instant effect.
Advertising production. In this area, adhesives are in demand that are capable of working both with plastic and various polymers. With their help, rather complex curly decorative designs are created.

The textile industry and the field of obtaining a variety of artificial fiber materials.
Automotive industry. Today, it is in this industry that aerosols are used very often. Here, with the help of adhesives, almost all the decoration is attached, as well as plastic elements. This allows you to completely eliminate double-sided tape, which does not always hold the parts quite well. Also, these substances are very often used in the repair of cars (interior trim, vibration isolation, etc.).

Instructions for use

Before work, you need to thoroughly clean the base. This is a prerequisite, because without cleaning, degreasing, the adhesion of the composition may decrease. They remove all types of dirt, go over the details with sandpaper, then wipe the base with a solvent, alcohol. You also need to make sure that the product is completely dry.

Immediately before work, the glue must be brought into the room so that it warms up, then shake it to eliminate the appearance of sediment. When spraying, keep the spray at a distance of 15-20 cm from the part strictly parallel to it. This is the only way to spray evenly. Usually, two layers are performed, between which a temporary break of 10 minutes is made.

With high porosity of the material, the applied adhesive layer must be thicker. The same applies if the weight of the part is significant. When connecting thin materials, it is enough to glue one of them, thick objects handle everything from both sides. Full drying time is 30-60 minutes or more, depending on the type of composition. To preserve the glue until the next use, at the end of the work, you need to do the following:

turn the balloon over;
press the sprayer several times;
make sure that air has escaped from the cylinder;
turn the bottle over again, close it;
put into storage out of the action of bright sunlight, high temperatures (optimal conditions: + 5 ... + 30 degrees, a dark place inaccessible to children).

Types of glue

Spray adhesives are subdivided into the following types depending on properties, purpose, scope of application:

For rubber. Has rubber in its composition, does not destroy the structure of rubber, does not cause its deterioration, drying, delamination.
For metal or plastic. Typically, such agents are of the same composition, since they require approximately the same degree of strength.
For carpets, carpet. They are used directly for laying such coatings, are convenient to use, and reduce the operating time.
For paper, fabric.These products completely eliminate the appearance of marks on the surface.
For smooth materials. Most often used for bonding metal, foil, film, polypropylene.
Universal adhesive. Such a composition is suitable for absolutely all materials, even holds together dissimilar surfaces.

Spray adhesives tuskbond in Moscow

Yandex Market data from 11/21/2020 00:00

Adhesives Aerosol sprays Apollo

Aerosol glue Packing of 500 grams In a box of 12 cans the price is for 1 piece.

Moscow, st. Nagatinskaya, 16

Universal glue 'abro' Aerosol (326G)

Name: Universal glue 'abro' Aerosol (326G), Manufacturer Abro, Category: Autochemistry

Adhesives Sprays aerosol Sterling

The volume of the cylinder is 500 ml. The box contains 12 cylinders, the price is for 1 piece.

Moscow, st. Nagatinskaya, 16

Adhesives Sprays aerosol Tuskbond

Adhesive for fabric, laminate and more, aerosol, Tuskbond Packing 500 grams In a box of 12 cans, price for 1 piece.

Moscow, st. Nagatinskaya, 16

Adhesives, Adhesive aerosol for heavy materials High Strength Spray Adhesive, Krylon, Krylon

The glue allows you to reliably glue heavy, dense, porous and materials of different density. Surfaces to be treated: wood, metal, plastics and plastics, glass, plaster, ceramics, paper, papier-mâché, cardboard, laminate, particle and composite boards. The one-component formula is characterized by high strength and durability of the adhesive composition and increased adhesion to most materials.

Moscow, Kholodilny lane, 3

Adhesives, Glue aerosol odorless Low Odor, weight 311 g, Krylon, Krylon

Universal aerosol adhesive with an environmentally friendly formula, odorless for indoor use in a can, 311 gr. With it, you can glue lightweight materials or fix them on any surface. The composition is white, so that the boundaries of application are visible, and after drying it becomes transparent. Due to the special formula, the glue will not crack if applied to a flexible surface.

Moscow, Bolshaya Gruzinskaya, 42

Adhesives Sprays aerosol SinTex

Glue for foam rubber aerosol Packing 520 ml 12 cans in a box Homogeneous mass without lumps of pale yellow or red color Density: 1.1 plus-minus 0.01 at t 20С Solids content: 45 plus-minus 2% Dynamic viscosity at t 20С: VZ-246 (6mm) -20s Adhesive film: elasticly soft price for 1 piece.

Moscow, st. Nagatinskaya, 16

Adhesives Sprays aerosol Fentac

Glue for foam rubber aerosol, Fentac Packing 700 grams In a box 12 cans price for 1 piece

Moscow, st. Nagatinskaya, 16

Glue aerosol professional ABRO

High strength adhesive. Bonds in minutes. Ideal for applications where fast drying is required. Does not lose strength in a wide temperature range (from -23 ° C to + 93 ° C). Aerosol packaging provides uniform and accurate glue application, even in hard-to-reach places. Traces of glue can be easily removed with mineral thinner or gasoline.

Presto universal adhesive spray 400 ml

Universal aerosol glue. It is used for gluing paper, cardboard, wood, textiles, leather and various types of plastic. Aerosol packaging allows you to work with bulky items. An adjustable valve allows metering of adhesive use.

Adhesives, Aerosol Krylon Spray Adhesive, 311 g, Krylon

Aerosol non-shrinking adhesive for artistic and decorative work. Designed for mounting and fixing elements on the work surface. Acid-free - does not stain when handling paper, parchment, etc. Prevents the formation of wrinkles when fixing thin materials. Surfaces to be treated: paper, parchment, canvas, fabric, decorative elements, photographs, decoupage technique, posters, etc. The surface must be dry and clean, remove dirt, dust and oil stains.

Moscow, Kholodilny lane, 3

Aerosol glue "Stanger", bottle

Aerosol glue "Stanger", 150 ml, bottle.

Adhesives Sprays aerosol BondSeal

Glue for foam rubber aerosol transparent yellow Packing 500 grams In a box 12 cans price for 1 piece.

Moscow, st. Nagatinskaya, d.16

Uhu Universal adhesive POWER SPRAY contact, aerosol 500ml

Universal contact spray adhesive UHU POWER SPRAY glues almost all materials - both hard and soft, for example: paper, wood, metal, textiles, glass, ceramics, cork, most plastics, leather. By spraying, it can be applied extremely evenly and economically. The adhesive layer remains elastic and compensates for the tension of the materials, does not dry out over time. It can be used as a permanent contact adhesive and as an assembly adhesive with the possibility of adjustment.

Moscow, 4th Syromyatnichesky per., 1/8, bldg. 6

Famous brands producing adhesive sprays

Many newbies get lost when choosing spray glue, going to a hardware store or market. This is due to the large number of products from different manufacturers.

In the opinion of professionals, several names stand out, which are the most relevant, the best. Perhaps the most famous is 3m aerosol adhesive. It is necessary to talk about each of them in more detail.

3M Scotch-Weld

Ethyl cyanoacrylate adhesives that have a low viscosity index. Designed for gluing plastic, rubber. Resistant to prolonged exposure to moisture, however, the seams are destroyed by oil, gasoline. The operating temperature of the finished joint is from -30 to +100 degrees Celsius. Does not bleed into porous materials. They can be easily re-glued in case of an error.

Aerosol adhesive Abro

Adhesives of American production. They have several strengths:

Fast adhesion.
High adhesion rate.
Strong finished seam that can withstand heavy loads.

A special cap deserves special attention, which allows you to apply the adhesive mass in a thin layer.

Aerosol adhesive Multi spray

Multi spray aerosol glue has no analogues in the whole world. Its main feature is the ability to independently choose the strength of the seam. The main areas of application are the construction of ships, aircraft. The base need not be cleaned of dust before application. Suitable for gluing any materials.

Aerosol Ghiant Hobby Colle Permanent

An adhesive composition intended for permanent bonding of fabric, paper, cardboard, plastic, foam. Popular in creativity: models, decoupage, decor, etc. Thanks to a special cap, it is evenly applied to the glued surfaces in an even layer. Famous name Hobby aerosol stencil adhesive.

Aerosol Presto

Universal adhesives that are used to join wood, plastic, cardboard, fabric, paper, leather. Before application, surfaces must be cleaned of dirt, degreased. Presto aerosol adhesive should be used for fixing at temperatures from +15 to +25 degrees.

Done Deal Aerosol Adhesive

Done deal aerosol glue is a product intended for gluing leather, textiles, glass, rubber. It is used in repair shops, used for upholstering car interiors. They are made on the basis of rubber with the addition of butane or propane.

Aerosol Krylon spray adhesive

Glue spray, which is intended mainly for decorative work, design work. When working with paper, cardboard, fabrics, it does not leave marks. Before application, the surfaces are cleaned of dust, dirt, degreased. One of the components is an inert solvent that does not damage the foam parts.

Aerosol adhesive Tuskbond

An adhesive composition that is most often used in textile workshops. It can be used to reliably glue leather, fabric, velor, carpet, alcantara. Popular for repairing car interiors.

Aerosol Penosil

The aerosol adhesive most commonly used by finishers and builders.This is due to the fact that insulation materials, foam panels, skirting boards, ceramic tiles, and more are glued with Penosil. For application it is necessary to use an assembly gun.

Adhesive spray UHU Spruhkleber 3 in 1

A universal adhesive composition with which you can glue any materials - hard, soft (exceptions are silicone, polyethylene). The convenient cap allows you to reduce consumption by evenly applying the adhesive to the prepared substrates.

Spray Marabu-Fix it

Adhesive for temporary fixation. It is used for gluing paper, fabric, foil, photographs, napkins, newspapers, stencils. Leaves no residue after removal.

Conclusion

Aerosol adhesives are gaining more and more popularity among amateurs and professionals. This trend is gaining momentum.

With their help, you can easily glue almost any materials together. It is easy to apply them thanks to the special caps, liquefied gas. Adhesives in aerosol cans often have high adhesion to various surfaces and dry quickly after application.

Views

Depending on the time of exposure, aerosol glue is of the following types:

for short-term gluing - the composition is intended for temporary fixation of paper, fabric, used in repair work;
for long-term fixation - provides a longer and stronger connection of materials and parts, the subsequent dismantling of which becomes not always possible.

Depending on the material for which the glue is intended, the following types are distinguished:

for textiles and paper - usually these compounds have a temporary effect, and after the separation of the materials, they do not turn yellow, do not deteriorate;
for foil and film - provide both short-term and long-term fixation;
connection of polypropylene materials with wood or metal - such compositions demonstrate increased adhesion;
compounds for rubber - they are characterized by the fact that they do not destroy the structure of the material;
aerosol for carpets, carpet;
spray for expanded polystyrene - also does not harm the structure and integrity of the material;
compounds for plastic.

Finally, there are versatile versions available for joining most types of materials in all conditions. For drawing, use a special stencil glue. Before use, you must make sure that the stencils themselves will not be printed or soaked by the spray. The universal contact adhesive can be produced in cans and cylinders. Modification in a balloon is convenient when it is necessary to spray glue in hard-to-reach places. The cylinder is usually supplied with a hose and an applicator, so it is convenient to use it for applying adhesive over large areas. Mounting adhesive in the cylinder can also be used to seal joints and cracks on various surfaces made of concrete and plastic. For the same purposes, you can use a composition from a cylinder if it is equipped with a nozzle for a more accurate, less volumetric spray.

How to make the right choice

Opt for aerosol adhesives for their strengths. These include:

High strength, at the same time elasticity.
Fast adhesion.
Convenient to apply.
High adhesion rate to various substrates.
Ability to work with various materials.
Long shelf life.
Dosed consumption.
Safe for the human body (does not emit harmful fumes).

Before choosing an aerosol, you need to decide which materials will be combined most often

At the same time, it is required to pay attention to the operating conditions of the glued parts. The properties of the glue used will depend on this.

Aerosol adhesive technology

The quality of the connection depends on the correct choice of adhesive spray and the method of its application. Detailed instructions can be found on the back of the bottle. However, it will be useful for any beginner to read the recommendations of the professionals.

The technology consists of several stages that must go one after another:

Prepare the surface for work.Clean the glued sides from dirt, dust. Wipe with a degreasing agent, wait until the materials are completely dry.
Shake the can several times. Apply the adhesive mass by lightly pressing on the cap. If the whole product is heavy, cover both surfaces to be glued with glue, if light - one.
The distance between the balloon and the material during application should be about 20 cm.
After covering with the first coat, wait 10 minutes, apply the second.

Apply and wait 30 minutes until the adhesive dries.

Safety and work tips

To make a high-quality seam and not harm your body in this process, you must remember about safety precautions:

The room in which the work is carried out must have good ventilation.
Work with gloves and overalls.
Wash off the adhesive from the skin with soap.
Do not work near open flame sources.
After use, do not forget to close the bottle with a cap.

Check the expiration date before starting work. Do not use a damaged (crumpled) balloon.

Storage

It is necessary to store aerosol contact adhesive in a dark place, at a temperature of 5-30 degrees Celsius above 0. The storage place should be away from children, heating devices and direct sunlight.

Varieties and features

The unique formula of the aerosol adhesive allows the substance to be evenly distributed over the surface. It immediately begins its action and instantly glues materials together. Some species are resistant to high and low temperatures, humidity and chemicals. The sprayability of the glue is achieved due to the dichloroethane substance present in the composition.

According to the time and mechanism of adhesion, it is logical to divide the group of aerosol adhesives into 2 categories:

For temporary bonding of materials. This adhesive is used for textiles and paper, in repairs and decoration. Its advantages are that it leaves no residue and seizes instantly.
In order to obtain a permanent result. This adhesive is ideal for strong and long-lasting bonding of lightweight materials such as plastic, foil, labels, films. The glue lays down in a thin layer and is not noticeable on the surface, dries quickly and lasts a long time.

Aerosol glue firmly connects different types of materials to each other, its consumption is economical, the can is convenient for storage and provides for reuse.

Manufacturer's review, cost

Increasingly, customers are choosing aerosol adhesives. The American company 3M is one of the favorites for the production of such materials. Their products are effective and have many positive qualities.

Scotch-Weld is a reliable line of adhesives for home, industrial use that eliminates the need for a brush, roller and other auxiliary tools. Such a line was specially designed to protect a person during repairs and construction work. After all, banks, brushes and other heaps at a height, in a small area, cause discomfort, increase the likelihood of an unpleasant situation.

The most common spray in the line is 3M 77. It has a strong connection. The price for a 500 ml balloon is 1450 rubles.

Spray adhesives tuskbond in Zelenograd

Krylon low odor spray glue.

Universal spray adhesive PERMATEX All Purpose Spr.

Uhu Glue universal POWER SPRAY pin “3 in.

Universal glue "Presto", aerosol, 400 ml

Adhesives Sprays aerosol Tuskbond

Aerosol adhesive 200 ml

Aerosol adhesive Multi-Spray, 500ml.

Aerosol adhesive for temporary fixing Marabu-Fix it M.

Aerosol adhesive PRESTO universal, 400 ml

Adhesives Sprays aerosol BondSeal

Glue spray 3M Scotch-Weld 77 for fabric, leather, foam rubber.

Aerosol adhesive PRESTO universal, 400 ml

Adhesives, Aerosol Krylon Spray Adhesive glue, 311 g, Krylo.

Universal glue "Presto", aerosol, 400 ml

Glue-aerosol "Abro", universal, 326 g

Aerosol adhesive PRESTO universal, 400 ml

Adhesives Sprays aerosol Tuskbond G500

Adhesives Glue Spray ZM 75 temporary fixing

Glue aerosol professional ABRO

Aerosol adhesive PRESTO universal 400ml

Adhesives Sprays aerosol Tuskbond Tack200

3M Spray Adhesive 77, single component elastomeric aerosol.

Adhesives Sprays aerosol SinTex

Adhesives Sprays aerosol Tuskbond One

Odorless aerosol adhesive KrylonLow Odor Spray Glue.

Adhesive spray 3M Scotch-Weld 75 for temporary fixation, ae.

Uhu Universal adhesive POWER SPRAY contact, aerosol.

Weicon Adhesive Spray, strong hold (500.

Adhesives Aerosol sprays Apollo

Adhesives Sprays aerosol Fentac

Spray glue 3M 7000042447

Adhesives, Adhesive aerosol for light materials Super Quick G.

Prym glue aerosol 250ml bottle 968063

Glue spray aerosol universal S-Tet TRIS 75 ml S.

Aerosol adhesive Multi-Spray (500ml.)

Aerosol adhesive spray 90

Adhesives Sprays aerosol Sterling

Adhesives Sprays aerosol Fentac

Glue aerosol professional ABRO TA-1300 (467g)

Adhesives Sprays aerosol SinTex

Aerosol adhesive spray 75

Aerosol adhesive 3M 77 (500 ml.)

Glue-aerosol "Abro", universal, 326 g

Aerosol adhesive for lightweight materials Krylon super qui.

PRESTO Universal adhesive (aerosol), pack 400ml

Universal adhesive 3M 75 re-glued (7000042447) 0.

Uhu Universal adhesive POWER SPRAY contact, aerosol.

Adhesives, Universal Glue Spray 200 ml, UHU

Presto universal adhesive spray 400 ml

Uhu Universal adhesive POWER SPRAY contact, aerosol.

Adhesives, Glue, odorless aerosol Low Odor, weight 311 g, Kry.

Glue Aerosol "ABRO" universal, aeros.