Terrace and veranda awnings and awnings: elegant home decoration

Advantages of polycarbonate awnings

Polycarbonate is a modern and affordable material. The positive characteristics and advantages of polycarbonate structures include:

• insignificant weight;
• sufficient strength to mechanical stress;
• availability for self-assembly;
• ease of do-it-yourself installation;
• increased indicators of plasticity;
• sufficient heat resistance;
• optimal indicators of translucency;
• sufficient resistance to negative biochemical and chemical influences.

Sheet honeycomb polycarbonate has low thermal conductivity and good rigidity, which makes it possible to obtain a durable and reliable structure of a canopy or canopy. However, the material is not devoid of some disadvantages presented by insecurity to abrasive substances, a tendency to thermal expansion and insufficient UV resistance.

Sheet honeycomb polycarbonate has low thermal conductivity and good rigidity, which makes it possible to obtain a durable and reliable structure of a canopy or canopy

Material for the canopy over the terrace

The canopy over the terrace can be made of a wide variety of materials. Everything will depend on the purpose of the terrace and the owner's financial capabilities. The following materials are used to equip a canopy or roof over the terrace:

• roofing and galvanized iron;
• polycarbonate;
• glass;
• waterproof awning fabric.

Roofing iron is the most affordable and simple option for creating a canopy over the terrace. However, this material has a number of disadvantages:

1. the iron canopy will create a shadow over the terrace. If it adjoins some living room in the house, then natural light will practically not get into this room;
2. over the terrace under the iron roof it will be very noisy during the rain.
3. the iron gets very hot, so it can be stuffy and hot on the terrace.

However, an iron canopy takes place, for example, when building a veranda or "island" terrace, that is, detached from a residential building. In this case, a tree is used, which is covered with iron on top.

Why is polycarbonate so good, and what is it? Polycarbonate is a durable material popularly referred to as plastic. Its physical properties are such that it can be used in construction, for example, for finishing a balcony, veranda or terrace. Polycarbonate terrace canopy has the following advantages:

• transmits natural light, protecting from ultraviolet radiation;
• does not lend itself to rain and snow;
• polycarbonate canopy does not fade in the sun;
• it can be transparent, translucent, colored;
• the canopy can be of any shape, since polycarbonate is a lightweight and flexible material.

Polycarbonate comes in two varieties: monolithic and cellular. The first is a solid plastic, it is heavy and durable, resembling glass in appearance. Cellular polycarbonate is obtained by connecting in a special way two thin sheets of plastic, it is lighter and more flexible, and therefore is more often used for the construction of sheds.

And, another type of awnings are glass awnings. Very expensive, but also durable. Most often, laminated glass is used - triplex. It can withstand heavy loads and is "not afraid" of precipitation. The glass canopy transmits light perfectly and allows you to create an unusual exterior.

Fabric awnings are called awnings. They use a special acrylic fabric that does not fade in the sun and is water-repellent. The color of such a canopy can be any, but most often they use a solid non-transparent material or a material with a strip. Although the color can be any.

Types of awnings in shape and design

In addition to the material, canopies for a veranda or terrace differ in the complexity of the design, as well as in shape. By form there are:

straight canopies with one or two slopes;

arch-shaped canopies made of polycarbonate;

dome-shaped canopies;

canopies of complex shape.

Terrace awnings may differ in the way they are attached. Some of them are attached only to the wall, these are light awning awnings, while others have a frame and supports. The supports and the frame of the canopy are made either from a metal profile and pillars, or from wood. There are also supports made of bricks.

In addition, the awnings above the terrace are mobile. You can distinguish:

• The canopies are static. They are the most reliable, operate all year round and cannot be disassembled.
• Sliding awnings. These awnings allow you to shade the terrace and hide from the rain as needed, in most cases these are fabric awnings. They are convenient and easy to use, perfect for summer cottages.

An economical option for a summer cottage awning

Even the simplest canopy for a summer residence will require calculations and a drawing, which is quite easy to draw up in the Microsoft Visio program for a more or less literate PC user.

The optimal size of such a structure, as practice shows, is 3.2 m (length) x 2.5 m (width). The height will have to be calculated taking into account the growth of the tallest of the family members. And if you focus on the growth of 1.82 m, then at the edges the height of the planned canopy will be 1.9 m, and in the middle - 2.2 m.

To make a strong, reliable frame, you will need 4 supporting vertical racks (50 mm x 100 mm x 2.1 m) - one on each side of the future canopy. They can be made wood by choosing a stronger hardwood material. Based on the height of the rafters, the length of the rafters is calculated and the desired angle at which these rafters should be fastened. For example, if you take boards 130 cm in length, then every two will need to be connected together at an angle of 15 °.

According to the available data, it is necessary to build a drawing.

How to choose?

The choice of awning design depends on the preferences of the buyer, the purpose of use and the budget. It is worth considering that the film will cost less. Although in each case the country of origin matters. For example, a high-quality acrylic canvas with dimensions of 1.5 m will cost about 1000-1200 rubles per running meter. Polyester, say, Korean-made will cost 300-350 rubles, an analogue of an American company will cost 900-1000 rubles.

If you need to close not only the top, but also the side, it makes sense to purchase a folding elbow model made of acrylic textiles. This fabric perfectly traps UV rays, but allows air to pass through. Outwardly, such products look stylish, they have a lot of colors, which will decorate any terrace.

If you want to hide from the prying eyes of the neighbors, you can buy a marquise with a falling shoulder tilt. Buy models in a cassette or a special protective cover.

These products can also be bought for gazebos: however, the choice is subject to the peculiarities of the edges (the length of the awning is subject to a specific slope parameter).

When buying, look at the label "UV filter". This will indicate the fact that the awning has anti-reflective properties. When choosing a large elbow model, it is worth taking care of the presence of additional bearings (to reduce the bending load).

For a pergola structure, you will have to take care of the presence of one or two supports, which contribute to the greater strength of the awning and its protection from strong gusts of wind. The balcony system can be in two or three sections

When choosing such a product, pay attention to the reliability of the longitudinal beam, which is located in the middle of the departure

To make the product last longer, it is worth taking a closer look at the models equipped with a sensor taking into account different wind strengths. In addition, today designs have the ability to adjust different protection in relation to different degrees of intensity of sunlight.

Approach the issue of choosing a product thoroughly. You can't buy the first thing you like: the structure may not fit the terrace or it may not be what you need at all.Carefully study the features of the model you want to buy

It is important that the mechanism system is reliable, durable

Make a purchase at a trusted store. To do this, scroll through the reviews about the model you like, select several options for comparison. Do not hesitate to ask the seller for a quality certificate and accompanying documentation: every serious company provides documents for its range, confirming its compliance with safety standards and international standards.

Complex configurations are more prone to breakage. When choosing a color, give preference to light colors: the textiles of such an awning will not heat up in the same way as products in dark colors of the color palette heat up.

A quality product is always guaranteed. Don't forget this. If the design has it, the seller will emphasize this fact

Pay attention to the density of the material: in fakes, the quality of the fabric is poor. In this case, the structure should be the same over the entire area.

Hillocks, nodules are excluded. The same applies to metal components: there should be no scratches, chips, dents on the brackets. This is the first sign of marriage.

How beautiful to arrange

A covered terrace can become not only functional, but also an attractive object, fitting into the landscape design of the site.

The following are the decoration options.

Plant a variety of vines and flowering crops (grapes, plants of the Bindweed family, ivy, etc.) around the perimeter. With the arrival of the summer season, they will braid the structure, transforming it into a living architectural creation.

Create a painted art object by coloring the building. Here you can show your imagination

Bright colors accentuate the entrance lobby.

Add various carved or forged decorations (for example, fix the support pillars with engraved ones). Such a design can be done by yourself or ordered from a specialist - an exquisite decor will certainly come out from under the skillful hand of the artist

How to make a polycarbonate visor with your own hands

Below is an instruction on how to quickly build a canopy over a porch made of polycarbonate sheets. The structure is a roof on two or four pillars. The entire construction process is conventionally divided into two stages - the erection of the internal supporting structure and the fastening of the roof. The frame of the product can be made of metal, brick, stone or wood.

Required materials and tools

To complete the work, you will need a certain list of tools and accessories:

• metal pipes or corners;
• polycarbonate sheets;
• welding machine;
• grinding machine for cutting;
• drill;
• self-tapping screws and anchor bolts.

Did you know? Before cellular polycarbonate was created, monolithic sheets, invented in 1955, were widely popular. At that time, they were used in military and space technology, made parts for helicopters, airplanes, satellites. Due to its lightness and strength, this material has proven itself in many designs.

Layout and sketch of the canopy

The development of the project begins with the calculation of the main parameters. The length and width are determined so that the minimum amount of trimmings remains "at the exit".

1. The typical width of the polycarbonate sheet is 2.1 m. This geometric value is chosen as a multiple of this value - 4.2 m, 6.3 m or 8.4 m.
2. The length of the sheet is 6 m. The multiple length of the canopy is 2 m, 3 m or 6 m.
3. The height is selected depending on the installation site. But at the same time, it must be at least 180 cm.

When planning the lathing, climatic conditions are taken into account. If you install sheets with a thickness of 8 mm or more, keep a distance of 60–70 cm between the longitudinal beams. In the case of thick layers, take a step of 1 m.

Also check out how to make a gazebo canopy near the house.

Construction process

When creating a polycarbonate visor, it is customary to follow the instructions below.

According to the prepared drawing, parts are cut out for the internal supporting structure

It is important not to forget to label every detail.
In-depth notches are made on the pipes using a grinder ¾ of the diameter and the parts are bent with an arc.
The arcs are combined with crossbars (two - they fasten the arches, and three - are evenly distributed along the length).
Next, two long pipes are fixed by welding.
Vertical consoles are attached with corners to the edge of the wall.
The braces from the free side of the arch are installed to the supporting part of the beam. This technique gives the internal supporting structure the necessary strength and makes it durable.
This is followed by the stage of fastening

Several holes are made in the wall arch for the anchor bolts. The frame is applied to the facade, marks are made for fasteners, along which the wall is then drilled.
The last step is the sheathing with polycarbonate sheets.

How to install?

In most cases, to install a structure, it must be screwed to the wall. Installation implies the presence of a drawing, according to which the installation will be carried out in the future. If the model is finished, it is screwed to the wall using metal corners. If the product is made independently, the procedure is somewhat different.

Let's consider the main steps of work.

• In the drawing, the main marking is performed, the dimensions of the height of the location of the model are indicated, taking into account the upper and lower points, the width of the awning canvas, the parameters of its extension.
• According to measurements, they purchase textiles with the necessary technical characteristics, as well as the necessary fasteners and frame material (aluminum pipes).
• A mechanism for assembling and unfolding the system is selected.

• The assembly is carried out according to the scheme. For this, the material is cut out, the frame is assembled.
• Usually the frame consists of aluminum tubes and two metal corners. To ensure collapsibility, screws and bolts are used.
• Holes are drilled in the wall, then brackets are attached.
• After that, the transformation mechanism is attached to the wall, synchronizing with the frame and canvas.
• The material is pulled over the frame last so as not to tear.

Subject to the assembly rules, the job will take no more than 6 hours. If you do not want to use a metal frame for the construction, buy a wooden counterpart. In fact, its purchase reduces the operational characteristics of the awning: the tree needs constant processing with a special compound, over time it deteriorates from the negative influence of external factors.

See the following video for the awning installation process.

Building a sheathing of a simple canopy

To begin with, you need to fix (dig in and fill with mortar, or you can even muddle up with fragments of brick) in the designated place two main racks - opposite each other. This is done taking into account the level of the slope of the site. Next, right angles are measured from the base pillars with a marking rope, and then the pillars of the right row are reliably buried in, then the left.

Now is the time to arrange the first set of rafters - with screws on one post, then on the other (an assistant is needed here, one cannot cope). The first arch of the "entrance" should be made from the racks and the rafters crowning them. Further - according to the "scheme". But first, the last arch of the "exit" is assembled, and only then - two internal ones, the second and the third.

Options for canopies made of polycarbonate by type of design and shape

Polycarbonate awnings can have a very different appearance, which is determined by the architectural features of the facades and the total area of ​​\ u200b \ u200bthe structure. In their shape, all canopies can be straight, inclined and complex.

Single-pitch form

The frame, triangular in shape, is distinguished by the presence of a characteristic right angle, and one of the legs is fixed on the wall of the structure, after which a monolithic polycarbonate with a low weight is mounted.

Dome shape

The base, made in the form of a semicircle, is fixed with its end parts on the wall of the building. Hemispherical polycarbonate sheet with truncated back. Rigidity is provided with additional lathing.

Dome shape

Arched shape

One of the most popular options, providing for the mandatory installation of reliable additional racks, which allow you to provide a sufficient area of ​​\ u200b \ u200bthe overlap to be performed.

Straight with valance shape

This option is characterized by a slight angle of inclination and a simple frame base that allows you to mount side signs. As a rule, such structures are used on buildings of small area and number of storeys.

Arched shape

Concave shape

The best option in regions with frequent snowfalls. The shape prevents the accumulation of snow mass, and the color of this material and the choice of the frame base are selected depending on the architectural features of the building.

The use of polycarbonate awnings in the courtyard of a private house

Polycarbonate canopies are one of the options for decorating and protecting the structure from wind and precipitation. Depending on the shape and appearance used, such a structure can be attached or free-standing.

Polycarbonate canopy adjacent to the house

This type of polycarbonate canopy is easy to do on your own:

• execution of the upper strapping;
• combining the end parts of the struts with a transverse beam;
• welding a metal frame system or tightening a wooden frame with corners;
• cleaning of welding areas, followed by priming and painting;
• installation of the rafter system with a step of 60 cm;
• lathing with self-tapping screws;
• cutting of sheet roofing material in accordance with the dimensions.

At the final stage, holes are drilled in the polycarbonate sheet, after which the roofing material is fixed with self-tapping screws.

Installing a polycarbonate canopy in the yard

A very popular and popular option, the independent arrangement of which is carried out in stages:

• measuring the parameters of the construction site and performing the calculation of the frame base, taking into account the possible load;
• cleaning of the construction site and marking of places for the location of the racks of the frame base;
• making recesses with a construction drill and installing embedded parts;
• alignment of buildings in a vertical position and pouring with concrete;
• removal along the perimeter of 10-20 cm of the top layer of soil and backfilling of a sand-crushed stone pillow into the resulting pit, followed by tamping;
• installation of formwork, as well as the subsequent implementation of a standard concrete screed with a height of 10 cm with a reinforcing cage;
• fixing on the installed embedded parts of the support posts and connecting them with horizontal beams along the entire perimeter and width;
• installation of arc-shaped trusses and lathing.

Installation of a polycarbonate canopy in the yard begins with a drawing

Polycarbonate canopy over the car

The polycarbonate carport comes in a variety of shapes, including flat and domed looks. When doing the arched, the most popular and very demanded design on your own, it is advisable to adhere to the following construction sequence:

• install a frame base on a site selected for construction;
• cut sheet material equal to the length of the arched canopy with the addition of a margin of 10-15 cm;
• remove the protective film from the front side of the polycarbonate sheets;
• install sheets and secure them with self-tapping screws equipped with special gaskets;
• install the lower part of the connecting profile under the side edge of the sheet and fix it with self-tapping screws.

At the final stage, close the profile with the top cover and cover the open edges of the sheets with end profiles.

Car canopy for a car based on polycarbonate can be of different shapes

Polycarbonate canopy over the patio area

Recreation areas in the form of patios are not only a very original and attractive, but also a very functional element, popular when arranging a local area. The main stages of implementation are similar to the construction of a standard canopy structure.Thanks to such a canopy, it is possible to use the recreation area regardless of weather conditions, including rain, snow, strong and gusty winds, as well as the scorching rays of the sun.

Using a polycarbonate canopy to cover your pool

First, a reliable frame base is built for the polycarbonate canopy. For this purpose, it is advisable to use a galvanized metal profile. The installed support pillars provide stability, so they must be buried to a sufficient depth and concreted.

The standard distance between the posts should not be more than two meters

It is very important to waterproof the supports to protect them from corrosive changes caused by moisture. The finished and cut to size roofing material is laid on the frame base and fixed with thermal washers and self-tapping screws with a step of 30 cm

Using a polycarbonate canopy to cover your pool

Polycarbonate canopy over the veranda or terrace

It is necessary to cut out the roofing material and drill holes even before removing the special protective film. H-shaped profiles are used to connect polycarbonate sheets. It is imperative to leave compression or thermal gaps. End profiles are put on the open edges of the cellular polycarbonate, which it is desirable to fix with glue or small self-tapping screws.

Installation

How to build a wooden terrace with a canopy with your own hands? In most cases, it will need to be screwed to the wall for installation. Installation assumes a drawing. If the model is ready, it must be screwed to the wall with metal corners. If the design is created independently, the actions will be slightly different.

The procedure is performed as follows:

1. In the drawing, the basic marking is created, the dimensions of the height of the model placement are indicated, taking into account the upper and lower points, the width of the awning canvas, and the parameters of its extension.
2. According to measurements, it is necessary to buy textiles, as well as fixation and frame material - aluminum pipes.
3. The assembly is carried out according to the scheme. It is necessary to expand the material, assemble the frame.
4. Usually the frame includes aluminum pipes and 2 metal corners, screws and bolts are used.
5. Holes are made on the wall, and then the brackets are fixed.
6. The transformation mechanism is fixed to the wall.
7. The material is stretched last.

According to reviews, the assembly according to the rules takes no longer than 6 hours. If you don't want to use a metal frame, you can choose a wooden one. But the second option requires constant processing with a special tool, since the material deteriorates from external factors. A high-quality and correctly installed structure can last a long time.

Variety of models

There are several types of awnings. Each of them has its own characteristics, its own scope of use. The choice of a particular model depends primarily on where it will be installed. It is easy to guess that terrace awnings will have a completely different design than, for example, awnings for windows.

Open

Folding awnings of this type are perfect for shading large areas: terraces of private houses, retail space, summer areas of public catering establishments. The main advantages of this design are ease of installation and affordable price. The only thing that needs to be taken into account when planning to install an open type model is that there should be a niche in the wall where it will be possible to hide the folding mechanism from atmospheric influences, or it will be necessary to additionally make a protective visor.

Cassette and semi-cassette

Unlike open awnings, cassette awnings do not need additional shelter, since the main parts of the working mechanism are fully or partially hidden in a special box that protects it from the effects of the atmosphere. Thanks to this, there is no need to worry that the mechanism will jam at the most crucial moment, however, such a design will cost a little more.

Retractable

One of the most common types of awnings are retractable systems. This is a horizontal or inclined structure with one or more folding guides and a roll-up system for folding the web. The main advantage of retractable models is the ability to quickly cover a large area and just as quickly remove the canopy.

When folded, the retractable awning is practically invisible on the wall, it merges with it. It is for this reason that this option is ideal for summer grounds and retail spaces. An additional plus - on the fabric you can place advertisements, information about suppliers and the like.

Dome or basket

The main difference between the dome models is the shape. Outwardly, they look like an inverted basket, but functionally similar to an umbrella, rather, a half of an umbrella attached to the wall. It is because of this that this option is the best awning over the window. The design is lightweight, has a spectacular look, provides maximum protection not only from the sun, but also from the rain.

Showcase

As the name implies, the main purpose of this model is to protect the showcase from direct sunlight. But the scope of its application is not limited to this. The display awning will look great above the entrance to the house or above the open balcony. In most cases, it is inclined, has several stops of adjustable length, which allows you to change the angle of inclination over a wide range.

Other designs

In addition to the main varieties, there are a large number of original models. Vertical awnings are often used in homes. In essence, these are external blinds on rigid frames of a folding structure. Such "curtains" can be set at any angle, providing maximum comfort in the room, and, if necessary, can be easily folded.

For terraces, especially if constant shading is required, horizontal awnings are used. In essence, these are fabric roofs on a rigid frame. Catering establishments often use sectional awnings - a frame made of parallel bars or pipes, on which the fabric is stretched. Fan canopies look original, they do not take up much space, they allow you to close a small area from the sun.

Care

The patio awning to the house requires maintenance to prolong its life. There are several recommendations for the operation of structures.

1. Experts recommend dismantling the structure or packing it in a special case.
2. Maintenance of the structure is required at least 1-2 times a year. This involves changing the lubricant of the withdrawable products, as well as adjusting the parts.
3. You should not allow additional load on the structure: you should not hang objects on the awning. In case of strong gusts of wind, hail, the formation of icicles, the awning must be rolled up in order to protect the system from breakdown.
4. If dismantling is required, it is preferable to invite a master. There are many powerful springs in the design that can cause injury if improperly assembled.
5. Do not use liquid or powder detergents intended for dishes, floors, windows for cleaning. There are special formulations for this.
6. For cleaning, use a sponge, soft cloth or soft brush. If you need to remove large dust particles, you can vacuum.
7. To restore UV protection, which can be erased with every wet cleaning, you need to purchase a special product and spray it.
8. Dry cleaning will help eliminate dust.

According to reviews, the project of a house with a canopy and a terrace is incredibly successful. In this case, the awning must be indicated in the documentation on which the construction is planned. The presence of this detail will make the territory neat.

What is a marquise?

Terrace awnings are awnings that are presented in the form of a solid canvas. They cannot be classified as lightweight fabric awnings, but they are not a stationary structure either. This is something in between. The awning is used to cover some area from the sun, precipitation and other atmospheric influences. All work on its device can be done by hand, without the involvement of specialists.

An original terrace awning.

A canopy of this type has an undoubted advantage - an affordable price when compared with other materials for hinged structures. Of course, the installation of the awning will require the installation of a frame on which the canvas will be held. The frame, as a rule, is made of wood or aluminum pipes, which ensures the lightness of the entire structure. Among the main types of fabrics used for the construction of a canopy, the following varieties can be distinguished:

• Consolidated acrylic sheet. Such a fabric is not a woven material and has an artificial origin, but it imitates it well. Externally, acrylic canvas looks quite attractive. The canvas is sold in rolls of different widths. On the modern market, there are models of a wide range of colors. Acrylic canvas is not subject to temperature extremes and high humidity, it is completely inert to moisture, so the material is a good solution for installing an awning awning in any climatic conditions.
• Polyester. The polyester fabric is also fully synthetic. In addition, during the production process, it is additionally impregnated with special compounds. Most often, they do not make a terrace awning from it, but awnings for cars. With its help, you can provide high-quality protection for any type of coating. The material is not exposed to ultraviolet radiation, moisture, chemical contamination, for many years it does not lose its original appearance;
• PVC fabric. Polyvinyl chloride canvas is the most demanded in the domestic market for creating a canopy. The material is resistant to high temperatures, can withstand serious mechanical stress, so the canvas can not be removed even in winter.

The simplest canopy over the terrace.

At the same time, you can find other woven and non-woven fabrics in stores to create a canopy over the terrace, however, the listed varieties are the most popular and environmentally friendly.

Varieties of marquises

The awning awning is sold in a large assortment. There are two options for awnings, which are divided by type of construction: opening and closing. The simplest structures used for awnings and terraces, as well as summer areas in cafes, are called open. There are other types of products on sale, which we will talk about.

Cassette and semi-cassette

This is a canopy over the terrace, which is equipped with a mechanism responsible for opening the fabric. It can be partially or completely buried. Therefore it is possible

Cassette and semi-cassette. The mechanism responsible for the opening of the fabric in such awnings is partially or completely closed. As a result, they can be used outdoors without worrying that the structure will jam.

The peculiarity of such a retractable canopy is that the material for it is completely protected from dirt and dust, even while not in use. The fact is that the mechanics, which collects matter, winds it into a closed case.

Retractable awnings

Typically, such designs are used in cafes, restaurants and other shopping areas.The popularity of such awnings is that, when opened, they are able to cover a large area, and when closed, the structure is almost invisible. This is what you need for a summer terrace and a terrace that works only in the warm season.

There are various types on sale that differ from each other in color and pattern. Such awnings are especially useful for trade, as advertisements of an institution or a sponsor can be placed on their surface.

Awning of basket or dome type

The name comes from the shape of such a canopy. It looks original, beautiful and gives the terrace charm and nobility. Despite its shape, the structure folds easily. The material from which the hinges are made is both durable metal and a kind of plastic. It is cheaper, but it also does its job well.

Showcase awnings

These awnings allow you to adjust the lighting level. Do not think that awnings are only suitable for retail outlets. They are also relevant on balconies. Their task is not only to protect people from the sun, but also to protect interior details from fading and the influence of precipitation.

The good news is that the fabric that is stretched over the canopy can at any time be replaced with a new one as needed.

Vertical awnings

This is a semblance of external curtains. They are made of high quality breathable fabric. This allows you to ventilate the room by opening a window and leaving the awning lowered. But for terraces, such a canopy will be appropriate. The design allows you to protect vacationers inside from the penetration of insects, strong gusts of wind, rain and prying eyes. True, they are combined with a conventional awning or horizontal awning.

The length of the curtains is independently adjustable. Therefore, if the weather is sunny, then the structure drops to a level that will protect the room, and if it rains, then the canopy can be closed. In general, this type of awning can be called a semblance of Roman blinds or blinds.

Horizontal awnings

This design is best like a standard terrace canopy. The horizontal structure is a roof that fulfills its main functions. The products are quite large, which makes it possible to cover even the largest terraces. To give the structure stability, supports are installed in the front. Indeed, with such dimensions, the structure can be damaged under its own weight and other loads.

If you need to choose awnings for the terrace, then this is an excellent design option.

Pergola or sectional awnings

The peculiarity of the product is that this coating is resistant to wind loads. It's all about strong, stationary columns on which the fabric is mounted. If you connect several different sections to each other, you get an overall canopy used for a terrace.

The marquise has a wonderful appearance. However, such a folding canopy is more difficult to operate, fold and clean than a traditional awning.

Reversible awnings

They are ideal if the terrace or area to be covered is not adjacent to the wall. This is a stand-alone structure. To use it, supports are created, and fabric is already pulled on them. Models are used for the garden, such as a tent or for a sports field.

In this case, the inclination of the two parts of the structure is reverse or gable.

Rolled canopies from rain and sun, they are also awnings, have advantages over conventional canopies. After all, they can be folded at any time for the season. In this case, you need to remember the rules and features of operation.