Brick gazebo with barbecue: projects, photos

Barbecue from a barrel with your own hands

If there is not much space on the site to arrange a gazebo with a barbecue, you can always make a barbecue from a barrel with your own hands. For this we need:

• Metal barrel (preferably food grade);
• Paints and varnishes (soil, paint);
• Brackets and hinges for fastening;
• Chimney pipe.

We will install the barbecue on a special structure. To make it, we need small diameter pipes (up to 50 mm) and boards. In the process, you will need the following tools:

• Drill with a set of drills;
• Angle grinder;
• Measuring tape;
• Set of wrenches;
• Fastening elements (clamps, bolts).

The preparation process is complete and you can start production. Cut a rectangular hole in the side of our barrel, as shown in the photo.

Now we need 6 small diameter pipes. If they are concreted, then we cut them off with a grinder. From 4 pipes we will make the legs of the structure on which the bbq will stand.

Barbecue from a barrel. Photo

The remaining two pipes are used to connect each pair of legs. We use bolts to secure the structure.

They will also fix the position of our barrel. The length of the pipes is adjustable depending on the size of the barrel. The result should be a two-piece structure, each of which will consist of a pair of legs and a connecting pipe.

To connect two parts, you need to take 5 boards 150-200 mm wide. We use four of them to fix the legs (two boards on each side). We fix one board at a height of 5-10 cm from the ground. The second should be just above the middle of the legs.

Using a drill, we drill holes in the boards with a diameter equal to the diameter of the pipes-legs. We set the structure upside down and set the boards on the legs. In our case, bolt clamps were used to fix the boards at the desired level. We turn the structure over and the boards fall into place, preventing the legs of the structure from separating.

We use the last board to connect the upper tier of the boards. This is the final touch to your barbecue base. Now a barbecue from a barrel with your own hands can be installed in its place.

The next stage of work is the arrangement of the barrel. We need a grate for cooking. To fix it inside the structure, we install a pair of brackets on each side using bolts.

Thinking back to that piece of the barrel that we cut out at the very beginning. We will make a lid for a barbecue out of it. Install the hinges and attach it back to the barrel. The grille brackets will prevent the lid from rolling inward when closed.

As a handle for the cover of the structure, you can use anything, for example, a shovel handle.

After installing the lid, wash the barrel thoroughly.

At the end of the barrel we drill holes for ventilation and make a shutter for them.

Then you can fix the chimney and paint the barbecue.

This concludes the step-by-step instructions for building a metal barbecue.

Brick gazebo with barbecue

And if they decided to build a brick gazebo on the site, then it's a sin not to make a brazier there.

Therefore, today, let's talk about brick gazebos with barbecue, and see how to make them yourself.

When thinking about building a gazebo on your site, first of all, you need to proceed from the availability of space for construction.

Having chosen a suitable site and determining the size of the future structure, we begin to select options for gazebos.

Arbor type

Decide what kind of building you want to get the output. A gazebo with barbecue can be made in the summer version, or it can represent a major, winter house.

In the second version, the gazebo is built as a spacious room with windows and a door, completely closed from wind and cold.

And if the summer version is used only in warm weather, then you can gather in a closed gazebo in any weather.

The heat from the barbecue will quickly warm up the room, fill the air with the aromas of the dishes being prepared.

However, the winter option also has disadvantages:

• Higher cost;
• Stuffy in the hot season.

Procedure

After you have decided on the appearance, chose a place and made a building plan, you can proceed directly to construction.

Operating procedure:

1. Marking on the ground. With the help of pegs and nylon twine, a mark is made on the boundaries of the building.
2. At this mark, a trench is being dug under the foundation. The depth and width of the foundation is calculated individually, depending on the load.
3. Simultaneously with digging a trench under the strip foundation, a pit is dug to fill the foundation for the barbecue.
4. Pouring the foundation.
5. Floor arrangement.
6. Grill laying.
7. Erection of walls and columns, electricity supply.
8. Roof installation.
9. Installation of windows, doors.
10. Cosmetic work.

Brick gazebos

As mentioned above, you will have to come up with your own, individual gazebo.

Your project will depend on many factors such as:

• Soil characteristics;
• Availability of free space;
• Material opportunities and many other factors.

However, before reinventing your own "wheel", it is a good idea to look at the inventions of others. Take over the best ideas and implement them in your projects.

Drawings and photos of brick arbors

We present to your attention photos and drawings of brick arbors with barbecue.

Spacious brick gazebo, 5x6 meters in size. A large barbecue oven occupies almost the entire area of ​​the rear wall of the gazebo.

Hexagonal, open, rather spacious brick gazebo with barbecue oven and barbecue.

Brick gazebo stove. Quite expensive, versatile option, which includes a brazier, barbecue, smokehouse.

For the construction of this stove, it is best to hire a specialist stove-maker. If you can make an ordinary grill with your own hands, then such a stove is too complicated for a beginner.

A beautiful and spacious brick summer gazebo with a universal stove.

How do you like the idea of ​​a gazebo with swing benches? Isn't it original?

Brick gazebo with barbecue, video

Look in this video for interesting ideas for gazebos with barbecue made of bricks.

Some more interesting articles:

• Country luxury: how to make a brick tandoor with your own hands and enjoy delicious dishes
• Brick fence reliability and protection
• DIY fence made of corrugated board and brick
• How can you use old brick in the country
• How to properly heat a new brick oven

Beautiful examples of finished buildings

Gazebos can be decorated not only inside, but also outside. Lush curly greenery, flower pots near the porch can be a great decoration.

An extra shelf above the worktable or sink can be used to store spices and cooking utensils.

The main requirement for any gazebo with barbecue is that it should be convenient to cook on it. And so that the cook spends less time and effort on additional movements, it is worth allocating a place for a barbecue and a corner specially for storing firewood.

And so that the chef does not get bored while cooking meat, you can build a bar counter behind him.

Arbors made of brick and wood look practical, aesthetically pleasing and modern. In addition, such buildings are more resistant to temperature extremes and changing seasons, as well as more reliable and durable.

Street lighting outside the gazebo looks impressive. You can choose LED strip or curtain to decorate walls and roofs. And it is good to place street lamps near the gazebo, which are charged with natural sunlight and create a special romantic mood in the dark.

Green spaces around the perimeter of the gazebo look very original and stylish

Thus, they highlight and emphasize the importance of the gazebo.

Brazier

More recently, there were barbecues in which food was cooked only on coals. Today we can select for ourselves both electric and gas counterparts. The product has a simple design - a rectangle made of metal sheets.

Portable or mobile barbecues are supplemented with metal legs or wheels. They can be conveniently placed anywhere in the gazebo.

Stationary barbecues are made of more durable materials, their service life is much longer. They are installed from brick, stone or metal.

The massive structure rests on a solid foundation. Often, a stationary barbecue is supplemented with original forged elements.

Performing work step by step

1. Make a gazebo project and the necessary drawings.
2. Prepare the construction site and level it if necessary.
3. Lay the foundation.
4. Lay the stove.
5. Build walls and columns.
6. Install chimney and roof.

Laying the foundation for a brick gazebo with barbecue

You can also lay the foundation pillar. For this, the pillars are installed at a distance of 2 m from each other at the junction of the walls and at the corners. Then a separate base is needed for the oven. The formwork for this is made of asbestos or a metal pipe. At the stage of laying the foundation, brick pillars are erected. For this, metal pipes are installed in their places of location and, already later, they are lined with bricks.

Laying of walls and columns

Before building walls, you need to waterproof the foundation. To do this, you can lay a layer of roofing material from the ground to the masonry. Further, if special finishing works are not provided, brick laying is performed. It must be done correctly by dressing and suturing. In order for the walls to be even, a building level is required; for greater strength, after 6-7 rows, you need to use a metal mesh, which will be a reinforcing element. Exterior decoration in a brick gazebo is optional, since the brickwork itself has a beautiful appearance.

Grill and barbecue laying

The brick barbecue device in the gazebo consists of walls that protect from the wind, and pipes for removing smoke. It is better to carry out the masonry by shifting each row to one side and the other, alternately by half a brick. Every 2 layers, a metal mesh is used for the strength of the structure. In the last rows, it is better to make small gaps so that air flows there during combustion, since they will serve as a place for frying. To make a brazier with a barbecue grill, you need to build protrusions at the location of the grill, of which there may be several to adjust the height.

It will be convenient and practical to equip the grill with a working area, which will serve as a brick table or a wooden tabletop. A good solution would be to complement it with a sink and cabinets. In such a place, it is convenient to store everything you need at hand: food, dishes, firewood. For the arrangement of the outer walls of the barbecue structure, natural stones are used or plastered.

Roof and chimney

If the chimney pipe is heavy, then it needs support columns. The upper part is covered with heat-resistant steel. If there are problems with laying the pipe, then you can buy ready-made metal. For better smoke extraction, the pipe and chimney are laid out in a circle

It is important not to forget about the visor, it will protect against precipitation.A gazebo with a brick barbecue provides a wide choice of materials for the roof, including tiles, slate, corrugated board, wooden boards

If the gazebos are made of bricks with right angles, then it is more convenient to install a square hipped roof for them. It consists of a ridge knot with 4 diagonal rafters on each side. They are connected in the center with a horizontal crossbar and tied together with slats that are attached to the strapping bar. A popular and reliable option is the six-slope roof shape. The work is performed step by step. The base of the structure consists of 6 beams, which are placed at equal distances from each other. A temporary rack is installed in the center of the roof. It is better to start assembling the main assemblies on the ground, which will speed up the installation time of the roof.

First of all, the Mauelrats are laid, and the beds are already placed on them. The construction of the frame ends with a scaffold. Roof beams from opposite corners are lifted and connected in the ridge. After that, the rest of the rafters are attached to the node. It remains only to mount the rafters and rafter legs, and install the structure on the roof of the facility. For all types of roofing, you need to choose the correct angle of inclination and length of the plumb lines so that rain does not fall inside the building. A brick gazebo with a barbecue for a summer residence, made by hand, will become the pride of the owner and will advantageously decorate the territory of the site.

Step-by-step construction of a gazebo with barbecue

If you decide to build a gazebo with barbecue, then try to adhere to step-by-step technology. First of all, clear the area of ​​debris and unnecessary items and make a foundation. After that, you can proceed with the installation of smaller parts (chimney, frame, floor, roof). At the end, the gazebo is decorated.

Site preparation and foundation

Site preparation consists in removing weeds and debris. After that, proceed to the foundation. If you decide to make a brick gazebo, then give preference to a tape or tiled look.

The step-by-step technology of work is as follows:

1. Dig a pit 1 m deep.
2. Pour crushed stone inside, in a layer of 15 cm.
3. Flatten and tamp.
4. Lay on top of the waterproofing.
5. Lay the reinforcement and make a mortar of crushed stone, sand and concrete (in a ratio of 5: 3: 1).
6. Pour the prepared mixture into the pit.
7. Install metal pipes in the places where the pillars will stand.
8. Leave everything on for a week to freeze the mixture.
9. Make a barbecue base using concrete.

Layout of bricks for barbecue

For masonry, you can use regular and facing bricks. To make the gazebo more personal, it is better to use materials of different sizes and shades when creating patterns. The optimum laying height is 1 m. To bond the bricks, use a regular cement mortar. To make the structure warmer, lay the masonry in 2 layers. Do not forget to leave a place where the doors will be installed.

Chimney installation

The use of a chimney has a number of advantages. Thanks to it, the risk of carbon monoxide accumulation and smoke pollution is reduced, which can cause serious harm to health. When choosing a chimney, give preference to large and vertical structures.

Did you know? On the Canary island of Lanzarote, the mouth of a volcano is used as a barbecue. Meat and other products are fried on it.

Installation technology is as follows:

1. Pour a concrete foundation with a height of about 10 cm.
2. Lay out a layer of waterproofing using roofing felt.
3. Install the base to support the brazier.
4. Cover the outer part with a brick, and insert a box made of metal sheets inside.
5. Make a shutter at the bottom, and a protective umbrella at the top. This will prevent the penetration of precipitation.

Installation of the gazebo frame

Carrying out the installation of the frame consists of several stages:

1. Dig holes 80 cm deep around the edges of the site.
2. Install profile pipes made of wood or metal and fill them with concrete.
3. Weld the veins of dense materials to the posts in 2 rows. The first of them should be located at a height of 2 cm, and the second - 90-120 cm.

Floor laying

It is best to make a floor of tiles in gazebos. This will help keep weeds from growing.

The step-by-step algorithm of actions is as follows:

1. Prepare a sand base.
2. Fill in a compound suitable for tiling.
3. Wait for the material to cure.
4. Lay non-slippery tiles to prevent accidents.

Roof and roof

You can design a roof in a gazebo by adhering to the following steps:

1. Mount the metal ridge by attaching struts and vertical supports to it.
2. Attach the diagonal rafters that will form the ramps.
3. Secure the center rafters.
4. Install a waterproofing layer.
5. Install the roof covering.

The roof is considered an integral part of the gazebo. Its main purpose is protection from adverse weather conditions. For the roof, inexpensive and simple materials are used: corrugated board and metal tiles.

Decorating and decorating

There are several finishes available. The summer resident can independently decide which one to use.

The most common are:

• carrying out puttying with further painting with facade paint (if necessary, you can combine different shades to make the structure more exclusive);
• covering the gazebo with decorative tiles imitating natural stone;
• decorating walls with clapboard or other edged materials.

Flower pots can be used as decor, and various colorful pillows and blankets can be used to create a homely atmosphere. Carry out the decoration based on your own preferences and the style of the entire site.

Making a gazebo with a barbecue yourself is not difficult if you follow all the recommendations. If necessary, you can use ready-made drawings of structures and be inspired by the available options on the Internet. Try to use only high quality materials so that the structure will last for many years.

Review of materials

The choice of material for the construction of a gazebo with a stove depends on the aesthetic preferences of the land owners and their financial capabilities.

The most common material for a garden building with a stove is wood. Such a building looks the most organically against the background of any landscape. From a financial point of view, using a tree is more profitable. In addition, for many owners of suburban real estate, it is not difficult to independently build a gazebo out of it.

A good option for a building with a stove is to use bricks. But it must be borne in mind that such an impressive gazebo will not look quite appropriate on a site with a minimum area. But such a structure, if it is correctly built, will be able to serve for a very, very long time, without requiring special care.

If the owners need a gazebo that will be used only on hot summer days, it is good to take metal for construction. It can even be a forged structure with openwork railings and iron posts supporting the canopy. Such a structure will look very attractive. At the same time, it will not take much time to erect it, and the building will not catch fire during operation, especially if the interior has a minimum of elements that can flare up.

Also, during construction, you can combine various materials - the frame is made of metal, the outside can be trimmed with decorative stone or timber, and from the inside with clapboard.Shingles can be used as roofing material.