How to choose?
In order for the repairs made to please you for many years, it is important to choose the right materials suitable for specific work. There is no doubt about the quality of Sika products
But if you make a mistake with the choice and use the material not quite for its intended purpose, then the result will differ from what was expected.
Adhesive selection
High-quality construction glue should not only be strong, but also safe. Especially if it is used for laying parquet and other work with wooden surfaces. The fact is that wood is a very capricious material, and bad glue can simply ruin it.
Waterproofing
You should be equally attentive to the choice of waterproofing materials. It all depends on the conditions under which the surface insulation will be carried out. For example, in the bathroom, it makes sense to use a plaster mixture. It is she who is able to protect materials from water. After waterproofing, even when moisture enters, they are not deformed.
Coated waterproofing is also popular. It is very economical. Even a small amount is enough to protect most of the surface from moisture. This option is suitable if the amount of work to be done is much larger than the budget.
For sealing joints and other minor repairs, special profiles made of high-quality polyurethane are suitable. Waterproof tape can also be used. It must be strong and free from any defects.
For waterproofing sewers or large water supply systems, it is worth using a special dry mixture. The assortment of this brand includes many one-component cement-based mixtures.
Where are they used?
Sika materials are used by both professionals and those who are engaged in home repairs on their own.
Building materials are used at almost every stage of work. So, for example, when gluing wallpaper or laying parquet, glue from this company will come in handy.
Materials from the Sika brand can be used in earlier stages of construction. Additives and all kinds of mixtures strengthen the solutions and make them more durable. For example, substances added to concrete extend its life.
Products used for waterproofing are also ubiquitous. They can be used to protect a house or apartment from the outside. Also, with the help of the company's products, it is possible to waterproof balconies, bathrooms and showers.
Peculiarities
Sika is a company founded over a century ago in Switzerland. This country has always been famous for quality goods, including building materials. Today the company pays a lot of attention to the development of new materials. The company is also expanding its sales area by distributing its products outside the country. Today, there are outlets with the products of this manufacturer in 86 countries. We have sold brand products since 2003.
Moreover, the materials are durable. The need for new repairs will not arise for several decades. The manufacturer claims that its materials can last up to fifty years, which is a long time when compared with the life of competitors' products.
Polyurethane adhesive for parquet and plywood from Sika
Advantages:
- fast hardening (on average 12-24 hours);
- environmental friendliness, odorless;
- polyurethane adhesive for parquet and plywood does not contain water, will not lead to warping of the wooden covering;
- high elasticity, will redistribute tension between the base and the parquet;
- the ability to lay directly on the screed, without using plywood;
- excellent adhesion to the substrate;
- wide range of working and operating temperatures;
- high level of soundproofing properties;
- workability and ease of use (holds glue rolls well, does not spread);
- the possibility of gluing the coating without a tongue / groove connection (for example, Lam-parquet).
Recommendations
Another useful recommendation is that you should always estimate the scope of work in advance. This will allow you to purchase the required amount of materials. This means that you do not have to stop work to buy additional products or, conversely, think about where to put the surplus.
This applies to all work, including floor screed, waterproofing, wallpapering and parquet installation.
Also, when purchasing, you should always pay attention to the quality of goods. The packaging must not be opened or deformed, as well as its contents.
This is a guarantee that the products are not damaged.
In detail about how to properly make waterproofing in the bathroom, the following video will tell you.
Parquet repair adhesive
The repair compound is intended for local fixing of piece dies that have come off the base, screed or damaged during operation. As a polyurethane repair adhesive, we recommend using SikaBond-52 Parquet polyurethane parquet adhesive or SikaBond-T2 universal assembly adhesive. As a rule, during the restoration of the coating, the damaged elements are carefully removed, the base (screed) is cleaned and leveled, an adhesive is applied, new dies are placed on it, carefully selected in color and size. For a more durable fixation of wooden elements, a load is placed on top. Finishing work consists of sanding and then applying a protective decorative coating such as varnish or oil.
Product types
Sika now manufactures a variety of products. These are additives for solutions, and protective compounds, and products for insulation, and glue with sealants. Therefore, the brand's products are bought by both individuals and large companies.
Waterproofing
Perhaps the most famous are precisely the waterproofing materials from this company.
- Injection-451 is an injection waterproofing material suitable for working in rooms with high humidity.
- For the treatment of tanks and pipes, the 101 A lining waterproofing is also suitable.
- Igolflex N waterproofing coating, in turn, is excellent for working with concrete.
Glue
The company also produces various types of construction adhesives. The formulations work effectively on a variety of surfaces. Among the adhesives presented by this brand, MonoTop 910, Titan SOLO are especially popular.
Primers and mixes
High-quality primers and primers should be noted separately.
- Sika Primer-MB, Sikaflex Pro Construction.
- Primer 206G + P is suitable for working with plastics.
ViscoCrete 225 is a dry mortar or hyperplasticizer.
Like Mix Plus or Sikament BV-3M, it is used to create quality mortars.
Also pay attention to the MonoTop-723 and 612 products.
Even cleaners can be found among the products. For example, Aktivator-205 is a quality mortar used before attaching seals.
