Which wall panels for interior decoration are best: plastic pvc, decorative mdf or flexible in the form of a brick on a self-adhesive base

Care rules

Decorative wall panels for interior work allow you to quickly and without additional difficulties arrange the wall surface of a living room in an attractive way. But if the homeowner wants to maximize the life of an interior with such a design, the walls will need to be up-to-date. It must be carried out according to certain rules:

• removal of dust and dirt from the surface of PVC boards with imitation of brick aesthetics should be carried out exclusively with a damp cloth of soft texture slightly moistened with soapy water;
• it is strictly forbidden to use aggressive cleaning agents, especially in the form of a powder, in relation to such a finish. Such products can leave scratches on the surface or cause the stove to lose its original color;
• if one panel is damaged, it can be easily dismantled and replaced with a new one. However, this must be done carefully, without haste.

MDF in the interior

The brick will look appropriate in a variety of interiors. The decoration is typical for rural areas and for some classic ones.

For example, these can be styles:

• Gothic;
• loft;
• country;
• romanticism.

Not so long ago, the building materials market could only offer wallpaper with a brick pattern, but they did not bring the necessary realism into the interior. Today the assortment has been expanded, materials are able to imitate texture and texture.

As for the designers, they thought over the possibilities of decorating with such brickwork to the smallest detail.

• Brickwork will be appropriate if there are more than two rooms in the living room. This is due to the fact that, despite the fact that the interior will be cozy and resemble an old castle, it will be inconvenient to be constantly in such a space. A modern resident is not used to such designs, so pressure will be exerted on him and the impression of a lack of comfort is created.
• In order not to overload the interior, it is better to cover with panels on one specific wall. This solution is also suitable for one-room apartments, but it is advisable to choose a softer shade. Avoid aggressive design.

• If you need to decorate only a specific part of the wall, you can use bricks with bright colors. This will highlight a specific area. But you should not decorate the fireplace with this material, since the presence of an open fire can lead to a fire.
• It is not recommended to use red brick in living space, it is better to use it in restaurants or clubs. At home, this color will eliminate the calm and emotional atmosphere.
• If you want a calm, unrestrained atmosphere, white or light gray brick is the best choice. This design can fit into a pastel interior. However, you should take into account the possible "chill", so it is advisable to dilute such an environment with something.

Main areas of application

Brick imitation decorative panels are used in the interior decoration of many buildings. The material is used to decorate residential premises and corridors of private houses and apartments. The decorative product is often used for cladding kitchens and loggias. Waterproof material is an excellent solution for finishing bathrooms, showers and toilets.

The brick pattern coating is widely used in the design of shops, shopping malls, hotels, cafes, restaurants and other public places.In this case, "brick" panels are used to decorate bar counters, walls, columns and arched structures.

Light versions of products can be used to decorate all walls in the room. Bright and dark options should be used for one wall, and for the rest of the surfaces it is necessary to choose a light coating, which can be represented by other finishing materials: wallpaper, paint, plaster or tiles.

A large amount of brick pattern can visually overload the interior. Designers recommend using panels that imitate brickwork as accents. In the kitchen, you can decorate an apron with a cover. In bedrooms, the original decoration is usually done above the head of the bed. In the living room, it is used to accentuate the central wall. Also, the material can be used for cladding a fireplace, plasma TV, large paintings or doorways.

Installation nuances

PVC boards are easy to install, but if you want to create the perfect decorative wall, do not forget about the key rules of the technological process.

Before proceeding with the installation of panels, preparatory work should be carried out:

1. the walls are cleaned of traces of previous finishing;
2. remove all pollution;
3. close up cracks and repair damaged areas;
4. if the surface is severely deformed, it must be leveled.

There are two ways to mount these products:

• gluing;
• fixing to the crate.

In the first case, high-quality adhesives designed to work with PVC are used. When choosing an adhesive, it is worth considering its purpose, composition and thickness of the slabs.

It is customary to use glue when laying on flat surfaces. The lathing is installed in cases where the walls are too deformed, and there is no way to align them. There is a second reason - the presence of the lathing makes the cladding more durable and protects it from the appearance of dents and deflections.

Advantages and disadvantages of products

Brick walls are often found in styles such as loft and high-tech. Since these areas have gained great popularity in recent years, not only natural products, but also materials imitating brickwork have become in high demand in the construction market.

Wall panels deserve special attention, since they have a number of advantages not only over other types of imitation brick, but also over the brick cladding itself.

The main advantages of panels for interior wall decoration:

• Environmental friendliness. Almost all wall panels are made from natural raw materials, and during the production process no harmful components are added to them.
• Moisture resistance. The products are highly resistant to moisture absorption, so mold and mildew do not form on them. They can even be used in bathrooms and kitchens.
• A high degree of decorativeness. Coverings that imitate brickwork look realistic even with a smooth surface. Textured models sometimes cannot be distinguished from real material, if you do not get closer to them.
• Variety in design. With a variety of panel options, you can always find the right solution for a particular interior. Products can be of different shades, textures and masonry patterns.
• Easy maintenance. Wall panels are easy to maintain. Since they are not afraid of chemical attack, they can be cleaned with detergents.
• Easy assembly and disassembly. The finishing materials are lightweight, so they can be easily and quickly mounted on the wall in different ways. In addition, if one of the panels is damaged, the required area can be restored without problems with a new product.
• Affordable price. Panels imitating brick will cost much less than real material.

With wall coverings, you can improve the sound and heat insulation of the room. If there are minor cracks and bumps on the wall surfaces, they will easily disappear under the panels.

Like all materials, brick imitation panels have certain disadvantages. First, they are susceptible to mechanical damage. For this reason, they must not be installed in high traffic areas. Secondly, the coating is subject to high temperatures. Make sure that there are no open flames nearby. But these disadvantages do not prevent people from purchasing high-quality material, which, if properly used, will decorate the walls for a long time.

Installation of plastic panels for brick

Plastic boards are mainly glued directly to the surface of the walls. At the same time, minor irregularities do not affect the result of the work. The material has sufficient elasticity, which allows deviations when pasting the surface.

The significant curvature of the walls allows the panels to be installed using a frame.

Decorative wall boards are not strong enough to withstand the effects of mechanical stress, and plywood sheet provides them with some protection.

1. Preparation for the installation of PVC boards begins with the installation of the frame.

   Plates are attached to the frame

2. Required materials and tools:
   • plumb line or thread;
   • slats for a frame made of metal or wood;
   • puncher;
   • start and finish profiles;
   • metal staples;
   • special stapler;
   • screws, dowels.
3. After preparing all the necessary, proceed to the horizontal installation of the rails.
4. The installation process starts from the top rail. After its installation, using a plumb line, the place of attachment of the lower rail is determined. At the end, the middle slats are mounted. The frame is ready.
5. With the help of a stapler, a starting profile is attached to the rails. PVC boards are sequentially installed on the wall.
6. When the penultimate plate remains, attach the finishing profile.
7. The last plate, after adjustment, is inserted into place without fastening.

Mounting

PVC panels for brick are installed on a prepared frame, it does not matter what kind of relief they have. The appearance of the facing work done will depend on how correctly the frame has been installed. This is what is most difficult in the installation of PVC panels, since the geometric correctness of the plane depends on this method of fastening.

Instrument preparation

In order to perform high-quality installation of PVC panels, you need to purchase the following materials and tools:

• metal or wooden slats, which can be purchased at any hardware store, but they can be supplied with the panels;
• simple thread or plumb line, which are required to check the vertical;
• puncher, dowels and screws for installation.

Please note that in order to make a frame made of wood, it is necessary to pre-process the material with an antiseptic, because this will increase its service life

Installing the frame

PVC panels must be in the same plane. First you need to make the markup, which must be done as accurately as possible.

This can be done as follows:

you need to attach the thread to the wall, which will allow you to immediately determine the deviations of the plane;
to the resulting size, it is necessary to add the thickness of the insulation, and this must be done in a small plus

Please note that when you fix the insulation, make sure it is intact, since deformation will lead to the loss of its basic properties. You will need to leave a gap of 1 cm;
strapping is carried out over the entire plane, where fastenings are made using dowels or anchors.
it is necessary to attach intermediate strips

In this case, it is required to be based on the width of the insulation, while it is not recommended to mount them at a distance of more than one meter from each other.
After installing the frame, you can proceed with the fastening of the waterproofing. The film must be overlapped.

Fastening

At the very beginning, you need to install the top bar.Using a thread, you need to determine the place where the lower rail will be located. Next, you need to fix the intermediate strips. Now you can start attaching panels decorated with a brick.

Further, plates can be installed on the frame. This work should be approached extremely responsibly. It is necessary to ensure that all elements are installed exactly.

This work will require a variety of materials.

• starting and finishing profiles attached to the strips, panels will be installed on them in the future;
• building level, thanks to which you can control how evenly the slabs are installed;
• construction stapler, with which you can fix all materials.

• It is necessary to fix the starting profile with a stapler. If self-tapping screws are used for this, then they must be installed in specially prepared holes.
• If the panels are used for external surface cladding, then the connection does not need to be made closely, but it is better to leave a few millimeters of a gap. This will avoid moisture expansion problems.
• With the help of a stapler, you need to attach panel by panel to the wall. This action must be continued until one plate remains. Having installed the penultimate plate, it is required to install the finishing profile. The last panel is cut to the required size and inserted into the structure.
• The last panel does not need any fasteners, as it is held in place by the finishing profile. At this step, the paneling work is complete.

In the video below you will see the installation of PVC panels for brick.

Brick finish options

Brickwork is typical of the English classical and rural style. Also used in country, gothic, romanesque, loft and some others. Imitation brickwork can be combined with many interior materials such as metal, wood, wallpaper, various paints and plasters.

When finishing all walls rooms pseudo-brick panels interior will create the atmosphere of an ancient castle, but such an environment will emotionally put pressure on the people in the room. It is better to cover one wall with slabs. This will not overload the interior of a small room, provided that the tones are non-aggressive and the colors are soft shades.

It is important to organically fit the brickwork into the interior.

Bright brick can be used only for a small fragment of the walls in order to focus on a certain area. Light, gray-white shades of brick slabs will organically fit into the interior, made in pastel colors, create a feeling of coolness and free space

Varieties of decorative wall materials for interior decoration "like a brick"

The construction markets offer a wide range of cladding fittings of rack, sheet and plate types.

The basis of MDF boards (fine-dispersed fraction) is compressed pulverized wood chips with a binder - lignin. They belong to the category of environmentally friendly products. They have good indicators of strength and rigidity. Suitable for cladding rooms with medium humidity. At high humidity, MDF sheathing with a laminated top layer is used.

Plastic PVC bricks

The material made of polyvinyl chloride polymer is an elastic, lightweight plastic with a small thickness. This cladding is not afraid of moisture, which makes it possible to install it in the kitchen and in the bathroom. Suitable for both interior and exterior decoration.

Despite its fireproof qualities, keep the building material away from fire in order to avoid deformation. Due to its low strength, PVC board is subject to mechanical stress. The accessories are cut with a clerical knife and regular scissors. The advantage of such cladding is the low price.

Fiberglass concrete

This type of finishing material is made from cement and glass fibers. He is not afraid of chips and abrasion. But the cost of this facing solution cannot be called low.

Self-adhesive base

There are cladding boards with a self-adhesive backing. To install them, you do not need to stock up on self-tapping screws or liquid nails, it is enough to separate the back from the film and attach to the surface. Before installation, clean the wall from dirt and only then glue the sheet.

Features and requirements

The cladding material used for the interior decoration of the premises must meet the following requirements:

• it must be characterized by high strength, but be flexible and resilient;
• the basis of these finishing materials should be exclusively environmentally friendly raw materials;
• PVC panels must be resistant to temperature changes;
• have resistance to high humidity;
• meet existing fire safety standards;
• decorative elements should be installed quickly and easily;
• it is recommended that the material is resistant to detergents.

With the help of the presented PVC panels, you can solve many problems. This facing material allows you to mask existing damage and defects in the wall.

The advantages of this material are not limited to the ability to solve many technical problems. The panels in question are capable of creating a unique, aesthetic surface appearance. The light and white version is the most popular today. Many users choose small bricks, as well as vinyl models that have an aged look. This imitation of the "old" interior has positive reviews.

Varieties

Panels with a brick texture are of several types.

They are classified depending on what material is at their base, so it is worth highlighting:

• PVC panels are a durable material that includes polyvinyl chloride and the addition of special seals;
• MDF boards, where wood chips are the main raw material.

Both materials under consideration are easy to use and install. With their help, you can create unique interiors. Panels with a brick texture are combined with almost any finishing materials. They perfectly hide irregularities and existing defects on the walls. With their help, you can create various decorative elements. They can be installed not only on the walls, but also on the ceiling, but this option is quite rare.

Views

MDF panels can boast of their main advantage - a pleasant cost, but that's not all. The positive qualities include a large selection of shades, relief structures, and various forms. This is what makes this material so popular. As for such brick-like panels, it should be noted right away that their installation is very simple. In addition, this material can be used for decoration almost everywhere, since it weighs a little. All these qualities make it possible to expand the area of ​​use.

The product itself can be made of various materials, therefore they are divided into two types.

1. PVC. They include polyvinyl chloride, which is referred to as artificial materials. Initially, the material gets only white and only then it is painted.
2. Panels made for brick. Such material immediately differs in its appearance, in addition, it has increased reliability and durability. Panels of this type are made using wood chips and high pressure. It is due to the fact that the material is influenced by pressure and temperature, it acquires excellent technical qualities.

As a result, in the production process, panels with a rectangular shape and an area of ​​3-8 m2 are obtained.At the end, the resulting plates are cut with a jigsaw or a hacksaw and in this form are delivered to stores.

The panel is a good solution, since as a decoration it is able to hide uneven walls, and, if necessary, hide prominent communications and decorate niches.

How to choose the right option

Panels imitating brick walls are available in a wide range. When choosing a coating, one should take into account the room in which they will be installed. For each type of room, finishing products must have certain properties.

The following guidelines will help you find the right panels:

• Small rooms should be finished with tiles that are fixed in a horizontal position. For this, rack and pinion models are suitable, which visually expand the space.
• In order not to look for a suitable design for a long time, you can choose panels for white brick, which looks harmonious in almost any design.
• Create a unique geometric pattern using square tiles with a brick pattern.
• Renovating spacious rooms will not take long if you use sheet panels that can capture a large wall space.
• It is recommended to use bright colors of a brick pattern only for an accent wall. Otherwise, rooms should be decorated with a neutral color finish.

With correctly selected decorative products, you can create a beautiful and effective lining of the room.

Before buying material, you should pay attention to the manufacturer. Experts advise to purchase certified products of well-known and proven brands in order to get a high-quality finishing result.

You should also take the time to read the instructions, which provide recommendations for the installation and operation of the panels. Fixing elements are purchased in accordance with a specific type of product.

Scope of use of decorative wall panels

The name already speaks for itself. It is a cladding material for wall decoration. And thanks to the characteristics of the panels, they also serve as a protective layer. In this case, products can not only sheathe a room inside, but also outside. The scope of use is as follows:

• apartments;
• private houses;
• offices;
• entertainment establishments;
• shopping malls.

This is a universal solution, and thanks to the presence of a specific pattern (in this case, imitation of a brick), it is possible to create a specific design style. Therefore, designers use similar decorative panels for the following interiors:

• loft;
• hi-tech;
• country;
• provence;
• fusion.

Products look beautiful in the interior and it can be difficult to recognize a fake brick wall if you look too closely at the decoration.

Views

The most common types of brick panels for interior cladding include two options - plastic (PVC) and MDF. These are materials that are completely different in properties, each of which has both advantages and disadvantages.

MDF

The material is made from wood dust obtained by crushing sawdust.

The strength of the panels is increased by pressing. The structure of the material is a cross between plywood and cardboard, which makes it easy to cut with a regular hacksaw.

MDF

The advantages of MDF products include:

• environmental friendliness. The basis of the panels is, albeit recycled, but still natural wood material. Therefore, it is completely safe for health;
• MDF contains formaldehyde, however, if the manufacturing technology is observed, its percentage is small, due to which the substance does not affect the human body in any way;
• simple and quick installation that does not require special skills and the presence of special tools;
• thermal insulation properties. Of course, this material cannot be called a heater, but it still creates an additional heat-insulating layer, even if it is minimal;
• higher strength compared to plastic counterparts. MDF panels, although not too resistant to mechanical stress, are still superior in this regard to PVC products;
• light weight and reasonable price.

Disadvantages:

• exposure to moisture. Products are not suitable for bathroom decoration;
• lack of fire-resistant qualities. MDF sheets, like wood products, are combustible material;
• low impact resistance.

Pvc

The material is made from a powder mixture obtained by grinding rock salt and petroleum products, which is converted into a polymer.

Pvc

They can be of very different colors: white, yellow, red and others. Plastic panels for brick are also, in turn, divided into several types:

leafy. They are made in the form of sheets of different sizes and are well suited for finishing large areas;

Leafy

tiled. Are square or rectangular elements;

Tiled

rack and pinion. Produced in the form of slats of different lengths and widths.

The advantages of the products include the following features:

• moisture resistance. The panels are perfect for finishing rooms with high humidity;
• unpretentious care. The surface of such a cladding is easy to clean;
• long service life;
• resistance to ultraviolet radiation;
• light weight, ease of handling during installation and simple installation;
• affordable price.

Disadvantages:

• weak mechanical strength. It is easy to leave dents and scratches on the surface of the material;
• specific smell. New products do not exude the most pleasant aroma. However, it quickly disappears with intensive ventilation.

On sale you can also find other types of panels for ordinary or one-and-a-half bricks.

These can be materials made from:

Chipboard;

Chipboard

hardboard;

Hardboard

gypsum;

Gypsum

plywood.

Plywood

For more information about decorative brick panels for interior decoration, see the video:

MDF panels

MDF boards can be installed in the bathroom and kitchen

Decorative MDF boards are produced by pressing shavings. Synthetic resins and a small amount of formaldehyde are used as a binder.

Wall panels made of MDF are moisture resistant and can be used in rooms exposed to constant moisture (kitchen and bathroom). Installation of slabs is done in a frame way, it is uncomplicated and takes a minimum of time.

The panels have a number of advantages:

• strength;
• hygiene;
• ease of care;
• environmental friendliness;
• practicality;
• the ability to hang cabinets and shelves;
• low price.

Imitation brick allows you to significantly save on repairs

The building materials market is flooded with products of different quality and price categories. The imitation is often so well done that it is difficult to immediately distinguish it from the original. If natural materials go beyond income, you can safely find an affordable substitute for excellent quality and decorative properties.

Pros and cons of plastic slabs

Benefits of using plastic panels:

1. Decorative plastic plates are very easy to attach, so their installation and repair can be done by hand. Thanks to the large area of ​​slabs (from 3 to 8 square meters), the work will be completed promptly. Cutting can be done with a hacksaw for metal.
2. The panels have a long service life that exceeds 10 years. They fit well on any base, without requiring the cost of its preparation. They are lightweight, which makes them easier to work with.
3. Cladding panels are easy to clean. They do not require any restoration measures (eg painting or plastering). They just need to be periodically cleaned of dirt with a soapy sponge.
4. PVC wall panels are versatile, suitable for exterior and interior wall decoration, even used for the ceiling.
5. With the correct installation of the slabs, you can improve the thermal insulation and sound insulation of the walls of the house, as well as protect it from moisture penetration.

Decorative plastic slabs will last more than 10 years

Disadvantages of using panels:

1. The material from which the decorative wall panels are made is non-flammable, but easily deformed from exposure to high temperatures. Therefore, products should be protected from fire and mounted away from stoves and fireplaces.
2. Imitation brickwork, made of PVC, has a low mechanical strength, making dents and scratches inevitable.

Varieties of wall panels

Panels for interior decoration are:

1. Typesetting. Quite a popular variety with excellent technical and decorative characteristics, it allows you to quickly complete the work. Such a board has a thickness of 6 to 25 mm and a length of up to 4 m. The width varies from 15 to 30 cm, which allows for cladding of varying complexity. Fastening is carried out by means of a lock connection. The coating can be double-sided, which provides protective functions.
2. Leafy. They have a fairly large format, this allows you to perform work in a short time or to cover large areas. Can be used as an apron in the kitchen. Such material must be fastened end-to-end with an exact fit of the edges or a connecting strip must be used.
3. In the form of a tile. These finishing products have small dimensions: 300 * 300 mm, 150 * 600 mm, 980 * 980 mm. The fixation is done by the docking method, although some options are equipped with a lock connection. Great for living room and bedroom walls as it allows for interesting combinations.

Wood fiber cladding is quite simple to install, but it is better for a novice master to give preference to elements with a lock connection, most often these are type-setting panels

The outer coating is most often presented in two modifications: laminated and laminated. The second option has a one-sided cladding, so it is less reliable.

A veneered version is also made to order, but such a refined fiberboard must initially have a high density. For this, a smooth material is used on both sides, since it is more stable.

Moisture-resistant fiberboard panels are great for installation in the kitchen, for example, in the area of ​​the apron, but it is undesirable to install them in the bathroom

Flexible brick wall panels: installation in stages

Decorative plates are attached:

1. liquid nails and all-purpose glue;
2. self-tapping screws, screws and dowels on a wooden or metal frame.

If the first method is relevant with a perfectly smooth and even surface of the walls, then the second, on the contrary, is suitable for flaws, chips and damage.

Before fastening, it is advisable to remove the panels from the packaging and leave them for adaptation in the room for a day. This will prevent deformation after installation.

• screwdriver;
• puncher;
• self-tapping screws / nails / construction stapler / glue;
• slats for lathing.

Initially, you need to create a wireframe. To do this, you need to connect the wooden planks on the wall surface so that the guides are perpendicular to the panels.

The distance between the planks should not exceed 40-50 cm.

Next, you should process the resulting frame with a special protective agent.
The panels are attached to the crate with glue, nails, self-tapping screws, and a construction stapler.
PVC sheets are also installed using a special mounting profile. In this case, the panels are placed as close to each other as possible, fixed on the profile with construction clips.

The empty space between the wall and the pseudo-brick can be filled with sound insulation, waterproofing and thermal insulation (foam or foam), and also used for laying communications.