Glue "super moment": instructions and characteristics

Super-glue gel "Contact"

"Contact"

Super-glue gel "Contact" KM 432-318 GL, has a rather dense jelly-like consistency, it does not flow and is absolutely transparent. One-component "Contact" is designed for reliable connection of materials such as:

• rubber (but not silicone),
• hard wood and other porous materials,
• leather,
• PVC plastic,
• metal,
• porcelain.

Not suitable for ABC plastics, PPs and PE and Teflon.

"Contact" KM 432-318 GL

The second "Contact" KM 432-318 GL has the following properties:

• high seam strength,
• gluing speed up to 30 seconds,
• dries quickly
• ten second correction possibility,
• can be used as a material for filling small cracks and gaps,
• withstands from -50 to +80 degrees.

The instructions for use are simple and do not differ in any way from the conditions of use of the "Moment" super glue, except that it is applied to one of the glued surfaces. You can remove glue on your skin with soapy water and greasy cream.

Species diversity and characteristics

A universal glue called Moment can cope with almost any material. At the same time, the resulting seam is characterized by cleanliness and high wear resistance. This provides the substance with immense popularity among consumers.

The category of contact adhesives "Moment" includes a wide range of types of adhesives for gluing products made of wood, metal, natural or eco-leather, as well as other materials.

The domestic market for building materials, as well as related products, offers a wide selection of products from this category. Namely:

• universal adhesive "Moment 1" is suitable for a wide range of materials;
• glue "Moment Crystal" is a colorless polyurethane adhesive;
• Moment Marathon is mainly used in the footwear industry;
• "Moment Gel" or glue-gel: has a gel structure;
• "Moment Rubber" is intended for gluing all types of hard and foamed rubber;
• Moment 88 is particularly durable.

All these types of formulations in tubes of 30 ml and 125 ml, according to the manufacturer's instructions, are intended for connecting different kinds of materials and give a person the opportunity to make a truly reliable and durable connection.

Security measures

Moment Gel is a toxic substance that can harm human health. To minimize the negative effects of such an adhesive, all work must be carried out in a well-ventilated area. Providing ventilation will facilitate the removal of toxic substances, as a result of which the likelihood of poisoning from harmful fumes will be reduced. If this rule is neglected, the master may experience headaches, dizziness, and nausea.

To remove the remnants of dried glue from the treated surfaces or from the tool, it is recommended to use substances for thinning paints and varnishes. Fresh drops of waterproof glue can be easily removed with a cloth soaked in gasoline. The composition that has got on the clothes can only be removed by dry cleaning.

Areas of use

Contact adhesive is used in cases where you need to quickly repair damaged items. Its substance is ideally combined with various types of plastic materials. It also glues porcelain, glass, ceramic, wood, metal, rubber surfaces.

It helps to splicate textiles, cardboard and paper canvases.The considered type of instant glue "Moment" is incompatible with polyethylene and polypropylene. Also, the composition is prohibited from glueing pieces of broken dishes intended for cooking and storing food.

Positive aspects and features of the composition

The advantages of the produced glue are represented by the crystallization of the hardening seam, which improves the adhesion to the processed surface. With prolonged exposure to non-aggressive alkalis and acids, the maintenance properties of the applied composition are observed. Transparent universal glue "Moment Gel Crystal" resists the negative effects of negative temperatures and can be stored unhindered for up to two years.

The appearance of this possibility is generated by the temperature of the room, which varies from twenty degrees below zero to thirty degrees Celsius. If the heated air contains a small percentage of moisture, crystallization reactions are accelerated. Cold slows down the evaporation of solvents, prolonging the polymerisation period of the substance. The curing material forms a durable transparent film layer. It blocks the path of moisture trying to seep into the structure of the repaired product.

The time for complete hardening of the film coating reaches a maximum of three days, and the repaired product is allowed to be used one day after fixing the parts. The restoration of the original consistency and operational properties of the frozen mixture takes place at room temperature. The relatively high coefficient of bond strength stipulated by the manufacturer allows the repaired item to be immediately subjected to further processing operations.

It has mostly only positive reviews and a detailed description on the package. Available in containers of 30 ml and 125 ml.

User ratings for the Power tool

Consider the most informative reviews without unnecessary distractions. It turned out like this:

The woman treated the white spot of glue on her husband's trousers, which had “lived” there for two years, with the product. Literally 10 seconds after treatment, I cleaned and washed the cloth with soap. No trace left!
Anticlea is relatively liquid and completely transparent

It is necessary to work carefully, as it is easy to "overdo it" with it. There is practically no smell of the cleaner

Tried cleaning the glue stains on the table, trying to remove the dirt after one, then seven, then ten hours. In all three cases, the anti-glue damaged the lacquer finish of the table and took ten hours to completely clean.

The conclusion is still the same: if the user has carefully read the instructions for using the product and followed its instructions, the anti-glue will not let you down! First, it is necessary to check the reaction of the treated surface to the cleaner in a place inaccessible to view.

Universal "Super glue-gel": glues everything in a second

Universal second Super-glue has long become a favorite material for use in everyday life, in production, for repairing leather goods and creativity. Numerous tests have led to the fact that the manufacturers have developed an optimal composition, which includes:

Seconds Gel Moment

• rubber resin,
• formaldehyde resins,
• rosin ester compounds,
• acetone,
• various hydrocarbons.

Depending on the manufacturer and brand, the composition of Super glue may vary, but in any case it remains a completely synthetic substance, which must be handled extremely carefully and not be given to small children.

The instructions for Super Glue Gel highlight the following general technical characteristics:

• suitable for any materials (exceptions are found individually for each brand),
• waterproof,
• storage conditions in original packaging with 3 g packaging: from -20 to +30 degrees for 24 months,
• does not lose technical qualities after defrosting.

Varieties of Moment adhesives

The Moment line of polyurethane adhesives is produced by Henkel.According to user reviews, the demand for this series is the highest among analogues. The following types of contact adhesives of the series are on sale:

1. "Moment # 1 Classic" (Universal). The adhesive is inexpensive and suitable for most known materials. Differs in a high level of adhesion, density, fast drying.
2. "Moment Gel". This tool has a gel structure, is a kind of superglue, is produced not only in tubes, but also in cans.
3. "Moment Crystal". Absolutely transparent composition based on polyurethane, used in everyday life, repair, construction.
4. "Moment Marathon". Most often purchased for shoe repair, it is widely used by craftsmen. Very resistant to environmental factors.
5. "Moment 88 Extra Strong". This tool guarantees the highest adhesion strength, is not afraid of water, frost.
6. "A moment of 60 seconds." Fast drying one-component adhesive. Convenient for use on vertical bases.

Usage

The area of ​​application of the Super-Moment glue is quite large. It is capable of gluing rubber, metal, wood, fabric, paper, leather goods and more. But glue is not able to glue everything together. It is not suitable for gluing polyethylene, polypropylene, stacks, dishes that will undergo thermal reactions. It is also unsuitable for bonding very soft leather.

When using Super-Moment glue, you should adhere to the following instructions:

• the surface on which the glue will be applied must be dry and clean;
• for good adhesion, the surface must be degreased with gasoline or acetone;
• after application, it is immediately necessary to firmly press the parts together;
• a small emphasis can be made on the humidity of the air - the higher the humidity, the faster the setting will take place, and vice versa;
• accumulations of air should be avoided, which can adversely affect the future of bonding, because this will damage the structure of the dried glue, so the strength parameter will be much lower.

When using Super-Moment glue, you must adhere to the following safety rules:

• the bonding process must be carried out in a well-ventilated place, because a large accumulation of vapors released by this product can negatively affect the body;
• it is imperative to do the work with gloves and glasses;
• keep glue out of the reach of children;
• do not allow the product to come into contact with the skin and eyes;
• it is imperative to dispose of the product at the end of the expiration date.

Very often, when using Super-Moment glue, fingers stick together. If you adhere to safety rules, then you can avoid this trouble.

If this happens, then it is worth using one of the methods described below.

• If some time has passed after gluing the fingers, then they should be placed under hot water or lowered into a container in which soda with hot water should be diluted. Subsequently, the glue will soften and you can easily separate your fingers.
• You can use a drug called Super-Moment Antikley. He is able not only to wash the fingers from the glue, but also helps to clean the surface from excess. Before use, be sure to read the instructions and test it. If the glue gets on the clothes, it is almost impossible to wash it off, but the "Super-Moment Antique" will allow you to return it to its original appearance.

Classification

Superglue is classified by its content of substances:

• Without additional elements in the composition - one-component. Such an adhesive mass is applicable for quick gluing of various planes. After two hours, the product can be used.
• With fillers - two-component. Thanks to the additives, the glue receives electrical and heat-conducting properties.

By consistency, superglue can be:

• Liquid. This consistency is able to penetrate into the smallest gap (0.05 mm).
• Average.They have a wide area of ​​use due to their versatility.
• Viscous (gelatinous). Can fill minor voids.

Useful Tips

Recommendations for use:

• before starting work, the treated surface, if necessary, clean and dry;
• the result of gluing can be stronger if the material is degreased with acetone or gasoline;
• when using the upper end of the cap for the first time, you need to pierce the protective metal film in the tube, at the end of the work, close it tightly by twisting the cap;
• glue is applied to only one surface with a thin strip, then the two sides should be pressed tightly against each other and wait a few seconds;
• the fixing time is influenced by the air humidity in the room, the higher it is, the faster the setting speed will be;
• the process of gluing parts should start from the center to its edges in order to avoid air getting inside, after which the edges are pressed tightly.

To safely use and store glue, you must follow simple basic rules:

• gluing should be carried out in a well-ventilated place;
• do not inhale glue vapors;
• wear glasses and gloves if possible;
• avoid contact with eyes and skin;
• keep away from children and direct sunlight;
• do not use after the expiration date.

Scope of use

Secondary glue "Gel Moment" is used where there is a need for gluing or minor repairs of damaged products. Such a composition has found its application in various workshops, the construction industry, and everyday life. The glue is able to "tightly" adhere products made of cork wood, plexiglass or foam rubber.

It is suitable for almost all types of materials. However, there are some limitations. It cannot be used for bonding polyethylene, propylene, teflon. Also, the composition is not recommended for the restoration of broken dishes in contact with food.

Instructions for the correct work with the material

Bonding can be carried out at home, the work does not provide for special skills.

The main thing is to perform actions quickly and accurately, since there is no time for adjustment.

Super glue instructions:

• The plane is thoroughly cleaned of dust, dirt, degreased (acetone, alcohol).
• A special part of the cap pierces the protection on the tube.
• Apply glue in a thin layer, quickly press the planes.

Compress from the center of the seam to the edges.

• planes are compressed for up to 30 seconds;
• wait until it dries completely.

After gluing, if there is still a liquid mass, the spout of the tube is carefully wiped off and closed tightly.

If the superglue in the tube begins to crystallize, then it will not be possible to dilute it.

Work must be carried out in IZ facilities, in a well-ventilated room. Do not work with cotton gloves, as contact with the glue will leave a burn on your fingers.

If superglue gets on areas that are not intended for bonding, then it will be problematic to wipe them off. First, it is necessary to carry out mechanical processing, remove the remains with acetone or special means.

We recommend a video on the topic:

Guidelines for the use of anti-glue "Strength"

The Sila brand has thought of us and offers superglue and its remover in one package. The manufacturer claims that using the Sila anti-glue, you can remove both the hardened and the liquid substance of the second glue. It is indicated that traces of all contact adhesives based on polyurethane and PVA can be removed.

This product can be used to remove marker and ink marks and adhesive labels. It can be used to clean the skin on the hands, as well as the surfaces of most smooth materials. Moreover, the agent can be used for preliminary cleaning and degreasing of the bonded surfaces. The following application scheme is recommended:

• test the reaction of the material to be cleaned to the agent used in an inconspicuous place and make sure that the anti-glue does not dissolve its surface;
• treat the remaining adhesive over the entire surface of the stain with the agent;
• put a napkin folded several times on top;
• when processing fabric, use napkins on both sides; leave the place of cleaning in this state for up to 12 hours;
• remove and destroy wipes; wipe, rinse with water and dry the treatment site;
• repeat the operation if necessary.

When treating leather, it is recommended to apply the product to the remaining adhesive, hold for a few minutes, and then gradually remove the hardened adhesive from the surface of the skin. You should not rush so as not to damage the skin. Wash your hands with soap and water immediately after cleaning the adhesive.

Precautionary measures

The glue is flammable, therefore, when working with it, the following safety measures should be observed:

• do not open the package near any sources of fire;
• do not apply glue to products located near sources of elevated temperature;
• do not handle heated surfaces with glue.

All actions with the "Moment" are carried out only in a ventilated room (hoods or through ventilation are used). When working for a long time, even in the presence of forced ventilation, you must wear a respirator! Work should be done in overalls and gloves. If glue gets on your hands, other open areas of the skin should be immediately washed with plenty of water and soap.

Precautionary measures

Transparent glue "Moment Gel" cannot do any special harm to the skin of the hands. But working with this tool, as with any other chemical, of course, is best with gloves. It is not worth repairing products using this glue, of course, in a cramped, stuffy, unventilated room. This can lead to unpleasant symptoms such as dizziness and nausea.

The tube with "Moment Gel" itself should be closed as tightly as possible after use. Otherwise, the remnants of the glue will quickly crystallize and it will become impossible to use them later. Store this product in a cool, dark place, where children cannot reach it. Also, according to fire safety regulations, this gel must be kept away from open flames. The material "Moment" of this type is combustible.

Precautionary measures

Due to the presence of toxic components, experts recommend applying the adhesive in a very carefully ventilated or ventilated room. Fulfillment of this condition reduces the likelihood of poisoning the body by vapors accumulating in space.

If the master ignores such precautions, when inhaling the evaporated ingredients, he has bouts of hallucinations, dizziness, vomiting, and nausea.

The contact of the material on the skin of the hands is prevented by putting on special gloves. Eyes must be covered with special glasses. In the absence of the listed means of protection, hands and eyes stained with glue are thoroughly washed with water.

In between uses, the tube, can or canister with the substance should be tightly sealed. This will prevent crystallization, which will cause irreversible disappearance of the properties of the adhesive.

A moment will easily fix everything that is in your home. Special adhesive for plastic. An illustrative example of work.

• Experience of use: once
• Price: 66.90 with a discount of 60.70 rubles

Good day!

Recently, the plastic fastening of the refrigerator shelf broke. I decided that it was not a problem, and everything could be fixed by the famous transparent yellow universal glue Moment, which, I think, almost everyone has at home.

Special Moment Plastic

But here's the bad luck: my glue dried up, so when I was in one large supermarket in our city, I went to the economic and construction department in order to purchase a universal Moment, but, noticing a special glue for plastic, I bought it. Henkel glue special Moment Plastic

Place of purchase: Spar hypermarket, but I think it is in all hardware and building stores.

Brand: concern Henkel, Moment. The famous glue with which you can fix everything.

Country of origin: Russia.

Volume: 30 ml. I did not find information on the Internet, whether it is produced in other volumes.

Expiration date: 24 months.

Henkel glue special Moment Plastic

Composition:

What type of material is suitable for:

That is, it is plastic labeled 3, 6 and 7 (other types of plastic, which include polyurethane). There is no marking on the shelves of the refrigerator, but in appearance it is polystyrene (6-ka).

Unlike its classic counterpart, the color is transparent, not transparent yellow. The smell is pronounced, acetone, it is felt only in the bottle, but the operating time and after it is not felt.

Henkel glue special Moment Plastic

APPLICATION.

Acted according to the instructions on the package:

Instruction. Moment Plastic.

First, I processed the surfaces: I wiped the glued areas with ethyl alcohol to clean them.

After waiting for the alcohol to dry, I applied glue with a thick layer to the broken off piece, distributed it evenly over the entire area with a toothpick. Henkel glue special Moment Plastic

White when shaded. Henkel glue special Moment Plastic

It was not easy to do this: the glue began to thicken right before our eyes. I didn’t put anything on the second half. I waited for about 12-13 minutes, after which, with a sharp movement, with force, I applied the broken off plastic to the refrigerator shelf. I removed the residues from the side with a toothpick. But all the same, it did not work out very neatly: the glue hardened quickly, and it was not possible to remove some of the remnants. After all the manipulations, I left the shelf to dry. When dry, the glue turns white, it is not noticeable on my mount, but I suppose it will be visible on colored and black surfaces. Moment Plastic

Glue Moment Plastic The next day I installed a shelf in the refrigerator and put several cans on it. In the photo, this is the topmost shelf. Top shelf repaired with glue.

Result. It turned out not too neat, but this is the problem of my crooked hands. The shelf had already been broken a few years ago from the other end and repaired with the Universal Moment.

Left - Moment plastic after drying, right - Moment universal (for several years)

The moment is universal. It has been holding for several years. For comparison, the photo of the second edge. Let's see how long the Moment of Plastic will last, the shelf has been standing for a week, if in the next few months the newly repaired edge falls off, I will add a review.

Consumption. Tube after single use. Enough for another 5-6 such fixes at least.

Henkel glue special Moment Plastic

I recommend Moment Plastic special glue for repairing broken plastic items. A worthy little brother of the universal Moment.

Dignity

• quickly grasps
• reliable
• inexpensive
• lasting
• glues with a bang

disadvantages

sticks to fingers

Manufacturers

Superglue is produced by domestic and foreign manufacturers.

Famous brands:

• Super glue contact primer. The package contains the main composition and the primer. The tool is intended for joining materials with dissimilar planes. The primer increases the degree of adhesion, the bulk is applied after it is completely dry.
• Superglue 505. Universal compound with extra strong properties. The product is transparent, suitable for gluing all materials, except for polyethylene, Teflon. The negative side is the stiffness of the seam, which will not withstand the stress of fracture.Glue marked 502 is produced from the series, which stands out for its heat resistance.
• Moment. Differs in versatility, water resistance, heat resistance. Bonds quickly and reliably. Suitable for bonding all types of surfaces, except PTFE, glass, polyethylene. The utensils glued with it should not be used for direct contact with food.
• Second. Super-instant bonding agent for different surfaces. It is produced in a transparent liquid or gel form. The liquid composition bonds in 3 seconds, helium in 10 seconds. The tube weighs 3 grams and is equipped with a “smart cap” for convenient use.
• Wurth Klebfix. It is used for the repair and installation of products. The design is convenient for use: the function of opening, closing, there is a special system that excludes the spilling of mass. Has increased adhesion.