Sealant "TechnoNICOL" No. 45: technical characteristics, consumption per 1 m, gray butyl rubber composition weighing 16 kg

Peculiarities

The sealant is a gelatinous mass, which is a plastic and thick composition. Before you start using this mixture, gently and thoroughly mix it slowly. The color of these products can be white or gray. After hardening, the white sealant can be painted with facade paints and varnishes of any shade, but before painting, a small test must be carried out on an inconspicuous, separate part of the sealant. Here is a list of the main technical characteristics of TechnoNICOL No. 45:

one cubic meter of sealant weighs from 800 to 1100 kilograms;
the hardened sealant can be operated in the temperature range of -50 ... + 80 degrees;
tensile strength - 0.2 MPa;
the volume of non-volatile, dry matter is about 50 percent;
elongation at break is 100 percent;
the indicator of adhesion strength relative to concrete - 0.2 MPa;
drying time to touch - 60 minutes.

Many are interested in what is the flow rate per square meter? Consumption can be different, it completely depends on what kind of sealing work is being done. For example, filling a joint 5 mm deep and 10 mm wide would require 45 grams of sealant per meter. And in order to close a seam, the width of which is 60 mm, the depth is 20 mm, it is necessary to spend about 1 kg of the composition for each running meter.

If the sealant will be used in the off-season or in winter, when the temperature drops below +5 degrees, it must be soaked before use in a room with room temperature for at least 24 hours. It is strictly forbidden to apply sealant if it is raining or snowing outside, as well as if moisture is likely to penetrate the area to be sealed. The sealant is supplied in metal buckets of 16 kg and 8 kg; it can be purchased at almost any hardware store.

Characteristics of TechnoNICOL sealant No. 45

Poor sealing of external joints is the main cause of dampness, floor swelling and wallpaper peeling. It is quite simple to fix such a problem with the help of a sealing compound. The best qualities are possessed by rubber-based mixtures.

Composition

Sealant "TechnoNIKOL" No. 45 can be safely attributed to the market leaders.

A mixture based on butyl rubber with fillers, targeted additives and an organic solvent. Butyl rubber is a polymer with a complex molecular structure. Due to this, it is highly resistant to various types of influences. He is not afraid of acids, alkalis and salts. It is insoluble in ethyl alcohol and acetone. Low gas permeability.

The mass itself is homogeneous, viscoelastic and mobile. The color of the mixture can be gray or white. The latter allows painting with facade paints. Test color and adhesion on an inconspicuous area before painting.

Properties

Butyl rubber sealant must perform the functions assigned to it with high quality due to its properties:

elasticity;
does not require additional preparations for use;
deformation and strength indicators are at a fairly high level;
high level of adhesion to various surfaces;
operating temperature from -20 to +40 degrees Celsius;

resistance to aggressive environment and precipitation;
does not require special skills and tools for installation;
subsequent staining is possible.

Specifications:

the weight of one cubic meter of the composition is 800-1100 kg;
able to withstand pressure up to two atmospheres;
when trying to break the frozen composition, it is lengthened twice;
the dry matter content relative to the total mass is more than 50 percent;
the strength of the bond with concrete is two atmospheres;

consumption per 1 sq. m from 0.5 to 1 kg of sealant;
after application it can withstand temperatures from -50 to +80 degrees Celsius;
one hour for tack-free drying.

For all its advantages, TechnoNICOL # 45 sealant also has a disadvantage. It is for outdoor use only.

Purchase

You can purchase butyl rubber sealant at your hardware store. In production, it is poured into 8 and 16 kg metal eurobeds.

Shelf life is 18 months

Be sure to pay attention to it. A mixture with an approaching and expired shelf life has the worst quality characteristics

The price varies depending on the color and weight. So, for one kilogram of a white solution, you will need to pay around 195 rubles, and for a gray one already 189. For a sixteen-kilogram bucket, you will need to pay 3111 and 3036 rubles, respectively.

Store containers with sealant in a dry room with good ventilation and protection from sunlight.

Application

As mentioned earlier, the sealant has an extremely high degree of adhesion to a variety of surfaces.

building blocks;
wood.

Therefore, the range of its application is wide enough.

Sealing

concrete seams;
reinforced concrete seams;
metal constructions;

window and doorways;
balcony blocks;
residential and public buildings.

Waterproofing

concrete;
reinforced concrete;
metal.

There are several types of applying TechnoNICOL No. 45 sealant to the surface:

the entire surface is treated with the composition;
the sealant is applied to the corners and the central part of the thermoplate on the side that will be attached to the surface;

strips from 4 cm wide, there should be more than four of them per square meter;
drops are also applied with a spatula, 50-80 g each, with a frequency of 10 per square meter.

The application method depends on the material of the surface, as well as on which method of applying the sealant is more convenient for you.

Application tips from professionals

it is recommended to mix the composition before starting work;
dust and moisture can impair the adhesion of the sealant to the surface, so the surface must be cleaned and dried;
if the work is planned to be carried out at subzero temperatures, then the sealant should be kept in a warm room for at least a day;

the composition should be applied with a rubber or metal spatula;
clothes, exposed skin, eyes should be protected from the mixture, be sure to use gloves;
adding a solvent to the sealant for easier application will negatively affect its properties;

watch out for the formation of gaps and voids during operation, they will negatively affect operation;
always adhere to the manufacturer's recommended standards as described on the label.

Unlike analogues, this sealant can be used at low temperatures and high humidity.

More details about the properties of the sealant are described in the video.

Features and characteristics of the sealant

Butyl sealant is understood as a one-component thermoplastic mass based on synthetic rubber (polyisobutylene), therefore the material is often referred to as "butyl rubber sealant". Among other things, compositions of this type contain hydrocarbons, oxygen and sulfur compounds, substances based on nitrogen, various metals.

The rubber in the composition of sealants has strength, high adhesion properties to aluminum, glass, sheet steel (adhesion rates - not less than 90-93%). Due to its special qualities, it can easily penetrate into seams, joints, cracks, reliably clog them and protect them from moisture, dust, dirt.

In appearance, sealants are a plastic gelatinous mass, rather thick in consistency. They can be white, gray or black, and light shades can be tinted with any facade paint or dry pigments before use. Funds are sold in tubes, buckets, cans, barrels, have certificates of conformity indicating the composition and technical characteristics. Sealants are applied using extruders - special machines, where they are heated to + 110-150 degrees, softened and supplied under pressure. Some modern formulations can be applied cold.

Sealants "TechnoNICOL" No. 45: characteristics, consumption and application

Modern butyl rubber sealants are often used in construction works of all sizes to join building structures. In everyday life, their scope is work with plumbing, thermal insulation of terraces, greenhouses. The main ingredient in such mixtures is synthetic rubber based on isobutylene. It has a complex molecular structure and is waterproof and airtight. Other components of the sealant are organic solvent, filler and targeted additives.

Butyl rubber sealant belongs to the group of cold curing materials. Such mixtures do an excellent job with their tasks due to their special properties: sealants are elastic, they do not need to be heated before use, they have good deformation and strength characteristics, they can be used in a wide temperature range. It is worth recalling, however, that these formulations are not intended for indoor use. One of the most popular products is TechnoNICOL sealant No. 45.

Peculiarities

It should be noted that the TekhnoNIKOL corporation, known in the building materials market since 1992, has a research center, whose developments are being actively implemented at their own enterprises. Sealant "TechnoNICOL" No. 45 - a mixture for qualified, professional use. It has all the advantages of butyl rubber compounds, is UV resistant, dries up in about an hour. Recommended for use in all climatic regions. Previously produced "Hermabutil-S" can be considered an analogue of this product. The composition is indispensable where sealing and waterproofing of building structures is needed, while the building material can be almost any.

If we talk about sealing, then these are connections (seams, joints) of buildings made of reinforced concrete, concrete, metal, external walls, adjacent balcony slabs, window and balcony blocks. With the help of a sealant, buildings made of concrete, reinforced concrete are waterproofed. The composition is used for external corrosion protection of sheet steel buildings, modular wooden buildings, ceramic slabs, glass.

Description of the composition

The sealant looks like a thick, plastic, jelly-like mass. The mixture is thoroughly and gently mixed before use. The color of the mass is gray or white. The white sealant can then be painted with any color of façade paint, but before the main painting, a test should be carried out on a separate, inconspicuous area.

Technical characteristics of the TechnoNICOL sealing compound No. 45:

a cubic meter of substance weighs about 800-1100 kg;
operating temperature range is from -50 to +80 degrees Celsius;
conditional tensile strength is 0.2 MPa;
elongation at break - 100%;
dry matter content - 50%;
adhesion strength to concrete - 0.2 MPa;
dries to touch in 1 hour.

Per connection 1 wide cm and a depth of 5 mm it will take about 45 grams per running meter, and for sealing a seam 6 cm wide and 2 cm deep, the consumption of the composition per running meter will be about 1 kg.

<?php related_posts(); ?>

When construction work is carried out in the off-season or in winter (at temperatures below +5), the composition must be kept in a warm room for at least a day before use.During atmospheric precipitation (snow, rain), it is forbidden to use a sealant if there is a possibility of moisture penetration into the sealed areas. A sealing compound is sold in hardware stores in metal buckets. The weight of the Euroveder is different: there are options for 8 and 16 kg.

Precautionary measures

Simple safety guidelines can help you keep your sealant safe. It should be remembered that the composition cannot be used inside residential premises and near an open flame. During contact with the sealing compound, it is recommended to protect the respiratory tract by using PPE.

Apply the sealant carefully and avoid contact with the skin and eyes. Subject to the storage rules, the warranty period of the sealant is one and a half years.

Requirements - dry, dark place, temperature from -20 to +30 degrees Celsius.

The properties of TechnoNICOL No. 45 sealant are described in the following video.

Application tips from professionals

it is recommended to mix the composition before starting work;
dust and moisture can impair the adhesion of the sealant to the surface, so the surface must be cleaned and dried;
if the work is planned to be carried out at subzero temperatures, then the sealant should be kept in a warm room for at least a day;

the composition should be applied with a rubber or metal spatula;
clothes, exposed skin, eyes should be protected from the mixture, be sure to use gloves;
adding a solvent to the sealant for easier application will negatively affect its properties;

watch out for the formation of gaps and voids during operation, they will negatively affect operation;
always adhere to the manufacturer's recommended standards as described on the label.

Unlike analogues, this sealant can be used at low temperatures and high humidity.

More details about the properties of the sealant are described in the video.

Peculiarities

TECHNONICOL butyl rubber sealant No. 45 (white) 16kg

1 package = 16 kg. Designed for sealing external surfaces, seams and joints of building structures of residential, public, industrial buildings and structures. Available in white and gray.

Peculiarities:

High adhesion to all building materials.
Convenience and safety at work.
High resistance to weathering.
It can be painted with all kinds of facade paints.
Product for professional use.

Application area:

sealing joints and seams of concrete, reinforced concrete and metal building structures, external walls, adjoining balcony slabs;
sealing of window and balcony blocks of buildings and structures, both industrial and residential construction;
waterproofing of concrete and reinforced concrete structures, for external corrosion protection of sheet steel structures, prefabricated structures made of wood, ceramic tiles, glass of industrial and residential buildings and structures;
protects the surface and filler of the joint from moisture penetration, destruction and cracking of the interpanel joint (cement screed), and also prevents the penetration of moisture into the interior of the room, increases the durability of building structures.

Structure:

The sealant is a homogeneous visco-elastic movable mass based on butyl rubber containing fillers, targeted additives and an organic solvent. After hardening, TechnoNIKOL # 45 butyl rubber sealant turns into an elastic, water-tight mass with increased resistance to atmospheric influences (solar radiation, ozone, temperature extremes).

Material specifications:

Working stock density, kg / m3

Conditional strength at the moment of rupture, MPa, not less

Adhesion strength to concrete MPa, not less

Elongation at the moment of rupture,% not less

Mass fraction of dry residue,%

Drying time to "tack", no more, min.

Operating temperature range, ° С

Manufacturing jobs:

Stir thoroughly before using TechnoNIKOL No. 45 butyl rubber sealant. Apply with a spatula on a prepared surface at an ambient temperature of -20 ° C to + 40 ° C. At negative temperatures, the Sealant should be kept at room temperature for at least a day before use.

Sealant consumption depends on the type of work being performed. Store in a dry, heated, protected from sunlight place at temperatures from +5 to + 30 ° C. The guaranteed shelf life is 12 months.

Security measures:

Avoid contact with skin and eyes. Do not use indoors. Do not use near open flames.

Packing: Metal sealed buckets 16 kg.

Butyl rubber sealant belongs to the category of one-component sealants. It is a mixture of butyl rubber and organic solvents: it contains targeted additives, depending on the manufacturer, due to the evaporation of which the sealant sets. Mainly used for outdoor use.

Peculiarities:

High adhesion to all building materials.
Convenience and safety at work.
High resistance to weathering.
It can be painted with all kinds of facade paints.
Product for professional use.

Application area:

Structure:

Material specifications:

Sealants "TechnoNICOL" No. 45: technical characteristics, consumption and application

Nowadays, butyl rubber sealants are used everywhere during construction, finishing and repair work of various nature. These products are used often enough to connect various building structures.In domestic conditions, TechnoNIKOL sealant No. 45 is used to seal greenhouses, heat insulation of street buildings, verandas, terraces, as well as to seal the water supply system. The main component of butyl rubber sealants is synthetic rubber, which is made from isobutylene. This component has a complex molecular composition and is impermeable to water and air. The sealant also contains specialized targeted additives, fillers and organic solvents.

Butyl rubber sealant products are cold curing material. These compositions perfectly cope with the task of sealing, since they have sufficient elasticity, they do not need to be heated before use, they have low deformation and excellent strength characteristics. The scope of application of TechnoNICOL sealant No. 45 includes a wide temperature range

It is important to remember that butyl rubber sealants should not be used indoors. Sealing compound "TechnoNICOL" No 45 is very popular today, further we will consider its characteristics, properties, consumption and safety measures when working with it.

Application

As mentioned earlier, the sealant has an extremely high degree of adhesion to a variety of surfaces.

concrete;
metals;
polymeric materials;
glass;

building blocks;
wood.

Therefore, the range of its application is wide enough.

Sealing

concrete seams;
reinforced concrete seams;
metal constructions;

window and doorways;
balcony blocks;
residential and public buildings.

Waterproofing

concrete;
reinforced concrete;
metal.

There are several types of applying TechnoNICOL No. 45 sealant to the surface:

the entire surface is treated with the composition;
the sealant is applied to the corners and the central part of the thermoplate on the side that will be attached to the surface;

strips from 4 cm wide, there should be more than four of them per square meter;
drops are also applied with a spatula, 50-80 g each, with a frequency of 10 per square meter.

The application method depends on the material of the surface, as well as on which method of applying the sealant is more convenient for you.

Description of the composition

Technical characteristics of the TechnoNICOL sealing compound No. 45:

a cubic meter of substance weighs about 800-1100 kg;
operating temperature range is from -50 to +80 degrees Celsius;
conditional tensile strength is 0.2 MPa;
elongation at break - 100%;
dry matter content - 50%;
adhesion strength to concrete - 0.2 MPa;
dries to touch in 1 hour.

A joint 1 cm wide and 5 mm deep will take about 45 grams per linear meter, and for sealing a joint 6 cm wide and 2 cm deep, the composition consumption per running meter will be about 1 kg.

When construction work is carried out in the off-season or in winter (at temperatures below +5), the composition must be kept in a warm room for at least a day before use. During atmospheric precipitation (snow, rain), it is forbidden to use a sealant if there is a possibility of moisture penetration into the sealed areas. A sealing compound is sold in hardware stores in metal buckets. The weight of the Euroveder is different: there are options for 8 and 16 kg.

Peculiarities

It should be noted that the TekhnoNIKOL corporation, known in the building materials market since 1992, has a research center, whose developments are being actively implemented at their own enterprises. Sealant "TechnoNICOL" No. 45 - a mixture for qualified, professional use.It has all the advantages of butyl rubber compounds, is UV resistant, dries up in about an hour. Recommended for use in all climatic regions. Previously produced "Hermabutil-S" can be considered an analogue of this product. The composition is indispensable where sealing and waterproofing of building structures is needed, while the building material can be almost any.

If we talk about sealing, then these are joints (seams, joints) of buildings made of reinforced concrete, concrete, metal, external walls, adjacent balcony slabs, window and balcony blocks. With the help of a sealant, buildings made of concrete, reinforced concrete are waterproofed. The composition is used for external corrosion protection of sheet steel buildings, modular wooden buildings, ceramic slabs, glass.

Safety regulations

In order for the sealant application process to take place safely, you must follow simple safety rules. We must not forget that the composition is not intended for use inside living rooms, it cannot be applied next to an open flame. In the process of applying the sealing mixture, be sure to protect the respiratory tract with a respirator, wear goggles to protect the eyes, and thick rubber gloves in order to protect the skin of the hands from contact with the chemical.

It is necessary to apply the material slowly, carefully so that it does not come into contact with the eyes and skin. If the sealant gets in the eyes or on the skin, immediately rinse the contaminated area with plenty of tap water.

If you follow the storage rules and store the products in the recommended temperature range, then the shelf life is 18 months. It is necessary to store the composition in a dry place protected from sunlight, with a temperature of -20 ... + 30 degrees, in which case the technical characteristics will not deteriorate.

Description

Since 1992, the TechnoNIKOL company began its activities, this corporation has its own research center, the developments of which are quickly introduced into the production of modern sealing products. TechnoNICOL sealing compound No. 45 is suitable for use by professional, qualified specialists. This product has all the advantages of butyl rubber formulations. No. 45 has good UV resistance, dries very quickly, about 1 hour. It can be used in any climatic region of our country. Hermabutyl-S, manufactured by Technonikol, is considered a similar product in terms of properties.

TechnoNICOL No. 45 is excellent for use in those places where high-quality, reliable and durable waterproofing and sealing of building objects and structures is required, the sealant can be successfully used for all types of materials and surfaces. It is suitable for sealing various joints, seams and other joints of reinforced concrete buildings, as well as structures made of metal, concrete, brick exterior walls, balcony blocks, windows and balcony slabs that adjoin walls. This sealant provides durable waterproofing to any reinforced concrete and conventional concrete structures. The material is used as an external anticorrosive layer of structures made of steel, iron, as well as wooden products and publications, glass and ceramic surfaces.

It is interesting: Features of pine lining: explain in detail