Varieties of blocks
New equipment and advanced technologies are used in the production of blocks. This results in high quality products with good shapes, sizes and other parameters.
There are the following types of material:
- Ordinary - have flat sides. Such a block is used for the construction of load-bearing walls not exceeding two floors. They are made in a three-layer version and have excellent energy-saving qualities.
- Tongue-groove - have rectangular shapes, a ridge-groove system is formed at the end, which, during laying, plays the role of adhesion, giving the correct direction, tightly rubbing adjacent elements. This feature makes it possible to save adhesive composition. The available ledges allow you to conveniently and reliably grip the block during work.
- Partitional - the thickness of such blocks is ten to fifteen centimeters. They are used to remove partitions and self-supporting walls. It is allowed to use it in a load-bearing wall, but only in compliance with all building codes. The dimensions of such material are large - 28.8 cm in height and 60 cm in length. So for the construction of one square meter of the wall, you will need no more than five to six blocks, which significantly reduces the time.
- U-blocks - of which they arrange hidden lintel elements, are used for arranging non-removable formwork. This type of block material is used to form window and door openings, and erect columns.
What is the optimal wall structure in terms of cost and risk minimization?
Despite the claims that the gas block does not need insulation, residential buildings are usually made with a layer of thermal insulation, on which the facing layer is attached from above. This option makes it possible to save on heating in the future and be confident in the strength, reliability of the building, which will not collapse from moisture. The most popular insulation options are mineral wool and expanded polystyrene.
Mineral wool insulation
Mineral wool is a fiber insulation of inorganic origin. The material is made from various rocks, binder and glass. Due to the fibrous structure of cotton wool, air is retained in the thickness and thus insulates the room from the cold, acting as a high-quality and relatively inexpensive insulation.
The main advantages of mineral wool as insulation:
Long service life - 25-40 years.
Environmental friendliness and safety for human health due to the absence of hazardous synthetic components in the material.
Non-flammability and lack of smoke formation under open fire, which is extremely important for residential buildings.
Low level of hydrophobicity - cotton wool does not absorb moisture at all, but brings it out.
Chemical and biological resistance, inertness.
Low level of deformation - the insulation does not lose its original shape over time.
Good vapor permeability (which is important for aerated block walls, which cannot be finished with impermeable materials, thereby provoking moisture retention inside).
Versatility as an insulating material - not only retains heat, but also prevents sounds from passing through.
Mineral wool for insulation has been used for a long time and has managed to establish itself as an excellent material that fully copes with its tasks, inexpensive and easy to install.
What is the best way to insulate aerated concrete walls:
- D300 (wall thickness 20 centimeters) and mineral wool 5 centimeters thick.
- D400 (20 centimeters) and 10 centimeters of mineral wool.
- D400 (30 centimeters) and mineral wool 5 centimeters.
- D500 (20 centimeters) and 15 centimeters of mineral wool.
- D500 (30 centimeters) and mineral wool 10 centimeters.
- D500 (40 centimeters) and mineral wool in a layer 5 centimeters thick.
These are options that are relevant for central Russia.For the southern regions, the values are less, for the northern ones, more.
Warming with expanded polystyrene
Extruded expanded polystyrene (aka expanded polystyrene) is supplied in the format of plates made of a material of a dense cellular structure with a closed type of pores. This gives the polystyrene strength and the ability to resist moisture. The material is usually used to insulate foundations, roofs, basements, but it is better not to cover the outside with this heat insulator, as it will cause moisture to accumulate.
Despite the peculiarities of the material, it is still used for aerated concrete due to such advantages as durability, incombustibility, high heat-saving characteristics, the ability to take the dew point out of the walls, simplicity and ease of installation, low cost. You can insulate aerated concrete walls with expanded polystyrene with your own hands: installation involves calculations, the purchase of sheets, their cutting and fastening to self-tapping screws.
The thickness of the expanded polystyrene is 2-10 centimeters, if necessary, the sheets can be fastened in half. It is also possible to order panels of the required thickness from the factory on an individual basis. For the D500 brand with a thickness of 30 centimeters, sheets 10 centimeters thick are sufficient: the insulation will provide all the necessary indicators of thermal insulation.
Production control
If you need to start construction for a small amount of money, then aerated concrete is ideal. Aerok is a famous company whose products meet the following characteristics:
- The main feature is considered to be the materials from which the blocks are made. This includes only inorganic components such as cement, limestone, sand, gypsum, water, aluminum powder.
- Aerated concrete from this manufacturer can be used for construction in any climatic conditions.
- It is easy and simple to carry out the processing of blocks during construction.
- The use of aerated concrete allows you to save on the construction of the foundation and wall insulation.
- Blocks are manufactured in various sizes, colors and shapes.
It is worth talking about the latter in more detail.
Advantages of aerated concrete and its use
In production they use:
- sand;
- cement material;
- lime;
- gypsum;
- water and aluminum powder.
Such a composition and structural porosity of the blocks provide the following characteristics to the Aeroc gas block:
- a light weight. This facilitates the process of transportation and installation work;
- low density indicator;
- excellent vapor permeability;
- good thermal insulation due to the existing air bubbles, which allows you to save on insulation material;
- high level of noise insulation;
- open flame resistance;
- the material is very easy to process;
- any person who does not have the proper experience can masonry from such blocks.
These properties were able to provide aerated material with good popularity in the construction industry. Its use allows you to create a favorable indoor climate, which will not be affected by climatic and seasonal conditions.
> Aeroc gas block is used not only for the construction of low-rise buildings, but also for the construction of large objects. Walls and partitions are laid out from it, used as additional insulation and for arranging floors.
Energy efficient wall options
The combination of various materials of the Aeroc company makes it possible to implement individual projects of 2-3-storey buildings with the maximum economic benefit for consumers. The thickness of the walls in single-layer and double-layer structures does not exceed 400 mm.
At the same time, the high thermal insulation parameters of the materials are preserved. Instructions for the installation of various options for wall systems:
First option
This option assumes sharing:
- main elements "AEROC" "EcoTerm" "SuperPlus" with a density of 300 kg / m3, concrete class B2.5;
- insulation boards "Energy" -150 kg / m
In this case, the thickness:
- main elements 300 mm;
- insulation - 100 mm.
The heat transfer resistance of such a structure will be 5.3 m2 * K / W.
AEROC EcoTerm SuperPlus D300 + Energy
Second option
The structure of the walls is made of:
- main blocks "AEROC" "EcoTerm" "SuperPlus" with a density of 400 kg / m3, concrete class B2.5;
- insulation boards "Energy" - 150 kg / m
The result is a two-layer wall with a thickness of:
- main blocks 300 mm;
- insulation - 100 mm.
The heat transfer resistance of this wall structure will be 4.5 m2 * K / W.
"AEROCEcoTermSuperPlus" D400 + "Energy"
The third option
The wall structure is made of AEROC blocks "EcoTerm" "SuperPlus" with a density of 300 kg / m3, concrete class B2.5, thickness 375 mm.
The heat transfer resistance of this wall structure will be 4.3 m2 * K / W.
"AEROCEcoTerm" "SuperPlus"
Fourth option
Installation of wall structures from:
- the main elements of the EcoTerm brand SuperPlus-300 kg / m3 and concrete class B2.0;
- insulation boards "Energy" - 150 kg / m
The result is a two-layer wall with a thickness of:
- main blocks 375 mm;
- insulation - 100 mm.
The heat transfer resistance of this wall structure will be 6.1 m2 * K / W.
"AEROCEcoTermSuperPlus" + "Energy"
Aerated concrete wall masonry technology "Aerok"
Wall masonry layout using Aerok blocks:
- Aerated concrete block "Aeroc";
- Interblock adhesive seams;
- Cement-sand mortar for leveling;
- Two-layer waterproofing;
- Building foundation;
- Cut-off part of the additional gas block;
- Vertical interblock joint without adhesive solution.
Wall masonry from Aerok gas blocks
With a fairly large number of manufacturers of aerated concrete products on the construction market in Russia, Aeroc aerated concrete blocks occupy one of the leading positions. The choice of a brand of wall products requires an individual approach, but you should not save on this.
Material cost and quality
Manufacturers of aerated concrete block material offer consumers an advantageous ratio of product quality and price. Note that the issue of savings lies not only in cost, but also in the use of special glue for masonry work.
The savings on heating the room are also taken into account, because the thermal insulation qualities of aerated concrete blocks make it essential.
The cost of blocks in Russian regions is practically the same. It is formed from the size of the purchased batch, the type of blocks, the distance of delivery, the season.
Aerok blocks represent an excellent opportunity to reduce the cost of construction work, while maintaining the quality of the object. Even inexperienced builders can use it if they conscientiously study the technological features of the work. Today blocks are popular among other building materials.
Aerated concrete Aerok produced by Berezan
| Aerated concrete Aerok produced by Berezan | ||||
| Block sizes, mm | Smooth / groove-comb. | Number of blocks per pallet |
Wall area 1 m3 / m2 |
|
| m3 | PCS | |||
| AEROC D300-2.5; F-100 | ||||
| 300x200x600 | ch. / groove-gr. | 2,16 | 60 | 3,3 |
| 375x200x600 | groove-row | 2,25 | 50 | 2,7 |
| 400x200x600 | smooth | 1,92 | 40 | 2,5 |
| 500x200x600 | groove-row | 1,8 | 30 | 2 |
| AEROC D400-B2.5; F-100 | ||||
| 100x200x600 | smooth | 2,16 | 180 | 10 |
| 125x200x600 | smooth | 2,1 | 140 | 8 |
| 250x200x600 | smooth | 2,1 | 70 | 4 |
| 280x200x600 | smooth | 2,016 | 60 | 3,6 |
| 300x200x600 | ch. / groove-gr. | 2,16 | 60 | 3,3 |
| 375x200x600 | groove-row | 2,25 | 50 | 2,7 |
| 500x200x600 | groove-row | 1,8 | 30 | 2 |
| AEROC D500-B2.5; F-100 | ||||
| 75x200x600 | smooth | 1,8 | 210 | 13,3 |
| 100x200x600 | smooth | 1,8 | 150 | 10 |
| 125x200x600 | smooth | 1,8 | 120 | 8 |
| 250x200x600 | ch. / groove-gr. | 1,8 | 60 | 4 |
| 300x200x600 | smooth | 2,16 | 60 | 3,3 |
Each batch of aerated concrete has a quality certificate from the manufacturing plant. AEROC wall structures have passed comprehensive tests in thermal physics, deformability and strength of masonry, acoustics, seismic loads, fire resistance, radiology at the basic research institutes of the Ministry of Regional Development of Ukraine, the Institute of Hygiene and Medical Ecology, the Testing Center of the State Department of Fire Safety of the Ministry of Emergency Situations of Ukraine, on the basis of which the company guarantees the highest consumer properties of its products.
Product range of Aerok Berezan
Blocks AEROC EcoTerm Super Plus 300 - Used for the construction of external walls of buildings with increased thermal performance. The thermal insulation of external walls made of AEROC EcoTerm Super Plus blocks is 20% higher than the thermal insulation of walls made of AEROC EcoTerm blocks or aerated concrete blocks with a density of 400 from other manufacturers.
Wall blocks Aeroc EcoTerm - Designed for the erection of external load-bearing walls in low-rise (2-3 floors) construction, as well as for filling the external self-supporting walls of monolithic-frame structures without limiting the number of storeys.
Wall blocks Aeroc Classic - Designed for the construction of external load-bearing walls in low-rise (up to 5 floors) construction, for internal load-bearing walls and non-load-bearing partitions, as well as for filling the external self-supporting walls of monolithic-frame buildings without limiting the number of storeys.
U-shaped aerated concrete blocks - Designed for use in the construction of a one-piece stiffening belt, supports for floors, beams, Mauerlats and rafters, to obtain lintels in the construction of openings for windows and doors. The dimensions of the U-blocks are similar to the existing dimensions of the blocks used for the execution of ordinary masonry, having a length of 600 mm. The thicker sidewall of the U-block should be located outside the wall.
Aeroc lintels - These are single-span beams, the characteristics of which allow them to accept an evenly distributed load
It is important to remember that it is not advisable to load the lintels with loads concentrated at several points. Aeroc lintels are reinforced so that floor panels can be supported directly on the lintel, avoiding additional masonry of a row of blocks
Heat-insulating blocks AEROC Energy - Purely heat-insulating and used as external insulation slabs of the load-bearing wall made of aerated concrete of other materials. Thermal insulating blocks AEROC Energy with a density of 200kg / m3 can be used to insulate types of brickwork of large-format ceramics of expanded clay concrete blocks. Also during thermal modernization of the facades of already constructed buildings. The actual strength of the products of 1.2 MPa allows them to be transported over long distances without violating their integrity and to carry out the installation of blocks without fear of damage.
Types of gas blocks, description of parameters
Depending on the intended purpose, strength class and density, the following brands are distinguished:
- EcoTerm Plus D300 - products suitable for erecting partitions of single-layer load-bearing masonry with a smooth surface and convenient grip pockets.
- EcoTerm D400 - aerated concrete blocks with a gas-comb system, flat partition walls and paired ones with a guaranteed compressive strength of at least 2.5 MPa.
- AEROC Classic D500 - the same, with a class upgraded to B 3.5.
- AEROC Hard D600 - gas blocks for specialized purposes: construction of solid walls of industrial and public facilities (with subsequent insulation with lighter materials), curtain wall systems, areas for fastening heavy structures.
Regardless of the type, these gas blocks are mounted on a thin layer of fine-grained construction glue, the best indicators of strength and thermal insulation are achieved when purchasing the brand of the same name.
The main characteristics of Aerok aerated concrete products:
| Series name | Guaranteed strength, MPa | Density, kg / m3 | Thermal conductivity under normal conditions, W / m ° C | Frost resistance | Shrinkage, within mm |
| EcoTerm Plus | 2,0 | 300 | 0,088 | F100 | 0,3 |
| EcoTerm | 2,5 | 400 | 0,11-0,13 | ||
| Classic | 2,5-3,5 | 500 | 0,145-0,16 | ||
| Hard | 3,5 | 600 | 0,16-0,19 |
Optimal thermal insulation characteristics are observed in lightweight aerated blocks (D300-D400), with an increase in density, the ability to preserve heat deteriorates. All of these brands are suitable for the construction of load-bearing walls, the scope of application is limited only by their size. D300-D500 with a thickness of 300 mm and more are used for quick erection of single-row energy-saving masonry without the need for external insulation, D600 are specialized and are mainly used as structural ones.
The cost of gas blocks
| Name | End face type | Density grade | Dimensions, mm | Price for 1 m3, rubles |
| EcoTerm Plus | Smooth with grip pockets | D300 | 300×250×625 | 3500 |
| EcoTerm | Smooth, no pockets | D400 | 85×250×625
100×250×625 150×250×625 |
3600 |
| Paired, groove-comb | From 200 × 250 × 625
up to 400 × 250 × 625 |
|||
| Classic | Smooth, no pockets | D500 | 85×250×625
100×250×625 150×250×625 |
|
| Paired, groove-comb | From 200 × 250 × 625
up to 400 × 250 × 625 |
|||
| Hard | Groove-comb | D600 | 200×250×625
400×250×625 |
3650 |
Aerock U-shaped gas blocks can be bought individually (from 145 rubles and more, depending on the size). The rest of the certified products are sold on pallets with branded packaging ranging from 1.7 to 2 m3 (from 32 wall to 128 partition products), the cost of the container is included in the basic price. The quoted prices are valid subject to self-pickup.
Calculation of the pile foundation
Select the type of grillage:
Grillage parameters:
Grillage width A (mm)
Grillage length B (mm)
Grillage height C (mm)
Grillage thickness D (mm)
Concrete grade
M100 (B7.5) M150 (B10) M200 (B15) M250 (B20) M300 (B22.5) M350 (B25) M400 (B30) M450 (B35) M500 (B40) M550 (B45) M600 (B50) M700 ( B55) M800 (B60)
Poles and piles parameters:
Number of poles and piles (pcs)
Column diameter D1 (mm)
Post height H1 (mm)
Post base diameter D2 (mm)
Post base height H2 (mm)
Reinforcement calculation:
Rebar length (m)
Calculation of the grillage formwork:
Board width (mm)
Board length (mm)
Board thickness (mm)
Calculate
Peculiarities
For over three quarters of a century, aerated concrete has been actively used in construction practice.
It finds application in the following areas:
- production of load-bearing and secondary walls;
- creation of auxiliary insulation;
- formation of hardened slabs for overlapping structures.
It is useful to use aerated concrete blocks, since they have the following features:
- extremely flame retardant;
- are distinguished by first-class thermal protection;
- allow you to live equally comfortably in the winter and in the warm season;
- serve for a very long time and differ in a relatively low price (in comparison with products of similar characteristics).
How to use?
Positive feedback is given only by those consumers who strictly and strictly adhere to Aeroc's work technology guidelines. Installation using even the highest quality cement is unacceptable. There is a clear indication - to use a proprietary specialized glue.
This solution has the following advantages:
- preventing the formation of inlet channels for cold;
- exceptional resistance to water ingress;
- stability under strong cooling;
- hardening within 120 minutes (you can correct the immediately detected misses);
- excellent water vapor permeability.
The glue gives decent results strictly under certain conditions. For its application, the air must have a temperature from +20 to +22 degrees with a relative humidity of 55%. When it is necessary to build or renovate a building at low temperatures, it is advisable to take a specialized branded solution instead of glue. Subject to the regulatory requirements, storage of the composition is possible for 12 months. All products of the company are distinguished by an excellent proportion of strength and gravity, which makes it possible to give structures a high load capacity with low thermal conductivity.
Gas block (aerated concrete) AEROC EcoTerm
The BUDPOSTACH company especially for you offers to purchase various building materials (for example - Brovary aerated concrete) at an inexpensive cost. Call us and order any building materials. We will answer any of your questions!
Gas block (aerated concrete) AEROC EcoTerm is used for
erection of buildings up to 3 floors. Thanks to the tongue-and-groove system,
available on the product allows you to create the effect of "thermal lock". This
peculiarity aerated concrete blocks Aerok Ecoterm allows you to keep warm and is 20% higher than the standards in force in Ukraine for the thermal protection of buildings.
Details of gas-block (aerated concrete) AEROC EcoTerm Obukhov is given in the table:
|
Sh-na, mm |
W-that, mm |
Length, mm |
Wednesday density dry, kg / cubic meter |
Class | Frost-st, cycle | Heat conductivity | Block volume, cubic meters | Weight, kg |
Qty blocks on a pallet, cubic meters / piece |
|
| 75 | 200 | 600 | 500 | 2.0 | 100 | 0,10 | 0,009 | 5,1 | 1,89 | 210 |
| 100 | 200 | 600 | 500 | 2.5 | 100 | 0,10 | 0,012 | 6,7 | 1,8 / 1,92 | 150 / 160 |
| 200 | 200 | 600 | 500 | 2.5 | 100 | 0,10 | 0,024 | 13,5 | 1,68 / 1,92 | 75 / 80 |
| 250 | 200 | 600 | 500 | 2.5 | 100 | 0,10 | 0,03 | 16,9 | 1,68 | 60 |
| 280 | 200 | 600 | 500 | 2.5 | 100 | 0,10 | 0,033 | 18,55 | 1,68 | 50 |
| 300 | 200 | 600 | 500 | 2.5 | 100 | 0,10 | 0,036 | 20,2 | 1,8 | 50 |
| 375 | 200 | 600 | 500 | 2.5 | 100 | 0,10 | 0,045 | 25,3 | 1,8 | 40 |
| 400 | 200 | 600 | 500 | 2.5 | 100 | 0,10 | 0,048 | 27 | 1,68 / 1,92 | 35 / 40 |
| 500 | 200 | 600 | 500 | 2.5 | 100 | 0,10 | 0,06 | 33,7 | 1,8 | 30 |
| 75 | 250 | 600 | 500 | 2.5 | 100 | 0,10 | 0,011 | 6,3 | 1,89 | 168 |
| 100 | 250 | 600 | 500 | 2.5 | 100 | 0,10 | 0,015 | 8,4 | 1,92 | 128 |
| 200 | 250 | 600 | 500 | 2.5 | 100 | 0,10 | 0,03 | 16,9 | 1,92 | 64 |
| 240 | 250 | 600 | 500 | 2.5 | 100 | 0,10 | 0,036 | 20,2 | 1,728 | 48 |
| 300 | 250 | 600 | 500 | 2.5 | 100 | 0,10 | 0,045 | 25,3 | 1,8 | 40 |
| 365 | 250 | 600 | 500 | 2.5 | 100 | 0,10 | 0,055 | 30,8 | 1,752 | 32 |
AEROC EcoTerm blocks are rectangular parallelepiped with precise
geometry (± 1 mm), groove-comb system, which serve as
guides when laying blocks and perform the function of a "thermal lock" on
vertical seam. AEROC EcoTerm units have pockets for convenience
grippers, which facilitate the process of laying and carrying blocks when
construction.
Scope of products
AEROC EcoTerm wall blocks are designed for the construction of outdoor
load-bearing walls in low-rise (2-3 floors) construction, as well as for
filling external self-supporting walls of monolithic-frame buildings without
restrictions on the number of storeys.
AEROC EcoTerm 250 products are generally intended for the construction of
exterior walls of small buildings (for example, country houses) for
seasonal residence. Blocks AEROC EcoTerm 300 and AEROC EcoTerm 375
are used for the construction of external walls of buildings with a permanent
the nature of the residence. Moreover, the thermal insulation characteristics of external
walls made of AEROC EcoTerm 375 blocks, almost 20%
exceed the most stringent regulatory requirements of Ukraine for thermal
protection of buildings.
Block masonry
Thanks to the precise geometry of the AEROC EcoTerm blocks, wall masonry
carried out with the use of AEROC adhesive or other adhesive
formulations recommended for use by AEROC. Thickness
the masonry joint is only 2 ± 1 mm, which completely excludes
heat loss in the walls through the so-called "cold bridges". Wherein
the finished wall turns out to be so flat that there is no need for
additional work on its internal alignment.
Product Code: GB-8
Price: 1505 UAH.
in stock
Make an order for the product "Gas block (aerated concrete) AEROC EcoTerm"
* Upon receipt of a preliminary order for the product "Gas block (aerated concrete) AEROC EcoTerm" - our employee will form the exact cost and inform you.
We advise you to see similar products
| Gas block (aerated concrete) Sumy 200x30 ... Cost: 1500 UAH. | We advise you to see also the product - "Gas block (aerated concrete) Sumy 200x30 ..."... Perhaps it has a lower cost or material properties - "Gas block (aerated concrete) Sumy 200x30 ..." will be more acceptable to you. | Price for gas blocks, foam blocks, hectares ... Price: 1505 UAH. | We advise you to see also the product - "Price for Gas Blocks, Foam Blocks, Hectares ..."... Perhaps it has a lower cost or material properties - "The price for gas blocks, foam blocks, hectares ..." will be more acceptable to you. |
← Back
Distinctive features of this brand
1. Resistance to any external influences, which ensures the possibility of operation in various climatic conditions. In terms of its mechanical properties, AEROC is no different from ordinary stone. Minimal risks even from deliberate damage to the surface. Does not deteriorate from insects and rodents. Absolutely does not react to ultraviolet light, changes in temperature, pressure or humidity.
2. By its composition, aerated concrete is 100% mineral. It is not subject to combustion, does not deform under the influence of high temperatures. In fact, it is capable of "blocking" a possible ignition source.
3. Simplicity of construction work. AEROC aerated concrete blocks are easy to handle. If necessary, it is easy to cut them with an ordinary "hacksaw". Even an unprepared person on his own in 15 - 20 minutes will be able to lay out 1 m2 of walls. There is no need to invite specialists and pay for their services. You don't have to look for (or purchase) special tools. What is in any home is enough. The elements are fastened together using an adhesive composition. Therefore, such troublesome and rather lengthy work, such as preparation and mixing of the solution, is excluded.
4. Low thermal conductivity of AEROC products allows installation of thinner walls than other materials. Moreover, they can be additionally not insulated. The main thing is to correctly calculate the thickness.And given the low weight of the blocks, a lightweight foundation can be made for such a structure. Practice shows that only for the preparation of the foundation of the building, up to 1/3 of all funds provided for by the estimate for the production of construction work are spent. The savings are tangible.
5. Large selection of products in shape and configuration. The products are manufactured in Classic, EcoTerm, Element, U-block designs. This allows them to be used for the installation of any part of the building.
Opinions
It is clear that all kinds of advertising have already taught people not to believe it. In order to more objectively evaluate the benefits of the products, you should read the reviews of the Aerok aerated concrete from people who have already built houses from it.
“I believe that the service life of any building depends not only on the quality of the building material, but also on how all technologies were followed. I carefully studied the recommendations on this issue, read the literature. I will say right away - I did not feel the difficulty in building a house from AEROC blocks. Aerated concrete is very easy to cut and assemble. I didn't have to hire a team. During the summer period, I myself and my sons basically did all the work. Interior decoration does not count. We lived through the winter. The house is warm, no drafts, the walls do not get wet. Compared to my "Khrushchev" - day and night. I recommend to everyone."
Victor, Voronezh.
“Our small house has long been subject to demolition. We decided to do so. And on the site to build a good, solid house, fortunately, the size allowed. We thought a lot about what. I didn't want a wooden one, but I didn't have enough money for a brick one. There is one foundation worth something. My son-in-law advised to build from aeroc aerated concrete. We calculated everything, and it turned out that it was not very expensive. Specialists were invited only for the laying of power supply and sewerage. And we did the rest of the work ourselves. The house turned out to be very warm and cozy. I am sure we have made the right decision. "
Antonina Sergeevna, Petrozavodsk.
“I'll tell you right away - I liked the prices
This is important for our young family, so we decided to buy aerated concrete from AEROC. Finished (mostly) construction in a short time, which the wife is very happy about
They began to settle down, and I came to the conclusion that aerated concrete is very convenient both for decoration and for interior design. The material is strong, but easy to drill. Therefore, there were no problems with different hanging cabinets. A ventilated facade was installed, they didn't even insulate it. During the winter, the house was never cold. We were scared that we would freeze with a small child. Nothing like this. Everything is just great, we are satisfied. "
Nikolay, Moscow region.
The price depends on the type, size and density. The average cost for the most used blocks: 400 kg / m3 (100 x 250 x 625mm) - from 65 rubles. For 1 m3 - 3 444 rubles.
Aerated concrete plant "Aeroc"
Compliance with the quality of blocks to all existing standards and requirements is controlled by our own factory laboratory at different stages of the production process and for finished products. Therefore, the properties of Aerok wall materials meet the most stringent international standards.
Technological characteristics of aerated concrete blocks
Thanks to the perfection of modern technology for the production of this building material, it is endowed with many important qualities required in modern construction. The main characteristics of aerated concrete blocks:
- Moisture resistance, which makes the material very durable;
- Thermal efficiency, the coefficient of which for aerated concrete with a density of 400 is 0.098;
- Frost resistance, which is enhanced by the capillary-porous structure of the block;
- Environmental friendliness, according to which this material is second only to wood;
- Non-combustibility, due to which the construction of the blocks is absolutely fireproof.
An important argument in favor of using this wall material is its low thermal conductivity, which is especially appreciated in the construction of residential buildings. Also, the blocks are very light, which is convenient in making masonry from them.The low weight, together with the high bearing capacity of the masonry made of AEROC gas blocks, makes it possible to erect buildings up to 5 floors high from them.
Aerated concrete blocks have very flat surfaces, have good adhesion, and therefore a thin grout seam is enough for them to form a strong masonry. For all their unpretentiousness during construction, they quickly form a reliable wall structure, in which they can very steadily withstand vertical pressure. For individual residential construction in the North-West region of Russia, the best option is a single-layer wall of Aerok D300 blocks.
The working part of the block of this brand is either smooth or with a structure of grooves and ridges, which allows you to connect all the masonry into a lock. This reliably strengthens the wall, simplifies the process of its formation, and saves the amount of adhesive solution used. Also, to make the blocks easier to grip and carry, at the ends they are supplemented with hooks such as pockets.
Aerated concrete blocks Aerok are a very economical building material. Due to their different dimensions, a very thin single-layer wall can be erected from them, while possessing the highest level of thermal protection. You can purchase this wall material at reasonable prices in our warehouse, using, if necessary, the advice of our specialists. At the same time, you do not have to go to the store in search of this material, look for transport, wasting time and money. You just need to make an application on our website, and we will ensure its prompt delivery to the construction site.