Electric Sealant Guns

How to use it correctly?

Using an electric sealant gun is easy. The main thing is to follow the sequence of actions.

• First of all, it is necessary to prepare the tube for further use. Its nose is trimmed at a 45 degree angle. Given its tapered shape, the amount of sealant to be squeezed out can be matched to the thickness of the joint. Experts advise beginners to make the first cut the smallest and, if necessary, enlarge it. Some recommend simply piercing the opening, but because of this, the resistance of the squeezed out material increases dramatically, which negatively affects the work.
• After opening it is necessary to refuel the pistol. At this stage, it can be difficult if you are doing everything for the first time. First you need to loosen the locking nut of the gun. Retract the stem to the stop. Insert the container with the sealant into the body and fix it. After that, you can start sealing the seams.

• The surface must be treated before application. Dust, dirt or oil will adversely affect the adhesion of the surface and the sealant. You also need to dry the place of the future seam. It is not recommended to make it wider than 12 cm.
• Seam filling is the fourth step. It is very simple. You need to pull the trigger of the gun under the sealant, moving it as the joint is filled.
• The final step is "smoothing" the seam with a spatula.

Characteristics DEKO DKCX01:

• the tool is a hand-held electric spray gun powered by a 220 volt network;
• power of the electrical unit 550 W;
• the idle speed of the motor without load is 32,000 rpm;
• adjustable length and shape of the spray allows you to choose the desired spray pattern;
• weight without paint is 1560 grams;
• removable paint tank has a volume of 800 ml;
• Three removable nozzles with 1, 1.8 and 2 mm bore diameters allow for a variety of tasks;
• the body is made of durable plastic, and the handle with rubber inserts and an ergonomic shape is very comfortable in the hand;
• The spray gun is available in yellow colors with black and white inclusions.

In addition to the DEKO DKCX01 paint spray gun itself, the delivery set includes a special key, rubber protective gloves, a mask, a sieve for filtering paint, a cleaning needle and a viscometer for determining paint viscosity.

To achieve the desired viscosity, the flow rate of paint through the viscometer should be within 15-30 seconds, but for himself the consumer must deduce the rate empirically, since much depends on the type of paint, the diameter of the spray nozzle and the ambient temperature.

Possibilities of using the DEKO DKCX01 spray gun at home:

• painting wooden posts and fences, as well as walls of houses with water-based facade paint;
• painting of ceilings and floors in rooms;
• painting of wood and metal products in the workshop;
• touch-up of repaired areas of car bodies;

These are just a few examples of how you can use the DEKO DKCX01 spray gun in your home. In real life, these options are much more, because a person who bought such a spray gun will forget about painting with brushes, since spraying paint is not only more comfortable in work, but also significantly saves paint, despite the fact that the surface will be painted much smoother than when working with a brush.

By changing the nozzles of the spray gun, you can achieve the desired shape of the jet and the density of the paint spraying.In this case, you can use various types of paints, varnishes and enamels - alkyd, water-based, nitro-varnish and so on.

Thus, if at home, in the garage or in the country you need to do painting work, you should pay attention to the DEKO DKCX01 paint spray gun, which will significantly help in this matter.

Products processed with DEKO DKCX01 have a high quality painted surface due to even spray and stable tool performance!

Which company is better to buy electric spray guns

Such a tool is quite common in the lines of European and Asian manufacturers. Russian, Belarusian, German and Chinese goods are especially popular. In terms of cost, they are all practically the same.

You can safely include in the rating of the best companies:

• Bison is a large Russian manufacturer of construction equipment, which is repeatedly tested at the plant during the development process. In terms of sales volume and assortment, it holds the palm.
• Bosch is a well-known premium German brand. It is an excellent choice for those who value reliability, practicality and high quality of construction tools. His products are the most expensive on the market, but this is quite logical.
• Wagner - This international company has been developing colorful spray guns since 2009. There are options here for both professionals and inexperienced users. Most products come with a 12-month warranty, some of which are extended to three years.
• Caliber - since 2001, the company has been producing all the power tools that are needed in everyday life, and every year it adds new items to its catalog. The main sales are made in the territory of the Russian Federation.
• Fiolent is a trademark of the leading manufacturer in Russia, showing a high level of technological preparation. They are just starting to work with paint sprayers, so the company offers only one model of the tool.

The largest dealer network in the world is organized by the manufacturers Bosch and Wagner. Products under the brands "Caliber", "Fiolent" and "Zubr" are sold mainly in Russia, Ukraine, Belarus.

13 good tile cutters according to customer reviews

Criterias of choice

If you intend to use the device for domestic purposes, it is better to buy one that is suitable for sealants in cartridges of 280-310 ml. Larger volume sealant devices are professional and are more suitable for a significant amount of work. For two-component formulations, special pistols with mixing nozzles are available.

Other aspects of the selection of rechargeable devices are as follows:

1. Frame. Devices with an aluminum body are used for installing tubes, with a steel one - they are suitable for sturdy cartridges.
2. Weight, ease of use. Before buying the tool, you need to take it in your hand, check whether it will be convenient to use it.
3. Integrity. The pistol should not have chips, cracks, or other defects.

Characteristics of DEKO DEGG01 Electric Sealant Gun:

• this is a power tool for home use, although it is perfect for those who systematically work with the use of sealant, for example, window installers or plumbing installers and repairmen;
• the electric motor of the pistol operates on a voltage of 6 volts, provided by 4 AA batteries, which are not included in the delivery set. Batteries will have to be purchased separately, and for long-term operation it is best to purchase high-capacity rechargeable batteries;
• the pistol is made in a classic yellow-black color, by which DEKO tools can be immediately recognized among many analogues;
• the tool is made of durable and at the same time pleasant to the touch high-quality plastic, and the socket for attaching the tube, on which pressure will be exerted during operation, as well as the pressure rod to ensure rigidity are made of durable iron;
• the nozzle of the gun is made to the size of the tube of a standard sealant sold in all hardware and hardware stores;
• preparation of the pistol for operation consists in installing 4 AA size batteries (finger-type) into a special compartment in the handle, pulling the pistol pressure lever back, installing a tube with sealant into the bell of the gun, removing the protective cap from the tube in advance and cutting off the end of the spout from which the sealant will be squeezed out ;
• uniform operation of the electric motor allows the sealant to be squeezed out at a constant speed without jerking, which makes it possible to evenly lay the sealant along the entire length of the gap;
• for long-term work with long seams, it is recommended to use a lock that holds the trigger in a clamped position, which will greatly facilitate the work with the gun;
• the length of the pistol is 35 cm, the height is 21 cm, and the diameter of the bell is 7 cm;
• the weight of an electric gun for working with a sealant is only 920 grams, which, even with a mass of sealant, in total, will make it easy to work with it with one hand without fatigue for a long time;
• the ergonomic rubberized pistol grip is very comfortable to use and very pleasant to the touch.

Anyone who has to work with sealant should take a look at an electric sealant gun. Lightweight, quiet and very easy to use, the DEKO DEGG01 sealant gun will fill the joints with an even and continuous layer of sealant, ensuring reliable adhesion of surfaces and full sealing!

Working with the sealant is a pleasure with DEKO DEGG01 gun - it is so convenient and effective!

Operating instructions for brushcutter "Caliber"

An instruction is a kind of trimmer passport, which contains complete information about the tool, as well as the simplest operating techniques and the basics of servicing the unit. Any instruction manual contains the following sections:

1. The device of a brushcutter, its stage-by-stage assembly in pictures and with detailed descriptions.
2. Specification table of the purchased model.
3. Safety requirements.
4. Preparing the trimmer for work.
5. Start-up of the mowing unit.
6. Engine break-in (for petrol mowers).
7. Maintenance.
8. Malfunctions.
9. We suggest that you briefly study some sections of the instructions.

Preparation for work

The preparation of petrol cutters and electric cutters is different. First, we propose to understand how the electric mowing units "Caliber" are prepared:

1. According to the descriptions from the manual, the tool is assembled.
2. A mowing head with a line or a knife is put on the spindle and securely bolted.
3. A protective cover is installed above the cutting device, which is attached to the bar.
4. The operator puts on a shoulder corset and adjusts the belt tension to suit himself.
5. The tightening force of the fasteners is checked again.
6. The network cable is checked for damage.
7. Monitoring the voltage in the mains.
8. If all safety requirements are met, the electric scythe is connected to the mains.
9. The mower is started.
10. The operator checks the operability of the controls.
11. The Benzokosa prepares for work in a slightly different way:
12. The "Caliber" petrol cutter is being assembled.
13. Shoulder straps are adjustable for the operator.
14. The mowing head with a line or a knife is securely attached to the spindle.
15. A protective cover is attached to the bar, over the cutting unit.
16. A fuel mixture is prepared from two-stroke oil (additives) and unleaded AI-92 gasoline. The ratio of gasoline and additives is indicated on the oil packaging.
17. The mixture is poured into the fuel tank.
18. A high voltage wire is connected to the spark plug.
19. The ignition is checked.
20. All fasteners are tightened again.
21. According to the manual, the power plant starts up.
22. The operator checks the performance of all organs and mechanisms of the "Caliber" petrol cutter.

If the brushcutter is in good working order, it is necessary to run in the engine, which lasts from 5 to 8 hours. During this period, all rubbing and rotating parts of the trimmer are run in at low loads (no more than half the engine power).

Maintenance

And again, servicing a petrol trimmer is a lot different from servicing an electric trimmer, let's figure it out.

Gas cutters "Caliber" require the following maintenance:

1. Cleaning the petrol trimmer from grass residues and other contaminants.
2. Lubrication of the scythe.
3. Timely cleaning and replacement of the air filter.
4. Replacement-sharpening of a knife, a mowing head with a fishing line.
5. Ignition adjustment, spark plug cleaning and replacement.
6. Tool conservation.
7. Electric models are serviced as follows:
8. The electric scythe is cleaned of grass, dust and dirt every day.
9. During the mowing process, air intakes clogged with grass are cleaned.
10. The knife is changed and sharpened, the fishing line is adjusted.
11. The network cable is checked for damage.

Problems with gasoline and electric trim tabs

Any instrument, no matter how looked after, periodically fails. Let's consider the typical malfunctions of the Kalibr brushcutter. The causes of engine breakdowns are different for petrol cutters and electric scrubbers, but problems with the cutting unit are common. So, everything is in order.

Causes of 2-stroke powerplant malfunctions for gasoline trimmers:

• the fuel mixture is improperly prepared or of poor quality;
• the carburetor is not tuned and overflows fuel;
• there is no compression in the cylinder, oil seals are worn out;
• the spark plug is out of order;
• the high-voltage wire is cut off;
• broken primer - fuel pump;
• the air filter is clogged;
• clogged carburetor;
• ignition problems;
• the cable does not pull out.

Electric braids "Caliber" do not turn on for the following reasons:

• there is no voltage;
• the network cable is disconnected;
• broken cord;
• overheating of the electric motor due to air intakes clogged with grass;
• low frequency of rotation of the knife, the voltage in the network has dropped.

General malfunctions

The grass has stopped mowing:

• check if the line has run out;
• the knife may have become dull.

The trimmer vibrates strongly during operation:

• the disc is deformed;
• the knife is unbalanced;
• the bolts are loose.

The cutting element does not stop:

• broken drive;
• the throttle valve wire is disconnected;
• idle + high revs.

The mowing head stopped rotating, the knife:

• the mounting bolts are loose;
• the drive has broken;
• implement or protective cover blocked by vegetation.

Subtleties of choice

The choice of model depends on where and by whom it will be used, you should think about this in advance before going to the store.

The first thing to look out for is, of course, the absence of damage. It is unacceptable that cracks, chips and other defects are present on the pistol body.
The pistol should fit comfortably in the hand, be light enough and not slippery.
The body material can be steel (for sealant in cartridge packaging) or aluminum (for tubes).
Typically, 280 ml cartridges are used for home use.

Tubes are designed for a wider scope of work and are used by professional builders.

Principle of operation and features

An electric gun is a type of construction and installation tool designed to facilitate and speed up the implementation of sealing joints. It runs on rechargeable batteries, which consume a minimum of electricity when recharged. The mandatory components of the device are the body and the rod with the piston: the latter is actually necessary to squeeze the composition onto a flat base. The sealant from the tube inserted into the gun begins to flow through the nozzle by pulling the trigger.

Rechargeable devices are very easy to use.The application of special physical force is not required to press, and the device does not need to be set up before operation. Many of them have a power regulator, so the feed rate of the sealant can be set as desired. More expensive devices are equipped with a set of nozzles, thanks to which it is possible to change the shape of the seam and select its appropriate diameter. Some guns work only with solid cartridges, others insert soft packages of the "sausage" type and even apply sealant from buckets and cans.