How to dissolve super glue: from metal, plastic, linoleum

How to remove superglue

There are four main groups of methods using which can be removed from the adhesive... The greatest effect can be achieved if a set of measures is applied.

Mechanical tricks

This category includes manipulations in which force is used: scraping, rubbing, knocking down, grinding.

The main disadvantage of such events is the high probability of damaging the base and making the object unusable. If they are used to remove the film from your skin, there is a risk of injury. Therefore, you need to be careful and try not to be zealous.

Exposure to temperature

Although cyanoacrylate is able to withstand temperature extremes, the systematic increased exposure to heat or frost gradually destroys its structure. This can be used to remove stains with an iron, hair dryer or freezer. Typically, these techniques are used to clean fabrics.

Professional remedies

Manufacturers have taken care of consumers and have developed a special tool called Anticlea. It quickly and effectively dissolves dirt, but it cannot be applied to some materials: varnished and painted, as well as certain types of plastic.

Due to its high toxicity, children’s things should not be processed with such a mixture. For the same reason, direct skin contact should be avoided and gloves should be used.

Instructions are attached to each product and must be strictly followed. Otherwise, there is a risk that the composition will not work or damage the surface.

Chemical Compositions

This includes any kind of solvents: acetone and liquids containing it, "White spirit", "Solvent 646", "Dimexide", gasoline, alcohol.

All of these substances destroy cyanoacrylate, making the contamination easy to escape. However, it should be borne in mind that they themselves are very aggressive, and therefore can harm the object being processed and spoil its appearance.

Folk ways

They come to the rescue if nothing more effective is at hand. They act more slowly, but they are safe and not harmful to health. Here is a list of popular folk recipes.

Butter is vegetable or melted butter, even motor oil will do. The principle of operation is that it softens the film at the edges, and thanks to this it becomes easy to pick up and remove. It is suitable for non-absorbent materials. Oil can also remove the adhesive from the sticker.
Vaseline, baby cream - they work in the same way as oil and allow you to remove a layer of glue.
Hot soapy water - cyanoacrylate loses its properties upon prolonged contact with hot liquid, and soap enhances the effect. This is true for fresh dirt. True, this process is slow and time-consuming.
Vinegar - removes stains from delicate fabrics and practically does not affect their appearance.
Lemon juice - does not work quickly, but it is acceptable for use on those surfaces where other cleaners are prohibited, for example, on leather or leatherette products.
Salt or baking soda - These can be used as mild abrasives to remove adhesive from leather or smooth surfaces. To do this, you just need to prepare a gruel from water, selected powder and smear the mark.
Hydrogen peroxide - with its help metal and leather products are cleaned.

Useful Tips

The tube is not directed at oneself, so that the substance does not accidentally get on the skin and face.
The composition contains toxic substances, so the work is carried out in well-ventilated rooms.
If not all the glue is used, the tube should not be folded: there is a possibility that it will crack at the fold and the substance will spill out.
You should always keep the tube of glue to read its composition. Thus, it will become clear the better to remove it from which surfaces.
If the super glue gets into places where it is difficult to get to, for example, a castle, then vinegar essence will help in this case.Using a syringe, it must be poured into the lock, wait a little and clean it with a needle or toothpick. "Antikley" or another solvent will also help to cope with such contamination.

In the process of cleansing, certain rules should be followed. This will allow not only to qualitatively eliminate the stain, but also to prevent damage to the material on which the glue has dripped. Helpful hints are as follows:

A test for the aggressiveness of the cleaning agent should be carried out. First, it needs to be applied to a small area.
Products with an active chemical composition should be used in a ventilated area. It is advisable to use gloves and a mask to protect the respiratory system.
Initially, it is required to use less aggressive substances. If they do not give the desired effect, you can resort to the help of highly effective means.
It is forbidden to apply substances with a chemical potentially hazardous composition on surfaces in contact with food.
Super glue Moment must be applied to the desired area, dosed. Due to the adhesive properties, very little of it is needed.

Advice! In case of acetone poisoning, oxygen should be provided immediately and emergency medical help should be sought.

What chemicals will help clean

Super glue traces should be wiped off before they have time to dry. In this procedure, chemicals help:

Anticlea. Composition with a thick consistency, suitable for working with vertical surfaces. Use on painted or varnished surfaces is unacceptable.
Dimexide. Has a liquid texture, removes super glue from cars, household appliances. Irritating to the skin of the hands, you need to work with gloves.
White Spirit. Organic solvent, dissolves paints and varnishes.
Alcohol. Used for mechanical removal of stains, softens the texture of dirt.

Chemical methods

To remove superglue in this way means to use some kind of chemical such as "Demixide" (dimethyl sulfoxide). It is presented in any pharmacy. This is a tool that facilitates the penetration of medicinal substances into the deep layers of the skin. In addition, it can be used to wipe glue stains from a computer monitor or mobile phone display.

Application of "Dimexidum":

Apply the product with a cotton swab to the surface stained with superglue.
Leave it on for a while.
Remove the stain carefully.
Remove loose particles from the surface with a dry cloth.

This method of getting rid of super glue stains is very effective, the dirt is removed, while the surface remains intact. The disadvantage of "Dimexidum" - the agent very quickly penetrates through the skin into the bloodstream, therefore it is necessary to work with it only with gloves.

White spirit or refined gasoline is toxic but very effective in removing glue. Among the disadvantages, one can single out the fact that the probability of surface damage is quite high and it is necessary to work with these substances only in a ventilated room or in the open air.

Application of white spirit and refined gasoline:

Before use, check how the material to be cleaned reacts to the substance.
From the edges to the center, wipe the dried glue with a cloth or cotton swab dipped in white spirit (gasoline).
Wash the treated area with soapy water (in the case of cleaning the monitor, take a cotton pad or swab moistened with the solution).

Nail polish remover or acetone should be used in a well-ventilated area to remove dried Super Glue from natural fabrics and hard surfaces.

Application of acetone:

Before using the product, be sure to test its effect on an inconspicuous area of surface or matter.
If acetone does not change the structure, color and other characteristics of the material, then proceed with the treatment of the area stained with adhesive.
Wipe away the dried glue stain in a circular motion from the edges to the center.
Then rinse the treated area with soapy water.

Use acetone, gasoline or thinner to wipe the superglue stain off the plastic. Although this is a rather capricious material and chemical treatment often causes deformation or discoloration of the surface.

Not completely dried superglue from plastic will be easier to remove. Spray the area liberally with an all-purpose glass cleaner and scrub with a dry cloth. If the stain fails to be removed the first time, repeat the procedure several times.

How to dissolve dried super glue

In cases where glue spots have been left for a long time and have had time to dry out, common solvents such as water, soapy water or alcohol will be ineffective. In such situations, experts recommend using special formulations.

Dimexide is considered one of the most common among them. It is a dimethyl sulfoxide based solvent with a primary effect on cyanoacrylate. Therefore, the risk of damage to the stained surface is minimized. You can buy Dimexide at any pharmacy at an affordable price.

Other products that can dissolve super glue include:

acetone and its derivatives;
anti-glue containing propylene carbonate or nitromethane;
petrol;
acetone-containing nail polish remover.

Before using anti-glue, you should read the instructions for use.

How dissolve dried super glue, you can watch the video.

How can super glue be dissolved from metal

When gluing iron parts, you often have to face the problem of how to dissolve the super glue from the metal. Acetone or solvent treatment will be difficult. The problem is that these substances tend to evaporate quickly, without having time to react with the damaged area and achieve the desired result.

When the question arises of how to dilute the glue, it is necessary to take into account its composition and properties. When interacting with water or soapy water, it quickly thickens, and when moisture evaporates, it begins to dry out instantly. Therefore, it is impossible to dilute it with these substances. In this case, some people use technical acetone or gasoline.

To completely eliminate contamination, it is recommended to moisten a cloth abundantly with solvent or acetone, apply it to the damaged area and rewind it with tape so as to exclude the access of oxygen. Within an hour, a thermal reaction occurs under the tape: the glue heats up and begins to soften. After the lapse of time, the so-called "compress" is removed, and the remaining adhesive is removed mechanically with a knife, blade or other sharp object.

If minor scratches or streaks remain on the metal, they are carefully rubbed with sandpaper.

The composition of the super glue "Moment" includes components that provide a special strength of the connection. Therefore, without the help of specialists, it can be difficult to figure out how to dissolve the glue moment.

You can do this yourself, at home. To remove super glue "Moment" or "Second" from a metal object, in addition to acetone or a solvent, they also use:

vinegar essence;
ethanol;
White Spirit;
nitromethane.

It is best to try to remove heavily dried stains mechanically. Thus, you can get instant results.

How to dissolve Secunda glue? An ethanol-containing glass cleaner can be used as an effective and fast-acting agent. It is applied to the stained area, left for several minutes, after which the surface is wiped with a dry coarse rag.If necessary, the procedure is repeated several times until the traces disappear completely.

The most affordable solvents

The most versatile natural remedy, when using which you can remove dried traces of carpentry, vegetable, stationery and polyvinyl acetate composition, is water. To clean the surface, it is enough to quickly blot the fresh residue and rinse with water until the sticky marks disappear. Unfortunately, if the stain is old and deeply ingrained, then it is not realistic to remove it using such a solvent.

Another popular means of dissolving glue has proven itself excellently - these are sunflower and baby oils. Each of them needs to rub the dried residue with grease several times and wait a while. It will gradually lose its adhesive qualities and the solvent will mix with it, since many types of adhesive mixtures are made from oil. At the end of the procedure, the remaining traces are easily erased, and the surface is rinsed with water. Vaseline has a similar property, its high fat content contributes to the rapid breakdown of molecules.

Common vinegar can be isolated from natural solvents. You should wipe the stained area with it and wait half an hour. During this time, the stain will begin to lose strength, dissolve in acid, and the remains will need to be wiped off.

A mixture of baking soda and water in a 2: 1 ratio is very effective in this matter. This pasty substance is applied to the contaminated area, waiting for the complete dissolution of the curd and rinsed with water.

An effective solvent is alcohol, which can decompose many adhesive compositions. When applying this drug to the stained area after 5-10 minutes. the firm clot will soften. Further, the remnants are freely removed in the process of wet wiping.

Acetone has a similar effect, but should be used with caution to clean synthetic surfaces. Other well-known solvents are: gasoline, turpentine, white spirit, ammonia. When using them, for greater efficiency, the glue clot is preheated with a hairdryer.

Thus, the process of its removal is accelerated.

When using them, for greater efficiency, the glue clot is preheated with a hairdryer. Thus, the process of its removal is accelerated.

Why is the Moment glue dangerous?

The adhesive contains components that are water-resistant; it will simply not work to remove it with water. It is necessary to remove the Moment glue from the skin as soon as possible.

A small amount of superglue should be immediately cleaned with water and kept fingers in soapy water, then remove the remaining glue with a hard sponge. Repeat the steps until the super-remedy disappears completely. This procedure will take a little over ten minutes.

Do not use gasoline, kerosene. These substances wipe away stains from the gluing surfaces of furniture, fabrics, shoes, leather goods. They not only negatively affect the respiratory tract, but also cause allergic reactions.

Human skin is renewed every month. Glue, when it gets on parts of the body, does not penetrate deeply into the epidermis. If it has not disappeared completely, then it will disappear in a few days with dying skin areas on its own. The glued fingers cannot be separated sharply; this must be done gradually, with rotational movements.

Mechanical scraping

How to remove Moment glue from the skin using abrasive devices:

A pumice stone or a stiff brush will wipe off the product very well after a soapy solution. It is enough just to wipe off the dry stuck together areas of the skin, but the main thing is not to overdo it and not damage the surface of the epidermis. The result will not be the most satisfying - some areas will remain uncleaned, but this natural exfoliation method is the most gentle.
Lady's nail file. With it, gently pick up and cut off the skin.But using a nail file is fraught with injuries, and sticky residues will still have to be removed by other means.

Special formulations

In construction and specialty stores, chemicals are sold for dissolving superglue. The composition is applied to the stain, kept for the time specified in the instructions, then removed with warm water and soap.

Anticlee is usually used to scrub the surfaces of furniture or clothing, but it is also safe for humans. It is enough to unscrew the tube, pierce the membrane and apply the gel to the surface of the hands. You need to wait 7 minutes, then use a fiber and wash off the chemistry in running warm water.

Folk remedies

Folk remedies are simple, and every housewife can find:

Salt - soak your hands in warm water before the procedure. Then sprinkle some salt on the skin and rub in for a few minutes. Clean the formed white paste with running water. Repeat the procedure if necessary. You can use a saline solution by adding lemon juice to it. Add 2 tbsp. To a warm bath. tablespoons of salt and soak your hands.
Baking soda - put your hands in a saucer of warm water, then rub the baking soda into the glue, wash with a warm stream under the tap.
Alcohol or vodka - dip your hands in alcohol for about a minute until you acquire a whitish appearance. The fingers slowly begin to recede, and the glue itself is removed from the skin, like a crust.
Vegetable, almond, butter or margarine - rubbed into the skin until all stains are wiped away. Natural ingredients are very suitable for sensitive skin, provided that the glue is not absorbed deeply.

How to scrub glue with household products

Household kitchen dishwashing detergents will do an excellent job of removing adhesive film. They must be dissolved in a 1: 4 ratio and wiped off your hands with a sponge or washcloth. This removal method will take 5-10 minutes. You can soak your hands in the solution and wait 20-25 minutes until the adhesive is completely removed.

We recommend:
DIY ceiling dryer

Ways to remove glue at home

The following means are used to remove the glue:

Any brand of hand cream, including children's, is suitable for people with dry sensitive skin. It should be applied to a dirty place, wait a while and begin to remove the glue. The cream softens the epidermis and the adhesive itself, which makes it easy to remove.
Petroleum jelly is also an aid in removing the remaining substance when rubbed into the skin.
A feminine cosmetic scrub can be used instead of salt.
Dimexide can be used to lubricate a cotton pad. It heats the fingers, dissolves the glue, the procedure should be carried out in the first minutes after the glue gets in. According to its composition, Dimexide is an excellent anti-inflammatory agent.

Removing super glue from different surfaces

Superglue is a good helper for many small repairs. It can glue wood countertop, plastic products, phone case and other materials. But it can also cause trouble if it gets on things that are not intended for gluing ... The most unpleasant thing is if the glue gets on your hands or your favorite clothes

When washing off the adhesive, take into account the properties of the material on which it is located.

Skin cleaning

Do not remove superglue by literally tearing apart each other with your finger. In addition to injury, this method will not give anything. For cleaning, you can use either chemical or home remedies.

Removing superglue from hands

The first way you can remove the second glue from the skin of your hands is a scrub. Everyone knows the effect of peeling on the skin. It removes dead cells on the surface, smoothes it, makes it elastic and healthy. Due to the content of small abrasive particles, the scrub will help in removing the substance from the hands. Pick up any scrub in your hand, rub it between your fingers. Then rinse.

The American Housewives' Way of Using Peanut Butter. It contains small pieces of peanuts that act like a scrub.

Rinse cleansed skin with water, saturate and moisturize with cream.

Textile cleaning

Wash the fabric thoroughly in warm water, then rub gently. Be careful not to damage the fabric when removing super glue marks. Try to remove as much glue as possible

If the fabric is thick (no risk of damage), try to gently scrape off the stain. You can soak your fingers in the oil to make it easier to remove sticky stains.

Removing superglue from clothes

For stubborn stains, use an effective solvent that will clean the fabric without damage.

For home use, acetone-containing nail polish remover is suitable.

If nothing sucks, don't expect a new item in your wardrobe that will surely delight you.

Cleaning suede

First, try to gently scrape the glue off the suede with your fingernails. Do not damage the material. You can try wetting the stain with hot water (only the stain itself, not the surroundings!) To help soften the glue.

If all else fails, try a thinner

When working with acetone, be careful, apply it first on a hidden area to make sure there is no discoloration of the suede

Cleaning smooth hard surfaces (marble, glass, tiles)

Superglue can be easily removed from hard, smooth coatings. It will help remove adhesive from glass, marble, tiles and even a car panel (acetone can be used to remove adhesive from a car body). Rub rubbing alcohol onto the stained area until the glue dissolves. Remove the remaining parts with a cloth soaked in detergent.

You can remove the glass from the superglue with a blade, finishing the process by wiping with soapy water and polishing.

Removing super glue from wood surfaces

When cleaning superglue from furniture and other wood products, you can choose one of the following options:

Scraping with nails. If the adhesive is thin, this may help.
Acetone. This method is used mainly for cleaning lacquered surfaces. Wipe the stain with a cloth dipped in acetone. After softening, remove the residues with a rubber scraper, wash with soapy water.
Grinding. If the stain is large and the previous methods do not work, the only option is to use sandpaper. After sanding and washing the cleaned wood, polish it.

Cleaning the laminate

When removing adhesive stains from laminate flooring with cleaning agents, it is important to look at the recommendations for application on this type of flooring. Most suitable remedies:

Cif Cream. Ideal for cleaning PVC and laminate super glue.
Debonder. Able to remove the adhesive layer without damaging the surface.
Mineral oil. Dip a cloth in oil, wipe the glue drops until their edges begin to rise slightly. Then wash off the oil with a cloth soaked in warm water and soap, polish the surface.

Cleaning screens and monitors

The best way to clean the surface, phone display, or laptop screen is with Dimexide. Apply it with a cotton pad.

Cleaning of lock larvae and metal

Superglue dissolves well isopropyl alcohol.

Expert opinion
Irina Kovtun

The mentioned Dimexidum, White spirit, special cleaning agents (Anticlea, Debonder) will also help to eliminate the dried glue.

2> Suitable solvents

Since superglue will cure when exposed to moisture, standard solvents such as water, dichloroethane, or alcohol will make things worse. Therefore, to dissolve the "Moment" you need to use special means.

Compounds based on dimethyl sulfoxide have proven themselves best in everyday life.
, in particular, "Dimexid", sold without a prescription in most pharmacies.As a solvent, it acts mainly on cyanoacrylates, which means it will not damage most materials used in everyday life.

Superglues dissolve very well, including Moment, with the help of acetone and its derivatives (for example, acetonitrile). However, acetone is toxic and highly corrosive to plastics, textiles, paper and wood. In addition to pure acetone, acetone-containing mixtures can also be used, for example, ordinary nail polish remover.

Currently, special adhesive removers based on propylene carbonate have been created.
(the so-called anti-glue), for example, the Secunda trademark. There are also special anti-glues "Moment", as well as solvents based on nitromethane.

On the skin

In cases where the glue gets on the skin of the hands, it hardens quickly, since the surface of the skin is usually more humid than the environment. The most gentle way for the skin of the hands to remove the formed polymer will be the use of ordinary table salt, which must be rubbed between the hands, having previously moistened them. In no case do not use baking soda, as the highly alkaline environment, on the contrary, promotes greater polymerization of cyano cryalates.

"Dimexide" is relatively safe, but requires long-term exposure, so it is not recommended to use it on the body.
If salt does not work, you will have to use acetone-based solvents. The main thing is to wash your hands thoroughly after removing the glue, and it will be useful to subsequently apply a cream or lotion to the skin.

On clothes

Acetone and its compounds are absolutely unsuitable for removing superglue stains from fabrics. Clothes made from ordinary fabrics can be soaked for half an hour in Dimexidum dissolved in water - most of the glue spots then disappear. For delicate fabrics, anti-glue is more suitable, especially nitromethane.

Another way to remove glue stains from fabric is to freeze it in the freezer for a few minutes and then brush it off.
But it is better not to clean synthetics like that.

Gasoline can be used to clean rough fabrics. You can try to remove old stains with regular vinegar, as the acidic environment favors the monomerization of cyanoacrylates.

On plastic

Most of the solvents acting on the inherently polymeric adhesive dissolve also the inherently polymeric plastics. Therefore, the best way to remove Moment stains from plastic surfaces is to use Dimexidum.

On glass

To remove glue stains from glass, you can dilute the universal glass cleaner and apply to the stain. You can also try using white spirit. The use of "Dimexidum" can leave stubborn stains on the glass.

On the tree

If the wood has not yet been processed, it is easiest to remove the glue from it mechanically. If the surface is already prepared for use, then acetone or "Dimexide" are best suited for cleaning it.

On metal

To dissolve a spot of glue on the metal, you will have to moisten a regular cotton pad with Dimexide or acetone and attach it to the spot. After half an hour or an hour, the remaining glue is removed mechanically.

For information on how to remove glue from any surface, see the next video.

An irreplaceable assistant, helping out in many situations, firmly gluing almost any materials, superglue often brings unforeseen difficulties. Getting on the skin or mucous membranes, it causes health problems, and if it remains on clothes or objects, then the thing becomes unusable.

To remove "Super-glue" and "Moment" glue, there are special cleaners with different compositions on sale. Handy home remedies are also suitable, which are also quite effective.

It is only important to consider for which surfaces they can be used.

How to get rid of super glue on leather goods

When working with such an expensive material as genuine leather, it is advisable to know how to remove super glue from the skin.If glue gets on the product, wipe it off immediately in order to shorten the contact time, while trying not to smear it. If it did not work out immediately and the glue had time to dry, you do not need to peel it off so as not to damage the delicate surface. You can use those tools that will be at hand or that are sold in the nearest store.

Folk remedies

You cannot simply wash a highly adhesive product such as superglue. For home remedies, you can use salt or baking soda. Any of these products are mixed with water until a homogeneous mass is obtained in the form of a slurry and applied to the stain, rubbing gently. It is enough to remove the remains with a damp piece of cloth.

The stain can also be wiped off with a cotton pad dipped in lemon juice or vinegar. Here, maximum care is required so as not to damage the skin around the stain.

Chemicals

Acetone or the products that contain it will help to remove glue stains. The simplest of these is nail polish remover. It should be noted that manufacturers are increasingly offering such products without acetone or with a low content of the substance, and this can affect the result. The solvent is applied to the glue spot, kept for several minutes, and then washed off with soap and water.

Debonder with acetone - a means for removing artificial eyelashes from the eyelids - can also cope with this task. An alternative option would be refined gasoline for refueling lighters.

Exposure to warm and cold temperatures

If the glue spot is large, the affected area can be placed under running hot water. You will have to hold for at least five minutes - the glue should get wet. After that, the layer must be picked up by the edge and carefully peeled off. The obvious disadvantage of this method is that natural leather does not like water, but if it is treated with a water-repellent impregnation, the damage will be minimal.

Changes in temperature are damaging to most super glues. The stain needs to be warmed up with a hair dryer, and then put in the freezer for two hours - under the influence of low temperature, the stain will begin to crack. After that, you can try to peel off the stain. This method will not work with rubber based glue.

Solvents

Heavy solvents are almost guaranteed to damage the top layer of colored leather and will have to be further processed and repaired. It is better not to cleanse the skin with such powerful agents.

Of the available options, the pharmacy Dimexide is suitable - a drug with solvent properties. It must be applied to the damaged area and left for a few minutes: the liquid will slowly but surely dissolve the stain. This is not the fastest way, as the solvent is gentle. You may need to repeat the procedure two or more times.

Special means

Manufacturers of glue also often have in their product line a means for removing it - the so-called anti-glue (Moment, Henkel). Special active additives will clean the surface without damaging it.

We recommend:
Deodorant for shoes - how to use it correctly

Most manufacturers recommend testing its action on a small area of the product before using the anti-glue: there are times when paint or varnish is removed along with the glue.

Anticleus

Features of the composition

When did humanity start using glue? According to archaeologists, it was already used about 9.5 thousand years BC. Glue was cooked from natural materials. In the modern world, artificial additives have been used to create it. Since 1901, chemist Leo Bakeland worked on the creation of an adhesive, and already in 1909 it went on sale.

Silicate glue began production in early 1940. This stationery glue is used very often. 100 million of its packages are produced annually, their shape is constantly changing. For liquid substances, bottles with caps are used.Packing in small forms such as a pencil has become very convenient: it does not dry out, it is convenient to use, and has high adhesive characteristics.

Today it is worth talking in more detail about what a second glue is. The name "super glue" implies that it is capable of a lot. A small, compact tube can be found in any home, with its help you can make minor repairs, for example, glue a part in a children's toy, glue a cup or repair shoes.

The glue contains up to 99% of cyanoacrylates; stabilizers and plasticizers, activators and retarders are also added. Manufacturers use different combinations in the composition.

Where did the name come from and who invented the super-gluing agent for different surfaces? The substance was first developed by Harry Coover. The first composition turned out to be too sticky and was rejected. Already in 1951, American scientists found out that with the help of cyanoaclylate, any surface can be very firmly glued. In 1958, the super-substance went on sale. Super Glue immediately became very popular and made a splash.

This glue can withstand a load of 150 kg / sq. cm, more advanced means - 250 kg / sq. see Super-glue can withstand temperatures up to 80 degrees, more modified models - up to 125 degrees. It seizes very quickly: from a few seconds to a minute. But for the final setting, you should wait up to 24 hours.

In the Soviet Union, it was called "Tsiakrin", but it was almost impossible to find it in stores. Currently, the situation has changed: adhesives are present on the shelves in large quantities. Super-glue is produced under such names as "Secunda", "Monolith", "Elephant", "Super-Moment", "Power" and so on.

More recently, UV glue has gone on sale. With it, you can fix any breakdown in just 5 seconds. It is released under the brand name Lazer Bond. Liquid plastic is applied to any surface, and the bonding site is treated with an ultraviolet ray.