Facade paint "Dakryl"
Facade acrylic paint is a composition that is a suspension of lightfast pigments in a polymer binder with the inclusion of special additives. Acrylic paint for facade works serves as a protective and decorative coating for surfaces made of concrete, brick, plaster.
Acrylic-based facade paints under the DAKRIL trademark can be used for outdoor work under various temperature conditions, including at minus t °, without losing their quality properties. Acrylic facade paint is characterized by fast drying on all mineral substrates, forms a water-repellent barrier layer, thereby protecting the facade from adverse climatic phenomena: rain, hail, ice, ultraviolet radiation, etc.
Conditions for applying facade acrylic paints for outdoor use
Temperature from -15 ° C to + 30 ° C, humidity no more than 85%. The enamel is mixed, applied with a brush, roller, spray gun on a dry, non-icy, degreased surface.
Price of acrylic front paint: 145 rubles / kg.
The price of acrylic paint for facade works is indicated for basic colors and a container of 20 kg.
Consumption: 1kg. 3-5sq.m. To reduce the finish layer and increase adhesion, you can buy the Universal Primer "DAKRYL".
Technical indicators of acrylic paint for facade works "Dakryl"
You can buy acrylic facade paints without intermediaries directly, produced by LKM Torg, and get advice on the products by calling the numbers listed in Contacts or by calling the free line 8- (800) -550-40-51.
* Price may vary depending on tinting. Photos with samples of the work performed can be seen in the Photo Gallery section.
Finished coating appearance
The surface is smooth, homogeneous without delamination
According to the RAL catalog, other colors on request
Nominal viscosity according to the VZ-246 viscometer with a nozzle diameter of 4 mm. at a temperature of (20 ± 0.5) 0 С, s.
(depending on color)
Mass fraction of non-volatile substances,%, not less
Covering rate, g / m2, no more
Film adhesion, points, no more
Grinding degree, micron, no more
Drying time to degree 3 at a temperature of (20 ± 2.0) 0 С, h.
Film strength upon impact on a U-1 type device, see, not less
Resistance to static impact of water at (20.0 ± 2) ° С, hours, not less
Resistance to static impact of water at (20.0 ± 2) ° С, hours, not less
Resistance to static impact at temperature
(20 ± 2.0) 0 С h. Not less than:
3% NaCl solution
Recommendations for use
Before starting painting, the facade must be cleaned, dedusted, and dried if necessary. It is recommended to treat the surface to improve adhesion primer composition "Dacril".
Painting works are carried out with a brush, fur roller or spray gun at temperatures from -15 ° C to + 30 ° C and humidity up to 80%, in two layers. Thinning of paint with solvent is possible Orthoxylene, Nefras or R-646 up to 15% by weight. Before applying the facade enamel at negative temperatures, it must be kept for 12 hours at room temperature.
Transport and storage
Dakril facade paint for outdoor use is stored in a tightly closed container of the manufacturer, excluding exposure to sunlight and moisture. Transportation is carried out at t from -20 ° С to + 30 ° С. In case of freezing, it is recommended to keep the container with enamel in a heated room before use until the temperature of the composition reaches from + 10 ° C to + 25 ° C. During storage, the formation of a stirred sediment and a slight increase in the conditional viscosity index are allowed.
Expiration date - 12 months from the date of production.
Security measures
When using facade paint on concrete, it is necessary to comply with the requirements of work safety standards and fire safety rules. Perform work with good ventilation using personal protective equipment. Avoid inhalation and digestion.
You can ask any question you are interested in about the product or the work of the store.
Acrylic
It is the most common type of paint used for exterior concrete work. Slightly less often, acrylic compounds are used inside. Such paints are a combination of polymer and acrylic resins (as well as their copolymers) on a water basis. Often, acrylic paints are also called waterproof, so their main advantage is immediately obvious.
In addition, such compositions have good steam permeability, resistance to temperature extremes, and are environmentally friendly, therefore they are suitable for residential premises. Acrylic paints dry quickly and do not wear off. In addition, there is a huge selection of colors. The finished surface can be either glossy or matte or semi-matt.
Healthy! If you follow the application technology, then one painting will last up to 10 years.
If we talk about the cost, then on average 1 kg of the composition will cost from 200 to 400 rubles (domestic and foreign production, respectively). But the consumption of acrylic paint is relatively large - 400 g per 1 m2.
Painting technology
Concrete facades are painted deeply or superficially. The first option assumes the emergence of chemical processes, due to which the compositions are practically eaten into concrete. But the color as a result is persistent. Topcoats are used more often because they are the cheapest. The quality of the paint depends on how strong and durable the coating will be in the end. Gray is no exception.
The technology for performing work may have the following description:
- Pasting of borders with a kind of masking tape.
- They move, starting from the top, continuing to the bottom.
- The brush is dipped into the materials so that they evenly cover the tool.
- Continue staining with the same movements.
More attention is paid to the uniform distribution of material over the surface. If there are unpainted areas, then reapplication of the composition is required.
The quality of the paint depends on how strong and durable the coating will be in the end.
Top manufacturers
Among domestic and foreign finishing materials for concrete facades, eight brands differ in quality and durability.
Dulux Bindo Facade BW
Advantages and disadvantages
suitable for mineral facades, plinths;
forms a vapor-permeable coating, does not interfere with the evaporation of condensate;
protects against moisture and fungus;
superadhesive.
coating only in white.
The composition is suitable for stone, brick, withstands any climate and serves for 10 years.
I like not like
Colorex Betopaint
Acrylic paint from a Swedish manufacturer on a water basis is highly weather resistant, suitable for facades made of concrete, brick, plaster and plastered surfaces. Due to its high moisture resistance, it is used to protect walls from dampness in basements.
Advantages and disadvantages
wear resistance;
promotes the release of salt;
prevents plaster flaking;
complete drying in 36 hours;
low consumption.
• possible color mismatch of compositions from different batches.
One-component paint is diluted with water, after curing it forms a matte finish. A high degree of adhesion and strength is achieved in combination with the Betoprime primer.
Two types of white base are designed for coloring in dark and light shades.
I like not like
Sherlastic Elastomeric
The American product stands out among acrylic compounds due to its high elastic properties.The coating is intended for weather protection of monolithic, prefabricated, mixed concrete facades, as well as plaster.
Advantages and disadvantages
high flexibility and resistance to temperature drops;
suitable for surfaces with neutral and high acidity;
fills microcracks;
passes steam;
does not fade;
does not require dilution before application;
washed with soapy water.
when stained in a bright color, a second coat may be required;
long period of complete solidification.
The coating is durable and weather resistant 21 days after application.
I like not like
"Tex Profi facade"
The composition is intended for mineral substrates, applied in 1-2 layers. The coating is presented in two versions - normal and frost-resistant. "Profi" is a decorative water-acrylic paint, which is produced in the form of a white and colorless base for coloring. The surface after hardening is matte.
Advantages and disadvantages
suitable for work in high humidity conditions;
vapor permeable;
UV resistant;
protects against bacteria and mold.
dark and light colors are perceived differently near and far;
short service life - 5-7 years.
The company "Tex" has been operating for 25 years in the market of economy class paints and varnishes and is part of the Tikkurila concern.
I like not like
Euro 3 Matt
An acrylic copolymer is part of the water dispersion paint of the Finnish plant Tikkurila. The coating adheres firmly to concrete, wood and brick.
Advantages and disadvantages
dries quickly;
does not smell;
has good hiding power;
economically consumed.
not resistant to mechanical damage;
expensive;
gets dirty quickly.
The composition forms a matte finish. The white base is tinted.
I like not like
Master good
Universal rubber elastic paint suitable for exterior and interior work on concrete, metal, brick, drywall, wood and chipboard.
Advantages and disadvantages
affordable price;
walls are easy to clean;
fills cracks;
the surface is pleasant to the touch, reminiscent of rubber.
high consumption when painting OSB boards;
not suitable as a base for tiles.
When working on concrete, no flaws were found. In the bathroom, durable paint replaces the tiles on the walls.
I like not like
"NOVBYTHIM"
Advantages and disadvantages
resistant to mechanical damage and household chemicals;
does not fade.
low weather resistance.
The coating is suitable for painting warehouses and garages.
I like not like
Polybetol-Ultra
Advantages and disadvantages
one-component;
applied at a temperature of -10 degrees;
forms a shockproof coating that is resistant to oil, water and gasoline.
when applied in two layers, it is necessary to maintain an interval of 8-12 hours.
The composition can be applied to the surface without priming, but for better adhesion it is recommended to use it in combination with Polybetol-Primer primer.
I like not like
Rating summary table
Suitable Formulation Varieties
For painting concrete facades, finishing materials are used, the composition of which, to a greater or lesser extent, meets the requirements.
Acrylic
Advantages and disadvantages
environmentally friendly;
without smell;
moisture resistant.
designed for a small number of temperature cycles;
less wear-resistant;
pass steam poorly.
Acrylics are inexpensive and come in a wide variety of colors.
Silicate
Advantages and disadvantages
high adhesion to concrete;
moisture resistance;
vapor permeability;
do not fade, do not crack in the sun;
freeze quickly.
crack from blows;
the coating is not elastic.
Silicate paint is not resistant to changes in heat and cold.
Water-based
Advantages and disadvantages
low cost;
ease of use;
economical consumption;
various shades.
destroyed by moisture;
sensitive to temperature changes.
The water-based coating wears out quickly from mechanical stress and household chemicals.
Oil
Advantages and disadvantages
low price;
applied with a roller, brush or spray gun;
moisture resistant.
crack from heat and cold;
fade in the sun;
retain moisture;
smell bad.
When applied to untreated concrete, oil paint penetrates the top layer, traps condensation and encourages cracks in the walls.
Polymer-based
Polymer paints are divided into one-component ready-to-work and two-component solvent-based paints.
Advantages and disadvantages
weather resistance;
glossy surface.
the properties of the paint are fully manifested two weeks after application.
The coating hardens within two days, but is not yet ready for full use.
Lime
Advantages and disadvantages
low price;
protect against mold and mildew;
remove condensate.
low resistance to bad weather;
fast burning out in the sun.
The limescale will need to be refurbished soon.
Latex
Advantages and disadvantages
have high frost resistance and durability due to antifreeze in the composition;
do not emit toxic substances after drying;
form an elastic coating that easily expands and contracts with changes in temperature;
protect concrete from cracks.
careful preparation of the base is required;
durability is guaranteed when applied correctly.
The concrete wall is cleaned, sanded and coated with a deep penetration primer. Latex paint is applied in several thin layers.
Composition
The composition of acrylic paint includes:
- film-forming substance (binder) - the quality of the paint, its durability and strength depends on this component. It influences the adhesion to the surface and connects the rest of the coating components;
- solvent - reduces the viscosity, either water or an organic solvent is used;
- pigments - give color, are natural, synthetic, organic and inorganic. If you need to create your own shade, the pigments should be chosen from the same manufacturer as the white base paint itself. This will prevent the pigment from dissolving in the binder.
Fillers (dispersant, coalescent, defoamer and others) can also be added, which are responsible for wear resistance, moisture resistance, strength and antiseptic effect. Various organic and inorganic compounds are used to obtain persistent shades. The cost and technical characteristics of the coating depend on the availability and quantity of components in the composition.
Acrylic paint can be thinned with water until dry, and excess should be gently wiped off with a wet towel, but when finished, the finish looks like a tough, insoluble plastic film, although it seems rather thin.
The best brands of paint for concrete on the facade
Despite the visual durability and
resistance of concrete, it is based on a porous structure. To minimize
harmful impact and destruction of the building structure is necessary
use special protective coatings. They extend the service life
buildings, any concrete structures such as bridge piers, floor slabs and
etc.
Tex Profi
TexProfi belongs to
water-dispersible compositions, popular for use in structures,
in conditions of high humidity. A capacity of 9 liters is enough for 10-11 sq. m \ p, area
dries up in 1-1.5 hours.
Deep-matt paint Tex Profi is initially white, so it is easy to tint it in any shade. The composition is able to withstand daily exposure to moisture: rain, snow.
卥 牶 敲 䍨 絹 硣 桁 汯 縲 60Z
Flugger dekso 5
Facade paint for concrete Flugger Dekso 5 belongs to the thixotropic matt water-based acrylic type. It is an aesthetic and highly functional paint often used in hotels and offices.The composition of Flugger Dekso 5 is completely based on acrylic, thanks to it, even after 1 layer, it provides an exquisite appearance with full painting. The composition of paintwork materials is able to withstand daily exposure to moisture, physical exertion, and has abrasion resistance.
Euro 3 Matt (Tikkurila)
The coloring composition Euro 3 Matt is based on acrylic copolymer. If a non-absorbable base is applied to the concrete structure before processing, a container of 9 liters will be enough for 12-13 sq.m. Tikkurila material has heat-resistant properties (it can withstand up to 85 degrees). The polymer composition provides frost resistance. Any available tools can be used in application: spray gun, roller, etc.
Dufa Betoplast
Finishing paint Dufa Betoplast offered
in containers of 1 and 5 liters. Consumption is 100 ml per 1 sq.
can be applied with any tool. Often Popular not only as a finish
coating, but also for priming. The material has high adhesion and plasticity,
helps to seal the surface. Used not only for residential care
buildings, but also to ensure the insulating properties of swimming pools, garages.
It is a one-stop solution for handling
concrete facades, as a result of correct application, a beautiful
silk gloss effect.
Dufa Betoplast paint is offered in
sale in a wide range of shades, creates a protective surface on the surface
polymer layer.
Master good
Master Good paint material with high elasticity characteristics, used as a base for the next painting or as a decorative paint. It is not recommended for use on fast-abrasive surfaces. On average, the material consumption is no more than 250 g per 1 sq. M., It is recommended to apply in 2 layers.
Sherlastic Elastomeric
Sherlastic care material
Elastomeric creates a matt effect on the concrete structure. The composition has in
based on water, can be applied with the most convenient equipment, consumption is
3.9-2.6 sq. m \ n.
This is a solution for painting concrete self-leveling floors. LKM does not include in the composition
organic solvents, after processing creates a layer that protects against
mechanical stress.
Polybetol-Ultra
Facade paint Polybetol-Ultra has high moisture-repellent characteristics, after application, the surface does not react to chemical action, the layer does not chip, does not crack. In difficult atmospheric conditions, the coating demonstrates reliability and durability.
Polybetol-Ultra paintwork
applied with a thickness of at least 120 microns, capable of withstanding temperatures from -60 to
+100 degrees.
NOVBYTHIM
The paint is resistant to
shock, mechanical damage, often used not only for the walls of the house,
but also for covering structures in the garage, in warehouses.
The texture for painting concrete does not fade and even with a belt does not lose its original appearance. The paint can withstand from -40 to +40 degrees, you need to apply at least 3 layers.
Review of leading manufacturers
Russian buyers have the opportunity to choose between domestic and foreign products. Trademarks of Europe, America, Asia are popular. Products are offered by both large brands and small industries. After analyzing the market, experts have compiled a list of the most popular brands offering quality products.
Ceresite
The company produces paint for outdoor use. Compositions for plaster are in great demand. Also, the paint can be used when working on minimal substrates and for interior decoration. The products are excellent for coating acrylic and thin finishing plasters. The product has a high strength and low water absorption.
Lacre
Pay attention to the products of this brand, if you are looking for material for decorating walls from the outside of the building, balconies, loggias, facades and other similar locations. The material is great for work in rooms with high humidity
After drying, the white paint will create an even coating with a matte texture. The products boast a combination of aesthetics and technical performance.
Halo
The brand specializes in the production of paints for the decoration of surfaces made of concrete, wood, asbestos-cement or brick. Combination with plaster is also possible. The paint has excellent vapor permeability, allowing air particles to pass through. If desired, you can add color to the composition, creating the desired shade.
Dulux
Durable and durable paint. The material demonstrates a high indicator of resistance to an unstable and aggressive climate, as well as to various negative factors. In addition to painting the facade, the products are suitable for decorating the basement. Formulated to cover the exterior of a building with a mineral base.
Parade
Parade-branded paint is designed for use with a variety of materials. The composition is perfect for decorating a facade made of concrete, cement, metal, putty or brick. Experts highlight such positive qualities of the material as vapor permeability, immunity to ultraviolet rays and a self-cleaning function. The product can be safely used in aggressive and harsh conditions.
Acrylic Lux
Facade paint "Akrial Lux" is ideal for regions where the climate changes dramatically. Various weather conditions are not able to damage the painted surface due to the special components in the composition. You can use the material at any time of the year, be it a harsh winter or a hot summer. From this, its characteristics will not become worse.
VGT
The VGT company is engaged in the production of a variety of facade mixtures. After the material dries, a dense matte finish in an attractive color is formed on the surface. The composition perfectly fits on wood, brick, concrete, as well as drywall. In the VGT product catalog, everyone will find the ideal option for decorating their home.
Tikkurila
If you are going to cover a previously painted surface, it is recommended to pay attention to paint compounds from the Tikkurila company. It is an excellent choice for decorating mineral surfaces, as well as building ceramics and fiber cement.
Farbitex
Let us dwell separately on the products of the Farbitex trademark. The company occupies a leading position in the market of finishing compounds. The firm produces water-based paint for working with building facades. For decoration of brick, concrete, cement, stone, as well as foam concrete, experts recommend choosing a snow-white paint with a matte texture. The material can be used inside and outside buildings.
Features of Farbitex products:
- The components included in the composition are safe.
- The paint is odorless and fireproof.
- Absolutely non-toxic.
- High covering ability.
- Wear resistance.
- Does not smudge.
- Dries up in just a couple of hours.
- The shelf life is 2 years.
- Combines with color scheme.
- Favorable consumption: 200-250 grams per "square".
- Resistant to wet cleaning.
- Strength, reliability and durability.
- The composition contains an antiseptic.
1. What is concrete?
Before choosing a paint for a concrete facade, let's refresh our memory of what this building material is.
Concrete consists of a binder (today cement is used in this capacity), fillers (sand, crushed stone) and water. The plastic mixture is molded and solidified, resulting in a dense and strong artificial stone. The strength and other characteristics of concrete depend on the ratio of the ingredients used, as well as on the use of certain additives and plasticizers.
This building material has been used by people since time immemorial.In Ancient Mesopotapia and Ancient Rome, concrete was widely used in construction, and materials of volcanic origin played the role of cement.
The concrete facade, strong and durable, absorbs moisture well due to the porosity of the material. Moisture itself does not harm concrete; on the contrary, in a humid environment it becomes even stronger. But to protect the metal reinforcement and to prevent the spread of mold and mildew, the concrete must be protected from moisture penetration. That is why concrete facades should be painted or finished with other materials.
Outwardly, a gray concrete surface looks inexpressive, so another purpose of painting a concrete facade is to create a beautiful exterior.
What properties should paint for concrete have
- Good adhesion to the substrate - in order to adhere to the concrete surface, the paint must penetrate well into the substrate of the material. In order to improve this property, concrete is often primed before painting.
- High-quality protection against moisture - the presence of special additives in the paint that repel water. The higher this property, the better the facade paint for concrete.
- Water vapor permeability - the paint must be formulated in such a way as to release the accumulated moisture. After all, the concrete base is capable of absorbing moisture quickly and easily, therefore the tightness of the layer will lead to the accumulation of moisture between the concrete and the paint layer, destroying the layer with temperature changes. But if the paint is permeable, the moisture will simply evaporate.
- A good level of wear resistance - it directly depends on how long the paint for facade concrete works will retain its original appearance. The more resistant the dye is to various negative influences, the better.
- Resistance to sunlight - so that the paint does not fade and dry out, does not become covered with cracks, retains its color and saturation level, the evenness of the layer in the sun.
- Resistance to dirt - the paint should be easy to clean, cover the concrete surface with an even layer that does not absorb dirt and does not accumulate dust.
- Drying time - the faster the better.
- Dye consumption per square meter - given the fact that a lot of paint is needed to paint a concrete facade, a reduction in consumption will reduce costs (but not always).
- Color saturation - the more saturated the color the paint gives, the less it is consumed. The color quality of the concrete surface should be very high, since any gaps and gray bleed-through look unattractive and unaesthetic.
Facade paints
Reinforced
Facade acrylic paint
- for facades requiring frequent renovation
- high hiding power
Facade acrylic paint
- increased resistance to dirt
- resistant to intense mechanical stress
- protects the surface from mold and mildew
Facade acrylic paint
- high resistance to cracking
- hides minor defects of the base
- protects the surface from mold and mildew
Facade acrylic paint on organic solvent
- for difficult atmospheric conditions
- enhanced dirt-repellent properties
- forms a hydrophobic coating
- processing t ° up to - 20 С °
For roofs, plinths, facades
Facade white paint
- on concrete, plaster,
- putty,
- brick,
- wood,
- drywall,
- other porous materials.
Facade acrylic water-dispersion paints "Dali": purpose and scope
Facade paintwork should not only provide a beautiful appearance of the building, but also protect it from adverse environmental influences.
You can choose and purchase facade paint at an affordable price in Moscow and abroad using this catalog. All paints and varnishes presented here can be used for the following purposes:
- painting facades in difficult atmospheric conditions (frequent temperature changes, strong UV radiation, etc.);
- indoor use with a high operational load (high humidity, heavy pollution, etc.).
- putty and plaster;
- concrete;
- brick;
- drywall;
- wood;
- other porous materials.
Composition and properties of Dali dispersion facade paints
Thanks to the base of acrylic copolymers, paints and varnishes have the following properties:
- do not spread over the surface;
- have a high degree of whiteness;
- allow machine and manual tinting;
- durable (do not exfoliate or crack over time);
- have good hiding power;
- mask defects in the base;
- all-season acrylic paints for facades, the cost of which is somewhat higher, have increased resistance to difficult atmospheric conditions, they are also allowed to be applied to the surface at temperatures up to - 20 ° С;
- contain an antiseptic that protects the painted surface from rot, fungi, mold, insects and other biological damage;
- resistant to negative environmental influences (high humidity, temperature extremes, direct sunlight, etc.), while having good vapor permeability.
Having such characteristics, acrylic paints for facade works "Dali" in terms of price / quality ratio are one of the best offers on the market. An important role here is played by the high prevalence of the products of NPP "Rogneda".
Where to buy Dali facade paint?
A wide range of products of NPP "Rogneda" is presented in company stores, the addresses of which can be found in the corresponding section of the site. Here you can also choose the nearest retail outlet where you can buy facade paint in Moscow and many other cities in Russia.
Products manufactured by NPP "Rogneda" are always available from the partners of the company, located in almost all large settlements of the country. In these stores, you can buy acrylic paint for facade work at an affordable price.
Paint application technology
The surface to be painted must be cleaned and degreased. And then subject it to priming, filling and cleaning. Depending on how much the facade paint costs, what features it has and how quickly it is consumed, painting can be done with a brush, roller, or pneumatic or airless spraying. The latter method is the best suited for viscous paintwork materials, allowing you to significantly reduce their consumption.