How much tikkuril paint is consumed per square meter?

Acrylic paints

Water-based paint based on acrylic resins holds well and does not require special care, the usual cleaning will perfectly fit into the usual way. In addition, such coatings repel moisture and dirt, thereby increasing their service life. They are not afraid of ultraviolet radiation and can be performed in any shades, realizing the most daring ideas.

1PROFILUX PL-04A

This is the most profitable budget coating option with excellent quality and impressive performance. The paint adheres perfectly, evens out minor surface imperfections, does not turn yellow.

The consumption is quite economical, about 150 ml per meter. It mixes easily with the color scheme, which also has a very attractive price. The cost of 3 liters is only 150 rubles.

Pros:

• absolute safety;
• easy application;
• resistance to impacts;
• low price.

Minuses:

• may not withstand active wet cleaning;
• long drying;
• deep-mat "chalky" surface.

Prices for PROFILUX PL-04A:

2Farbitex Profi

A very economical option of domestic production in all respects. Consumption of only 90 ml per meter, the coating dries very quickly, literally within an hour.

Absolutely safe, odorless and non-flammable. A bucket with 7 kg of matte paint can be purchased for 600 rubles.

Pros:

• dries quickly;
• easy to apply;
• safe;
• is inexpensive.

Minuses:

• thick, requires dilution;
• may leave roller streaks.

Farbitex Profi prices:

3 Dali acrylic horned

Another budget product with a matte finish and tinting options.

Fireproof, has a degree of environmental protection. The coating is applied in two layers with an interval of at least an hour. Suitable for most surfaces made of bricks, plaster, plaster, including those previously painted. The cost of 2.5 liters is only about 600 rubles.

Pros:

• fits perfectly;
• has good covering ability;
• economically consumed;
• has no unpleasant odor

Minuses:

difficult to find on sale.

Prices for Rogneda Dali acrylic:

4DULUX MASTER LUX AQUA 40

Water-based paint suitable for every need. By and large, it can be used to paint any surface. It tolerates temperature extremes and humidity without damage. Does not change color even with constant contact with ultraviolet light. It has excellent covering properties and low consumption, as a rule, it is only 100 ml per square meter.

The price is considerable, about 2000 for 2.5 liters.

Pros:

• long service life;
• does not change color over time;
• has a high degree of adhesion to all types of surfaces;
• masks minor defects.

Minuses:

• quite high price for its segment;
• few packaging options.

Views

The Finnish company Tikkurila was one of the very first to use such a popular concept today as "tinting" colors. With the help of catalogs or a special program, the consumer can choose any color or tone of the coloring composition he needs.

Wall paints from this manufacturer are:

• emulsion;
• alkyd;
• silicate;
• adhesive.

To obtain ready-made emulsion compositions, water is used, and after drying it is almost not washed off with water. Emulsion dyes are divided into several types.

• Water-based materials allow surfaces to "breathe". Most often they can be found in rooms with high levels of humidity. Their minus is the intolerance of negative temperatures.
• Compositions of the water-dispersed type are slightly similar to the water-based ones. The main difference is the absence of a catchy spectrum of colors, they can be applied only at temperatures from + 6 ° C, and they are considered more water resistant.

• The main component of acrylic paint is acrylic resin.They are resistant, elastic, able to cover small damages on the walls, and are also not afraid of temperature extremes. It is highly undesirable to use this composition in damp rooms.
• Latex formulations are the most expensive because they include latex. Therefore, they have an excellent water repelling effect. They dry quickly, but gradually fade, do not hold colors well, but are considered washable.
• Silicone paint includes silicone resins as components. It is elastic, covering damage up to 2 mm. Paints of this type will be a good antiseptic, they are not afraid of dirt and retain their original texture as long as possible, and are also heat-resistant.

Glue paint includes several varieties.

• Interior casein paint. It is distinguished by its excellent appearance and increased durability. It is used for painting concrete, brick, and plastered walls.
• Dextinized formulations are made from bone glue. They are not highly resistant to moisture.
• Adhesive. They have a huge assortment of colors, are completely harmless, but they are afraid of the sun's rays and moisture.

Also in great demand is tinted graphite paint for boards in schools and for children's desks. Liitu can be purchased in traditional black or any of the darker shades of the Tikkurila color palette. The painted surface is matt graphite and can be easily written on with chalk.

The glazing antiseptic, which is part of some coloring compositions, will make it possible to qualitatively process the walls outside the building, entrance doors, fences, garden furniture and other wooden structures. Harmony deep-opaque glaze paint with a wear-resistant effect is perfect for decorative painting of walls that were previously painted with a different interior composition.

Which one to choose for outdoor and indoor work

The manufacturer's catalog is divided into several sections. Separately highlighted paints for interior decoration not only walls, but also the ceiling, floor, window and doorways, furniture. There are also products for bathrooms, saunas and metal surfaces. These are the series Harmony, Joker, Magnetic, Miranol, Remontti-Yassya.

Products for bathrooms, saunas and metal surfaces are provided.

Products for external decoration are divided into categories depending on the type of surface and the place itself. For example, balconies, window openings from the outside, garden fittings, roofing, doors. For wooden facades a series of Pesto, PekaTeha, Teha, Ultra Classic, Valtti, Vinha. For concrete - Euro Facade, Prof Facade and so on.

Products for exterior decoration are divided into categories depending on the type of surface and the place itself.

"Tikkurila Luja"

Acrylate-latex paint "Tikkurila Luya" is used for painting walls and ceilings in wet rooms, including in hospitals with a wet regime, as well as for walls and ceilings in rooms, the surfaces of which are required to be resistant to washing and wear, for example , in entrances, hospitals, etc. Contains anti-mold element.

Consumption: 5-10 sq / l

Specifications

Tikkurila Luja (Tikkurila Luya) acrylate paint

Tikkurila Luya is an acrylate paint designed to cover ceilings and walls in various wet areas. It contains an anti-mold component that perfectly protects the surface. Resistant to disinfectants and strong detergents.

Tikkurila Luya is used to cover ceilings and walls in various wet rooms, in health care facilities. Used for indoor painting of wooden, concrete, cardboard, putty, brick surfaces, fiberboard, gypsum and chipboard. This paint is used to cover the surfaces on which the alkyd paint has been applied.

Cover ceilings and walls that need constant cleaning.

• Manufacturer: Finland.
• Consumption: 5-10 m2 / l.
• Class: Premium.
• Latex.
• Semi-matt.

Tikkurila and its types

Today, Tikkurila paint is divided into four types, depending on the composition that is present in it. It:

• silicone paints and varnishes (base - silicone resin);
• acrylic paints and varnishes (base - acrylic resin);
• mineral paints and varnishes (base - slaked lime or cement);
• silicate paints and varnishes (base - aqueous solution, liquid glass and colored pigment).

Tikkurila has many advantages that distinguish it from other manufacturers. It:

• fast drying (maximum ceiling - 3-4 hours);
• paints and varnishes of the company are made according to all standards adopted by European standards organizations. This makes it environmentally friendly and does not harm the human body. That is why workers in construction stores recommend Tikkurila paint for painting walls and ceilings in children's rooms;
• lack of annoying odor (which is a huge help in the fight against competitors);
• the use of the tinting method (white or transparent paint can be tinted in absolutely any color). You can also purchase a special pigment separately;
• the process, which includes painting the walls and ceiling, is not difficult, as the application of Tikkurila paint is a very easy procedure;
• a huge selection of material (you can choose exactly what you need).

How much does it take?

Before you buy yourself paint, you need to roughly estimate how much it will be spent on this or that work. This requires:

• understand how many layers will be applied to the surface;
• remember that the matte version is consumed less than the decorative one;
• do not forget that light tones are consumed faster than dark counterparts;
• choose how the paint will be applied (after all, the use of a roller or brush implies a different consumption of material).

The consumption of tikkuril paint on average fluctuates in the region of 120-130 mg per m². If a person needs to paint a room, for example, 25 m², then he will need two cans of three liters each.

Color effect

The colors of tikkurila paint have their own unique composition. The large selection of colors is due to the fact that each person has his own taste, and everyone likes a certain color (and sometimes its shades).

Take the matte finish, for example. In most cases, this type of paint has classic, calm and muted tones. The glossy version, on the contrary, can use the entire palette of shades that can be found in special fans.

When choosing paint and varnish products, it should be borne in mind that the matte version is more intended to hide some roughness and errors on the wall, but the gloss, on the contrary, will show all the disadvantages in all its glory. Therefore, before applying glossy paint, it is necessary to clean the surface to perfect condition (as far as possible).

It is this process that allows you to find exactly what the soul likes best. And then the usual orange, yellow and other colors turn into an amazing golden or silver shade.

Financial value

Despite the fact that the price of tikkurila paint is higher than that of conventional options, you should still opt for it. By overpaying a little, a person can get a job that will pay off 100%.

The minimum warranty period is 5 years, environmental friendliness, a large selection of colors - all this and not only makes the choice in favor of tikkurila the most obvious option.

Tikkurila paint photo

We also recommend viewing:

• Adhesive paint
• Dispersion paint
• Heat resistant varnish
• Bituminous varnish
• How to remove old paint
• How to paint walls
• Rust converter
• Paint brushes
• Paint roller
• Fire retardant composition
• Impregnation
• Stain
• Wood wax
• Acrylic primer
• Yacht varnish
• Wood varnish
• Fire retardant paint
• Paint for wallpaper
• Textured paint
• Spray paint
• Floor paint
• Water paint
• Ceiling paint
• Facade paint
• Wood paint
• Antiseptic for wood
• White paint
• Liquid glass
• How to paint the ceiling
• Drying oil
• Color for paint
• Metal varnish
• Metal paint
• Epoxy paint
• Powder paint
• Water based paint
• Alkyd paint
• Tinting paint
• Painting tool
• Solvent
• Parquet varnish
• Interior paint
• Odorless paint
• Enamel paint
• Decorative paint
• Paint consumption
• Spray paint
• Wall paint
• Oil paints
• Bathroom paint

Views

The Tikkurila plant is engaged in the production of such types of wall coverings:

1. Emulsion;
2. Alkyd;
3. Silicate;
4. Sticky.

The first type is characterized by the fact that it is made using water. It also has several varieties: water-based, water-based, acrylic, polyvinyl acetate, latex and silicone.

Water-based - breathable paint. It is used in a room with a high level of humidity. Easy to apply, rinses off after a certain time. Has a wide range of colors.

Water dispersion has a modest palette, in comparison with the previous type, it is more resistant to moisture, does not tolerate temperatures below +6 degrees.

Acrylic - high strength, elastic, expensive. Easily masks cracks, does not allow air to pass through, after drying it becomes hyper-resistant to mechanical damage.

Latex paint is one of the most expensive in the Tikkurila line. Waterproof, durable and easy to clean. Dries quickly after staining, but loses color over time.

Alkyd paints are divided into enamel and oil paints. The first subgroup is based on lacquer components. They have a wide range of applications, glossy surfaces, dry in an hour or less, repel water and easily resist corrosion.

Oil paints are created with the addition of drying oil. Used for painting various surfaces, excluding walls.

Silicate paints are mineral paints because they contain water glass and alkali

When working with them, it is necessary to observe precautions: wear a protective suit, gloves and a mask

Adhesive paint types are divided into three groups:

• casein - wear-resistant, retain their color for a long time. They are used to paint concrete, plastered and brick surfaces;
• dextinated - practically have no resistance to moisture;
• adhesive - absolutely not resistant to moisture and carbon dioxide.

Among other things, I would like to highlight the special, qualitatively different from the standard types of Tikkurila paints: magnetic, graphite and polyurethane. We will discuss each separately.

Interior paint Tikkurila "Magnetic" is an original water-borne paint made with the addition of magnetic chips. It is always gray and matte. On it, like on a board, you can attach pictures, drawings, photos using small magnets, any metal little things, without making holes in the walls.

Blackboard effect paint - slate (graphite) paint Tikkurila "Liitu". Can turn any wall in a room into a canvas for an aspiring artist or writer. It differs in that it is very resistant to washing, it can withstand up to 5000 cleanings with a stiff brush. The graphite base is available in a wide variety of colors, from red to transparent and white. Like a chalk board, it allows both to show imagination on the walls of your home, and to do homework for young schoolchildren.

Tikkurila "Temadur" is a high-strength polyurethane paint that is used for painting steel, aluminum, as well as ferrous and galvanized metal structures. Possesses high anti-corrosion properties.

Peculiarities

The Tikkurila brand is over 130 years old, so we can say that the quality characteristics of the products have been tested over decades of active use.

There are several main advantages of Tikkurila varnishes:

• Complete security. When producing these paints, only environmentally friendly components are selected (wax, vegetable oil, natural pigments). When painting wall coverings, this fact is very important, since the material is most often used for work inside the house.
• This material is non-allergenic. It will provide an excellent interaction between the painted coating and the external environment. The air in the painted room remains moist and comfortable enough.
• Enviable service life. Tikkurila paints provide the best protection of wall surfaces from various natural influences: UV radiation, high humidity, seasonal temperature changes.
• Stunning brightness and zero burn-in. You will be able to familiarize yourself with a huge selection of paints in various colors, suitable for different coatings: concrete, wood, metal.
• The presence of an integrated approach when choosing materials for this brand. Choosing Tikkurila paint, you can purchase other products of this manufacturer, which will help to prepare the walls for painting with high quality.

Speaking about the shortcomings of this popular paint, only one drawback can be noted - this is a rather high price.

Peculiarities

Concern Tikkurila is not just a Finnish paint and varnish factory. This is a whole research and production institute that studies the market, researches and implements the latest developments in this area. Each product is carefully analyzed and tested by the European Commission for Standardization. This brand has been producing its own paint for over 130 years and is a pioneer in paint-related matters. Finnish manufacturers were the first to offer the buyer to create his own color using tinting (mixing two or more colors to obtain the desired shade).

The main features of Tikkurila inks are:

• Environmental friendliness. This word appears in almost every commercial today. The Finnish brand declares quite responsibly that for the manufacture of its products it uses only natural materials: wax, oil, earthy pigments of natural or mineral origin.
• Hypoallergenic. Follows from the previous point. Tikkurila paints do not lead to allergies, provide natural ventilation of the room, letting air flows through themselves, and help to remove excess moisture and maintain the necessary humidity in the room.

• Durability. One of these advantages, which today is quite rare and for a lot of money (and even then - not always). Thanks to the work of the Tikkurila Science Center, a unique paint composition has been created that allows the coating to withstand external influences: moisture, sunlight and sudden temperature changes.
• Brightness. A wide variety of shades allows you to approach the selection of paint so individually that no one else in the world may have such a color.But the main feature of Finnish paint in this sense is that it will look the same bright on wood, metal, and on the wall, since the products are made separately for each surface and do not fade in the sun.

To appreciate the products of a Finnish brand, you should carefully consider all its positive and negative aspects.

Overview of manufactured brands

Harmony creates a completely matte surface and is suitable for covering walls in a nursery, living room or bedroom. The paint evenly lays on the concrete, plaster and plastered surface. A matte shade is able to hide the imperfections of the wall.

Its composition belongs to the safe type M1, so there is no need to fear for the health of loved ones. Paint consumption for poorly absorbent surfaces - 1L per 12 sq.m, on highly absorbent - 1 liter per 7 sq.m.

The Joker paint is a popular model in the line of Tikkuril paints. It is an interior finish with a smooth, silky effect. Suitable for application on the walls of the living room, kitchen, children's rooms and corridors.

The paint belongs to hypoallergenic coatings, which confirms the "eco-label" that the brand is awarded with.

This type of paint has more than 20 thousand different shades.

When choosing a color, you need to pay attention to the marking "A" for light-colored surfaces and "C" - for darker shades .. Paint consumption for a highly absorbent surface - 1 liter per 7-9 sq. M.

For a "non-absorbent" plane - 1 liter per 10-12 sq. M.

Paint consumption for highly absorbent surfaces - 1 liter per 7-9 sq.m. For a "non-absorbent" plane - 1 liter for 10-12 sq.m.

In order to create the beauty of the walls and floor, you need to choose the paint "Euro12". It is semi-matte and suitable for frequent washing. And it is convenient in rooms with high exploitation (schools or hospitals).

In homes, it is suitable for plastered, concrete and brick surfaces. It can be used to coat a radiator for heating in a variety of colors and shades. Paint consumption: 10-11 sq. m will take 1 liter of the product. With an uneven surface - 1 liter per 5-7 sq.m.

Euro 2 is the best option for covering the ceiling space. Deep matt interior paint fits perfectly and, if necessary, is resistant to wet cleaning.

The smell from the coated surface is practically not felt. Consumption for poor absorption - 1 liter per 10 sq. m. With strong absorption - 1 liter per 3 sq.m. But, unfortunately, at the moment "Euro 2" is out of production.

For surfaces with high humidity use Euro 20 paint. It is not subject to wear and tear in bathrooms.

This paint prevents mold growth. The coating is semi-matt, with a special resistance to the release of water vapor.

It is also used in dry rooms where daily cleaning is used. The paint dries in 4 hours and can be applied even to old paintwork. Consumption on a weakly absorbent surface - 1 liter per 12 sq. M, and with a strong absorption - 1 liter per 7 sq. M.

Tikkurila paint "Euro 3" semi-matt, to create a rich color in the interior. It is used in rooms with a moderate load. Withstands daily washing. Dries quickly and is odorless.

With its help, you can create a magnificent interior using any of 20 thousand shades. Such a coating is consumed with poor absorption: 1 liter per 12 sq. m, and with strong absorption - 1 liter per 7 sq.m.

Euro 7 paint is widely used for painting walls and ceilings. It is latex with a matte effect. Fits flat on concrete, brick and fiberboard surfaces. Used to create a unique indoor environment.

With poor absorption, the consumption of such a coating will be 1 liter per 12 square meters, with abundant absorption - 1 liter per 7 square meters.

Pesto 10 matt interior enamel is used to cover wood, iron and fiberboard surfaces. Resistant to frequent cleaning of walls and ceilings. It does not have a pungent odor and is absolutely safe in composition.

This is especially important if the family has small children. The consumption of such a coating with poor absorption is 1 liter per 12 sq.

m, with abundant - 1 liter per 10 sq.m.

Euro Sealing paint is highly opaque, and is suitable for creating a matte color in white tones. This paint is suitable for rooms with low traffic and mainly for the ceiling.

Suitable for concrete, brick and fiberboard surfaces. If there are defects on the surface, Euro Sealing will easily hide them. Paint consumption with poor absorption: 1 liter per 10 sq. M, and with strong absorption - 1 liter per 3 sq. M.

Coloring with Tikkuril's Luya will not only create a matte effect, but also protect against mold and mildew. Consumption with poor absorption: 1 liter per 8 square meters, with abundant absorption - 1 liter per 5 square meters. m.

Paint "Remontti-Yassya" - acrylic, for a design approach to the ceiling and walls. Suitable for frequent wet cleaning. Environmentally friendly for humans. Consumption for painting with weak absorption: 1 liter per 12 sq. M, with a strong one - 1 liter per 7 sq. M.

Types of Tikkurila paints by bases with description and varieties

Tikkurila is not only available in a wide range of colors. It is also divided into types, based on the basis of the composition. It can be emulsion, alkyd, adhesive, silicate, latex and so on.

The paint can be emulsion, alkyd, glue, silicate, latex and so on.

Emulsion

Emulsion paint is diluted with water, in which all components are evenly distributed. After complete drying, the emulsion is difficult to wash off with water. It is harmless, economical in consumption, and has good adhesion to the surface. In addition, this species belongs to the fire-resistant and quick-drying subspecies. Emulsions do not have a pungent odor. They can be coated with other types of paints.

The emulsion is divided into subgroups:

• Acrylic;
• Silicone;
• Water-based;
• Dispenser water-based;
• Based on polyvinyl acetate;
• Latex.

1. Water-based formulations "breathe" and perfectly let in vapors. Tikkurila enamel of this group is applicable in rooms with high humidity. It retains its shade for a long time, but is not resistant to low temperatures. There are water-based compositions that create a textured surface.
2. Water-based dispenser paint has almost the same characteristics as the previous look. However, it is more resistant to moisture and is not afraid of low temperatures. Has less color range.
3. The composition of acrylic mixtures includes the resin of the same name. The high coefficient of elasticity and strength helps to mask small cracks on the surface. Resistant to low temperatures and does not hold well in rooms with high humidity. Acrylic paint is the most resistant to minor mechanical damage.

Latex paint is considered the most expensive because of its latex content. Excellent water repellency makes surfaces easy to clean on a daily basis. The budget option is glue-based paints (PVA).

The paint is harmless, economical in consumption, has good adhesion to the surface.

Alkyd

The alkyd group of paints from this manufacturer is divided into oil and enamel. The basis of oil formulations is linseed oil. They are not used for interior decoration. The enamel type has great advantages. This paint is resistant to sunlight, not afraid of moisture. It dries up within an hour, plus it has anti-corrosion properties. They can be used in any area.

This paint is resistant to sunlight, not afraid of moisture.

Silicate

Silicate paint is classified as a mineral composition due to the content of glass particles in it. Ease of operation is due to the possibility of diluting the mixture with water. Moreover, she:

• Protects the painted surface, preventing the appearance of pathogens;
• Has good steam and air permeability;
• The main advantage is resistance to temperature fluctuations.

It has a limited number of colors in its arsenal. Due to the alkali content in its composition, they work with a silicate mixture only in a mask and a protective suit.

The main advantage is resistance to temperature fluctuations.

Glue

One of the most affordable mixtures is glue paint containing particles of organic polymers. It divides casein blends, whose advantages are in persistence and excellent appearance at the end of the coloration. Dextinated paint has low moisture resistance.

Almost all glue-based paints have a large palette, but poor resistance to moisture and carbon dioxide.

Almost all glue-based paints have a large palette.