Extend the drain hose of the washing machine

Through a siphon

Installation of the connection in this way is special in that we connect the drain hose of the washing machine not to the sewer pipe or its branch, but to another plumbing element - the sink siphon. In modern siphons, manufacturers provide a special outlet for connecting a washing machine, which we should use.

The essence of connecting a washing machine through a siphon is as follows. We install the siphon and check how the water is drained through the sink drain hole, see that there are no leaks. The siphon can be easily installed by hand without any tools. If you have problems with this, you can read the article Siphon for a washing machine - installation and connection. Next, we connect the drain hose to the side outlet of the siphon, not forgetting to seal the joint. The hose must be bent with the letter "S", if this is not done, the first wash will end with the machine hovering in the middle.

Directly into the sewer pipe

You can also connect the washing machine to a nearby sewer outlet. To do this, such a diversion must be organized. We do the following.

We purchase a tee for a sewer pipe.
Using a pipe cutting device, we cut the plastic sewer pipe.
We install the tee, seal the joint.

Well, the pipe branch is organized

In this case, it is very important that the branch is located at a height of at least 40 cm from the floor level. We insert the end of the drain hose into the pipe bend and seal the connection

We strengthen the connections additionally with a clamp so that the pipe does not accidentally jump out from the pressure and flood the entire floor. Bend the hose with the letter "S" and fix it so that it does not dangle.

In conclusion, we note that it is really easy to connect the washing machine to the sewer if you follow the simplest instructions that have long been formulated by experts. You can do that too. Read this article and get started, good luck!

Hose extension methods

A washing machine drain hose extension can be created in the following two ways. Each of the methods has its own distinctive features.

The first method involves purchasing a new hose of a suitable length for the operation. In this case, you just need to replace the old tube with a new one.

At first glance, there is nothing complicated in this method, but in practice everything is completely different. The fact is that on many models of washing machines, the hose is attached from the inside.

To dismantle the element, you will have to remove the front panel. Not everyone will undertake such work. In addition, unscrewing the panel will void the seller's warranty. For this reason, experts do not recommend replacing the hose on new washing machines.

A more rational solution would be to lengthen the tube. First you need to decide on the length to which this component will be lengthened

It should be borne in mind that the hose should not be overstretched. Therefore, it is recommended to leave a small margin

Many people, in an effort to avoid tight spots, purchase extra-long hoses. Thus, they get a new problem. Excessive length puts more stress on the drain type pump. He has to expend more power to pump water through a long pipe. As a result, the part fails earlier.

Experts recommend using drain hoses that are no more than 3.5 meters long. If you cannot meet this length, then it is better to install the washing machine as close to the sewer pipe as possible.

It should be added that the drain tube must be protected from external influences. This component must be positioned so that no one can step on or accidentally damage it.

Options for organizing drainage into the sewer

There are several ways to install a washing machine with a vertical or horizontal load:

To drain water into a sink or bath is the easiest way. Even a novice master who connects the washing unit for the first time can organize this drain.
Installation of a drain to a siphon. This option is the most optimal, it is chosen most often.
The connection point for the drain of the washing machine is located directly in the sewer outlet. This method is the most difficult; connecting the drain pipe in this way is usually entrusted to the master.

In addition to the complexity of connecting the drain at a height, each method has its own advantages and disadvantages. For example, draining water into a sink or bathtub cannot be called reliable. Plumbing fixtures may not hold securely. In this case, the flood is guaranteed.

In addition, this can directly contaminate the bathtub, which will constantly need to be washed to a shine. Sometimes it smells unpleasant when draining. And if you lead the drain pipe into a siphon, then you can protect yourself from these odors.

You need to think carefully before choosing a specific point and height of the drain connection. It is better to initially spend energy and time than to do it all over again and pay for repairs to neighbors.

The overboard drain pipe option is only suitable if the washer is placed in a country house where there is no sewer system. Moreover, the hose must be placed on a special tank, from which dirty water will need to be drained after washing.

Siphon drain

Connecting the washing machine to the sewer is an important stage in its installation. In preparation for work, you should check the size of the drain hoses that are included in the kit and determine if they are enough to connect the drain of the machine to the required height. In addition, adapters are often required.

When installing the washing unit in the kitchen, the best drain option is to connect it to the sink siphon. Why it is necessary to organize a place for the washing machine near the sink.

If an existing siphon does not have an additional inlet for the machine, then you can install a new one or use a triple adapter. Better yet, buy a siphon equipped with a safety valve and a branch.

The safety valve will prevent the flow of waste water re-into the tank machines through the drain. This will avoid unpleasant odors.

The drain siphon is placed as high as possible to the sink, the optimal height is at least 400 mm. And directly the drain pipe, which comes out of the machine, is fixed at a height of 700 mm on the device body with a special clamp. So, the hose first rises in height, after which it is again lowered into the drain.

Much less space is required for the integrated drainage siphon. This equipment can be installed in the wall. Only the branch pipes go outside, where the drain is fixed at a height.

It is only necessary to make a niche in the wall in order to install the device in it. Therefore, this model is more difficult to install than an external one.

Without using a siphon

When determining the height of the drain, do not forget about the further connection. Connecting a drain directly to a sewer pipe at a height or on the floor requires some plumbing skills.

If you have doubts about the ability, then you can look at the instructions on Google. But still, in such a situation, it is advisable to seek help from a specialist.

It should also be borne in mind that the repair of the machine under warranty during violation of the installation rules is not performed. This will be at the expense of the owner of the equipment.

First, you need to make a tie-in in the sewer outlet to install the drain. It is great if the pipe is installed from metal-plastic.Difficulties may arise with iron products.

Then, when the branch is made, it is required to connect a drain pipe to it using a ring with a seal. It is necessary to clearly control the height of the inset.

The drain is fed into the sewer pipe at a height of 600 mm, and it should not come into contact with water. This will prevent harsh and unpleasant odors from developing.

The height of the drain connection affects the power of the drain pump. Therefore, the recommended parameter must be observed. If required, you can make a hole for the drain for the washing machine into the sewer in the wall.

The outlet of water from the washing machine into the sewer pipe is excellent if the sink with a siphon is located more than 2.6 m from the unit. A long drain will not help; it will additionally cause an increased load on the pumping equipment.

In the video you can see how to properly connect the drain of the washing machine to the sewer.

Drain hose extension process

Before performing manipulations to build a drain tube, you will need:

the drain tube itself, similar to the existing one;
special hose connector;
clamping clamps.

The process of lengthening the hose itself can be divided into the following stages:

Purchase of a hose similar to that installed on a particular model of the washing machine. If it is impossible to purchase an identical outlet tube, preference should be given to a product that is as close as possible in terms of functional characteristics. The main criterion is the coincidence of the diameter with the native pump.
When plugged in, the machine will need to be disconnected from the mains. After that, the connection of the native and purchased hoses is carried out by means of a special tube, the acquisition of which is possible in any hardware store or a supermarket of household appliances. The passage of the ends of this tube into both hoses must be very tight. The connecting points must be in the middle of the tube, which is clearly marked on each connecting model.
Securing the rubber hose ends with clamping clamps. This tightening must ensure tightness to prevent rupture and subsequent leakage. If there is a plastic, and not rubber, tip in the complete set of the machine, a small cut of the same hose should be inserted inside it, followed by putting a rubber tip on it. The fastening of such a connection is carried out by means of one clamp.

All fasteners must be checked before starting the machine. For reliable sealing, it will be advisable to glue the ends of the two tubes together. In addition, for safety reasons, it is not recommended to extend the hose more than 5 meters. It is necessary to limit the contact of the hoses with the surfaces of sharp objects, their twisting or kinks, leading to operational breakthroughs and rubbing, breakdowns of the washing machine due to the blocked water flow.

Inlet hose

The water supply hose connects the washing machine to the water supply pipe and serves to fill household appliances with the desired liquid.

Views

The inlet hose can be of the following type:

rubber water supply hose;

Standard inlet hose for connecting household appliances

reinforced (standard rubber hose is protected by an additional layer, which gives it additional strength). For the reinforcement of the rubber hose, alloy, nylon are used;

Stainless Steel Reinforced Water Filling Hose

rubber hose for water supply with Aquastop system. An additional tube is located in the main hose. When the hose breaks, the inner place fills with water, which activates the automatic shut-off mechanism for the water supply.

Water inlet hose with leakage protection

Inlet hoses differ in terms of service life and product cost.

The cheapest and most short-lived is the ordinary rubber hose.Most precious is the anti-leak hose.

Selection rules

How to choose a hose for connecting a water supply? When selecting, it is recommended to pay attention to the following factors:

working pressure that the hose can withstand. For apartment buildings, 20 bar products are suitable. For personal homes, this parameter is recommended to increase by%;
Maximum temperature. It is better to select hoses designed for temperatures of 90 degrees or more. Conventional hoses are manufactured with a safety margin and are able to withstand temperatures in ºС;
hose length.
When determining the parameter, it is important to take into account the distance between household appliances and the water pipe. The hose must not be connected with tension or excessive kinks. Pulling or kinking will reduce the life of the product.

Connection diagram

How to connect the hose to the washing machine? You need to act according to the following scheme:

a tap is made into the water pipe. At the place of the tie-in, a tee and a separate valve are installed for local shutting off the water supply;
the straight end of the faucet is connected to the tee. The union nut, installed on the hose, is armed with a rubber gasket, but an FUM tape can be used for additional sealing of the threaded connection;

Connecting the water inlet hose and water pipe

At the junction of the inlet hose with the water pipe, experts advise to additionally install a filter that will protect household appliances from small particles of debris contained in the water.

the curved end of the hose is connected to the corresponding inlet of the washing machine. When buying, the hole for the hose is protected by a plug, which is removed specifically before installation;

Hose connection to household appliance inlet

the operability and density of the filling system of household appliances is checked.

Hose overview

Hoses from the manufacturer TSG are Italian-made gray accessories designed for a working pressure of 5 bar. They are sold in different lengths, which is reflected in the price. Basic sizes: 1m, 1.5m, 2m, 2.5m, 3m, 3.5m, 4m, 5m. The price varies from 90 to 235 rubles. All such hoses have an inner diameter of 19 x 22 mm.

TuboFlex hoses - hoses from a Russian manufacturer, designed for a working pressure of 2 bar. They are made of polypropylene in different lengths from 1 to 5 meters. The manufacturer recommends brands such as Candy, Beko, LG, Indesit, Atlant for washing machines. The approximate price for an accessory 3.5 m long is 190 rubles.

Hose from Helfer - a hose for a washing machine made in Russia. It has a working pressure of 10 bar, which is very impressive, it can withstand temperatures up to 60C. fittings have a standard diameter of 19 mm. The price for a 3.5 m part is about 350 rubles.

Hose extension

Washing machine manufacturers generally do not recommend extending the drain hose. But what to do if the sewer outlet is far from the machine or it is not brought out separately, and the standard length of 1.2 meters is very small. In this case, either completely change the drain hose, or add the desired length.

The first option is safer, because additional joints on the hose are the risks of water leaks. When choosing the length of the hose, keep in mind that it cannot be pulled on, so leave a small margin.

An adapter is required to connect two hoses. This is a plastic tube that is inserted into the ends of the drain hose and secured with clamps 16x27 mm

It is important not only to properly extend the hose, but to connect it correctly, you can read about this in the article How to connect the drain hose of the washing machine to the sewer

As you can see, the size of the drain hose is standard in most cases, especially with regard to the diameter.If your washing machine has one of the fittings that does not have a standard diameter, then you will have to order the original hose from the manufacturer or add the length. You can handle this completely on your own.

GOOD line (Z)

Photo

Specifications

Installing a washing machine drain

Most often, a washing machine is installed in the kitchen or in the bathroom, from a practical point of view, this is the most purposeful. In these places, the closest are the engineering communications necessary for the operation of the machine and, especially since there is a flat concrete floor, traditionally tiled with tiles, which does not give vibrations during the operation of the machine in the spin mode.

To connect the machine to communications, first of all, you need to study the manufacturer's annotation. In the overwhelming majority of cases, the connection of various models of washing machines is carried out according to the general principle.

Washer drain devices can be carried out in 3 main methods. The most common method is to install a drain hose on the edge of the tub or sink and drain the waste water there. This option is provided by almost all manufacturers of washing machines; a special plastic clip is included in the kit, which allows you to give the end of the drain hose a comfortable shape for fixing it to the edge of the plumbing fixture.

According to the advice of the annotation, the end of the drain hose of the machine should be at a height of about half a meter from the surface on which the machine itself is installed, thus, a sag of the drain hose appears and, as a result, a water seal, which is a reliable protector against the penetration of odors and unsafe bacteria from the sewer.

For the most reliable drain operation, it is recommended to install a special sink or sink siphon, with a branch for connecting the drain hose. To do this, in some cases, you have to take a fresh one and change an old siphon that does not have an additional input for hoses from a washing machine or dishwasher.

In options where the length of the drain hose is not enough, it can be extended to a certain length, according to the advice of the annotation.

Instructions

How to connect a washing machine to the sewer

Washer;

water pipes;

instruments;

drain hose

Instructions

1 Before starting work, it is imperative that you familiarize yourself with the annotation, which carefully describes the height of the outlet pipe for your washing machine.

Indeed, for each model of this type of household appliance, its own height, certain. This condition is especially important when connecting the drain hose and the drain. In some cases, you have to resort to installing an additional siphon. How the machine will be connected to the sewer pipe depends on which type of water drainage you want to choose.

2 If you choose a method in which waste water is combined into either a bathtub or a toilet.

then this is a fairly common option. Here you just need to fix the drain hose to the side of the bathroom or the wall of the toilet. But, despite the apparent simplicity, this method makes a lot of problems. So, for example, you cannot use the bathroom while the wash is in progress, so all the waste water will be connected there. And going to the toilet will not be very convenient, due to the fact that from the 1st side the lid will rise to the height of the hose circumference. Also, with this mounting method, it is quite easy to remove the hose. And if you forget about this fact, you can easily arrange a flood.

Therefore, the reliability of fastening is the main parameter that must be inspected with this method of connecting to sewer networks.

4 In order for the hose to correctly connect the machine and the sewer, one side of it must be fixed at a height of cm along the back wall of the machine. The second end should go into a special siphon, which is needed so that the waste water from the sewer does not get into the machine.If you do not have a siphon, and you do not have the desire to take fresh, then you can simply bend the drain hose in the form of a coil, which will also be able to completely fight perfectly with the ingress of already spoiled water into your machine.

Basic connection methods

You can connect the drain of the washing machine to the sewer according to different schemes, each of which has its own advantages and disadvantages. Among the main options, they usually indicate the flow of water after washing through:

the edge of a washbasin, bathtub or toilet;
a nozzle with a branch, which is mounted above the siphon;
siphon with a provided outlet;
tie-in to the sewer.

The method should be chosen based on the position of the washing machine in the room.

Draining into a bathtub, sink or toilet

This option is the simplest and most economical - it requires a minimum set of tools. In addition, consumables are not required here, since everything you need is included in the washing machine.

When draining over the edge of the sink or toilet bowl, the hose bent for this purpose simply clings to the edge of the plumbing, and at the end of the wash it is suspended in the place of permanent attachment. The downside of this method is the threat of a runoff disruption with flooding of the room and possibly the neighbors below.

A properly organized rim drain is safer. The procedure is simple and consists of the following sequence of actions:

Drill a hole for the cork above the bathtub so that the end of the tube is in the bathtub when suspended.
Screw a self-tapping screw into this hole.
Disconnect the corrugated hose equipped with a plastic bracket with a hole for fastening from the rear wall of the machine and hang it on the self-tapping screw.

Such fastening excludes breakdown as a result of careless actions or vibration of the washing machine. However, the disadvantages still remain:

do not wash during washing;
waste water contaminates the surface of the bath, spoils the coating;
the bathroom must be cleaned after each wash.

Drain through tee

With this connection, a special nozzle with a branch is installed under the sink. For this:

Disconnect the drain pipe that comes from the sink.
Place the tee as high as possible, preferably under the sink hole, to prevent backflow of water.
Put the equipment back in place.
Connect the extension hose to the nipple.
Tighten the joints with clamps.

To prevent damage to the connections, the tubes must be secured so that they do not restrict free movement.

Siphon with non-return valve

If you correctly connect such a system to the sewage system, then it will prevent the appearance of extraneous odors and the penetration of drains due to the built-in check valve. The costs will be slightly higher, but they are justified.

The connection process is similar to the previous one, but with slight differences:

Instead of a tee, a new siphon is installed and a hose must be put on its outlet.
When inserted into the branch pipe, the connection is fixed with a sealing sleeve, which is usually included in the kit or purchased separately.
The insertion point can be sealed with a sealant for better protection against sewer odors.

Drainage through a tie-in pipe

If there is an additional branch in the pipe, you will have to do some work to install it, which will require a pipe cutter. After completing this most laborious stage, you must:

Twist the drain or extension hose with an S to compensate for the absence of a check valve.
Put the coupling on the lower end of the hose so that its tip protrudes no more than 5 cm.
Insert the tube with the coupling into the bend.

A properly equipped waste water drain will ensure a high-quality wash and save you unnecessary hassle. Always check your steps with the instructions that came with your washing machine.

Simple attachment to the water supply

Typically, the installation of a washer requires a water supply at a distance close to it.The water supply network is laid using metal or plastic pipes with a diameter of 15 mm.

There are three main ways of installing equipment in a water supply system:

Use of metal or plastic pipes and couplings.
With the help of cranes.
Using a fitting for metal-plastic pipes.

In the first case, a crimp sleeve is required, which consists of two halves, tightened with four screws. The faucet is screwed on when there is a rubber gasket just under the side where the hole is. After a convenient location for coupling the coupling, it is determined that it is necessary to connect the inlet of the machine to the pipe using a ferrule, which should compress the cold water pipe.

The technology for installing couplings involves the following actions when blocking the flow of cold water into an apartment:

Preliminary cleaning of pipes from dirt with cold water.
Tight full clamping of the four clutch screws.
Drill a hole in the pipe through the sleeve using an 8-10mm electric drill.
Thread the ball valve into the faucet thread-sealed sleeve.

Replacing an element with an analog

It is not difficult to change the hose in the washing machine if there is a minimum set of tools and a general understanding of the unit's device, but it is better to entrust this operation to specialists, especially if the machine is under warranty. In order to get to the pump nozzle, it is necessary to dismantle at least one of the unit walls.

There are several cases that require the complete removal of the drain hose:

Replacing a failed washing machine pump;
Damage to the drain tube or blockage that cannot be removed without dismantling it;
Installation of a new hose of suitable length in order to connect the drain to the sewer without using an adapter.

After performing these operations, the standard sleeve can be replaced with a telescopic version, or with tubes sold in a bay. The device of the telescopic version allows, if necessary, to increase their length by almost three times. When buying pipes in the bay, it is possible to buy a plot of a certain length, since in the bay the hose is divided into modules of 0.5 m each.

If the standard sleeve is out of order, then it is better to simply replace it with a new one of the same length. In retail outlets, you can find a standard version ranging from 1.5 to 5 meters. With regard to telescopic options, with a certain ease of connection, the tube has a high tendency to blockages. When buying a sleeve for the meter, the length should also not be abused.

There are many nuances and even problems here. The fact is that access to the pump is different for each model of the washing machine.

In order to change the drain hose, you need:

For models of the brand "Samsung", "Ardo", LG, "Ariston" and "Indesit", get access to the bottom of the unit (tilt or even put the unit down). Then unscrew the bottom cover together with the drain filter and put it aside. After that, remove the old hose and install a new one.
For "Electrolux" and "Zanussi" you will need to remove the back wall by unscrewing the top cover.
For Siemens, AEG and Bosch models, the front cover must be removed. To access it, remove the detergent dispenser and loosen the clamp to remove the cuff. After unscrewing the bolts, it is necessary to slightly raise the front panel and pull it towards you. After that, access to the desired item will be opened.
Remove the side panel on all top-loading machines.

Be sure to read:

How to clean a powder tray in a washing machine: the best ways to remove fossilized residues

Unfortunately, the maximum tubing length may not meet your expectations. If you need to lengthen the drain hose of the washing machine by several meters, then it is better to resort to the second method.