How to patch up chips on chipboard furniture: the best ways

Tips for repairing damage and preventing them

Repair of the countertop is carried out as carefully as possible so that the restoration site does not stand out from the rest of the surface.

A few tips will help with this:

When choosing how to cover the chipboard countertop, pay attention to the rest of the kitchen design. If the facades are glossy, choose a glossy varnish

For quieter kitchens, a matte lacquer is more suitable. If it was not possible to choose a coloring composition that ideally matches the color to the countertop, then tint varnish will help to hide the differences between the problem area and the rest of the surface. To prevent delamination of the work surface, immediately after purchase, cover its ends with silicone compound and plastic strips. Additionally, the entire surface is varnished.

Quite a popular material used for the manufacture of kitchen furniture, which does not swell or soak. However, mechanical stress on plastic furniture often leads to the formation of cracks or chips, especially in the kitchen.

If minor flaws appear on the table - cuts, scratches, then you can do without expensive glue, for these purposes you can also use ordinary instant glue.

If a large piece has broken off, then it is best to use Titan glue. The plastic is ground to a powder state, mixed with an adhesive, and the damaged surface is sealed with this mixture.

There are many techniques for removing scratches from furniture. Unseemly defects can be removed from almost any surface. The main thing is to take into account the peculiarities of the material, to choose the right shade of the product.

Experts advise against experimenting if the furniture is expensive. In this case, only specialists will help.

By considering how to remove scratches from furniture and choosing the appropriate option, you can restore the aesthetic appearance of various surfaces.

The most basic defects that appear during the operation of laminated chipboard furniture are scratches, chips, loosening, deformation, edge flaking, torn hinges and fallen off facades. The reasons for their occurrence can be very different:

chips, scratches, flaking of the edge - caused by careless transportation, improper operation, factory defect;
loosening - frequent disassembly, improper operation, factory defect;
fallen off facades, torn or creaking hinges - poor fixation of fasteners, improper installation, heavy weight of the door, frequent opening (closing).

Chipped on the end part of the chipboard countertop

Furniture made of laminated chipboard can be restored in several ways, namely:

Restoration of the color of the worn-out laminated surface.
Masking scratches and chips.
Applying a new edge.
Restoration of fasteners and hinges landing sites.

Replacing the melamine edging

Additional ways to fix scratches

Unsightly cracks in polished furniture, if not deep enough, can be removed with hot steam. To perform the procedure, you need to wet the gauze folded in several layers, attach it to the shabby place and walk over it with a hot iron. If an iron with a steamer is available, its steam can be used without applying a cloth. But this method is not always safe for furniture. Before processing visible parts, it is advisable to try this technique on an inconspicuous area.

In the case of dark wood, sometimes it helps to cover the scratches with honey of a suitable color. It is applied in several layers until the desired effect is achieved.On the surface of light wood, you can mask imperfections with an ordinary walnut, crushed to a mushy state, rubbing it into the coating. The pulp and butter of the walnut are good at masking various damage. These techniques are considered the most suitable for self-disposal of scratches that often cover polished furniture used in all kinds of rooms.

Features of repair of agglomerate countertops

The situation is more complicated with the agglomerate countertop. A fairly expensive agglomerate countertop is very durable and almost not subject to scratches and chips, since it is 90% marble or quartz, and this is its main advantage. But if in some unthinkable way you managed to beat off a corner on it or make a chip, then it is easier and cheaper to replace it with a new acrylic one than to repair it.

Most often, defects on products made of quartz agglomerate are chips that can appear when heavy or sharp objects hit the surface or the end of the product. Further in the article, we will consider the elimination of just such defects.

For restoration, special restoration materials are used.

With a slight chipping (less than 1 mm), it is expanded so that the adhesive has the ability to connect to the structure of the stone after drying.

The adhesive is made on the basis of polyester resin, with the addition of quartz dust and coloring pigment. After drying, the remnants of the glue are removed with a blade, and then the treated area of the surface is wiped with alcohol.

Major damage

If you need an expensive repair of Italian furniture, correction of significant damage to the surface or complex breakdowns of mechanisms, you will have to contact a special company that repairs furniture at home.

Some serious defects affecting the operational properties of furniture can be corrected on their own; local repairs will not cause difficulties for a neat person. Constant changes in temperature and air humidity inherent in every working kitchen cause cracks, table legs become unusable over time. The repair should be done as soon as possible before the deformation becomes very noticeable:

In a medical syringe, ordinary PVA glue is collected, for better penetration of the substance, the needle is removed;
Putting the needle on a full syringe, carefully fill the crack with glue;
The part is tightly pressed with a clamp, the glue residues protruding from the crack are removed;
After a day, the clamp is removed and the repaired part of the furniture is varnished. This will extend the life of the furniture and protect it from further damage.

We collect glue in a syringe

Fill cracks with glue

Clamping the crack

We cover with varnish

Repair of minor injuries

Usually, such a type of work as the restoration of an artificial countertop, implies its initial inspection by a master, followed by procedures for restoring the countertop.

Repair of artificial stone countertops is carried out both on the spot, in case the damage is small, and with removal to the production facility, if significant intervention is required.

When shallow scratches or spots appear on the surface that cannot be removed, a sander with a fine abrasive wheel will help. Problems such as stains from various chemical detergents and hot burns to the surface, as well as minor scratches, can be removed with your own hands.

Hot pot burn stain removed by sanding

To do this, you need a polyester compound designed specifically for this. Scratches can be sanded, first with medium, and then with the finest emery cloth. Then it should be polished. Very gently, slowly and carefully with a soft felt cloth, until the original appearance is restored.

In this case, restorers use a grinding machine with a felt attachment.But when doing repairs with your own hands, it is better to use a felt cloth. You need to be careful if the countertop is made of acrylic with a small coating of artificial stone. In this case, no surface grinding is performed.

In order to regain its original strength and beauty, the work must be carried out by qualified personnel. Otherwise, self-intervention in the repair of a surface made of quartz agglomerate may lead in the future to an increase in the cost of restoration work or to the purchase of a new countertop. Restoring and repairing an artificial countertop is a rather laborious process.

Photo of furniture repair

We also recommend viewing:

Mixer repair
Ceiling repair
Repair of plastic windows
Repair in Khrushchev
Renovation ideas
Floor repair
Good renovation
Modern apartment renovation, home and office
Beautiful renovation
Repair of a two-room apartment
Renovation of offices
Where to start repairs
Renovation in the nursery
Bathroom renovation
Kitchen renovation
Hallway renovation
Corridor renovation
DIY balcony repair
DIY bedroom repair
Renovation in a new building
Toilet repair
Redecorating
Cleaning after renovation
Turnkey apartment renovation

Please repost

How to remove scratches and dents from furniture

For these purposes, there are both professional and folk methods. The latter have an important nuance - before using them on a visible surface, you need to test the method on an inconspicuous area, so as not to create even more problems.

Furniture touch

Used to mask small scratches. It is a tube that is closed with a lid with a brush, like a nail polish. It is applied in one or several layers until the defect is completely eliminated. The excess is removed with the edge of the plastic card, and the surface itself is polished with felt or a soft cloth. It is difficult to find the perfect color, so you can add the missing texture with an ordinary felt-tip pen and cover it with furniture varnish. For this purpose, it is better to use a spray varnish. It is applied evenly and does not leave a visible edge to the application.

Furniture wax

Can be soft and hard. The first has much more colors, and it is easier to apply. But solid is more reliable in further operation. It can be used for large dents or even chips. Soft furniture wax can be easily heated with your fingers and applied with excess to the problem area. The excess can be easily removed with a plastic spatula. Then the surface is sanded and varnished with a compound with an appropriate degree of gloss.

Acrylate / acrylic putty

Option that is more suitable for deep dents. The putty is applied with a rubber or plastic spatula to the surface of the furniture, and after complete drying, it is sanded first with the finest sandpaper-zero, and then with felt. If the color does not match, the stain can be tinted with a marker or felt-tip pen, but it is better to take the composition a tone darker, because the light spot will stand out strongly against the general background.

Stain

It is a versatile compound for removing shallow scratches. The stain penetrates into the structure of the wood, painting it in the desired tone, but retains the texture of the wood, in contrast to paints and enamels, which give a solid dense color. The stain must first be tested on an inconspicuous area of furniture, because the shade may not match the one you want to see in the end. Take the time to do this so that the final result will completely satisfy you.

Walnut

This folk method is used when there are shallow scratches. The problem area is carefully processed with a half of a nut, and then polished with a soft cloth to remove the oily sheen. Pecan nuts are also used for this.It should be clarified that this method will not help in the presence of deep irregularities, it only makes invisible small scratches that do not go deep into the structure. In addition, craftsmen suggest using a weak iodine solution for dark wood species. It will also help paint over micro-scratches. But remember that this masking will not flatten the surface, but will simply visually hide the flaw.

Full painting of tiles

An alternative way to update the bathroom without removing the old tile is to paint it all over. In addition, this is considered a budget repair option.

To achieve an excellent result, pay attention to two important aspects:

Surface preparation.
The choice of quality paint.

For all procedures, you will need a primer, sandpaper, roller and paint. The direct painting process can be divided into the following stages:

Cleaning of tiles.
Degreasing. To do this, wipe the lined area with acetone, alcohol or vinegar.
Removing the top glossy layer with sandpaper.
Surface priming. At this stage, you will have to wait about a day until the mixture is completely dry.
Re-sanding with sandpaper.
Only after all the preparatory work, you can finally paint the tiles.
One layer is not enough, so after 12 hours check if the paint is dry and repeat the application.

Special means

You can get rid of defects in a matter of minutes with specialized furniture compositions. Some of them have a rather high price, but in stores you can always find a suitable option for the cost.

Stain

It is a material in the form of a liquid or emulsion that is applied to wood to give it a specific color. Means of this type are very relevant for eliminating various abrasions of small depth, especially those that affect only the surface layer of varnish.

Staining wooden countertops

It is advisable to apply the stain on the entire countertop, door, otherwise the treated area will stand out strongly. First, paint an inconspicuous area of the furniture to make sure the color matches. After that, you can soak the product completely, and as it dries, polish it.

Regular liquid paint

Old furniture that has a lot of scuffs should be completely painted. To do this, you can purchase alkyd or acrylic paint of your favorite color. After thorough sanding and degreasing, the surface is painted and dried, then covered with a finishing varnish on wood.

Painting old furniture

Oil polish

If there was a layer of polymer composition on top of the furniture, for example, polyurethane, it will be possible to cover up the scratches with a special oil polish. First, the area with the defect is cleaned to smoothness with fine-grain sandpaper, dipped in mineral oil, and then covered with polish. It forms a smooth, shiny surface, carefully filling cracks.

Watco polish for wood surfaces

Mastic

Another compound with which the restoration of scratches is carried out quickly and reliably. Mastic restores gloss on damaged substrates, repairs mechanical defects: chips, cracks, animal claw marks. The tool can be bought ready-made or made by yourself:

Melt 40 g of beeswax in a water bath.
Add 30 g of turpentine.
Combine the mass with 10 g of alcohol.
Mix everything, remove from the stove.
Treat furniture with a warm composition using a rag.

DIY ingredients for making mastic

This mastic is especially suitable for removing white spots and scuffs that have formed on products made of natural wood or MDF.

Pencil

Wax crayons help hide furniture scratches in one stroke.They are sold in all hardware stores, have a variety of shades in the color of the tree, so choosing the right tool will not be difficult. The damaged surface must be wiped off dust, dried, and then carefully rubbed with a pencil.

Anti-scratch wax crayons of various shades

Some formulations require preliminary melting, which can be done with a water bath or a regular household hair dryer. The device is directed at a pencil, from which the wax will flow directly onto the defect. After drying, the furniture is carefully polished with a dry cloth.

Hatch

A line for the restoration of chips is considered a professional tool and looks like a clerical proofreader. It is used to cover up shallow seams, remove tears, scratches, scuffs. A composition of this type is easily applied to furniture or the floor, quickly sets, resistant to moisture, temperature extremes. The stroke does not leave marks and remains resistant to abrasion for a long time. It is applied to the defect after cleaning the surface, and as it dries, the furniture is varnished.

Furniture stroke Master City

Wood wax

The wax can be used for the restoration of bulky items, and not just for repairing minor scratches. Such compositions are implemented in two forms:

Soft. Easy to use, easily rubbed into the problem area in a circular motion. After 15 minutes, unabsorbed excess wax is removed with a rag. This wax is well suited for laminated substrates and natural woods.
Solid. They are professional products, melt before application. As the base is lubricated, it is polished with rubbing the composition into the damaged areas.

Hard waxes for furniture restoration

Marker

Some brands of furniture paint (for example, MinWax) are available in the form of markers. It is very easy to apply them. It is enough just to hold over the scratch, and then wait for the composition to dry, which occurs literally in a minute. To give shine after painting the defect, use a wood polish.

Scratch Marker Minwax

How to remove scuffs from furniture

Soft furniture wax

The appropriate shade of wax is applied to a soft woolen or felt cloth and gently rubbed into the surface in a circular motion. If you are not sure if you have chosen the correct shade, start with the lightest one that you think is suitable for the restoration. As it absorbs and dries, the problem area can be darkened with wax of a more saturated shade. To do this, wait about twelve hours, then the wax will definitely take its final color.

Furniture felt-tip pen

Sold in almost all major supermarkets for construction and renovation. The hardest part of this is finding the right shade. If the abrasion is large in area or the scratch passes through the fibers, then you need to purchase two felt-tip pens, one tone darker than the other. With the second, darker one, we will simulate the texture of the wood after the first has dried. Light is applied using a napkin, painted with a marker. If the paint from the fabric does not fit on the furniture, then the napkin can be moistened with cologne or vodka, but just a little. The finishing touch will be varnishing with a glossy or matt varnish, depending on the overall texture.

Wax

Wax crayons for removing scratches on furniture

This is a professional tool. Specialty wax can be found in some furniture stores and hardware supermarkets.

Special wax for masking scratches on polished furniture, which is sold in stores and comes in different types

The wax is versatile. It can be applied to any surface: laminated, wooden, lacquered, etc.

The wax is applied to a soft woolen or felt cloth and gently rubbed into the surface in a circular motion

The wax is sold in two different varieties:

Soft. Easy to use.Such wax just needs to be rubbed into the desired place. Severe damage requires a lot of material. It is easier to apply wax on wooden furniture with large cracks with a knife or a construction trowel. Wait fifteen minutes before removing the excess.
Solid. This is an expensive, effective remedy. It is not worth using it without certain skills. The hard wax must be melted, applied to scratches with a thick layer, and the damaged area must be sanded.

Super hard wax for the restoration of furniture surfaces that are in constant use

Apply an excess of melted wax to the damaged area, cool, remove excess, grind the repair area

How to use wax to remove scratches from furniture

In the case of deep injuries, the situation can be corrected by using a soft wax, a special marker or one of the types of wax crayons. Damage of medium size can be easily puttied with such means. The imperfections will almost completely disappear, while the surface will become even and not causing complaints from the point of view of aesthetics.

The process of polishing the furniture covering from scratches is carried out as follows:

If necessary, the required place is smoothed with sandpaper, dirt is removed from it.
The surface is reliably degreased.
A special putty is applied to the place, preferably the same color as the furniture intended for working with wood or other material from which the product is made.
The putty must dry.
The coating needs to be treated with fine sandpaper or other sandpaper. For this purpose, zero is best suited.
In the event that the putty is significantly different in color from wood, you can treat the surface with a stain, and then let it dry.
The surface is covered with a transparent priming varnish for natural wood, if the furniture is wooden.

Chips

For kitchen facades, it is advisable to use furniture repair wax. The substance will help fix chips and cracks on the surface. For easy application, use wax crayons. Repair instructions with wax:

Selection of the required color. To repair chipboard furniture, purchase a wax crayon of a suitable shade in specialized stores. If the store does not have the desired color, then mix the adjacent shades. To do this, you will have to take shavings from two pencils, mix and melt in a metal bowl. When choosing proportions, achieve the desired shade. After that, minor furniture repairs will not cause difficulties;
To repair chipboard furniture with your own hands, you need to clean the surface. This is done with sandpaper and a blade to gently cut away loose pieces;
When applying a pencil to furniture, you will have to melt it, but not with an open flame. The beeswax, which is part of the composition, is to blame, the pencil will simply light up. A heated metal object is used for melting. A knife is perfect for this. It is heated over a flame and the pencil is melted, after which they continue to repair the veneer on the furniture;
A chip or crack with a slight excess is filled with molten wax;
After the composition has dried, its excess is removed with a blade;
Wait until the mixture is completely dry and polish the surface;
Polished surfaces are varnished to secure repairs and extend the life of the furniture.

The repair is easy enough, but the repaired chipboard furniture must still be protected from further damage. To prevent them, cover the furniture during repairs with plastic foil and secure it with tape. This prevents stains and dust from penetrating the surface of the furniture.

Apply wax

Removing excess wax

We polish the coating

How to remove cracks and other damage to furniture

Small cracks (up to 2 mm) can be filled with epoxy resin and heated with a hairdryer both the surface and the glue. Resin hardening time is 4-6 hours.

Since it is not at all difficult to remove cracks in small furniture, we will focus on deep damage. If there are very deep cracks in the furniture frame, then they require filling with epoxy glue in two or three steps and sanding after two to three weeks.

Filling large depressions and crevices requires filling. Finding the right color putty is not easy. Using a water-based wood putty, you can tint it with acrylic paints to achieve the desired color.

Small dents can be straightened using the old method based on the water-swelling property of wood. Apply a drop of water to the dent that has been removed from the coatings and steam lightly with the tip of the iron.

Chiseled furniture legs are often shabby, damaged by time and water. For restoration it is necessary to wrap the damaged leg with insulating tape as restraints and fill it with epoxy resin.

And how to remove chips on furniture, spending a minimum of your time on it? Epoxylin-mini is a modern plastic epoxy composition that can be polished and painted after curing, it is suitable for restoring small lost fragments, for example, a broken corner, a chipped edge, and so on.

A white circle appears on the polished surface of the furniture because a hot object has been placed on top of it. You can try to remove it with alcohol or alcohol with vegetable oil. Rub it with a clean woolen cloth in a circular motion until the stain disappears

Try removing greasy, oily stains from the surface with a 10% solution of soda ash, applying it with a brush, brush or rag. One hour after treatment, neutralize the surface with 5% hydrochloric acid solution

Refreshing dull polish

In the process of use, polished furniture fronts lose their former luster. Stains and scratches appear on them, so the furniture becomes dull. There are two ways to update a polished surface:

Furniture restoration in a specialized workshop. Masters perform two types of work: restoration of damaged areas and subsequent polishing. This time-consuming restorative procedure cannot be performed on your own without the necessary skills and experience. Specialists remove the top layer of varnish, remove all irregularities and dirt, and only then proceed to polishing. To renovate the surface, the workshops use a special varnish and sanding paper. The final stage is polishing with wax or polishing paste.
DIY polishing. This procedure must be carried out regularly so that the furniture does not lose its luster. To do this, you will need to purchase special tools that polish furniture at home. Apply a little polish to the surface and rub thoroughly with a flannel napkin. If for some reason you cannot get a special product, you can use linseed oil or white wax.

Polishing is the easiest and most affordable way to update your furniture with your own hands. Constant care and respect will allow you to significantly extend the service life of polished products.

Deep cracks

The most important thing here is not to leave the crack empty. In this case, it is best to adhere to certain rules:

The crack must be protected from dust and dirt.
Fill the damaged area with wood filler.
In the event that the surface is covered with paint, varnish, it must be cleaned with sandpaper.
You can use wood stain to add the desired shade.

When the apartment has very expensive or maybe exclusive furniture, you should contact the professionals. They will help you fix all defects without side effects.

PVA glue

Acetate adhesive, which contains natural substances, copes well with sealing cracks on fiber boards. To do this, they are filled with a syringe and injected with a needle deep into the cleavage. You need to apply the glue carefully and strictly to the crack so that no bumps form. After that, the part is tightened with clamps and waited for complete drying.

Oddly enough, this fatty egg sauce can work wonders. Of course, if the crack is not through. Mayonnaise is applied carefully and only on the crack itself, without affecting the adjacent areas, otherwise then you will also have to get rid of greasy stains. The composition remains in the problem area overnight, and the excess is polished with a soft cloth. If necessary, the remaining scratch or unevenness is masked with furniture wax or other suitable material.

Whichever method you choose from the above, remember that it is better to first try it on an inconspicuous area, for example, on the inside of a countertop or drawer. So you will definitely save your family budget from additional expenses, and yourself from unnecessary hassle and running around in search of new camouflage means.

When wiping dust from wooden furniture, it is difficult not to notice cracks, scratches, abrasions. All these are integral time companions that appear in the process of using furniture. Even small errors on the surface are clearly visible. They spoil the ideal look of the lacquered product and leave an unpleasant residue.

Scratches and chips on wooden furniture or doors are a common problem encountered in almost every home.

You can treat furniture with a mixture of vinegar and olive oil, using it as a polish, and then wipe it dry.

Wood stain can help, which is the best way to remove furniture scratches.

If minor damage is easy enough to remove at home, then masking deep flaws requires the use of only professional tools. In particular, putties. Puttying will allow you to achieve a uniform, clean, even coating.

Putty is made in two stages - first, the main chip is sealed, and after drying, a finishing layer is applied, with a slight surplus

Site preparation

Before starting work, you need to thoroughly clean the surface of the furniture from dust and dirt. Cover the cleaned area with a degreaser and allow to dry. Also, at the preparation stage, you need to decide what material will be used to hide defects.

Apply the material

The purchased material is applied with a suitable tool or cotton pad to the damaged area. When applying, care should be taken to ensure uniformity. Excess material is carefully removed with a spatula.

Painting

On top of the applied camouflage material, a layer of paint is applied, which matches the color of the rest of the furniture. The paint not only visually hides defects, but also provides additional protection against new damage.

Restoration of a wooden surface without polishing

Even with the most careful handling of pieces of furniture, chips or scratches can appear on the surfaces. Restoration will help get rid of them. The easiest way to restore shine to wood furnishings is to treat it with a compound containing orange oil. This is easy to do with your own hands: apply water on a clean sponge, warm it up in the microwave for half a minute. Then, using a spray bottle, spray the composition on the surface of the cabinet or table, then go over them with a warm sponge. Gloves should be worn to protect your hands.

If there is a large stain, special tools and devices will be required: a touch-up marker, wax, denatured alcohol. For restoration, the surface is cleaned with soapy water and dried.The next step is to wipe the lightened areas of wooden furniture with alcohol, most often this helps to restore the original color. In case of deep damage, scratches and spots are painted over with a marker, wax is applied to give shine.

In case of chips, you will have to use a putty. It is best to purchase a light variety and supplement it with a color scheme to obtain a shade that best matches the color of the surface.

Procedure:

Cover the chip with the composition, capturing the area located nearby.
Wait until dry.
Sand with sandpaper.

How to restore veneer

Veneered furniture requires a special approach. The means are basically the same, the methods are different. For example, if the veneer is swollen after being hit, add PVA glue into a disposable syringe, pierce the bubble, and inject glue into the cavity. Put a piece of thick fabric on top and place the load. If the surface is uneven (convex or concave), use a bag of dense fabric with heated sand as a load.

Such damage to the veneer is restored in two stages. First, the swelling is eliminated, then the scratch is painted over and the coating is restored

If the veneer is glued with alcohol glue, the swollen part can be returned to its place by ironing it through a rag with a hot iron. But do not overheat the iron: the veneer can stretch. The degree of heating is medium.

If ironing through a dry cloth does not work, try repeating the operation with a damp cloth (wet it and wring it out well). There is a chance that the wood will swell and become more elastic. For reliable fixation of the bulge, you can insert PVA there, and then heat it with an iron.

If the bulge is cracked, you can also try to seal it with heating (through a rag). If it doesn't work, tear off the peeled piece. Do not cut, but break off: on the veneer, fractures after restoration are less noticeable than cuts. Therefore, you break off the lagging piece. From the place of damage and a piece of veneer, clean off the old glue (with sandpaper or a nail file - depending on the size). Further, the repair of the veneer on the furniture is standard: they smeared it with PVA glue, laid it down, aligning the fracture lines, laid a thick cloth on top and put the load to dry.

Such veneer flaking can most likely be eliminated simply by ironing it with an iron.

Scratches and traces of restoration on veneer are removed in the same way as on wood: they are painted over with a furniture marker of a suitable shade. If the scratch is deep, a little melted furniture wax is applied to it (with a spatula). After drying, the wax is ground, if necessary, using fine-grain sandpaper, but after such processing, the restored piece is covered with a layer of varnish.

Do-it-yourself furniture restoration requires patience and accuracy. We have to act gradually and methodically: smeared, wait for drying, leveled, smeared again, etc. Sometimes you have to try several methods: the damage is different, as are the materials used in the manufacture (glue, varnishes, etc.). But the furniture will look much better as a result.

How to remove scratches?

A special furniture marker can help mask chips and scratches.

No matter how careful the care is, scratches on furniture cannot be avoided during long-term use. Bedside tables, wardrobes, sideboards are damaged by household items, wiped. Such damage significantly spoils the appearance of the products, deteriorating the interior of the entire room.

Paraffin wax from ordinary candles is perfect for removing and masking defects in light furniture.

It is difficult to avoid the appearance of nicks. But there are real ways to help get rid of them in a matter of minutes. All these methods can be divided into two groups: professional and folk. In the table, we will consider the pros and cons of each of them.

For small white scratches on furniture, raw walnuts can be used.