How to increase slime at home if it has decreased

Prophylaxis

There are many reasons why the slime breaks and does not stretch, but the main one is improper storage and expiration date. A spoiled slime can be altered or added to help improve its properties. But it is better to initially follow the storage rules so that the toy does not fail longer.

How to store slime so it doesn't dry out

To prevent the slime from drying out, it is necessary to properly store the slime.

The toy must be in a sealed container.
Do not leave the slime outdoors for a long time.
Playing too long can dry out.
It is recommended to periodically clean the antistress from dust and dirt, for which an antibacterial hand gel is used.

It is recommended to store the slime so that it does not dry out in a dark place where direct sunlight does not fall.

Adding a thickener

If the slime becomes hard, it should be softened, for which various means are used. For prevention, it is necessary to periodically add a few drops of a thickener to the mass. After that, the mass is thoroughly mixed for 5-10 minutes.

What can not be "fed"

Components such as starch and flour should not be added to the slime, as they impair the properties of the toy. In addition, these substances contribute to the development of pathogenic microflora on the "hand gum". To prevent the appearance of bacteria and microorganisms, it is recommended to periodically add 2-3 drops of an antiseptic to the slime.

How to feed properly

Like a pet, a pet is fed from mucus. The procedure is carried out daily, for example, at night

It is important not to "overfeed" the slime - so it can lose its properties

Water

They feed the slime with water, soften the hardened mass and increase the size of the toy. For regular daily feeding, just add a few drops of liquid. In this case, the slime can be placed in a separate jar - "dining room" or dripped with water directly into an airtight container where the toy is stored permanently. After feeding, the box with the toy is placed in the refrigerator.

Salt

Only a few grains of salt need to be added per day. They are poured onto the surface of a toy lying in a jar, after which the slime is left untouched for a while.

Eraser

"Delicacy" is given to slime occasionally, it is not used for daily feeding. In order to add an eraser to the mass, the latter needs to be crushed. You can grate it or chop it finely with a knife. The grains will not dissolve in the slime, they will remain visible even after a while, so if you want to avoid this, do not add an eraser.

Using varnish remover

To make the slime stretch and crunch, you need to add a varnish remover to it. The mixture contains components such as:

isopropyl alcohol;
acetone;
glycols.

The tool is used to soften the hardened varnish, since the substances included in it contribute to a decrease in the density of the composition. Therefore, it is also suitable so that the slime does not break, it becomes soft and stretchy. To use varnish remover you need:

Place the slime in a clean dish.
Add half a teaspoon of the wash and 3 tablespoons of any toothpaste, except for whitening, to the container.
The mass is gently kneaded for 5-10 minutes.
Hand gum is removed from the container when it returns to its original characteristics.

This method helps to restore the condition so that the slime stretches. However, a bench wash is not completely safe for humans. Therefore, after each use of the "gum", you must thoroughly wash your hands. The procedure itself is performed in a well-ventilated area.

How to feed slime

Both home and store slime misses if you forget about it, and starves if you don't feed it.Both of these points lead to spoilage. But if you feed him 1-2 times a week, the slime will remain alive, healthy and large.

Your pet's cooking preferences may seem odd. But the menu is always available at home.

Water. It can be poured into a container with slime, sealed and left in the refrigerator overnight. But you can speed up the process by placing the gum in warm water for 15 minutes, then knead, if necessary, drop the activator and knead again.
Salt. A few grains are enough. After adding them to the container to the mass, close and shake vigorously several times. Then take the dough in your hands and knead it.
Eraser. This delicacy should not be used often. The eraser crushed on a grater is poured into a container with a slime, shaken, and then picked up and kneaded.

Slime is a capricious toy that can wither away from unpredictable actions or inaction. But if it is stored correctly, fed and treated with home remedies on time, then the owner will not have to think about how to make a big slime out of a small slime, but will only have to enjoy the toy.

All ways to change store slime at home

When the slime is hard, you can't really play with it. This problem can be easily solved in several ways:

You need to add a small pinch of citric acid to the toy.
Place the antistress in a container, add a couple of teaspoons of water and microwave for half a minute. After heating, knead the slime well in your hands. If it sticks, add a thickener, and if not soft enough, repeat the process with heating.
Mix a little bit of toothpaste and a teaspoon of shampoo, liquid soap or shower gel into the antistress.
Apply a couple of drops of antibacterial hand gel to the toy and stir. Then add more if needed. The softening rate of the slime depends on the brand of gel, but everyone works.
Hand cream (5 g) and half a tablespoon of sunflower, corn or other vegetable oil (preferably refined) add to the antistress. This will make it soft, but will not stretch too much.

If the toy smells terrible, soak it in water at room temperature for 15-20 minutes and leave it next to an open window for 7-10 minutes. Then, when most of the unpleasant smell has disappeared, you can add a couple of drops of essential oil.

When slime sticks to your hands, playing with it becomes unpleasant. To stop sticking, it can be placed in the freezer for 5 minutes. You can also add starch, but only in combination with glue. Or use sodium tetroborate; it can be diluted with water (one bottle of tetraborate for two glasses of water). Boric acid, lens fluid, or any other activator can be used.

Often in stores they sell small toys that cannot be pulled and wrinkled normally. Their volume needs to be made larger. To do this, you will need to mix 3-7 (depending on size) tablespoons of foam or shaving gel in the antistress. Kinetic sand also increases the size of the slime. The additives will make it prettier and also slightly larger.

In store anti-stress, after the change, the color becomes dull. In order to make the toy brighter or to change its shade, use dyes. The most budget-friendly way to color slime is iodine and brilliant green, which are likely to be found in every home.

Video

Method 7: glue

You can make a freshly made slime softer by adding a working glue:

The tough mass should be chopped into pieces and placed in a cup.
Then a little glue is poured into this dish, literally 1-2 tsp.
The composition must be mixed by hand until smooth.

When choosing this method, the slime can be first heated in the microwave or in a water bath. When it opens, it will be much easier to mix the mass with glue. Just warming up the slime will make it more elastic only before it cools down.And then the toy will become rigid again, because its composition has not changed, and there is still a lot of activator in it.

We recommend reading about how to store and care for your slime. From the article you will learn about the correct storage temperature of slime, feeding methods, treatment of diseases, periodic washing.

And here is more about how to increase the size of the slime at home.

It is possible to fix the situation with the damaged slime if you added a lot of activator. But this is an extra effort and a waste of time. So it is better to add the thickener in moderation and knead the slime well at each stage of production.

Check out this video for ways to soften your slime:

Where to store slime

Slime is more liquid than slime, but they have similar storage conditions. An airtight container and a cool place are required.

In addition, if you pour a couple of teaspoons of water into a jar of slime and leave it in the refrigerator overnight, it will absorb water and increase in size.

Some ideas for storing anti-stress:

Cream jar. As a rule, such a jar is screwed tightly, ensuring tightness. Wash it off the remains of the cream with warm water and soap, then wipe dry with a paper towel.
Processed cheese container. The plastic box also closes tightly, and there is enough space on the lid to draw something beautiful on it or indicate information about the "inhabitant".
A can of coffee. A tin can works well for storing large, homemade slimes or slimes. The main thing is to make sure that there are no small grains of coffee left inside that can contaminate the anti-stress.

Boxing with slimes

Jars of medicines. Screw-top plastic jars are also very handy. For liquid slime, you can also use a glass bottle with a wide mouth.
Zip package. An airtight bag is the most compact anti-stress container, but not very durable. Not suitable for permanent wearing in a pocket or backpack. You can also use a plastic bag from coffee or cocoa, it is opaque, but it will not tear even under the weight of books or groceries in a backpack.

How to make a box for slime

If you can't find a suitable container at hand, you can do it yourself. Use a juice or milk bag as material. Inside such a bag there is a layer of foil that prevents the cardboard from absorbing moisture.

Choose a bag that is the right size for your slime. Rinse it thoroughly with warm water to remove any remaining contents.
Mark the estimated height of the future box with a felt-tip pen. Using a ruler, draw a line on the front, back, and one of the sides of the bag.
Step back from the drawn line up about 10 cm and draw a line on the second side wall.
Use a utility knife to cut the bag along the lines. You should have a box with one of the walls about 10 cm higher than the rest.
Fold up the high wall so that it serves as a lid for the box. Cut off excess if required.
To keep the lid well, you can glue a small magnet to it, and glue something metallic to the box where it touches the lid. You can also use Velcro, or just tie the box with twine.
Your box is ready! Decorate it to your liking with self-adhesive, colored paper, stickers, etc., and you can "populate" the slime.

Box for storing slimes from milk packaging

What to do if the slime is dry

To restore all the original properties of the toy, you need to choose the right product. For a slime from a jar and for a ninja slime, sometimes the same methods are not suitable.

Water

Any kind of slime can be softened with water. If the slime has hardened, it must be placed in a container, pour in some water at room temperature and knead thoroughly. Water will help increase the mass in size. Water is poured into the container and immersed in antistress for 16 minutes.Stir the composition with a wooden stick and add a thickener to restore ductility and elasticity.

Antibacterial gel

The gel is suitable for any kind of slime. The tool is used not only when the mass has hardened. It is advisable to apply the antibacterial composition regularly, since the surface of the slime accumulates many pathogenic microorganisms. The use of the gel for disinfection involves the addition of 4 drops. When you need to soften the mass, it is enough to pour two drops onto the surface of the slime. Then carefully knead the mass with your fingers.

Hand lotion

This tool is not suitable for jelly slime. In all other cases, the lotion will help to cope with the problem that has arisen:

Homemade or purchased slime is rolled out and made into a cake.
A small amount of lotion is evenly distributed over the entire surface and left.
After 7 minutes, the slime is picked up and actively kneaded. If the mass has not hardened too much, the waiting time is reduced to 1-2 minutes.

Hand cream

It is better to use the cream if the slime has a dense structure. Hands generously smear the selected cream, take a slime and actively begin to knead it until it becomes soft enough.

Lemon acid

Citric acid will help give any kind of slime the desired consistency. A small pinch of citric acid is poured onto the surface of the slime, and then thoroughly kneaded.

Glycerol

Glycerin will help restore the shape and consistency of any type of anti-stress. The component is sold at any pharmacy at a low price. A few drops of glycerin are added to the container and mixed. Then the slime is taken in hand to knead the mass.

Toothpaste

It will be possible to return the softness to the slime with the help of toothpaste. A small pea is squeezed onto the mass and mixed. The paste can change the structure of the slime, so it is preliminarily recommended to try the product on a small piece.

Microwave

The microwave oven will help to restore the original appearance to the dried slime:

antistress is transferred to a deep container;
pour in 7 ml of water;
the container is placed in the microwave and the heating mode is turned on for 9 seconds;
allow the slime to cool, then begin to stir;
if the slime has become sticky and overly liquid, you need to add a thickener.

How to increase ninja slime?

If you are deciding how to increase the ninja slime at home, determine the properties of the toy. Focusing on them, select the elements added to the slime. In transparent slime, insert silicate glue instead of PVA or soak it. Increase the matte slime by adding PVA or plasticine.

Ways to increase ninja slime:

Maceration. If the slime is dry and shrinking, try increasing it by soaking and stretching. Pour half a glass of water into a container and dip the slime. Knead the toy thoroughly by stretching it to the sides for 3 minutes. Repeat the process by placing the product in water for 30 seconds and knead. The procedure will have to be performed 3-4 times. When the slime is saturated with water, it has grown, but it sticks to the hands. Correct the situation by spreading out the toy and sprinkling a couple of teaspoons of fine salt into it. Roll the slime into an envelope and knead. When the salt has absorbed the water, it will stop sticking. Another way to soak is to hold the slime under running water. When the slime is saturated with liquid, repeat the procedure with the salt envelope.
Salt solution. When deciding how to make your ninja slime bigger, try a saline solution. It is injected into the product using a syringe. The procedure increases the slime, restores elasticity. The process is divided into 2 stages. At the first stage, the toy is soaked. Pour 2 cups of water into a bowl and add 3 pinches of salt to it. Stir to dissolve the salt. Dip the slime in the saline solution for 5 minutes. Take out the toy and knead. If it sticks to your hands, sprinkle with salt. At the second stage, a saline solution is injected into the product with a syringe. Dissolve 0.5 tsp in 20 ml of water. salt.Draw liquid into a syringe with a needle and inject into the slime. Repeat the procedure 3-4 times until the slime is the desired size.
Kinetic sand. Adding fine kinetic sand to a slime is a great way to make a ninja slime large. Unlike river sand, it has small particles and does not crumble in the hands. Enlarging the toy is easy. Spread it out and pour 1 tsp in the middle. sand. Knead the slime in your hands so that the sand is evenly distributed over the product. Continue the process until you get the desired volume and consistency of the slime. The finished product stretches well.
PVA glue. Since shop slime consists of polymers, it is increased by adding PVA glue (it is also a type of polymers). Put the slime in a zip bag and pour in PVA glue. Knead the slime until the glue is absorbed into the toy. Add glue if necessary and knead for 5 minutes. Continue the process until the slime has reached the desired volume.
Shaving gel or foam. Shaving foam or gel is good for increasing the volume of the slime. The difference between the components is that the gel sticks less to the hands, but the foam has a better effect on the size of the slime. Spread the toy out and squeeze the gel or foam onto it. Knead in your hands: the slime begins to foam and increases in volume. If the product continues to stick, add an activator (sodium tetraborate or boric acid).
Shaving foam with starch. These elements make the toy more elastic and softer. Do not overdo it with starch, otherwise you will get the opposite effect. Put the toy in a zip bag, add 1-2 tsp. starch and close the bag. Knead the slime so that the starch is completely absorbed. Squeeze some shaving foam into the bag, continue kneading for a few minutes to expand the slime. Take the toy out of the bag, check if it sticks to your hands. If this happens, add sodium tetraborate.
Hand or body cream. The main problem with ninja slimes is the rapid loss of elasticity. When looking for a way to increase the ninja slime, choose a product that makes the slime softer. Hand or body creams are ideal for this purpose. Spread the product on a flat surface and put 1 tsp in it. cream. Wrap the toy in an envelope and knead it with your hands. Add the required amount of cream as needed.
Detergents. Shampoo, shower gel are suitable for increasing slime. To make the slime bigger, put it in a container and add 1-2 tsp. thick shampoo or gel. Stir well with a spatula or spoon. If the toy sticks to your hands, add sodium tetraborate. Another activator is also suitable - salt, soda or sugar.

What is Ninja Slime?

Ninja Slime is a trade brand by which products are recognizable in toy stores. The packaging of the product resembles a rounded cone with a lid at the bottom. Ninja elements are drawn on the package: a blindfold, slanted eyes and others.

The contents of the package resemble a regular slime. But fillers and flavors are added to it. The buyer chooses a slime with the smell of chocolate, strawberries and other sweets. Among the fillers are beads, balls, small toys.

If the slime is played for a long time, it will decrease in size. Warmth, dryness contribute to the evaporation of moisture contained in the slime. To increase it, you will have to moisturize or add viscous ingredients.

Purchased slime is made from polymers. At home, they are replaced by glue, plasticine. Cosmetic and detergents help to increase the size of the slime: shampoo, shower or wash gel, body or hand cream. Saline, water is also used to grow slime.

Important! The choice of funds depends on the consistency of the toy, substances available in the house, slime fillers.