Mirror slime super recipe • pearlescent slime without dye

From office glue

For this recipe, choose a thick glue and do not use too much activator. The dye in the form of a tablet can be pre-crushed so that it dissolves faster in the slime base.

Chameleon Ingredients

• 60 ml of stationery glue,
• 0.5 tablets of paints for Easter eggs "Chameleon" with multi-effect,
• 1 tube of pearlescent liquid dye from the same set
• 3-4 drops of sodium tetraborate.

How to do it yourself

1. Pour the glue into a bowl, you can shake it a little.
2. Immediately add a tablet from the Chameleon egg paint set.
3. The components must be mixed for the color to appear.
4. The next step is to add liquid dye from a tube of the same set.
5. After mixing, you need to thicken the composition with sodium tetraborate.
6. Work in the liquid with a spatula until the mass stabilizes.
7. Next, the toy is kneaded by hand.

How to make a slime that changes color from office glue and egg paint:

Pearl Slime Recipes

Let's get down to practice. There is nothing left to prepare: a container that you will not use later for storing food, a spatula or stick for the initial kneading, silicone gloves for bringing the slime to the desired thickness. Theoretically, you can do without gloves: with a probability of 99.99%, after a single kneading of the slime, nothing bad will happen to you. But it would be better to play it safe and protect your hands from irritation that some activators can cause. Especially if you are a keen slimer and regularly undertake to create another toy.

Slime made of transparent glue without mother-of-pearl

In this case, glitter and dye are not needed. But you have to be patient, because a real pearl slime stands for at least 5 days.

How to make pearl slime without pigment:

Pour 50 ml of clear glue into a container.
Add 1 tbsp. l. water and stir.
Cover the contents of the bowl with plenty of shaving foam. Some claim that a good slime will take a whole can, although for the first sample, you can limit yourself to a smaller volume.
Stir the foam and glue until they combine to form a homogeneous substance that resembles heavy whipped cream.
Add some activator, such as sodium tetraborate, to the bowl and continue stirring the slime to come.
Noticing that the mass began to easily lag behind the walls of the container, take it in your hands and continue to knead with your fingers. Is the glue still sticking? This means that he did not have enough activator. Add a drop or two.
When the white fluffy mass begins to resemble a real slime, put it in a box with a tight-fitting lid and put it in a secluded place for 5 days

It is important to keep the toy away from sunlight and radiators all this time.
After 5 days, you will find that the slime has fallen out and shrank in size. No wonder, just air bubbles came out of it, some of which remained on the surface of the slime in the form of a film

Carefully removing it, you will see that the slime has acquired an interesting pearl shade and shine.

Often, after a long standing, the toy starts to stick to the hands again and becomes more liquid. Fixing this is easy, just add a little activator and knead the slime again in your hands.

Note! If you want to give your slime an interesting hue, look in your art supplies for clear dye.

Slime with film mask and pigment

You can't spoil porridge with butter, and pearl slime with shine. Do you think so too? Then buy a box of pearl pigment in hobby products, and a mask in a cosmetic store.All this will cost you a maximum of 150 rubles.

How to make a slime from a film mask:

1. Squeeze the contents of the mask into a suitable bowl.
2. Add a spoonful of pigment.
3. Pour in some activator, tetraborate or boric acid, and stir until the liquid mask base thickens. If this does not happen for a long time, re-add the activator, but do not overdo it, so as not to get a pearlescent handgum.
4. Wrinkle the thickened slime with your hands until it becomes soft, lush and iridescent.
5. You can play them right away.

Note! In addition to pearl pigment, gold, silver and bronze look good in this slime.

Triple Cologne Recipe

The cologne contains ethyl alcohol, which acts as an activator for the glue. Slime with it turns out to be slightly tight, does not stretch too well and clicks poorly. But at the same time it shines, shimmers and is quite capable of captivating you for a long time.

How to make a cologne slime:

1. Pour 50 ml of stationery glue into a bowl.
2. Add 0.5 tbsp. l. triple cologne and start stirring both liquids.
3. The slime will begin to thicken. Continue to knead it first in a bowl and then with your hands, adding a little more cologne if necessary.
4. Squeeze the finished slime to remove excess liquid.

Instead of cologne, which has a too strong smell, you can use perfume or eau de toilette, but the cost of such a craft will increase significantly.

How to make pearl slime - watch the video:

Learning to knead pearlescent anti-stress toys is easy. Go over the recipes from the article, watch the video of how pearl slimes are made, and you will see for yourself. Which slime will be your first pearlescent masterpiece? With pigment? With cologne? With sequins?

Without tetraborate

After adding the activator, the glue must be mixed slowly so that the slime comes out transparent. In this case, less dye will be needed, and the mass will be well pigmented and changing shades. More chameleon powder would be needed for a dense white slime.

What to make a slime that changes color

• 60 ml of clear glue,
• 30 ml of water,
• 1 tsp baking soda,
• 1 tbsp. l. contact lens solution,
• 0.5 tsp chameleon paints.

Cooking method

1. In one bowl, mix the glue and water until the liquid is homogeneous.
2. Soda is placed in another dish.
3. It must be poured with lens solution, everything must be mixed thoroughly.
4. The resulting soda activator is poured into a mixture of glue and water.
5. It is necessary to stir it before curdling.
6. A color-changing paint is added to the slime.
7. Now you need to knead it so that the pigment is evenly distributed.

With washing gel

As an activator in this recipe, you can use not only Perwoll, but also any other washing gel. If not, mix 100 ml of hot water and 4-5 tbsp. l. washing powder. The activator is poured in portions, not sparing time to knead the base of the toy.

How to make

1. The glue needs to be handled as it is transferred into the cup.
2. The second component is a thermochromic pigment.
3. The composition is mixed well so that the powder is not visible, and the color is saturated.
4. It's time to use a thickener - Pervol washing gel.
5. The mass is kneaded for some time with a spoon.
6. When it can be taken in hand, the future slime is kneaded like dough.

We recommend reading about how to make a glowing slime. From this article, you will learn how to make neon slime using PVA glue, glow sticks, starch, lens fluid, and sodium tetraborate.

And here is more about how to make a space slime.

Slime chameleon is no more difficult than, for example, the original. This is essentially the classic version of slime, but with the addition of a color-changing ingredient. If you have the appropriate paint, do not be afraid to experiment, everything will definitely work out.

Be sure to watch the video on how to make a fire slime that changes its color:

Features of making pearl slimes

As a rule, homemade slimes are prepared from two types of glue - PVA and clerical (silicate). Set aside the PVA immediately, it gives the toy a milky white hue, which is not needed in this case. Your choice is transparent glue.

Another suitable base for pearlescent slime would be a film mask.

It is important that it is transparent and contains polyvinyl alcohol, which reacts with the activator and allows you to achieve the desired density of the toy. If the mask is lightly colored, it doesn't matter

It's just that the toy will eventually acquire the same light shade.

It is better to take pharmacy borax, tetraborate and boric acid as a thickener. They are guaranteed not to interfere with the transparency of the slime.

Note! Whether to add glitter, mother-of-pearl and coloring pigment to a toy depends solely on your desire. If not, the slime will do just fine without these ingredients.

Tips & Tricks

Unfortunately, slime, like any other toy, can lose its properties. Usually, the condition of the slime deteriorates due to improper care or natural wear. It is possible to return the toy to its normal state if you follow these recommendations (recommendations are given for each specific case):

1. The slime is too watery. The reason is the excessive amount of fluid. Place 2 grains of salt in a container of slime and shake it. The salt will absorb excess water. Remove the grains of salt and leave the slime in the container for a couple of days.
2. The toy has hardened. The reason here is either too much salt or too much use of the toy. Pour a few drops of water on the slime and leave for 3.5 hours in a dark place where the sun's rays do not penetrate.
3. The slime has become too sticky. Stickiness can be caused by both high humidity and elevated storage temperatures. Add a drop of thickener to the slime and refrigerate for 3-4 hours. If the toy is still sticky, remember it for 2-3 minutes.

v class = 'code-block code-block-11' style = 'margin: 8px 0; clear: both; '>