How to make snow slime

Making ice slime

The easiest way to make slime at home is with ice.

To prepare a toy you will need:

• mixing container;
• cold water (half a cup);
• ice cubes (5 cubes);
• baking soda (2 teaspoons);
• transparent office glue;
• mixing stick or spoon;
• plate.

Cooking method:

1. Pour water into a plate (preferably a deep one), add all the ice and soda there, mix thoroughly and leave until the ice is completely dissolved.
2. We are waiting for all the ice to melt in the water, after which we pour the office glue into the center of the bowl with a thin stream.
3. Using a spoon or stick, gently move the glue mass.
4. We take out the mass with our hands and continue to stir it for 1-2 minutes, after which we put it in a container and place it in the refrigerator for infusion.

The finished hendgum has a transparent consistency. The only drawback of the toy is that in the hands it melts too quickly and acquires a liquid consistency.

Soda Slime Recipes

Soda acts as the main ingredient in many slime recipes. Below we will look at a recipe for how to make the simplest slime at home from soda without complex and scarce ingredients.

We need:

• 100 ml of water;
• 50 ml of stationery transparent glue or PVA glue;
• 15 grams of baking soda.

Cooking method:

1. Prepare a thickener in a separate container. To do this, thoroughly dissolve the specified amount of soda in water.
2. Pour all the glue into another container. If you want to get a colored slime, add dye to the glue.
3. Gradually pour the thickener into the glue mass and mix everything thoroughly until the mixture becomes homogeneous.

If you are making a slime for a child, you can involve them in the mixing process. During the game, be careful that the baby does not eat the toy.

The best recipes for cloud slime without snow

To make a slime, follow the dosage and procedure exactly. But it is not always possible to indicate a certain amount of thickener: it varies depending on the quality of the remaining components and the nature of mixing the composition. Further popular working recipes for cloud slime without snow.

Slime with light plasticine

The recipe for how to make cloud slime without snow uses airy plasticine. It creates the basis for the future toy. Due to its light texture, plasticine provides volume and elasticity to the product. You will also need shaving foam or shampoo to make the slime stretch well. They thicken the mixture, thanks to them the slime is stretched into a film. Add kinetic sand if desired. Its particles are very small, they form a fine structure of the slime.

Ingredients:

• a bag of air plasticine;
• kinetic sand (the volume depends on the selected amount of plasticine);
• 1-2 tbsp. l. shaving foam.

Preparation method:

1. Knead the clay well in your hands so that it stretches and becomes soft.
2. Add a little kinetic sand. The finished mass is stretched, drizzling, but not thick.
3. Form a cake from the resulting composition and cover it with a layer of shaving foam.
4. Knead the slime with your hands until the foam is completely absorbed and the slime is elastic and airy.

When deciding how to make cloud slime without artificial snow, stock up on fresh ingredients. Stuck plasticine becomes hard, it is difficult to knead it. But if there is no other material at hand, add some hot water to the toy and mash: boiling water will help return the plasticine to its former softness.

Slime with hydrogel

Baby diaper filler is a great recipe for making cloud slime without snow. This substance, mixed with cotton wool and synthetic fibers inside the diaper, resembles artificial snow and perfectly replaces it.To get the hydrogel, open the diaper and remove the contents. You will also need PVA or silicate glue, tetraborate and shaving foam.

Ingredients:

• a bottle of PVA glue;
• hydrogel from one small diaper;
• 1 tbsp. l. shaving foam and liquid soap;
• sodium tetraborate.

Preparation method:

1. Squeeze the glue into a container.
2. Remove the hydrogel from the diaper and place it in a separate bowl.
3. Add shaving foam and liquid soap to the glue.
4. Stir, color if desired and add flavor.
5. Thicken the glue mass with tetraborate, adding it drop by drop and mixing the composition.
6. Inject the hydrogel a little at a time, but don't overdo it. If the slime doesn't stretch and tears, add more glue.

The consistency of the toy does not differ from that prepared with artificial snow. The recipe is simple and suitable for children.

Slime with starch

The recipe is even simpler than the previous one. For the manufacture of slime, in addition to glue, you will need starch. It creates a thick texture, and its particles form a kind of cloud. Acrylic paint is suitable for staining.

Ingredients:

• 60-70 ml of glue;
• 70 g starch;
• 150 ml of cold water.

Preparation method:

1. Dissolve the starch with water and stir until the consistency of the mixture becomes homogeneous.
2. Pour the composition into a zip bag.
3. Add glue, dye if desired.
4. Close the bag tightly and knead it with your hands until the slime thickens.
5. When excess liquid comes out of the composition, drain it.
6. Take out the slime and knead it with your hands until it thickens.

Put the resulting slime in the refrigerator.

What is cloud slime?

Cloud slime is a product resembling a cloud in appearance and consistency. It got its name in English, where "cloud" means "cloud", "cloud". A wool-like structure is achieved through the addition of artificial snow or other fine particulate ingredients.

But in the proposed recipes there is no artificial snow: this element is far from always found at home at hand. It also requires dilution with water, and it can be difficult to guess the amount of liquid to obtain a suitable consistency.

Kinetic sand is used instead of artificial snow. Shaving foam, diaper gel, starch give the slime airiness and lightness. Ready slime stretches well, soft to the touch, elastic.

This is how it differs from a similar type - snow or snow slime, which crunches when squeezed, more dense and does not stretch well.

Important! Do not think that cloud slime is obtained only with the use of artificial snow. There are recipes to achieve the perfect consistency in the absence of this ingredient.

With shampoo

Only thick glue and shampoo are suitable for this recipe. After all, the workpiece should turn out to be cool so that the additive that turns it into a cloud does not thin the mass too much.

Cooking method

1. PVA glue placed in a deep container is combined with shampoo.
2. After mixing, the liquid must be thickened with an activator.
3. Now they work in it with a spatula until it turns into an elastic mass.
4. It is crumpled a little more in the hands to make a classic slime.
5. Artificial snow is poured into another container.
6. Water is poured into it.
7. The components need to be stirred so that the moisture will increase the "snowflakes".
8. Slime is placed in a container with them.
9. Swollen grains must be mixed into the soft mass.

Without water

The absence of water in the base for the slime allows you to make its texture perfect and save time for making the toy. And artificial snow swells from the moisture contained in the glue. There is also water in the activator, which is prepared from 200 ml of liquid and 2 tsp. sodium tetraborate. But even in it, you can not use it, but get by with the drug in its pure form. Then it will take only 3-4 drops.

How to cook cloud at home

1. The first component is PVA glue, but it needs to be moved from the bottle to the cup.
2. The activator is added immediately.
3. Stir the liquid with a spatula until curdled.
4. The mass must be crumpled with your hands for a couple of minutes so that it stops sticking.
5. The next step is to add dry artificial snow to it.
6. Now the slime needs to be kneaded again with your fingers.
7. The mass will become sticky, so more thickener should be poured into it.
8. The slime will be ready after hand kneading.

Storage and use rules

Weight made according to all the rules

It is necessary to store the prepared slime in a small container that closes tightly. The best storage place is the refrigerator.

It is recommended that a child play with a slime only under the supervision of adults.

It is important to remember to wash your hands thoroughly before playing with slime. The playing surface must be clean

Lizun care requires regular water procedures and basic storage rules.

Snow slime belongs to the elite types of slimes. He will undoubtedly please even the most discerning slimer. Playing with him will bring incredible tactile pleasure and will perfectly relieve nervous tension.

Shampoo Slime

Required Ingredients:

• any shampoo (it is advisable to choose non-transparent cosmetics);
• regular table salt.

Cooking method:

1. Pour salt into the container with a thin layer on the bottom, put everything in the freezer for 20-30 minutes.
2. Take out the cooled salt, pour a little shampoo on top so that it completely covers the bottom of the container. Put the mixture back in the freezer for 20 minutes.
3. Take out the chewing gum, carefully collect it with your hands into a single lump and mix until a homogeneous consistency is obtained.

A toy made of salt and shampoo turns out to be a little watery, while it has an increased service life due to the fact that there are no components in the composition that can deteriorate.

Tips & Tricks

Having prepared a slime at home, the child acquires a kind of pet that will have to be taken care of. The slime must be fed twice a day. In the morning, several salt crystals are poured onto the surface of the slime, and in the evening it is enough to add two drops of water. After feeding, the slime is left for a couple of hours in a closed jar.

Slime can not only be fed to extend the life, but also increase the size of the toy. To do this, add a few drops of water to the container with the slime, close the lid tightly and put it in the refrigerator for ten hours. Such a simple procedure will help to "grow" your favorite toy.

While playing with the slime, the child drops it onto a dusty floor, carpet or sand. Do not leave the toy dirty, as it can dry out. For cleaning, the slime is placed in a container with water and the adhering dirt is carefully removed. Bathing is carried out for two minutes, but not more. After cleansing, the slime must be placed in a container and refrigerated for several hours.

Share link:

Out of the water

When artificial snow is added to the base, it becomes weaker, more fluid. Therefore, when they are mixed, additional activator can be used to preserve the texture of the cloud slime. And to speed up the process, you should divide the slime into pieces, work with each separately. And in the end, it remains to combine several small snow slimes into one large one.

Proven recipe

• 50 ml of clear glue,
• 1-2 tbsp. l. PVA glue,
• 1 tsp body lotion,
• 6 tbsp. l. + 3 tbsp. l. water,
• 2 tbsp. l. starch
• 2-3 drops of dye
• 2 tsp sodium tetraborate diluted with water,
• 1 tbsp. l. artificial snow.

Making snow slime at home

1. In one cup you need to combine stationery glue and PVA.
2. They are supplemented with body lotion.
3. Next, you need to add most of the water to the previous components.
4. Everything is mixed well with a mixer to get a lush and thick mass.
5. Starch is added to it and whipped again.
6. The liquid can be painted.
7. Time to use the activator.
8. The mass is kneaded with a spatula until stabilized, then by hand until tender.
9. In a separate bowl, artificial snow and the remaining water are combined.
10. When it increases, the grains are added to the slime and kneaded.

How to choose and prepare ingredients

The main component of this substance is glue, it can be PVA, silicate or clerical. The presence of an activator, which is purchased at a pharmacy, is mandatory in the ingredients. More often, a four percent solution of sodium tetraborate, or borax, borax is used. When using a powder, a teaspoon is diluted in half a glass of water.

It is advisable to use a foaming agent. Shampoo, shower gel or cream, liquid soap will do. For plasticity and softness, take a cosmetic cream, for example, for hands. An optional component used in the preparation of a slime is a shaving cream or gel, which increases the volume of the finished product.

In a snow slime, the presence of artificial snow is mandatory, which is sold in the store in bags. Before use, it is diluted with water, according to the instructions on the package. In extreme cases, a diaper or potato starch, which is pre-diluted with a double portion of water, is useful.

No artificial snow

With this method of making a toy, Pampers, of course, is not used entirely, it is too large. And gel inclusions should be chosen from torn pieces of a diaper, avoiding cotton wool if possible.

How to cook a snow slime at home

1. Put the glue in a bowl and touch it up.
2. The activating gel is added immediately.
3. Now the mass must be kneaded with a spoon to get the usual original.
4. Pieces of a clean baby diaper (diaper) are sent to another container.
5. They need to be mixed into the slime with your hands, distributing them evenly throughout the mass.

In this video on how to make a fluffy snow slime:

Scarce Components You Can Do Without

The most scarce component of the classic slime is sodium tetraborate. Brown is a boric acid salt, which is used to disinfect the skin and mucous membranes in the oral cavity. When mixed with glue, it is tetraborate that gives the desired viscous consistency of the mixture.

Tetraborate with prolonged skin contact can cause dermatitis in childhood.

Below we will look at several popular recipes without tetraborate and other scarce ingredients that can be difficult to buy. Such products are absolutely safe and suitable for children of any age.

Sodium tetraborate free

This recipe may not need all of the specified amount of artificial snow substitute. After all, it liquefies the slime. Therefore, it is necessary to pour in the swollen grains gradually, kneading the mass after each addition.

The constituents

• 100 ml PVA glue,
• 10-12 st. l. shaving foam,
• 6 doses of liquid soap,
• 0.5 tsp soda,
• 1 tbsp. l. lens fluids,
• 1 diaper (about 2 teaspoons of gel particles),
• 2-3 st. l. water.

How to make cloud slime

1. The glue is sent to a wide cup.
2. An indispensable component is shaving foam to make the mass fluffy.
3. The composition must be made homogeneous using a spoon.
4. It is supplemented with liquid soap.
5. After stirring, add baking soda.
6. In the mass, you still need to work with a spoon.
7. Next, the lens fluid is poured in.
8. Knead the mass with a spatula before curdling.
9. Then they knead it in their hands until it lags behind them.
10. The pampers are cut and gel grains are taken out of it, placing them in a separate dish.
11. They are poured with water, stirred.
12. The swollen grains are poured into a cup with slime.
13. It remains to mix the components until the toy is ready.

How to make a transparent slime

To prepare a transparent slime, you will need:

• Sodium tetraborate (available at the pharmacy);
• glue (transparent);
• mixing bowl;
• storage capacity;
• wooden stick.

To prepare an ordinary transparent slime without glitter and additional ingredients, you must:

1. Pour stationery glue into a bowl.
2. Gradually add tetraborate to the glue, stirring constantly. The substance is added until the mixture acquires the desired consistency.
3. Take the toy in your hands and knead it for 2-3 minutes.
4. Place the slime in a resealable container and refrigerate.

It is advisable to store the slime in the refrigerator after the game.

Application and storage rules

Parents, allowing their children to make and play with slimes on their own, should know that this is not the safest toy.

Therefore, you should pay attention to the following recommendations

1. Before making a slime, you need to check the child's hands for burns and wounds. If such damage is present, contact with the slime should be postponed until the skin is completely healed.
2. You should not allow your child to play with slime for a long time, since prolonged contact with the toy can cause an allergic reaction.

In most cases, the use of children's toys is limited by the expiration date, snow slime is no exception. Subject to all the storage rules, the slime will last quite a long time.

First of all, before you start making a slime, you should take care of the container in which the slime will be stored. For this purpose, a food container with a lid, which can be purchased at any supermarket, or a hermetically sealed glass jar of cream are suitable. It is advisable to store a suitable container with a slime at a temperature of three to ten degrees. Direct sunlight should also be avoided.