Recipes how to make a base for slime

Tips & Tricks

If you use PVA glue, then it is better to thoroughly ventilate the room to eliminate the smell. A few drops of essential oil will help make a fragrant slime. It is worth adding it to the recipe to make the slime smell completely different. Glowing slime will turn out if you add fluorescent paint. It is available to everyone and sold in stores.

There are other tips and tricks for saving money. Thickener can be obtained from a jar that appears empty. Do not rush to throw it away. You need to pour some water into the container and wait until a solution is obtained for a new portion of slime.

Making toys at home is fun. Children and adults alike enjoy their time together. In addition, the slime appears, which is safer than the one bought in the store.

Share link:

Features of soap slime

Soap slime does not differ in consistency from slimes obtained from other components. However, it is the detergent that is most often found in the recipes for creating this toy. This is explained by the fact that by changing the type of soap, you can create a slime of various colors.

Detergent slime has the following characteristics:

• soft jelly-like form;
• the substance does not melt in the hands (subject to the storage rules);
• able to adhere to smooth surfaces;
• leaves marks on furniture and walls.

Psychologists have found that regular slime play relieves stress. Slime also develops fine motor skills of the hands, which has a positive effect on the state of the nervous system.

Any type of soap can be used to create this toy. The only requirement is that the detergent must have a thick consistency.

Applications

So, you have made the paint for the slime. Let's see how you can apply it when creating a slime. You will need:

• PVA;
• sodium tetraborate. You can buy it at the pharmacy;
• water;
• additional decorative elements for slime (sparkles, balls). You don't have to use them;
• apron;
• rubber gloves;
• a bowl with a spoon;
• sachet.

The procedure for making slime is as follows:

1. Stir PVA, water, paint. The more glue you use, the larger the slime will be.
2. Pour sodium tetraborate into the formed mass, mix well.
3. Put the mixture in a bag and knead. The better you mix all the ingredients, the higher the quality of the slime will be.

You can also make a slime without glue. You will need:

• film mask;
• shaving foam;
• 1 tablespoon water
• dye;
• soda;
• liquid for lenses.

Slime is made like this:

1. Place the film mask in the bowl.
2. Pour shaving foam into the bowl. The amount of shaving foam should be the same as the volume of the film mask.
3. Pour water, paint into the bowl.
4. Stir all the elements.
5. Add half a teaspoon of baking soda, stir again.
6. Pour in a little lens cleaner.
7. Remove the slime from the bowl, keep it in for 3 minutes. At first, the slime will stick to the skin, however, as it kneads, it will stop. If the slime sticks to your hands anyway, use more lens cleaner.

There is another popular way to make a slime. It is considered one of the easiest methods, because it can be used by those who make slime for the first time. It includes the following stages:

1. Stir the sodium tetraborate and a cup of water in a container. You can use both boiled water and bottled water.
2. Mixing PVA and water in another bowl (equal proportions). A quarter glass of water should be enough.
3. Adding dye to a bowl of glue and water.
4. Stir the contents of 2 bowls.
5. Stir the mixture for a few minutes. The mixture should become homogeneous.
6. Adding sodium tetraborate (if the slime has become too liquid).
7. Kneading the slime in hands. Crumple the toy until it stops sticking to your skin.

From a cream without glue

This recipe uses a mask that contains polyvinyl alcohol. And it must be borne in mind that it is well stabilized, so the activator must be injected in a small amount.

Shaving foam can be replaced with the corresponding cream, only it is added in 2 times less. After all, the last resort increases in volume when stirred. The caring cream can be of any company, but with a greasy consistency.

Cooking method

1. A film mask is squeezed into a clean container.
2. If it is transparent, you can add paint.
3. The base is mixed for the first time so that the color becomes uniform.
4. For the airiness of the slime, shaving foam is added.
5. And immediately a nourishing cream is squeezed out to the previous components.
6. It's time to stir the base again.
7. When it becomes homogeneous, add Teymurov's cream powder.
8. The mass is kneaded with a spatula until folding.
9. The base lagging behind the dishes is kneaded with hands until excess moisture is removed.

Features of Lens Liquid Slimes

Kids love this toy, which looks like a slimy ball. He can change shape due to the movement of his hands. This item has a slippery, stretching structure, and its color is different. The slime first appeared in 1976 in the United States. In English it is called "hand-gum", which translates as "chewing gum for hands." The first slime was green. Then they began to make slimes of different colors.

Children and adults immediately liked the toy. The idea of ​​manufacturing was picked up by various enterprises. Other countries did not lag behind, and very soon hand-gums were being produced all over the world. Another name was also assigned to them: "slime". Usually the composition of the slime is as follows:

• activator (sodium tetraborate or boric acid);
• adhesive (polysaccharide or polymer).

Then other ingredients can be added: glitter, detergent, starch, dyes. Sometimes the slime contains the substance borax, which often causes allergic reactions. It can be toxic if used tactilely. Therefore, there is a less safe component - contact lens fluid. This substance binds the components perfectly.

Description and features

The toy is an elastic mass that glows in the dark. Slime is sold in the store ready-made, there are kits for creativity with all the components and detailed instructions on sale, or you can pick up the components separately. The last option is the most economical and allows you to vary the composition and properties of the final product as desired.

Interesting properties of the material, characteristic of the so-called non-Newtonian fluid. If you put a slime on a table or other flat surface, it will spread like spilled water. If you collect the mass into a ball and hit it with a hammer, then the slime will fly to pieces.

Cooking components

There are a lot of recipes for making such a useful gadget. According to one of the most common recipes, to prepare a cleaner you will need:

1. Borax or sodium tetraborate. The substance acts as a thickener and antiseptic. The drug is sold in pharmacies in powder or solution form. All you need is a bottle.
2. PVA or ordinary stationery (silicate) gel. Matte slime is obtained from PVA, and transparent from silicate glue.
3. Dye. Choose food colors, brilliant green, gouache, ordinary paints.

With the required components ready, you can start creating a computer keyboard cleaner.

How to properly store and care for

Slime is a capricious substance that requires constant care and attention. If you leave the slime on the table and go for a walk, it will dry out and lose its unique properties.

Therefore, it is important to properly store and take care of it.

After playing with anti-stress, the toy is placed in an airtight container. For this, the packaging in which it was sold is suitable.

Supermarkets sell sealed containers. In such containers, the slime will feel comfortable. Also, for these purposes, use bags with a clasp or jars of cosmetics. The main thing is that the packaging should close well. After all, prolonged interaction with air is detrimental to the slime.

The optimum temperature for slime is 3-10 degrees. The substance feels great in refrigerators (but not in the freezer). In fact, any dark, cool place is suitable for storing a plastic substance. The main thing is that there is no moisture there.

Slime quickly clings to dust and debris. Because of this, he becomes dirty, it is unpleasant to play with him. To keep the slime clean as long as possible, do not play with it on the floor or in the sandbox. The playing surface must be dry and clean. Then the antistress will serve the owner for a long time and retain its unusual properties.

With starch

Thanks to the starch in the composition, this slime turns out to be very soft, but not a spreading puddle. And you do not need to use glue, the specified volume of the mask-film is enough. That is, the toy turns out to be not only beautiful, but also cheap.

Easy recipe

• 14 ml film mask,
• 2 tbsp. l. starch
• 1 tsp hand creams,
• 5-6 st. l. shaving foam,
• 3-4 drops of gouache,
• 0.5-1 tsp solution for lenses.

Slime preparation method

The basis of the toy is a film mask, which is moved into a cup.

Hand cream is squeezed out to it.

The components are mixed for 2-3 minutes.

For volume and lightness of the toy, shaving foam is added to them.

The composition is mixed again, but carefully so that the foam does not settle.

The next ingredient is starch.

The base is mixed again so that it becomes homogeneous.

It's time to give the future slime a color, that is, add pigment, you can silver paint, and still work with a spatula.

The last required component is lens solution.

After adding it in portions, the base is thoroughly mixed with a spoon.

The thickened mass must be crumpled in the hands.

We recommend reading about how to make a slime out of glue. From the article you will learn how to make a slime from PVA glue, clerical, silicate, glue-stick, Titan and Moment glue.

And here is more about how to make a glossy slime.

Solutions for CL are more expensive than sodium tetraborate traditionally used in slimes. But a container of 240-250 ml is enough for a large number of slimes. And this activator is very suitable for beginners, as it is more difficult for them to reload the mass.

Be sure to watch the video on how to make fire slime with starch and lens fluid:

From detergent and shaving foam

It is better to use ARKO foam and Fairy dish gel for this recipe, then no other thickeners are needed. If you take other products for the same purpose, a solution of baking soda and water is needed as an activator. It is prepared from 2 tsp. powder and 100 ml of liquid. Add 0.5-1 tsp to the composition. stabilizing mixture, doing this gradually and constantly stirring.

How to do it yourself

1. The glue is poured into the bowl first.
2. Shaving foam is added to it.
3. Supplement the composition with dishwashing gel.
4. Mix with a spoon until the mixture curdles.
5. Take it in hand and knead it until stickiness is eliminated.

We recommend reading about how to make a soap slime. From the article you will learn how to make thirteen slimes from liquid, solid and souvenir soap.

And here is more about how to make 20 slimes from shampoo.

Dish gel makes slimes a little soapy, slippery. But it is easy to get rid of the property if you knead the toy for a longer time. And also this component gives more elasticity, makes the slime fragrant. Therefore, it can be used in small quantities in other classic recipes, not just those suggested above.

Be sure to watch the video on how to make fire slime from detergent and shaving foam:

What to do if it doesn't work

Sometimes it happens that the slime turns out to be too liquid and does not want to thicken. Do not despair, this situation is easy to fix. First, try adding more flour. When stirring the mass, add flour gradually, since the consistency density that will turn out at the exit directly depends on its amount. Stir the composition thoroughly while adding flour until you get the desired density.

You can additionally use other thickeners. Salt and food starch are safe thickeners. Sodium tetraborate or boron tetraborate is also a versatile thickener suitable for any situation. Just a few drops of boron are enough to make the mixture thick and gooey.

However, remember that sodium tetraborate is not a substance safe for the body, therefore, when it is used in the classic recipe for slime from dough, the toy will no longer be completely safe for the child's body.

Then cover the slime with a lid and leave for a few minutes. Then take the mass in your hands and knead. You can also put the mass in the microwave after adding boiling water and heat it up for forty seconds - this will help to quickly soften the hardened slime.