How to make slime from hydrogen peroxide: 7 best slime recipes at home

Useful tips for beginners

The antiseptic not only adds airiness to the slime, but also prolongs its life. However, while experimenting with different recipes on how to make slime from hydrogen peroxide, do not forget a few important rules:

It is necessary to work with peroxide until it is diluted in the slime with gloves, especially if you have wounds, abrasions or scratches on your hands.
If the recipe requires the use of glue, work only in a ventilated area.
Do not let children play with slimes if you cannot ensure proper control of such play.

Lizuns with hydrogen peroxide live up to 4 days, and if stored correctly - a week. To make the slime more enjoyable for you, after the game, remove any stuck dust or dirt from it and put it in a container with a tight-fitting lid. It is best kept in the refrigerator.

When the slime begins to deteriorate, then first of all it loses its stickiness. Then the consistency changes: the antistress dries up and cracks, or it is divided into several layers. Food-based toys can even grow moldy. Spoiled antistress must be eliminated immediately.

How to make slime from hydrogen peroxide - watch the video:

Hydrogen peroxide slime is an unusual phenomenon in the world of slime. Despite the fact that antiseptic is not an obligatory component of antistress, individual textures will not work without it. That is, you cannot thicken the slime with peroxide, it will not become the basis of the recipe, but added in the correct proportions to the right formulations will help make the lightest and most voluminous antistress toys.

Ingredients for making slime

In order to create an elastic slime mass, two key components are needed - a polymer base and a thickener. A 3% hydrogen peroxide solution is an oxygenate dissolved in water. By the way, peroxide itself is very unstable and slowly separates into separate components - oxygen and water. That is, the substance cannot be attributed to either a polymer base or an activator. And yet, passionate slimers claim to know how to make a slime from hydrogen peroxide.

If you are careful and approach the analysis of such recipes from a scientific point of view, it will become clear that in recipes for making slime from peroxide, in fact, an antiseptic is used as an auxiliary component. The oxygen released during the destruction of peroxide (the general name of the substances to the group of which the antiseptic belongs) gives the texture of the slime airiness and lightness, but still the elasticity and elasticity of the mass is formed due to other basic components.

In fairness, it should be noted that repeating the same light textures without peroxide is unlikely to work. Thus, those who claim that it is possible to thicken the slime with peroxide are simply not familiar with the chemistry of the process. But it is also impossible to say that one can do without a substance, since the texture obtained with its help is unique. Thus, despite the fact that the component is not the leading one in slime, we can rightfully say that the slime is made from peroxide, because it is she who adds unique properties to the slime.

Hydrogen peroxide can be purchased at pharmacies in the following forms:

The marker is very convenient for treating wounds, but it is not suitable for sliding, since there is too little active substance in it.
Spray - can be used in work, but this form of release is quite expensive in relation to the amount of the key component in the bottle.Sprays are also inconvenient to use, as the slimer will simply get tired of pressing the spray to get the right amount of peroxide.
The liquid form is sold in various volumes - from 45 ml to 200 ml or more, but you can also find not only 3% solutions, but also 45%, 60%, the amount of the active component in this case is higher in the solution.

As you can see, the liquid form is the most suitable for sliding. This solution is easy to measure and store in a bottle after use.

Note! If no other condition is indicated, in recipes on how to make slime from hydrogen peroxide, a 3% pharmacy peroxide solution is used. If you have 45% or another solution, the amount of ingredients specified in the recipe must be counted .. As already noted, doubts about whether it is possible to make a slime from hydrogen peroxide are not groundless - the substance does not form a polymer structure of the base and is not able to thicken the original materials

Thus, other basic components must be used in recipes:

As already noted, doubts about whether it is possible to make lizuna from hydrogen peroxide are not without grounds - the substance does not form the polymer structure of the base and is not capable of thickening the starting materials. Thus, other basic components must be used in recipes:

PVA or silicate glue as a base for slime with hydrogen peroxide;
activator - sodium tetraborate, borax, washing gel, Naphthyzin or lens storage agent, ethyl alcohol for silicate glue;
thickening foods - flour, starch, sugar, salt;
foaming agents - dishwashing liquid, shampoos, shower gels that enhance the airy properties of the slime.

The combinations and proportions of these substances will depend on the recipe being sold. And at the same time, the slider is not limited in experiments. Since hydrogen peroxide is a very cheap material, you can try other handy remedies at home and add to the list above.

From Persil without PVA glue

You can take the cheapest film mask for this method of making slime

Its color does not matter, the presence of polyvinyl alcohol in the composition is important

Kinetic sand makes the slime more dense, but does not prevent it from stretching well. You can also decorate the slime with glitter. And if the mask is transparent, you should use a dye to make the toy brighter. The pigment is added to the mixing bowl second in a row.

How to make a slime with your own hands

The mask is squeezed into a deep dish.
Now you need to pour washing gel into it.
The components are mixed with a spoon, which makes the liquid thicken.
The resulting mass should be slightly wrinkled with your hands.
Then kinetic sand is added to it.
It remains to knead the slime again so that its texture becomes uniform.

Most popular questions

What is the best glue to use?
The main qualities that a product should have are stickiness, thickness and stickiness. There is an opinion that it is preferable to take helium adhesives, but this is not always the case. Different brands produce many variations, so in order not to make mistakes in the process, it is better to do a validity test in advance. To do this, pour the glue mass into a glass and add sodium tetraborate drop by drop. Actively interfering, you need to monitor the reaction. A suitable option will become an elastic prototype of the toy.

Is it possible to make a slime without glue and how to replace it?
Yes, many recipes can be found where it is not required. Replaced with shampoo, toothpaste, starch, flour and other combinations.

How and where are homemade slimes stored?
It can be stored in the refrigerator or at room temperature, depending on the composition. The main condition is a tightly closed container.

It is very easy to make a developmental mass at home. Compliance with safety rules and fresh ingredients will bring the pleasure of creating your own hand-made gum.

From Persil capsules

With this method, you can slightly increase the volume of the main activator, for example, add another half of the capsule of the agent. But you need to be careful with soda. If you use too much of it, the base will become loose and even more sticky. And the slime can fall apart.

How to make a slime at home

Pour the glue into a clean dish.
The Persil capsule is incised and the entire contents are added to the first component.
The mass must be made homogeneous.
Then she is left alone for 5-10 minutes, without covering the dishes.
Over time, knead the present mass slightly.
You need to add half of the soda to it.
The base is stirred for the food additive to take effect.
The rest of the soda should be applied to the palm of your hand.
Now knead the slime with your hands until tender.

We recommend reading about how to make a crispy crunchy slime. From the article you will learn how to make crunch slime from silicate glue, glue stick, PVA glue, cocktail tubes.

And here is more about how to make a magnetic slime.

With Persil, making slimes is available to a lot of people, because there is a tool in every home. The toy differs from those made with sodium tetraborate, elasticity, it can be inflated to bubbles. And it is more difficult to re-thicken the mass with washing gel, since its stabilizing effect on the glue is softer.

Be sure to watch the video on how to make fire slime from Percil capsules:

From flour without glue

This method assumes that the liquid should be 2 times more than the crumbly component. The mass must be thickened over medium heat, stirring constantly. Instead of a stove, you can put it in the microwave for half a minute. And you can't stir the composition there.

How to make at home

Pour water into a container with a friable component.
Mix everything so that the liquid becomes homogeneous.
Tint it with pigment.
Pour into a heated skillet and stir until thickened.
Remove the dishes from the heat, let the mixture cool to a warm state and knead the slime with your hands.

Homemade soft slime recipes

To make fluffy slimes at home, you don't need to use complex ingredients and spend a lot of time. This exciting activity can be done not only by an adult, but also by a child.

From starch and shampoo

Composition:

potato starch;
shampoo.

Pour 100-120 grams of potato starch into a cup, add any shampoo for washing hair.
Instead of shampoo, you can use shower gel or liquid soap.
Mix thoroughly, first with a tablespoon, then with your hands. You will get a stretching slime.

Instead of starch, it is also advised to use flour, but with starch, the slime turns out to be softer and more elastic.

To add color during the preparation of the slime, you can add any dye (watercolors, gouache or food coloring).

Shaving foam and glue

Composition:

PVA glue;
baby cream;
shampoo;
shaving foam;
sodium tetraborate.

Pour 150 ml of PVA glue into a container, add a little baby cream for greater elasticity and silkiness.
To make the slime crunchy, you can add a little shampoo.
The last step is to add five to seven tablespoons of shaving foam.
Stir with a stick until thickened, adding a little sodium tetraborate.
Then knead everything with your hands. You should get a viscous, shiny mass, very pleasant to the touch.

Add dye, beads or sparkles if you wish.

The more shaving foam is added, the fluffier and fluffier the slime will be.

Without PVA

Composition:

thick shower gel;
Toothpaste;
nasal drops "Naphtizin";
pure water;
baking soda.

Pour water into a plastic container, squeeze out a pea of toothpaste and shower gel.
Close the container and shake it well so that the mass is fluffed up. The result is a thick foam without a gram of liquid.
Pour into a deep cup.
Then add baking soda to the tip of a knife.
After mixing all the ingredients, add "Naphtizin". It should be added dropwise for better thickening of the mass.
Knead with your hands until the process is complete.

Due to the lack of PVA glue in the composition, the toy will turn out to be especially airy.

Sodium tetraborate free

One of the best thickeners for slime is sodium tetraborate. It is a boric acid derivative antiseptic.

Sodium tetraborate in floppy slime can cause an allergic reaction, which manifests itself in the form of a rash, irritation on the skin of the hands. Allergies can also be expressed in the form of sneezing, lacrimation, up to respiratory depression.

With prolonged use, symptoms of chronic intoxication may develop

Therefore, people prone to allergic diseases should pay attention to the recipe without sodium tetraborate

Composition:

2 tablespoons of any liquid soap;
150 ml of PVA glue;
Toothpaste;
one pinch of baking soda.
as a thickener, you can take Teymurov's foot spray.

Sequentially adding all the components to the container, mix the mixture thoroughly until the mass begins to stick off your hands.

Best hydrogen peroxide slime recipes

Whatever recipe you choose, how to make slime from hydrogen peroxide, you need to work very quickly. The instability of the material requires active mixing and rapid thickening of the composition. If too much water is produced during the slime process, more activator can be added. But in order to save materials, it is recommended to transfer the slime from a wet dish to a dry one and continue kneading. Well, if you decide to make a colored slime from peroxide, then it is better to use food coloring. Of course, the product will not become edible from this, but on the other hand, such dyes certainly do not contain catalysts for the decomposition of hydrogen peroxide.

Slime with glue

Adhesives themselves are very elastic - they stretch well and do not tear. The disadvantage of the classic glue texture, advanced slimers call the annoying "churning" of the mass. Hydrogen peroxide adds air porosity to the slime. Such slimes are very pleasant to crush, and even a small amount of key ingredients allows you to get a huge anti-stress.

Ingredients:

PVA working glue - 50 ml;
starch - 4 tablespoons;
hydrogen peroxide - 1/2 tsp;
water - 125 ml;
sodium tetraborate - 5 drops

How to make hydrogen peroxide slime:

We heat the water, but do not bring it to a boil. Mix with starch and stir well so that there are no lumps. Starch mixes worse with cold water.
Add glue to the solution and mix again until a homogeneous substance is obtained.
Pour hydrogen peroxide into the mixture and mix quickly.
Pour in the thickener drop by drop, stir until the mass begins to curl up.
We take the slime with hydrogen peroxide out of the bowl and knead it with our hands for about 15 minutes.

Food coloring, if you want to get a colored slime, it is better to add it to the adhesive before the peroxide is added. And having played enough with air antistress, you can add tough charms or ordinary foam balls to it. The difference in textures will give the game new interest.

Slime with shampoo

For many, it will be a discovery that you can make a slime from hydrogen peroxide with baking soda and shampoo. The composition does not even use a thickener in the classical sense of the word, but for the base it is necessary to take a glue stick.

Ingredients:

hair shampoo - 50 ml;
stationery glue stick - 1 tube (20 g);
soda - 2 g;
peroxide - 2 drops

How to make a shampoo slime:

Beat the shampoo until a light foamy state to form a bubble foam.
We melt the glue stick in the microwave, for this we leave the tube in the defrosting mode for a few minutes. Make sure that the mass does not boil.
Pour the glue into the shampoo and stir well.
We introduce soda into the glue mass and mix, and then add peroxide. The reaction of soda with it will provoke the active growth of slime.

For work, it is recommended to take a large container, since the mass will increase several times. The slime will not stick to your hands, but will feel like a "gentle cloud" to the touch. However, the disadvantage of anti-stress is fragility. Slime quickly loses its qualities and does not lend itself to resuscitation.

Slime with starch

Starch and slimes based on it are used by children, as the food is safe and does not cause allergies. However, antistress with peroxide, even on a starch basis, can be given to children only under the supervision of parents.

Ingredients:

water - 2 tablespoons;
starch - 2 tablespoons;
PVA glue - 2 tablespoons;
hydrogen peroxide - 1/2 tsp

How to make starch hydrogen peroxide slime:

We warm the water a little (but do not let it boil) and add starch there. A well-mixed mixture should have a consistency similar to uncured jelly. More starch or water can be added as needed.
Add glue to the work utensils and mix. If at the second stage the mass again became liquid, then you can return the required consistency by adding more starch.
Pour peroxide into the mass and mix well.

The resulting slime from hydrogen peroxide is very similar in properties to finger textures. It is impossible to form roses from it, but it is still fun to play, changing the degree of influence on the substance (squeezing and releasing the mass).

How to make a toy?

There are many ways to make a hydrogen peroxide slime. Further, only proven recipes are offered to your attention.

With PVA glue

To make this slime, you need the following components:

glass of water;
100 g of soda or starch;
100 g PVA glue;
a bottle of peroxide;
dye.

When all the components are assembled, you can proceed to the creative process itself.

To begin with, the soda is mixed with 100 ml of water, then glue is added and everything is stirred again.

After that, peroxide and dye are added to the resulting mass and mix until a homogeneous mass is obtained.

When adding peroxide, it is important not to overdo it and pour it in gradually.

The correct slime should be airy, light and pleasant to the touch. If the consistency of the slime is slightly thick, then you need to add a little water.

Video review of making slime from starch and hydrogen peroxide:

Slime without glue with shampoo

To make this slime, you need to prepare the following components:

hydrogen peroxide;
50 ml shampoo;
50 g flour;
vegetable or cosmetic oil.

Pour the shampoo into a container and mix it with a few drops of hydrogen peroxide, and then place the resulting mass in the freezer for several minutes, usually just 3-4 minutes is enough.
After removing the mixture from the freezer, add a few drops of oil to it and mix everything thoroughly again, and then send the resulting mass to the refrigerator for a day.

It is important to remember that during this time, the mixture should be stored in the refrigerator only open. After the expiration of the appointed time, the toy can be taken out of the refrigerator and enjoy the game.

This slime will last much longer if you store it in the refrigerator in a closed airtight container.

A very simple recipe

Of the components you will need:

100 ml shampoo;
a pinch of salt;
a few drops of hydrogen peroxide.

All components must be mixed together until smooth.

Slime in 3 minutes

To prepare such a slime you will need:

2 tbsp. l. PVA glue Ray;
any dye;
hydrogen peroxide.

Glue and paint should be mixed together until smooth, add just a couple of drops of peroxide, mix and set aside for half a minute.
Then the thickened slime needs to be kneaded with your hands and that's it, the toy is ready.

Bouncy

This recipe can be used to make a bouncy slime. To make it, you need the following components:

glass of water;
potato starch - 100 g;
PVA glue - 100 ml;
peroxide;
dye.

In a deep bowl, you need to mix starch and water, knead the resulting mass best with your hands, because it is rather difficult to do this with a spoon. Knead the mass until it becomes monotonous, and in density it does not resemble jelly.
Then you need to add a small amount of dye and mix everything thoroughly again.
Pour PVA glue into the resulting mass, and then again bring the mass to homogeneity, and add peroxide, after which the mixture must be kneaded well and left to lie down for two or three hours at room temperature.

Making a toy in the microwave

To make this slime, you need the following components:

glue stick;
50 ml shampoo;
hydrogen peroxide;
a pinch of tea soda.

Cut 20 grams of glue stick into thin rings and melt in the microwave, you can also do this in a water bath.
As soon as the glue melts, pour shampoo into it, and stir until all the lumps of glue dissolve and the mass becomes homogeneous.
Then add 2-3 drops of hydrogen peroxide and mix everything thoroughly again.
The mass should begin to foam and increase in size, then you can add tea soda and continue to stir. Thus, the mass is kneaded until fully cooked.
When it becomes dense, elastic and viscous, you need to leave it alone for several hours, and after a while, feel free to take and play with a new slime.

Basic ways

It is quite simple to make a slime on your own at home. The toy is made from scrap materials: shampoo, water, plasticine, soda, starch. In case of self-production, it is possible to adjust the texture of the slime, to create a unique design.

Simple recipe

This recipe for making slime is the safest (without any chemical ingredients), environmentally friendly, perfect for families with small children. Would need:

Mix flour (300 g) with cold water (50 ml).
Add 50 ml hot water (not boiling water).
Stir, refrigerate for 3-4 hours.

In fridge

Almost every recipe for making slime at home ends by placing the toy in the refrigerator. This allows the slime to freeze and take the required shape. It is enough for the container with the toy to stand at a temperature of 3-4 degrees for several hours.

Quick recipe with PVA glue

The easiest way to make slime is from hydrogen peroxide with PVA glue. Slime is characterized by hardness and high jumping ability. For cooking, you need the following ingredients:

water - 250 ml;
soda / starch - 100 g;
PVA glue - 100 g;
hydrogen peroxide.

Colorants can be added if desired. You will need to mix soda or starch with water in equal proportions to a jelly-like consistency. Peroxide and dye are added to the resulting mass. The resulting composition is thoroughly mixed. If the mixture is too thick, add water or change the proportion of ingredients.

Slime Jumper

To prepare a slime that will be a jumper, you will need:

stationery glue;
ethanol;
dye (optional).

The ingredients are mixed (1: 1 ratio) until a homogeneous mass is formed. The mixture hardens quickly, so it is necessary to quickly form a ball. The finished bouncer should dry out after 10-15 minutes.

In the microwave

To cook slime in the microwave you will need:

50 ml shampoo;
glue stick - 16 g;
soda - 2 g.

The glue is cut into small rings and then placed in a microwave oven for 10 seconds in the “defrost” mode. The softened glue is mixed with shampoo until smooth, after which hydrogen peroxide is added. Everything is thoroughly mixed until foam is formed. Then you need to add soda. Further, the mixture is only kneaded until ready. If you add more soda than required, the toy will not work - the consistency will be thinner than required.

With shampoo

Slime can be created from any shampoo that is in the house.You will need to mix the following ingredients until smooth:

shampoo - 100 g;
water - 100 g;
starch - 200 g.

The resulting mixture must be refrigerated for 12 hours. Often, instead of water and starch, glue with a dense texture (for example, "Titan") is used. At the same time, it is better to mix shampoo and glue in a tight bag (proportion 2: 3). The bag is securely closed and shaken until the mass thickens. The resulting mixture is left for 10 minutes without moving. At the end of this time, you can start making slimes.

With starch

Another way to create a slime:

pour 120 ml of shampoo or liquid soap into a container;
add starch (280 g) and mix;
add warm water (90 ml) and stir until a slime is obtained;
put the result in the refrigerator for 12-15 hours.

The starch can be replaced with corn flour.