Hairspray slime

How to: homemade recipes

Glycerin is a popular remedy for making slime, so there are many recipes based on it. Some people prefer to use glue according to the classic recipe, while others try to get by with the tools at hand that can be found in any kitchen.

With PVA glue

To make such a slime, you will need:

• 0.5 tsp borax;
• 30 ml of glue;
• dye of any color;
• water.

Take any 2 containers. The slime mixture will need to be prepared in two parts.

1. Pour a cup of warm water and 0.5 tsp into the first container. borax. The solution is thoroughly mixed with a spoon or spatula until the powder is completely dissolved.
2. In a second container, mix half a cup of water, glue, 5 drops of yellow and 2 drops of green dye.
3. All components are thoroughly mixed to a single consistency. The solution with brown is carefully poured into a second container.

It will be possible to observe how the mixture begins to turn into a viscous mass. It can be picked up, kneaded and played. This composition is a ready-made slime.

Important! It is forbidden to put the mixture in the mouth. Video about another recipe for making glycerin slime with the addition of stationery glue and sodium tetraborate:

Video about another recipe for making glycerin slime with the addition of stationery glue and sodium tetraborate:

No glue

Components required for the preparation of slime:

• thick shampoo;
• shaving foam;
• dye;
• potato starch;
• 0.5 tsp glycerin;
• contact lens fluid.

1. Shaving foam and shampoo are mixed in equal proportions.
2. Next, the dye of the desired color is dripped.
3. Pour glycerin into the mixture, after which the starch is in small portions, until the composition in the bowl looks like a soft sandy plasticine.
4. Add 10-12 drops of contact lens fluid to it. It will act as a thickener.

With soda

Due to the content of a detergent from the category of household chemicals, it is recommended to give a slime from baking soda to a small child only in the presence of adults. After playing with such a slime, it is imperative to wash your hands with soap so that the soda does not get on the mucous membranes of the eyes and mouth. Otherwise, severe irritation and chemical burns will occur.

Required Ingredients:

• dishwashing liquid;
• soda;
• water;
• glycerol;
• dyes optional.

1. Dishwashing liquid is poured into the container along with the dye. There is no exact dosage, the ingredients are gradually mixed. Detergent can be poured in while kneading.
2. Next, pour baking soda, glycerin into a container with a blank, mix everything thoroughly.
3. Water is added at the end so that the slime is not too dense. The resulting mass should look viscous, springy in your hands, like rubber.

With hydrogen peroxide

Attention! Hydrogen peroxide makes the slime bouncy, adds density when mixing. But because of the H2O2 bubbles, the toy is not heavy, but airy and light

To create a handgam, the following components are required:

• 250 ml of water;
• 100 g starch;
• 100 ml of PVA glue;
• 2 drops of dye;
• hydrogen peroxide;
• some glycerin to make the slime slippery.

1. The starch is mixed with water. The result should be a viscous mass that looks like jelly.
2. Then add the dye and glue, mix the composition until smooth.
3. Hydrogen peroxide is poured in, mixed until a thick mass is obtained. If it becomes too dense, it can be diluted with water.

Hairspray slime recipes

It has been empirically established that not all varnishes are equally effective in sliding. As a rule, the most affordable will be the most effective for thickening the mass.Among the popular products are called Prelest and Pure Line hair sprays.

If you have products from another manufacturer on hand, it is recommended to test the suitability of such a varnish on a small amount of glue. Only after making sure in practice that all the ingredients are working, proceed to create a slime from hairspray. In this case, reading the composition of the styling product will not clarify the situation, since manufacturers do not always indicate the full composition and concentration of substances acting for slime.

Another challenge in creating hairspray slimes is the lack of precise proportions. It is impossible to calculate the required amount of varnish, since the active substances in its composition differ depending on the manufacturer and the degree of fixation of the varnish. It is recommended to use varnishes of the highest degree of fixation in work, since the concentration of active substances in them is higher.

Hairspray slime with silicate glue

The easiest way to make a hairspray slime is to activate the adhesive with a spray. Slime may not work only if not enough thickener is added. To check the recipe, it is recommended to start with a small amount of glue, and when injecting varnish, bring the sprayer as close as possible to the workware. These simple tips will help you check the recipe without using the entire varnish bottle.

Ingredients:

• silicate glue - 1 tbsp.;
• dye - optional;
• hairspray "Pure Line"

How to make a hairspray slime:

1. Pour the glue into the cookware and stir.
2. Inject hairspray into the glue and stir until the composition starts to "roll up".
3. We repeat the procedure of injecting varnish and mixing until the mass stops sticking to the walls of the dishes.
4. If the hairspray slime is loose from the sides of the work bowl, but sticks to your hands, add a pinch of baking soda to the composition and knead well.

In this case, the dye is mixed with the glue until the activation stage. However, it is recommended to use dyes when you are completely confident that the ingredients are working. The slime will turn out to be very elastic, you can even inflate bubbles from it. And at the moment of squeezing the mass, it becomes elastic.

Hairspray slime with PVA glue

Combining several types of adhesives and thickeners is more likely to achieve the desired slime consistency. Foamy textures, in turn, add anti-stress airiness and crunch during squeezing.

Ingredients:

• PVA glue - 50 ml;
• silicate glue - 100 ml;
• hair foam - 50 ml;
• sodium tetraborate - 1 tsp;
• strong hold hairspray

How to make a hairspray slime:

1. Thoroughly mix PVA glue and silicate in a working container.
2. Add hair foam to the glue mixture and stir until a homogeneous mass is obtained.
3. You can add dye to the liquid mixture if desired, but before proceeding to the next step, achieve an even distribution of tones in the mass.
4. Hairspray should be added as the first thickener. The amount of spray varies depending on the manufacturer. But to obtain a tangible effect of folding the mass, as a rule, 6-10 pressings on the balloon are enough.
5. Add sodium tetraborate and knead with your hands.

Regardless of the recipe and the amount of ingredients, the peculiarity of working with varnish in slime is its long-term mixing. In some cases, it may take up to 30 minutes. There is no way to speed up the process.

But not only glue bases are suitable for creating hairspray slimes. A slime that is soft in texture will turn out if you thicken the mask-film for the face with varnish. Depending on the amount of activator, you can make a finger slime or an elastic original.

Important! Since hairspray comes in the form of an aerosol, which in most cases has a pungent smell, it is best to create a slime with it in a well-ventilated area or in a respirator.

With starch

Thanks to the starch in the composition, this slime turns out to be very soft, but not a spreading puddle. And you do not need to use glue, the specified volume of the mask-film is enough. That is, the toy turns out to be not only beautiful, but also cheap.

Easy recipe

• 14 ml film mask,
• 2 tbsp. l. starch
• 1 tsp hand creams,
• 5-6 st. l. shaving foam,
• 3-4 drops of gouache,
• 0.5-1 tsp solution for lenses.

Slime preparation method

The basis of the toy is a film mask, which is moved into a cup.

Hand cream is squeezed out to it.

The components are mixed for 2-3 minutes.

For volume and lightness of the toy, shaving foam is added to them.

The composition is mixed again, but carefully so that the foam does not settle.

The next ingredient is starch.

The base is mixed again so that it becomes homogeneous.

It's time to give the future slime a color, that is, add pigment, you can silver paint, and still work with a spatula.

The last required component is lens solution.

After adding it in portions, the base is thoroughly mixed with a spoon.

The thickened mass must be crumpled in the hands.

We recommend reading about how to make a slime out of glue. From the article you will learn how to make a slime from PVA glue, clerical, silicate, glue-stick, Titan and Moment glue.

And here is more about how to make a glossy slime.

Solutions for CL are more expensive than sodium tetraborate traditionally used in slimes. But a container of 240-250 ml is enough for a large number of slimes. And this activator is very suitable for beginners, as it is more difficult for them to reload the mass.

Be sure to watch the video on how to make fire slime with starch and lens fluid:

How to make: the best recipes

With PVA glue

Required Ingredients:

• PVA glue - one tube;
• dye;
• air freshener.

How to do:

1. Pour a tube of glue into a container and add paint.
2. Stir well to distribute the color.
3. Spray 2-3 times with folding spray while stirring.
4. Knead until the mixture stops sticking.

If the slime doesn’t work, it’s a spray, it should not foam when spraying!

Video on how to make slime from air freshener and PVA glue:

With shaving foam

If you have foam, cream or shaving gel lying around at home, then you can make a slime out of it! It will be no worse than those sold in the store.

Components:

• 3-4 st. l. foam;
• dye;
• 1 tube of soap bubbles;
• 2-3 drops of sodium tetraborate;
• air flavoring.

Preparation:

1. Pour the soap bubbles into a bowl, beat well, then gradually add foam, without stopping stirring.
2. Then you need to touch up the liquid, sprinkle 2-3 times with a spray and add sodium tetraborate.
3. Stir until firm.

If you want a fluffy, soft fluffy, beat the shaving foam thoroughly!

Hand gum with shampoo

Shampoo can be in the slime and the main and additional components. If it is basic, you need to take a thick shampoo. Color - your choice: transparent, white or colored.

You need to take:

• 100 ml shampoo;
• 100 ml shower gel or dish detergent;
• air freshener;
• plastic dishes.

How to do:

1. Pour shampoo into a bowl, add shower gel or dish detergent.
2. Mix the two components thoroughly, add 2-3 “zips” of air flavoring and put in a cool place overnight.
3. In the morning you will have a fully finished toy.

The shampoo slime not only sticks and stretches, it can make clicks.

Slime with toothpaste

Toothpaste is added to the slimes so that they are not too steep, that is, it is rather a minor, although quite important component. But in some recipes, the agent is used as the basis of a toy.

Components:

• 4 tbsp. l. thickener;
• 1 tbsp. l. toothpaste;
• 20 "zips" from a spray;
• dye.

Preparation:

1. Mix the thickener with the paste, add the dye.
2. Introduce a freshener and mix until firm.
3. Then knead in your hands until you stretch well.

If the mass does not harden, you need to add another portion of toothpaste!

With soda

This cooking recipe is popular, but be prepared for the toy to last no more than 3 days, but given the ease of its manufacture, this may not be considered a disadvantage.

Ingredients:

• 3 tbsp. l. PVA glue;
• 10 servings of air freshener;
• 2 tsp baking soda;
• paint optional.

How to do:

1. Dilute the thickener with paint and baking soda, add deodorant.
2. After the bubbles appear, knead until the mass peels off the walls of the dish.

Add another teaspoon of baking soda if needed.

How to store homemade slime

If you follow several conditions, the slime will delight you for a very long time. First and foremost, don't keep it outdoors. Slime is stored in a tightly closed container in the refrigerator, otherwise it will dry out. In the warmth, in the sunlight, it will begin to spread. For the same reasons, you can't play with him for a long time.

After making a slime out of glue, it is "fed" once every two weeks:

• a little warm water is poured into a container from under the slime;
• add a pinch of salt;
• dip the slime into the container, cover and leave for a while.

This is a universal procedure that will preserve the elasticity of a slime prepared from any components. You also need to clean the slime after playing, do not place it on fleecy surfaces and do not give it to animals.

Glue slime is a safe fun for children and a relaxation toy for adults. Every home has most of the ingredients, which means that there is no need for special financial expenses, you can make different slimes by experimenting with the ingredients.

How to care

The service life of the slime depends on how correctly the care for the slime will be.

Nutrition

The food of the toy consists of salt and water. You can also give an eraser, but this is not necessary (it will restore structure if the slime has shrunk). The standard slime's diet is 1 to 5 pinches of salt. Placed on the bottom of a small container, covered with salt and water. Close tightly with a lid, shake and leave for 2-3 hours.

Small house

The slime must be kept in the house. To do this, use a colored jar, which is tightly closed with a lid. It is imperative to clean the container at least once a week.

Bath

Slime is given a bathtub. Place the toy on the bottom, wash it with a little warm water and hide it in the house again.

Place for the game

It is advisable to allocate a place for the game. In this case, the slime will not absorb dust and dirt, so it will last longer.

Place in the refrigerator

In order to put anti-stress in order, sometimes it needs to be placed in the refrigerator. Do not store near strong-smelling foods, such as fish, cheese, as it will absorb their odors.

What is slime

Slime is a gooey toy first released by Mattel in 1976. The mass consists of a jelly-like material that has the properties of a non-Newtonian liquid.

The toy looks like slime, but does not spill, it is easy to shape. In appearance, the slime resembles a jelly mass. When the child picks it up, he is grasped by a viscous colored liquid that relieves stress. The toy is bright, it comes in different shades, with or without sparkles. Slime attracts children of all ages, sometimes even adults.

There are on sale slimes with foam balls in the form of filler. They clink, crunch remarkably. In addition to balls, the slime can also contain many cubes made of adsorbent substances, toy figures.

Components for slime

To make a glossy slime, preliminary preparation of the following components will be required:

• 100-120 milliliters of clear glue;
• 100-120 milliliters of PVA glue;
• 1 tablespoon water
• ½ tablespoon of fatty cream or lotion;
• ½ tablespoon of clear, gel-like soap (shower gel or shampoo);
• an incomplete teaspoon of body oil or unscented vegetable oil;
• sodium tetraborate solution as a thickener, borax, or lens cleaner;
• dye.

In addition to the components for the slime, preparation of containers for preparation will also be required: a deep bowl, a container with a small lid, a teaspoon, a tablespoon. The utensils used for the preparation of slime should not be further used for cooking.

Before cooking, it is also important to protect yourself from the harmful effects of the components that make up the slime. This will require medical gloves, overalls and an apron.

Tips & Tricks

Often the slime does not turn out the way you want to see it. It either sticks to your hands, or is very liquid, or turns into a piece of plasticine, which is difficult to wrinkle in your hands. To prevent this from happening and the antistress to be of optimal form, it is necessary to correctly follow the order of immersion of the ingredients. The proportions may differ slightly depending on the quality of the products (one glue is thicker, etc.). You should be guided by logic, sometimes you have to add more volume

It is worth paying attention to the tips:

• if the slime is too liquid and refuses to keep its shape, then you need to put the bowl with it on low heat and evaporate the excess liquid;
• if the product does not stretch, but simply breaks, then it is worth adding more glue and carefully crushing the mass with your hands;
• if the slime is hard like a stone, then you need to add a couple of drops of water and send it in a glass jar to a dark room - it will soften after absorbing moisture.

The product takes on extraneous odors, so the problem of cleaning it is always relevant. You can just hold the slime under running water for a couple of minutes, but this does not guarantee complete elimination of the unpleasant odor. It is better to cover it with soda for a couple of hours and send it to rest in a dark room. After rinsing and drying, treat with aromatic tea tree oil. The toy does not accept hot temperatures, therefore it is prohibited to dry it with a hairdryer. They also do not use deodorants or perfumes - they will temporarily mask the aromas, but will not completely remove them.

p> Share link:

Features of application and care

Self-made slimes have a limited lifespan due to their organic components. To extend it as much as possible, you need to follow some recommendations:

1. be sure to place for storage in the cold, in a closed container;
2. do not expose to heat and do not keep near heating devices;
3. avoid contact with fleecy materials;
4. when the toy dries, immerse it in water; in case of excessive humidity, treat it with salt.

It is not recommended to store slimes for more than 10 days, as harmful bacteria may form.

With the help of a cosmetic hand cream, it is quite easy to make pleasant and beautiful slimes at home on your own. You can creatively experiment with components, invent and have great pleasure from the results obtained with family and friends.

PreviousSimple recipes for making slime from glue and soda. What is the peculiarity of such a slime? NextTasty slime from sweets - how to make an edible slime on your own?

What is the best hygiene product?

Toothpaste is used in slime as a thickener. To make the toy a viscous and sticky consistency, the paste must contain certain components. These include:

• pectin;
• cellulose;
• glycerol.

These ingredients will give the slime a jelly-like texture. To obtain a porous toy (fluffy), you need to choose a paste containing sodium lauryl sulfate or bitain.

When choosing a toothpaste for making a slime, you should pay attention to the following brands:

• Karimed;
• Sanino Anti Cavity;
• O.C.S .;
• Oral-B;
• 32 norms;
• Splat Professional Ultracomplex;
• Optifresh.

Important! If you do not use toothpaste in the manufacture of this toy, then it will not have its unique properties.