Home slime

From toilet paper and soap with starch

The volumes of the ingredients in this recipe are approximate. After all, liquid soap comes in different consistencies. Therefore, more or less paper pieces may be required. And flour from different manufacturers is different: one swells more from moisture, the other less. Therefore, the friable components must be put in portions, mixing the composition, and each time assessing the consistency.

Simple recipe

• 4 tbsp. l. liquid soap,
• 5-6 st. l. pieces of toilet paper
• 1-2 drops of liquid dye
• 3 tbsp. l. starch
• 1 tbsp. l. flour.

How to make slime

1. Pour the soap into a cup.
2. Then they put pieces of toilet paper in it.
3. And everything needs to be mixed so that they dissolve in a soapy liquid.
4. The base should be tinted.
5. After stirring the pigment, the starch is poured.
6. It must be distributed evenly throughout the mass.
7. Pour flour next.
8. The composition must be kneaded well again with a spoon.
9. After it is compacted, it remains to knead the slime in your hands.

We recommend reading about how to make a slime out of glue. From the article you will learn how to make slime from PVA glue, glue stick, silicate and clerical glue, Moment and Titan glue.

And here is more about how to make an airy fluffy slime.

Slime paper not only allows you to reduce the amount of glue or mask-film, it also makes the toy unusual. But you should not save on this ingredient, especially since you will need very little of it. Cheap paper does not dissolve well in liquids, and the slime will come out tough, poorly stretched, falling into pieces.

Be sure to watch the video on how to make a fire slime from toilet paper and soap:

Grain flour slime

This is the easiest, fastest and most child-friendly way to "give birth" to a slime. Such composition:

• flour - wheat or rye, the color of the toy depends on it - light or light brown;
• heat water and keep another glass or mug cold;
• choose food paints.

Step-by-step instructions for obtaining a handgam:

Pour flour into a plate. Gradually pour in a fourth of a container of cold water, then a little hot (60-80 degrees). Knead without lumps - pasty. Then mix with the dye to a pleasant brightness.

Put the symbiosis in the refrigerator for three hours or on a cool closed balcony. Then remove the slime from the plate.

Change a lot, make a little man, an animal at your discretion. And prepare the plot of the role-playing game, where they will take turns reincarnating under your fingers.

From glue and paper

The silicate glue used in this recipe can be replaced with clerical or PVA glue. But the product chosen must be reactive with sodium tetraborate. Soft napkins are needed, they must be torn finely for the best dissolution in the base.

Proven recipe

• 5 tbsp. l. silicate glue,
• 5 tbsp. l. shredded paper napkins,
• 2-3 drops of food pigment,
• 4-5 drops of sodium tetraborate.

Cooking method

1. The required amount of glue is measured and placed in a bowl.
2. You can immediately add dye to the first component so that the color of the slime is more uniform in the future.
3. Crushed napkins are placed in the glue.
4. The composition must be kneaded until the paper pieces are dissolved.
5. Now it's time to add the activator - undiluted sodium tetraborate.
6. The mass is stirred with a spatula so that it curls up and does not stick to the dishes.
7. After that, kneading should be continued with your hands.

Soda slime

Our kids, like their parents, are close to paper crafts, but in this case we must disappoint you. The composition for making slime does not contain a paper base. But don't worry about this. There is an exit.We will try to give a description of the recipe, in which we will talk about how you can make slime at home, using only soda.

This will require the following components:

• PVA glue -50gr.
• Water -100gr.
• Soda 1 tbsp.
• Gouache.
• Wand.
• Capacity.

Mix water and glue to obtain the desired viscosity of the toy. It is best to do this in a plastic container. Feel free to add dye to the resulting mixture. Make the next solution based on water and soda. Combine the two solutions and mix with a stick until smooth. Here is a slime for you! He will bring a lot of positive emotions to your baby.

PVA-based starch slime

For this soft stretching handgum, certain rules must be followed:

take fresh glue and better white, thick

Freshness is an important condition, since after long-term storage the liquid can stratify, which is not important for direct use, but it is decisive for creating a stretching mass;
starch should be found in a household chemicals store on the powder shelf. A liquid concentrate is required, which is used for washing clothes

If you can't find it, you can cook it yourself from 1 part starch and 2 parts water;
choose a dense bag for mixing, as it will wrinkle well and preferably with a zip-fastener.

If everything is ready, then we proceed:

1. Pour 70 ml of starch and 2-3 drops of dye into the bag. You can start with 1 drop, because if you overdo it, the mucus will paint your hands.
2. Spread the glue well and measure 25 ml into a bag.
3. Close zip closure or tie tightly. Knead the mixture thoroughly until it thickens.
4. In this case, a small amount of liquid will go away, which must be drained, and the slime is dried on a paper towel.

Store in a tightly closed container for a week. Be sure to wash your hands after playing.

What to do if the slime does not work

There are times when self-preparation of slime does not give the desired result.

It is important to understand that the following factors influence the final result:

• The quality of the materials used;
• Compliance with proportions;
• Step by step actions.

If the slime has turned out, then its mass will be homogeneous, uniform and easily accessible from the container.

If the slime is not homogeneous, then it is possible to save it by continuing to actively knead it until it acquires the necessary ductility and uniformity.

If the slime is very sticky and stretches after the spoon like cobweb threads, then you can try adding a little liquid starch or water, depending on the recipe. This will liquefy the consistency.

But if there is viscosity, but the slime simply slides off the hands without sticking to them, then it means there is an excess liquid content in it. In order to get rid of it, it is necessary to drain these surpluses, but you can add the necessary binder according to the recipe (glue, boron solution, flour). Mix everything again well.

From toilet paper

The film mask used in the recipe should contain polyvinyl alcohol. Any dishwashing detergent is suitable. Soda can be added all at once, and it is better to pour Naphtizin in portions. In the process of adding activating drops, the mass is kneaded.

What you need for slime

• 4-5 st. l. scraps of two-layer toilet paper,
• 3 tbsp. l. film masks,
• 1.5-2 tbsp. l. dishwashing detergents,
• 2 pinches of baking soda
• 0.5-1 tsp drops of Naphthyzin.

Cooking method

1. The main component must be crushed and put into a container.
2. It is poured with dishwashing liquid.
3. Stir everything so that the composition becomes homogeneous.
4. You need to pour soda into it.
5. The thick liquid is mixed well again.
6. Then Naphtizin is added to it.
7. After mixing, the composition must be supplemented with a film mask.
8. In the mass, you need to work with a spatula until it stops sticking to the dishes.
9. It remains to knead it in your hands to completely get rid of the stickiness.

Watch this video on how to make toilet paper slime at home:

How to make slime with guar gum

Don't be intimidated by this name. Guar gum is a food additive that is used in cooking as a thickening agent. You can buy it at a pastry shop. To make a slime, we need:

• Baking soda.
• Guar gum.
• Contact lens fluid.

How to cook:

• Pour water into a bowl. The size of the hand gum depends on its quantity.
• Add guar gum. To avoid lumps, it is better to do this through a fine sieve.
• Stir everything well and filter through a sieve to get rid of lumps.
• Dyes can be added at this stage.
• Pour in the contact lens product about two to three tablespoons.
• Pour soda about two to three tablespoons.
• Mix everything again and knead in hands for five to seven minutes. All is ready!

We recommend watching the video:

Toothpaste slime

You can make a slime from regular toothpaste. There are many recipes, but we will look at two ways.

No. 1 on a water bath

1. Squeeze out the amount of any toothpaste into a bowl.
2. Put a pan with water on the stove and wait for the liquid to boil.
3. Put a bowl of pasta in a water bath.
4. Cook for 15 minutes, with the toothpaste constantly stirring.
5. As a result, a dry, non-flowing mass should be obtained. Leave it to cool completely.
6. Lubricate your hands with vegetable oil and knead the slime for a few minutes.
7. After such procedures, the slime should stretch well, become elastic, but not tear.

The whole process took about 20 minutes.

No. 2 in the microwave

1. Put the bowl of toothpaste in the microwave for about 2 minutes.
2. Remove plate, mix thoroughly, and microwave again for 3 minutes.
3. The result should be a dry and wrinkled mass.
4. Apply cosmetic oil to the slime and wrinkle thoroughly.

If necessary, glitter can be added to the mass, which the girls will really like.

How to make a slime from PVA glue

In a house where there are small children, finding PVA glue is not a problem. But besides the applique, it is also useful for creating a slime. The main thing is that it is not "stagnant".

Ingredients:

• PVA glue - 1-2 tbsp. l .;
• water - 150 ml;
• salt - 3 tsp;
• glass container.

If you want to make a colored slime, then you will also need food coloring (1/3 tsp) for these components.

Preparation method:

1. Hot water is poured into the dishes and salt is added, after which everything is stirred well. It is best to use fine salt as it dissolves quickly and well.
2. Further, while stirring the liquid, a dye is added to it. By the way, if it is not at hand, then you can use ordinary gouache (1 tsp).
3. As soon as the water cools down a little, all the glue is poured into it without stirring and left for 20 minutes.
4. After the specified time, the mass is slowly kneaded with a tablespoon. This process will cause the glue to gradually separate from the water, while its consistency will just begin to gain the desired appearance.
5. As soon as all the substance has gathered around the spoon, you can pick it up.

The proposed version of the slime will have a somewhat stiff consistency. But if you want to make a softer version of slim, then you should use the following recipe.

Is it a good idea to make a shampoo slime

Definitely yes! We have prepared some options for you.

We make from shampoo and table salt.

Quite a simple and working recipe, we recommend taking:

• liquid soap - 3 tsp;
• table salt - 1⁄2-1 tsp.

The volumes may be different, the proportion is 6: 1, that is, for 100 ml of liquid soap, you will need to take about 3 teaspoon of salt.

How to cook:

Stir the liquid soap with literally a pinch of salt, stir until the mixture comes out homogeneous.

Add more salt and stir until dissolved.

When the mixture begins to thicken, set it to cool for 15-20 minutes. The cooled mass can already be played.

No salt idea

We only need shampoo or shower gel and a little oil (you can take any).

How to cook:

We pour the shampoo into a container that is suitable for heat treatment.

We begin to evaporate it on the stove for about 2-3 minutes, while stirring at the same time. Can be evaporated in microwave for 20 seconds. It is required to wait for the substance to cool slightly, sending it to cool. To prevent the slime from sticking to your palms, you can slightly grease it with the selected oil!

Video: "Unusual and beautiful Lizuny"

How to make a slime at home and what is needed for this?

Making a slime at home is not at all a difficult task. A homemade version of a cartoon character, it will not glow in the dark like a real one, but it will spread, stick, change its shape. There are many options for creating this unpretentious toy, as well as the variety of materials for its manufacture: for example, chewing gum, starch with water, glue, flour, gouache, alcohol, some even use condensed milk if they want to make an edible toy.

You can choose a variety of colors using food coloring or, for example, gouache.

All you need is to prepare the necessary materials in advance, choose a method according to which you will act and enjoy the very process of creating a slime. It is very interesting, even if you have no children, and you grew up long ago from childhood.

To extend the life of the product and give your child joy from the game, learn the following points: the necessary condition for storing the toy is a closed container (for example, a small jar with a tight-fitting lid); do not leave the slime in the open sun, on heating devices, batteries: he loves coolness; you should not put the toy on fleecy surfaces, for example, carpet, clothes, because micro hairs will stick to it, and you will get a non-uniform surface; To make the toy original, use essential oils during manufacturing, which will give a pleasant aroma to the craft.

How to make slime from sodium tetraborate?

Not as difficult as it might seem at first glance. In order to make an almost factory slime at home, you will need:

• borax - half a teaspoon;
• silicate glue (aka clerical) - 30 g;
• food dyes (preferably green and yellow);
• water - about 225-250 ml.

First you need to take two bowls or jars with wide necks. In one of them, dilute the borax with warm water. The liquid will need one cup (approximately 150 ml).

It is necessary to achieve complete dissolution of the powder. In the second, mix the glue with half a cup (75 ml) of warm water again and add the dyes.

A combination of 5 drops of yellow and 2 drops of green is considered optimal. Stir the mixture in the second container very carefully, until a homogeneous mass is formed.

In order to avoid unnecessary questions, it is worth recalling that this "recipe" uses clerical glue, ie. this is a way to make a slime without PVA glue.

It remains to carefully pour the borax solution from the first into the second container. As a result of a chemical reaction, the mixture will begin to thicken before our eyes, turning into a viscous mass.

So we got a classic slime. Well, if something is not clear in this description, then you can always watch a video on how to make a slime.

Of course, when giving a toy to a child, you need to warn him (or better watch out) so that he does not pull it into his mouth. To store such a slime, however, like all similar substances, it is necessary in a closed container. Although this slime is as close as possible in composition to the store, it is no better and no worse than those that are made at home in other ways. So below will be presented a few more options on how to make a slime without tetraborate.

How to make yourself a slime from sugar

Sugar, like salt, can be found in any home. The next method will create a transparent slime. True, provided that no dye is used.

The two main ingredients are 2 tsp. sugar for 5 tbsp. l. thick shampoo.If you want to get a transparent slime, then you should choose a shampoo of the same color.

The preparation is very simple:

1. The two main components are mixed well in a cup.
2. After which it is tightly closed, for which you can use cellophane and an elastic band.
3. The container is placed in the refrigerator for 48 hours.
4. As they pass, the toy is ready to use.

Sugar-made slim is also sensitive to temperature, so it is best to keep it refrigerated.

We also recommend:

Autism in children
Twins and twins
Pregnancy weight
Gas in a newborn
Hyperactivity in children
Hypertonicity in a child
Wooden Toys
Childhood aggression
Kids skirt
Baby rattles
Children's haircuts
Charging for children
Bath toys
How to bathe a child
How to name a child
How to equip a nursery
How to swaddle a baby
How to make a slime
When to baptize a child
When to give birth to a second
Matinee suit
Sweatshirt for girls
Barbie dolls
Musical toys
Beginning of pregnancy
The norm of the child's weight
First pregnancy
Transitional age
Flat feet in children
Crafts to school
Cut baby
Late pregnancy
Baby gender
Developing rugs
Baby bites
Fairy tales for children
Slings
Mixed feeding
Newborn sleep
Hobby for children
Walkers for children
How to keep your child busy

What is a slime?

Slime, or slime, is a soft, pliable, non-tearing substance that is pleasant to the touch. It is usually used as a relaxing trinket that kids and even adults alike will love. It can take any shape, be elastic or flowable, and has an anti-stress effect due to its pleasant consistency.

Such a trinket is difficult to spoil, it does not stain children's hands and clothes, and in the common people it is called "chewing gum for hands" or handgam. Slime was originally released by Mattel in 1976 and has since gained popularity.

Making a slime with your own hands is not at all difficult. There are many ways to cook with food, many of which are found in every home. It should be understood that we are making entertainment for children, so this craft should be harmless.

Now that we have learned what a slime is, and what properties it has, we will understand in detail what the product contains.

Creative toy, unusual magnetic slime

• The option is not very different from the previous methods, with only one highlight.
• What we take:
• Any household glue - one tube;
• water;
• borax;
• iron oxide or metal shavings

What to do:

Mix water and glue in equal proportions. We dilute borax in a separate container by adding half a teaspoon of solvent to two tablespoons of liquid. Pour the solution into the glue little by little, stirring vigorously.

When the mass thickens, add iron oxide. In the absence of iron oxide, we use shavings, because it is easy to do it yourself: you can rub a metal plate with a file. By increasing the amount of shavings, we increase the magnetic properties of the slime.

From paper

For this method, in addition to soft napkins, toilet paper, disposable towels are suitable. It is better to take a thick shampoo, and a transparent or black film mask, but with Polyvinyl Alcohol in the composition. You can take a cheap solution for lenses, such as Licosol or Optimed, as long as the product contains borates.

Ingredients

• 3 tbsp. l. shampoo,
• 4-5 st. l. pieces of paper napkins,
• 2 tbsp. l. film masks,
• 0.5 tsp lens fluids,
• 1 pinch of baking soda
• 2-3 drops of acrylic paint.

Making slime at home

1. Shampoo is poured first into the cup where everything will be mixed.
2. You need to throw small pieces of paper napkin into it.
3. The ingredients must be combined using a spoon, and then send this dish to the refrigerator for 15 minutes.
4. A film mask is added to the homogeneous mass.
5. Use the dye immediately and mix the ingredients again.
6. The next step is to add the lens fluid.
7. After a short stirring, add soda.
8. Now in the mass it is necessary to work thoroughly with a spoon until the composition becomes denser.
9. Stirring the slime lagging behind the dishes is continued with your hands.

See in this video on how to make a paper slime with your own hands:

Making a toy from simple ingredients

In order for the slime to turn out one to one, like from a store, you will need to look at the pharmacy for the main component - sodium tetraborate. Another common name for the drug is borax. This antiseptic is required in small quantities - only 0.5 teaspoon. And you will also need:

• two small vessels;
• 1.5 cups of water;
• food coloring (for example, from the Easter egg coloring kit);
• 30 g of glue (transparent stationery is best).

Further, almost all recipes on how to make slime are recommended:

• We slightly heat water in the amount of 1 cup so that its temperature fluctuates in the range from 30 to 36 ° C.
• Pour the liquid into one of the bowls, add borax.
• Mix thoroughly to achieve a uniform consistency.
• In the second vessel, we combine the remaining liquids: 0.5 tbsp. water, glue. Add a little coloring composition there. Mix.
• Carefully, in a thin stream, pour water with borax into another container.

Plasticine handgum

The best recipes for making slime are recipes without sodium tetraborate solution. The use of improvised materials, plasticine or paper, often inspires the confidence of parents, moreover, kids are familiar with crafts based on these materials.

To make a plasticine slime, you need the following components:

• Gelatin -1 p.
• Plasticine.
• Water.
• Plastic cup or glass.
• Metal container.
• Stirring spoon.

Stir a bag of gelatin in cold water, leave the container alone for a while to completely dissolve the gelatin. Bring the resulting mass to a boil. Knead the plasticine of the color you like in your hands.

Add water to a plastic container and mix with plasticine. Add gelatin to the resulting homogeneous mass and mix with a spoon. The resulting slime can be played immediately after it cools down. This method is the simplest and contains components familiar to the baby. When using this recipe for making slime, you can easily do without adding harmful substances to the toy.