Glitter slime: 4 recipes for making a glitter slime at home

What ingredients are needed for a slime?

Glitter Slime is a shiny slime. From a distance it seems that it is strewn with precious stones. To make a toy, you will need small sparkles for needlework, manicure, paper crafts. Glitter is sold in stationery stores, in cosmetics departments.

Beginner slimers should remember: not every kind of glitter is suitable for a sparkling handgam. Do not put any jewelry in the slime formula. They are too large, with sharp edges; when kneading the mass, they can cut the skin. Use only fine glitter. It is best if they are mixed with a gel base, which allows them to be evenly distributed over the slime.

In addition to glitter, you will need the main components and an activator:

• stationery glue (preferably silicate);
• detergents (shower gel, liquid detergent, dishwashing detergent);
• shaving foam;
• sodium tetraborate;
• soda, salt, sugar;
• lens fluid;
• mask-film and others.

This list can be continued depending on the result that the slider wants to get. If you use silicate glue, the handgam comes out translucent, similar to space. From PVA, slime turns out to be less attractive, matte, but also beautiful.

When choosing a glitter slime recipe, think about the result. Give preference to formulations of components that are found in the house, will be non-toxic and will not harm your health.

To make the shiny slime come out viscous, elastic, follow the recommendations:

• Use sodium tetraborate as an activator. It thickens well. But you need to add it drop by drop so as not to overgrow the mixture, otherwise the slime will come out tight.
• Use food or acrylic dyes to make colored slimes. They are bright, keep the shade well.
• Transparent slime comes out of silicate glue, it looks more spectacular. Matte slime is obtained from PVA.
• Reduce toxic ingredients. Slime is easy to make without glue, tetraborate, replacing them with available safe components (shampoo, soda).
• If the product is liquid, it contains excess moisture. Adding table salt will help get rid of it.
• If during storage the slime has lost its elasticity, place it in water for 2-3 hours.

Clay Moment: Crystal / Joiner (5 recipes)

There are many types of glue under the Moment brand, but the following are suitable for slimes:

Any of these can be bought at building materials stores or supermarkets. The moment does not contain toxic substances, but due to the smell when working with it, headache and nausea may occur.

1.From Moment Crystal and Dishwashing Gel

The slime, created from the proposed components, stretches well, but does not "click". It turns out to be small and soft, the smell does not disappear after production.

How to make a slime

1. Pour dish detergent into a cup.
2. Add glue to it.
3. Stir the mass until thickened.
4. Remove the formed slime from the gel and wrinkle it in your fingers.

2. From glue moment and water

This slime is best done in the air, as the main ingredient has a strong chemical odor. The toy turns out to be well-stretched and bulky. It takes a long time to knead.

Do it yourself

1. Squeeze the glue into the water poured into the dish.
2. Stir the liquid until the product coagulates.
3. Without getting out of the water, rub with your fingers for 10 minutes.
4. Remove from the liquid and knead in your hands until it lags behind the skin.

Watch this video on how to make slime from glue.Moment:

3. From Moment Joiner and sodium tetraborate

In this way, a classic soft slime is prepared. That is, it stretches and claps perfectly. The toy can be decorated as you like.

Ingredients

• 80 ml white glue Moment Joiner,
• 1 tbsp. l. hand creams,
• 6-7 st. l. shaving foam,
• 1-2 tsp an aqueous solution of sodium tetraborate.

How to make slime

1. Add hand cream to the glue placed in the bowl, stir.
2. Add shaving foam to the composition, and work with a spatula.
3. Pour in sodium tetraborate.
4. Knead the mass with a spatula and hands.

Watch this video on how to make slime from glue Moment "Joiner":

4. From the Moment Joiner with Teymurov's spray

According to the recipe, a very delicate, flowing slime is obtained. It can be stretched to a film, blowing bubbles, twirling with a rose.

How to cook at home

1. Pour the glue into the dishes.
2. Start kneading with a spoon, adding Teymurov's spray several times.
3. When the mass is compacted, work with it with your hands.
4. Paint the slime.

5. Out of the Moment Carpenter and Shaving Foam

Slime comes out loudly clattering to bubbles. The slime is so soft that it can be used to draw patterns on the table.

How to make

1. Mix the glue with water.
2. Touch up the liquid.
3. Top it up with shaving foam.
4. Stir until thick.

Watch this video on how to make a slime from shaving foam and glue Moment Joiner:

From the film mask

For this recipe, you need a transparent film mask, not a black one, otherwise the slime will turn out to be a galaxy. You can make it softer, more fluid, if you reduce the volume of the thickener. The latter is prepared from 2 tsp. sodium tetraborate and 200 ml of warm water.

Proven recipe

• 75 ml film mask,
• 2 tbsp. l. water,
• 0.5 tsp toothpaste,
• 1 pinch of baking soda
• 5-6 drops of dye
• 5-6 drops of sodium tetraborate solution,
• 3-4 tsp sequin, you can have different colors.

How to make glitter slime at home

1. The contents of the tube are squeezed into a clean dish.
2. To keep the slime cool, add half the specified amount of water.
3. Shake the liquid for 1-2 minutes.
4. In another container, mix the toothpaste and the remaining volume of water.
5. Close this dish and shake it well so that the contents come out of foam.
6. The foam is sent to a cup with a film mask.
7. After thorough stirring, soda is added to the liquid.
8. Now you can tint it.
9. Then it's time to add an aqueous solution of sodium tetraborate.
10. The mass is kneaded with a spoon.
11. When it curls up, wash the base with your hands.
12. Sparkles are poured onto it.
13. After kneading and mixing the sparkling grains into the mass of slimes, it is ready.

We recommend reading about how to make a glossy slime. From the article you will learn how to make 8 glossy slimes from PVA glue, stationery glue, water, sodium tetraborate and shaving foam.

And here is more about how to make a transparent clear slime.

Glitter slime is especially popular with children, because it looks luxurious and does not lose its beauty after playing with it. Making a toy is easy too. All you need is a transparent or colored base and a lot of shiny particles.

Be sure to watch the video on how to make a fire glitter slime:

Main ingredients

Children love everything shiny. But they are also crazy about slimes. Why not combine these two sympathies and make a shiny slime yourself? This does not require expensive components. You can buy glitter slime, but it's easier to make it yourself.

Ever wondered why children like glitter slime more? There are a number of psychological explanations for this:

• brighter, more attractive;
• shimmers and soothes the nervous system;
• looks presentable, more expensive, perceived as an elite toy;
• you are not ashamed to boast of a brilliant slime in front of your friends, thereby increasing your status.

The main component of the handgam is glitter or glitter gel. It is sold in toy or stationery stores, comes in different shades, and is inexpensive. If you can't get glitter, use dry glitter. They are mixed into the main composition, achieving uniform distribution in the mass.

In addition to glitter, the following are involved in the manufacture of slime:

• glue;
• detergents;
• cosmetic components (creams, foams, lotions);
• activators (borax, washing gel, hair balm, etc.);
• air plasticine;
• soda, salt, powdered sugar.

Whichever components you choose, sparkles will perfectly complement the composition. They combine well with glue, adhere to it and are evenly distributed over the surface of the slime.

Notice how the glitter slime shimmers in the light. Every kid will want to get such a toy.

Without tetraborate

With this method of creating slime glitter, the activator is added in portions. Percil does not stabilize the glue as quickly as tetraborate, so there is a risk of pouring in too much gel and getting a tight mass. Sequins should be chosen to match the color of the base, that is, white, silver or green, like a thickening gel.

Cooking method

1. Pour the glue into a container.
2. After stirring, add Persil to it.
3. In the liquid, work with a spoon until curdling.
4. Then the mass is necessarily kneaded in the hands so that it sticks and does not spread.
5. The base is ready, and decor is added to it.
6. Knead the mass again with your hands.