Butter Slime: 10 Best Homemade Recipes

What is butter slime, what does it look like

Butter slime

Butter slime (from the English "butter" - butter) - a kind of slime, reminiscent of slightly melted butter. Its main feature is the ability to smear on absolutely any smooth surface without sticking or tearing. It is quite dense, but at the same time velvety and delicate in texture. Air plasticine or soft clay gives such properties to the slime.

Note! Another of its characteristic individual properties is sizl (from the English "sizzle" - hiss)

You can hear hiss if the toy is stretched several times.

Butter slime resembles soft butter

Tips & Tricks

Handling the toy correctly will increase its lifespan. No need to throw a slime in the sand, on the road, on the grass. It is forbidden to give the product to children under 3 years of age. If a slime is made using borax, then this can cause poisoning.

When preparing a toy, it is better to do it with rubber gloves. After work and playing with a slime, they always wash their hands with soap.

If the toffee is covered with mold, then you need to get rid of it.

It is advised not to use a slime for a long time. As soon as it becomes very dirty or starts to crumble, it is better to prepare a new toy. For elasticity, it is worth feeding the slime with water, drop by drop daily. You must remember to leave the toy alone for a while. So, after lying in a cool and dark place, it will quickly return to its normal state.

Share link:

Why is glue added to the butter slime?

The classic slime recipe includes glue and sodium tetraborate. When these components interact, a chemical reaction occurs, as a result of which an elastic elastic mass is formed. Air plasticine, special clay, film mask and other components add softness and oily sheen to it.

How to make a butter slime with glue according to the classic recipe:

Squeeze 100 ml of gel toothpaste into a bowl.
Add 100 ml of thick washing gel.
Squeeze out 100 ml of PVA glue.
Mix the ingredients thoroughly.
In a separate container, make an aqueous solution of sodium tetraborate (30 ml per 100 ml).
Slowly add the activator to the mixture until it thickens.
Knead the slime butter with your hands.

For children's creativity, it is better to use silicate glue, PVA, glue stick. They do not emit harmful vapors, do not irritate the skin of the hands, and at the same time have an affordable price.

How to prevent the slime from hardening?

When making slime, add the activator drop by drop. An excess of the substance negatively affects the consistency of the slime. The kneading process promotes thickening, due to which the toy loses its elasticity.

Use fresh ingredients. If you add dried plasticine or other elements to the composition during manufacture, the slime will harden faster.

To prevent the slime from hardening, you need to store it correctly. Follow a few simple rules:

Store the product in the refrigerator in an airtight container (container or bag).
Add 1 tsp every 2-3 days. salted water to "feed" the slime.
You should not "feed" the toy with flour or starch. When dry, these substances harden quickly.

How to soften butter slime - watch the video:

There are many ways to soften butter slime. One of them will surely help rehabilitate the toy.

Proceed carefully and according to the instructions: then the product will become elastic again

Ingredients for making slime

Flour is a food product obtained by grinding various grain crops. In cooking, this product is well known as a base for baking. And those who have kneaded the dough at least once will guess how to make the simplest slime from flour and water.

Since the white airy powder is made from milled grains, it contains vegetable protein. It is this protein, when combined with water, forms a thick mass - gluten. The ability to absorb moisture in cooking has been called the water-holding capacity of flour. It is she who affects how much water needs to be added to the dough. But this property also makes the product suitable for sliding.

To make slime from flour, liquid ingredients are added to the powder composition, and then kneaded well. The food product "takes" excess moisture, giving out thick gluten. At the same time, it should be noted that the moisture content of flour depends on a number of factors: the type of plant and the conditions for its cultivation, the method of processing grain, the degree of grinding, and others.

According to the degree of moisture content, two types of flour are distinguished:

Strong - the powder is able to absorb more water, but the gluten remains elastic. Accordingly, such a slime made of flour and water will more resemble hendgs, since the volume of gluten does not stretch well.
Weak - in this case, very little water is required, and the gluten is more elastic, the cooked slime can be stretched a little.

The difficulty lies in the fact that before you start making slime out of flour and water, you will not be able to find out what type of food product belongs to.

Note! The moisture content of a food product may differ even if it is obtained from the same plant species, such as wheat. This is due to the different growing conditions of the plant and the processing technology of the food product.

The difference is felt even in recipes that do not require strict proportionality.

There is a wide variety of slimes. It will not work to completely replicate industrial textures using food, but experimenters are actively trying to do it. The easiest way to make slime from flour and water is to mix the two. The resulting mass will slightly resemble handgams - it crumples pleasantly and crumbles through your fingers.

Also, the slimers have developed a number of flour slime recipes that bring the consistency of home antistress as close as possible to the purchased one. The following can be used as auxiliary components:

Adhesives and thickeners. They are the basis for the original textures. Such slimes stretch well, wrinkle. Flour in this case acts as an additional thickener and adds crunch to the toy.
Shampoo. It is used to make the composition slightly airier and more elastic. Shampoo will not help to completely recreate the texture of the "gum", but the dough mixture can still be stretched a little.
Toothpaste. The agent in flour and water slime recipes is added for airiness and porosity in the texture. Toothpaste formulations are unusual to the touch and smell refreshing.
Liquid soap. Forms a stretchy substance that also smells very pleasant.

Among the recommendations on how to make a slime from flour, there are even suggestions to add a food product to gouache or use baby oil. You should not blindly trust such advice, because you can simply spoil the ingredients, but do not stop yourself from experimenting. Do not forget that flour turns into a paste upon contact with water, which means that one of the additional ingredients should contain at least a little liquid.

Note! If in classic glue recipes a thickener is added a little, and the base is a mass liquid in consistency, then in most combinations with flour, the powder is both the base ingredient and the thickener, which must be transformed into a semi-liquid slime substance.

What is Butter Slime at home?

Butter Slime is one of the varieties of anti-stress toys for children in the form of a jelly-like viscous paste. Butter in English means butter, buttery. Shop or homemade slime has the appropriate texture.It feels like a tender marshmallow or marshmallow. The soft, delicate and airy structure, like butter, is easily spread in a thin layer over the surface and hands.

In appearance, the slime made of sodium tetraborate resembles a cud. Depending on how you make the Butter, it can have a glossy, velor or matte look.

The quality of a homemade slime is checked using a small test. Smear the paste with a plastic knife, spatula or handle from a spoon on a flat surface, just like an butter sandwich, then carefully separate the layer from the surface. If the layer separates well and stretches, the dough is good.

What to do if hendgam does not work?

Sometimes users do everything strictly according to the recipe, but the slime does not work.

Pay attention to common mistakes, knowledge of which will prevent damage to components:

If at first the slime turned out, but after a couple of days it began to stale and dry out, it is stored incorrectly. Place it in an airtight container and refrigerate.
When the handgam comes out too sticky, add an activator to it: starch, tetraborate or a washing gel. It is better to use the substance indicated in the recipe.
Too dry, tearing slime, fix it by adding hot water.
Wash your hands before taking the slime. He quickly collects dirt and dust.
The structure of butter slimes is improved by adding airy clay. It is similar in consistency to butter and perfectly complements the composition.
Silicate glue or PVA will help to improve the consistency of the slime, to make it viscous.
Salt water will help soften the slime. To prepare it, mix 100 ml of water with 1 tsp. salt. Immerse the slime in the solution and incubate for 5-10 minutes. Do not overdo it so that the toy does not soften. Mash the slime again. Another option for the procedure is a saline injection using a syringe. The saline solution added to the slime storage container will help extend the life of the anti-stress.

Tips for storing slime are just as important. Do not leave the slime in the sun, near a battery, in a dry room with heating, on fluffy surfaces

Due to the negligence of the kids, the toy becomes unsuitable for play, collects dirt. You have to throw it out and make a new one

How to make butter slime - watch the video:

Slime with oil is an excellent elastic anti-stress that will delight your child. In order for the slime to come out, strictly follow the recipe and mix the composition thoroughly. Impatience and insufficient mixing prevent you from getting a quality toy.

How to make a toy with your own hands

Slime oil has several recipes and each has different ingredients.

Main ingredients

The ingredients of the first "slugs" were gaura gum and borax. Later, John Wright tried to use rubber. Because of this, it turned out to create many other types of slimes.

Now the main components of the slime are PVA glue, an activator (most often sodium tetraborate), light plasticine.

Safety engineering

Important! The entire process of creating a slime must be supervised by an adult, as this will use chemicals. It is necessary to disinfect all instruments, containers after the experiment

It is necessary to disinfect all instruments, containers after the experiment.

After playing, wash your hands thoroughly with soap and water. Last but not least, do not use ingredients that are not listed. Because of them, violent reactions can occur, the consequences of which are injury or death!

What is Butter Slime?

Butter slime is a type of handgum that has a velvety texture that shines with a greasy sheen. Indeed, in translation from English "butter" means "butter". In addition to external similarity, the toy can be smeared on the hands, on the surface of solid objects. Due to its extreme softness, children like to run their fingers into it, make holes, squeeze in their palms.

The soft buttery texture of the butter slime is achieved thanks to the properties of the main component of the toy. The store version uses a special soft clay. At home - airy plasticine, toothpaste, thick cosmetic gel. Remember, the average life of a toy is 10-14 days.

The easiest way

The simplest recipe for Butter Slime is to make a toy without additional thickeners based on 2 ingredients: plasticine and shower gel (10 g).

Do not use ordinary plasticine; light type material is best suited, for example Play-Doh, Crayola, Jovi. It is soft, has an airy structure, easily kneads in the hands and connects well with other components.

In order to make Butter Slime, you need to follow these steps:

Knead 1 portion of plasticine in your hands.
Add a couple of drops of shower gel.
Mix the ingredients thoroughly.

It is necessary to add the gel carefully so as not to overdo it, otherwise the soft toy will not work.

Storage rules

The most basic problems that can arise when making buttor slime:

Slime does not thicken.
The slime does not stretch.
The toy is torn.
The toy has dried up.

Now let's talk about everything in order.

Slime does not thicken if the proportions of the ingredients are violated

If the slime does not thicken

This is due to:

Expired Substances.
Entering into the composition of ingredients of a different consistency.
Violation of the order of actions.
Non-observance of proportions.

For these reasons, butter slime may not thicken. The decision is trite. This is the replacement of substances with a valid expiration date and the desired consistency, as well as compliance with the proportions and procedure.

If the slime oil does not stretch, but tears

This may be due to:

Improper storage.
Lack of certain substances.
The slime has absorbed a lot of specks.

The slime is torn, including due to the presence of debris in the composition

Everything is more complicated here. Most often, the slime does not have enough glue, but it must be added gradually. Further, if it is clogged, then the toy must be heated in the microwave for 1 minute. Then, using tweezers, you need to pull out all the litter. This must be done carefully. After that, place it in the refrigerator for 15-20 minutes. If the slime was stored incorrectly, then it is necessary to place the toy in water, mix, remove and pour soda into it.

If the butter slime is dry

The main reason for this is improper storage. There are some tips that can help soften the butter:

Add some water and stir the bator. It sounds corny, but in some cases it can save the toy.
Add body lotion or antibacterial gel (1 tablespoon) and stir into slime.
If the slime contains glue, then you can add another 1 tbsp. l. of this substance.
You can soften the toy by heating. To do this, it must be left in hot water for a minute or placed in the microwave for 10 seconds.
It may seem that the slime is spreading, but in fact, everything is fine with it.

What if nothing works?

What can you do if you tried so hard and your product did not pass the test? This is so unpleasant, but not at all scary, let me assure you.

Take a close look at your hand gum and assess its position:

If it looks like a jelly-like spreading liquid, then mix the activator into it, and if the one that is required by the recipe runs out, replace it with any of the data: soda, starch, gelatin, salt, flour, lens remover, sodium tetraborate, borax ...
If the slime is too tight, then just place it in a bowl, the bottom of which is slightly covered with water. Roll it in it and knead it. And you can forget about the frustrations about this.

Storage and use at home

When the product is ready, you need to handle it correctly:

keeping the jar closed;
placing in the refrigerator;
without exposing it to the sun.

We must try not to contaminate the product of our hands. When the mass begins to lose elasticity, oils are added to it.Dryness will cause the slime to tear. Water will save the product. But you need to add it a little bit. Excess liquid is removed with table salt. It is enough to throw a few grains on the slime. After sharp shaking, leave the toy to lie down for 2-3 days.

The color of the viscous mass is carried out with food dyes. Do not use chemicals.

You can play with slime using it as an anti-stress. They sculpt from a mass of interesting animals, monsters. You can throw the toy against the wall. It bounces off any surface easily.

It is advised to "draw" patterns on the surface. A useful toy for small children. It will help the development of small finger muscles. This will allow the child to develop better.

Why is oil in a slime?

Traditional slime is made on the basis of glue and sodium tetraborate with a small amount of water. These ingredients are enough to get anti-stress. But slimers regularly adjust handgum recipes, adding new ingredients to them.

Some recipes use oil along with shaving foam and detergents. Children's cosmetics are more often used: it smells good, does not sour. Vegetable oil is added to recipes with starch or flour. Such toys are short-lived, quickly turn sour.

Slime with oil differs in texture from its "brothers". It is more elastic, softer, more pleasant to the touch, slightly shiny and stretches well. But if you just add oil to the borax glue, the slime will not work.

A number of other components will be required to give the slime an optimal consistency:

shaving foam;
shower gel;
creams, body lotions;
liquid soap or dishwashing gel;
soda, salt, sugar;
flour or starch.

Due to the complexity of the composition, it is possible to achieve the optimal consistency of the slime, in which the oil plays an important role.

What is it and what does it look like?

Slime oil has a fairly dense structure, but at the same time it is distinguished by its softness and tenderness. It resembles melted butter. When using the toy, no greasy residue remains from it.

Butter-slime is characterized by strong pliability, it spreads easily over all smooth surfaces, but at the same time it does not tear or stick. This is achieved by adding a special ingredient to the mixture - soft clay. It can be replaced with light plasticine.

The cooking process is as follows: soft clay or plasticine is added to the original slime. After thorough mixing, you get a butter slime.

The properties of the final toy will depend on the amount of ingredients; the more clay in the slime, the more dense it will be. If there is too much of this component in the toy, then it will tear when stretched. Not having enough clay will reduce the density of the slime and make it too sticky.

A variety of this slime is a hissing slime. This sound occurs if the toy is stretched several times and pressed with your fingers. The advantage of Butter Slime is the slow mixing of the layers. This helps to create unusual patterns in the container and keep them for a long time. When choosing shades, it is necessary to consider what color will turn out in the end. You can experiment with a toy by combining several colors.

DIY slimes are gaining popularity nowadays. They are obtained by mixing an original toy and plasticine. They differ in that you first need to make a cute figurine. The craft is laid out on the base and decorated with the help of various additives. At the end, you should have slime butter.

There are various methods of making toys without clay, when starch, baby powder or soap are added to the base.

How to store slime correctly

It is important to learn several important rules and conditions here:

It is necessary to store the slime in an airtight jar or container with a tight-fitting lid.
You should play with slime as often as possible, or at least knead it for a couple of minutes a day.
Also, you can not store the slime in warm places.It is best to keep it in the refrigerator or other cool places.

Store the toy in an airtight container.

Butter Slime or "handgam" (from the English "Hand" - hand and "Gum" - chewing gum) serves as an anti-stress for hands and it is not so difficult to make this toy at home. If you use your imagination and add some decorations, you can get an unusual and interesting toy. At the same time, it is precisely to the bator slime that you should not add large decorations, as they can spoil the texture. It is better to do with small sparkles to give it an unusual iridescence or shine.

Home recipes

You can make a slime that resembles butter using a variety of methods. The manufacturing methods are based on ingredients that help create a creamy texture, making it pliable and soft.

From light (air) plasticine and PVA glue

To get a slime butter, you need to prepare special dishes. Choose a container that is not used for eating. Also, in addition to plasticine, you need to prepare:

packaging of PVA glue;
30 grams of shower gel;
a pinch of baking soda;
sodium tetraborate 10 ml.

First you need to mix the glue with the gel.
Then the dye is added there.
Stir until smooth.
A glass of hot water is poured into another container.
Pour soda there.
The finished solution is poured into the original mixture and at the end sodium tetraborate

It is important to mix the mixture well. After that, plasticine is added

It must be taken as much as the ingredients in the mixture.
Knead the mass so that the toy becomes soft.

From clay

For this recipe, you'll need a clay called Soft Clay. You will need one package, PVA glue will need 500 ml. To dilute the material, you will need 200 ml of water. There you need to add 5 tablespoons of hand cream.

After thorough mixing, add the thickener until the mass is the desired structure, and then the mixture is thoroughly kneaded with the help of hands. The slime will be ready to play when it stops leaving traces.

Shaving foam

This recipe for making slime is quite common. In addition to shaving foam, you will need the following:

200 grams of PVA glue;
2 tablespoons of hand cream;
7 spoons of shaving foam;
3 teaspoons of sodium tetraborate;
20 grams of plasticine.

The cooking procedure is as follows:

glue and hand cream are poured into a bowl, everything is thoroughly mixed;
adding shaving foam;
slowly introduce tetraborate with constant stirring;
if the mixture turns out to be too sticky, then you can add soda;
mix everything well;
then the slime will be ready to play.

How to make without glue?

Glue is not required for making butter slime. It can be substituted for other ingredients. To create a slime without glue you will need:

6 tablespoons of starch;
4 tablespoons of shampoo;
some baby oil;
dye.

Procedure:

Mix starch with shampoo in a container for preparation.
Then baby oil is poured in and everything is thoroughly mixed.
To give the mixture plasticity, more shampoo and oils are added. This is done until the mass is given the desired consistency.
After that, the slime is sprinkled with starch and kneaded well for a few more minutes.

Free of PVA and other thickeners

It is much more difficult to make such a toy, it may not work the first time. It will be needed for manufacturing:

starch;
some body cream;
Toothpaste;
dishwashing liquid.

All components are connected, controlling the amount of starch. The mixture must be kneaded well to obtain a slime of the required consistency.

Sizzling slime

This slime resembles a regular butter slime in texture, but is more airy. To prepare it you will need:

PVA glue;
thickener;
polymer clay;
foam for washing;
shaving foam.

Cooking steps:

glue is poured into the container and mixed with shaving foam;
add a dye;
the thickener is slowly introduced so that the mixture does not harden sharply;
then add clay and foam for washing.

At all stages of preparation, it is necessary to mix the composition well. The end result is a crispy and soft toy.

Sodium tetraborate free

Slime can be prepared without using borax if all the ingredients are mixed well:

take liquid soap and PVA glue in equal proportions;
a mute toothpaste is added to them;
add a pinch of baking soda.

The finished mass is spread on a board and kneaded with hands until the slime stops sticking to the hands.

From plasticine and boric acid

Slimes made according to this recipe resemble store counterparts. You will need the following ingredients:

PVA glue 100 grams;
shower gel 30 grams;
baking soda 5 grams;
a glass of hot water;
boric acid 2 teaspoons

Boric acid is available over the counter as an alcohol solution. Slime is prepared according to the following algorithm:

In a plastic container, mix the glue and shower gel with constant stirring.
Color can be added if desired.
A solution of soda is prepared in a separate container. For this, soda is diluted in hot water.
The solution is poured into the first mixture.
Boric acid is poured in with constant stirring.
After thickening, the slime is ready for play.

Slime on an adhesive basis

In the manufacturing process, we need the following ingredients:

water;
PVA glue;
dye;
sodium tetraborate.

Water is taken from the tap, PVA is bought at a hardware store, ordinary gouache can be used as a dye. The last component is sodium tetraborate, sold in pharmacies. Any concentration can be used.

A step-by-step recipe for bator slime looks like this:

Any container is taken in which PVA and sodium tetraborate are mixed to a state of density.
To improve the consistency, soda is added and the mixture is re-stirred. You can skip this step.
The final touch is the addition of the dye.

If the color of the toy is boring or you don't like it, you can rinse it in water and paint it again.

Heat exposure

The slime butter contains air plasticine. The dried substance becomes soft when warmed.

There are ways how to act with heat on a slime:

Boiling water. Pour 1/4 cup boiling water into a bowl. Dip the slime into it and cover with a lid for 10 minutes. Take out the toy and knead it with your hands. The recipe is suitable for a slightly dried product.
Microwave. If the slime is dry, try heating it in the microwave. Place the toy on a plastic plate, place it in the microwave and turn it on for 40 seconds. When the slime softens, knead it with your hands, without waiting for it to cool.
Boiling water with boric acid. For a way to soften a butter slime, you need boiling water and boric acid. If a lot of water is added during the manufacture of the slime, when the toy dries, it stands out, and the slime hardens. To make the product last, mix 50 ml of boiling water in a bowl with 0.5 tsp. toothpaste. Dip the slime into the mixture and knead until the paste is absorbed. To prevent the toy from sticking to your hands, add 10-15 ml of boric acid and stir.
Boiling water with shower gel. Mix 100 ml of boiling water and 10 ml of shower gel in a bowl. Dip the slime in the mixture and wait for it to swell. Transfer the slime to a dry container and blot with napkins. It has softened, but it sticks to your hands. To avoid this, add 1 tsp. boric acid. If the slime remains liquid, dilute with 1 tsp. soda in 100 ml of water and add 15 ml of solution to the slime. Mash up the toy.

The use of heat gives excellent results. Plasticine in the composition of the product softens under the influence of heat or moisture. The main thing is not to be zealous so that the slime does not turn into a shapeless mass.