How to make bubbly slime - free mp3 download

Crunchy crunchy slime like on instagram

A very easy slime crunch recipe. The source of the crunch here will be ball plasticine - a material for modeling, consisting of foam balls bound by a substance based on glycerin.

Crumble 1 bag of ball plasticine into a bowl.
Pour in 30-35 ml of thick, transparent office glue.
Spray Teymurov's foot spray several times into a bowl and knead the slime with your hands, having previously moistened them with the same spray.

Many recipes for crispy slimes use PVA glue.

It is important that it is fresh, but so does the brand. Experts say that the thick Carpenter showed himself best of all

But there are different reviews about the Luch brand. Sometimes a slime made on the basis of PVA Beam glue does not stretch well and breaks.

From gum and water

This recipe should use glazed gum - Orbit, Dirol and the like. An ordinary one, like Love is…, in such an amount of hot liquid it will spread and the slime will not work.

How to do it yourself

The main component must be poured into a deep bowl.
Then hot water is poured into it.
Stir the ingredients until the pads soften and the liquid cools down to a warm state.
The chewing gum should be kneaded with your hands to form a lump.
It is washed under running warm water to get rid of excess sugar.
Then a dye must be applied to the surface of the base.
Knead the mass again until a uniform shade.

How to make slime out of hand gum

With this method, you can limit yourself to performing 4 stages, after which the slime will be ready, it is quite possible to play with it. It turns out to be stretching without breaks, soft, although it changes color. But to make the toy more interesting, you should also use ball plasticine. This component is taken in less quantity than the resulting base.

Cooking method

Hand gum must be kneaded and toothpaste squeezed onto its surface.
The components are mixed by hand.
Then, shaving foam is added to the renewed and softened slime.
The mass is stirred again until a homogeneous texture.
You can also attach ball plasticine to it.
The components are mixed, once again thoroughly kneading the slime.

We recommend reading about how to make a bubble-shaped bubble slime. From the article you will learn about recipes for bubble slime made from PVA glue, stationery and silicate glue, water and starch.

And here is more about how to make slime at home.

Chewing gum slimes, of course, are not comparable in quality to toys based on glue or film mask. In addition, they dry quickly, even if they just lie in a jar under the lid, and are not used for playing. But such a slime is not difficult to restore by adding a few more liquid ingredients. The advantage of the toy is the availability and safety of its components.

Watch this video how to make hand gum slime:

Dirol chewing gum

At the first stage of making this slime, the water should be very hot, almost boiling water. When it comes time to knead the gum, you need to first make sure the liquid is cool enough. So it may take a little over 10 minutes for the records to soak.

Cooking method

Hot water is poured into a mixing cup.
Dirol's pads are poured into it.
They should be allowed to soak in the liquid for at least 10 minutes.
Then knead the gum with your hands, dipping it in slightly cooled water from time to time.
When the mass becomes homogeneous, it can be colored.

Orbit chewing gum

This recipe is not difficult, but it will take time and effort, since the gum is hard to knead.

It is also important to be careful during the 2nd stage of the process, because the gum removed from the microwave will be hot.And do not overdo it with foam, from its excess, the slime can become sticky.

How to make at home

Pour the chewing gum into a heat-resistant container, free from the packaging.
It is sent to the microwave for 1 minute.
When the pads are warmed up and softened, you need to knead them with your hands until they are united into one whole.
Then, shaving foam is added in portions to the formed lump of gum.
The mass is kneaded each time until it softens even more, until a slime is obtained.

See in this video how to make a slime from Orbit gum with your own hands:

Fluffy fluffy slime with glitter and balls

The recipe is fine if you are ready to make a more complex variation.

It is important to exactly observe the proportions indicated below, then the result will not be long in coming.

The following ingredients are required: two cups of glue, boric acid salt (Borax), balls, glitter, paint, aftershave cream, a glass of water plus an additional ¼ glass of heated liquid, boric acid lens material.

The recipe will require you to do a number of actions.

Dissolve ¾ tsp. Borax in a quarter glass of boiled water. Knead until all ingredients are dissolved.
Add two tbsp. l. contact lens solution.
In another bowl, knead the glue and water - gradually the consistency will become completely smooth - add more glue if necessary.
Decorate with balls, sparkles, dye.
We measure out 8 cups of shaving emulsion and mix it with the glue mixture. We bring to a homogeneous state.
Add the prepared mixture from Borax, contact solution and water. Mix everything thoroughly to get a marshmallow consistency - Fluffy slime is ready.

From office glue

You can use liquid soap or dishwashing gel or bubble bath instead of shampoo in the recipe. And baby oil is replaced with glycerin, which is easy to buy at the pharmacy. You can also use another thickener. The main thing is that there is not too much of it, and all the proportions of the components are preserved. Another condition is thick glue.

What you need for a bubble slime

40 ml of stationery glue,
4 tsp water,
1 tsp shampoo,
1 tsp baby oil,
1 tsp nourishing cream,
1 tsp sequin,
10-12 doses of Teymurov's foot spray.

How to cook at home

Water is sent to a clean dish and shampoo is added to it.
The components are supplemented with baby oil.
The last one at this stage is the cream.
Now the composition must be made homogeneous.
Then glue is added to it, once again everything is mixed well.
You can put glitter in the liquid for decoration.
The activator is added in portions, kneading the mass with a spoon.
After its stabilization, the process is continued with the hands.

Best Bubble Slime Recipes

There are many ways to make a toy of this texture, but in order to get a really high-quality slime that will inflate into a bubble, it is important to strictly follow the dosage of ingredients indicated in the bubble slime recipe and follow the instructions in strict order. In order not to get into a situation where a lot of effort was expended, and the toy did not work out very well, we made a selection of the best bubble slime recipes

Simple slime

The easiest way to make a bubble slime at home will inflate into a large bubble. If you want the slime to resemble chewing gum, add Bubble Gum flavor.

Ingredients:

Silicate glue - 8 tablespoons;
Shaving foam - 1 cup;
Shower gel - 1 tbsp;
Sodium tetraborate - a few drops;
Dye and decor

How to make bubble slime at home:

Pour glue and shower gel into a container. You can also replace this product with liquid soap. Mix these two ingredients well.
Add shaving foam and mix thoroughly.
Dye can be added at this stage. Now everything needs to be mixed well again.
Stir in the thickener (sodium tetraborate) a little at a time until the lumps disappear.
Knead the slime with your hands until it becomes stringy and stops sticking to your palms.

Slime with gel for washing

Another recipe for bubble gum slime, the toy turns out to be soft and airy. The gel for washing acts as a thickener, such an activator will allow the slime to click better.

Ingredients:

PVA glue - 1/2 bottle;
Shaving foam - 1 cup;
Oily hand cream - 1 tablespoon;
Baby powder - 1 tbsp;
Body lotion - 1 tablespoon;
Washing gel "Persil" - a few drops;
Dyes, flavors, decor - optional

How to make a bubble bubble slime:

Mix glue and shaving foam in a working container.
Pour in baby powder and mix thoroughly.
Add body lotion and cream to the resulting composition.
If desired, you can decorate the slime with glitter, paint or add flavor.
Pour Persil into the liquid slime base, stirring occasionally, until it thickens.
Knead the slime until it stops sticking to your palms.

Toothpaste recipe

Multi-component composition of slime, which, at the same time, is best inflated into a bubble

It is important to add ingredients in strict sequence, remembering to stir them thoroughly before adding new ones.

Ingredients:

PVA glue - 1/2 bottle;
Stationery glue - 8 tablespoons;
Toothpaste - 1 tablespoon;
Hair conditioner - 1 tbsp;
Shampoo - 1 tablespoon;
Shower gel - 1 tbsp;
Sodium tetraborate - a few drops;
Dyes, flavors, decor

Bubble Slime Recipe:

Pour PVA and stationery glue into the dish and stir them well.
Add a small amount of toothpaste, hair conditioner, shower gel and shampoo, alternately.
Color and decorative elements can be added before infusing the activator.
Thicken the slime with borax, pouring in a small amount at a time to avoid making the slime too viscous.
Knead the slime thoroughly with your hands until there are no lumps left.

If you did everything right, you will get a very soft bubble slime that is a pleasure to play with!

Gum without glue

For this recipe, only non-glazed product is suitable. That is, Orbit, Dirol or similar rubber bands are better not to use

The manufacturing process also requires caution, since boiling water is one of the components. At the last stage, you can dip the base into hot water from time to time so that it absorbs the foam faster.

Cooking method

Remove the wrapper from the gum and place in a bowl.
Hot boiled water is added there.
In this container, they work with a spoon until the main component softens and the water cools down to a comfortable temperature.
Next, knead everything with your hands.
When the mass sticks together into one lump, shaving foam is added in portions.
Hand kneading should be continued until the base is flexible enough and the foam is no longer visible.

Watch in this video: a recipe for fluffy slime from gum without glue at home:

From gum and plasticine

Before adding it to the airy plasticine, chewing gum can be chewed rather than soaked in water. It is not worth using it whole, straight from the package, since the sugar in the composition will make the slime even more sticky. Even after cooking in compliance with all conditions, it will remain adherent to the skin, but it will stretch into a film.

Making slime at home

Light plasticine must be kneaded and placed in a mixing container.
Pre-mashed chewing gum is added to it.
Knead both components for mixing.
Then water is added to them.
Next, knead the mass in your hands until it is completely homogeneous.

From gum and shampoo

In this recipe, you need to be careful when adding starch. If there is too much of it, the slime will be tight. And with the optimal amount, the toy turns out to be soft and stretches well.

How to make

Place the water in a wide bowl.
Plates of gum without a wrapper are laid out in it.
The components should be stirred with a spoon so that the plates soften and stick together into one lump.
It must be transferred to a dry dish.
Shampoo is added to the formed base.
The soapy liquid must be mixed into the mass with your hands.
Then starch is poured into the dishes.
And it is also mixed into the base until the stickiness is eliminated.

From glue stick

Making crunch slime using this recipe is easy, but the process of making it will require caution, since you will have to deal with a hot mass.

Pour the contents of 1 tube of glue stick (36 g) into 80 ml of water and put the container in the microwave for half a minute.
Touch up the mass without waiting for it to cool down.
Use sodium tetraborate solution as a thickener. Add it 2-3 drops, stirring thoroughly each time.
When the slime grasps, knead with your hands until tender.
Scatter foam balls on a flat surface, roll the dough in them and mash well.