Which bath is better to choose: useful tips for choosing baths for an apartment

Which manufacturer's plumbing is better to choose

It is difficult to answer the question of which company plumbing is better. The choice of plumbing equipment will fully depend on functionality, design solutions and finances. Taking these parameters into account, a trademark is chosen. An important selection criterion will be the material of the sanitary ware. The equipment of those developers who provide a warranty card and have a real service in the region is selected.

Among all companies, experts focus on the following nominees:

• Roca - striking design and quality of bathroom fixtures for the home;
• Sanita Luxe - durable and durable equipment from a brand from Russia;
• Arcus is a durable technology from Chinese developers.
• Cersanit - good quality, wide assortment for little money.

The review includes the best manufacturers of sanitary ware. Each product is purchased depending on the specific request of the consumer. And the rating will significantly save time searching for reliable information about each participant.

Types of locking mechanisms

Another parameter that affects both the appearance of your bathroom and everyday convenience is the locking mechanism, the way you turn on and off the tap with water. There are several options here:

1. Valve. Handles familiar to everyone, separate for hot, separate for cold water. The most budgetary option, requiring regular replacement of the seal.
2. Single-lever. Adjustment of the pressure and water temperature is made by vertical or horizontal movement of a single knob. If necessary, you can urgently shut off the flow, as well as use the function of economical water consumption. Today, the most popular and reliable option.
3. Thermostatic. This mixer has two knobs: for adjusting the pressure and setting the desired temperature. As a result, you get water with the characteristics you need, regardless of what is happening in urban water supply networks. Such models are especially relevant in a house where there are small children and elderly people who risk accidentally getting burned with boiling water. Also, such taps are equipped with an automatic pressure and temperature control function. The design of thermostatic mixers will fit into any modern interior - but such models are not cheap either.
4. Electronic. Such a mixer seems to have descended from the pages of a futuristic interior magazine. Instead of taps and handles, there are sensors, and water flows automatically, responding to the approach of your hand to the tap. You can program the system, and it will turn on the water supply at a set time, illuminate the water depending on its temperature, and even work from a remote control. The main disadvantage of such a solution (if you do not take into account the money) is too hard water, which is often rejected by European mixer systems, as well as the need to install expensive filters.

The best cast iron baths

Cast iron baths are a model of durability. They have a solid construction and reliable multi-layer enamel that does not lose its original appearance from 10 to 30 years. Such bowls are quiet and keep the water temperature for a long time. Their disadvantages include a large weight and a limited choice of shapes, due to the complexity of working with cast iron.

Jacob Delafon Super-Repos E2902

5

★★★★★
editorial estimate

97%
buyers recommend this product

A bathtub with a headrest, armrests and handles is a rarity among cast iron models. But Super-Repos has it all. The model is designed for built-in, has a rectangular bowl and legs adjustable in height.

Convenience and safety of using the bath is ensured by the automatic drain-overflow and anti-slip surface of the bowl.It is covered with enamel with increased resistance to scratches and impacts.

Advantages:

• There is a headrest, armrests and handles;
• Automatic drain and overflow;
• Anti-slip protection;
• High strength enamel.

Disadvantages:

No hydromassage.

The E2902 bathtub from Jacob Delafon's Super-Repos collection is comfortable and practical, especially for families with the elderly.

Roca carmen

4.9

★★★★★
editorial estimate

94%
buyers recommend this product

The collection of cast iron bathtubs from the manufacturer Roca includes models made in a classic style. The bowls have a compact size of 160x80 cm, but at the same time they can hold up to 222 liters of water.

Raised back oval bathtubs provide comfortable back support. The outside of the bowls can be painted white, black, gray, blue or burgundy.

Roca Carmen are freestanding bathtubs with decorative legs. They are used in conjunction with wall-mounted and wall- and floor-mounted mixers. The inner surface has an anti-slip coating, which makes the plumbing safe to use.

Advantages:

• Good roominess;
• A variety of colors and beautiful decorative legs;
• Anti-slip coating inside;
• Back support.

Disadvantages:

• There are no handles and armrests;
• High price.

The elegant Carmen bathtubs by Roca are the epitome of sophistication and durability. They are comfortable and attractive in appearance.

Castalia prime

4.8

★★★★★
editorial estimate

90%
buyers recommend this product

The Prime collection from the Italian brand Castalia includes bathtubs ranging from 150 to 180 cm long and 80 cm wide. Models belong to the middle price category, have a relatively affordable price and good performance characteristics. Manufacturer's warranty - 10 years.

The rectangular bowls are sold with or without handles. The inner surface is protected from heavy slipping. The bathtub is designed for wall installation and has adjustable legs.

Advantages:

• Anti-slip coating;
• Adjustable legs;
• There are models with handles;
• Variety of sizes in the collection;
• Average price.

Disadvantages:

• The headrest is not provided;
• Not suitable for hydromassage installations.

Castalia Prime - solid bathtubs with a versatile design, which are suitable for rooms of any size and style.

Tivoli Classic

4.6

★★★★★
editorial estimate

83%
buyers recommend this product

The Classic collection from the Chinese brand Tivoli includes baths in sizes 150x75, 160x75 and 170x75 cm. These are budget models, whose price is justified by a simple design and a thinner layer of metal at the bowl. At the same time, the plumbing has an ergonomic shape and is equipped with handles for a more convenient exit from the water.

The inner surface of the bowl is covered with a protective layer with an anti-slip effect. The set includes adjustable feet. The bathtub is suitable for built-in and corner installation.

Advantages:

• Affordable price;
• Anti-slip coating;
• The presence of handles;
• Adjustable legs;
• Versatile design.

Disadvantages:

• The walls are thin;
• Sold without overflow drain.

Thanks to its reduced weight, the Tivoli Classic cast iron bathtub is suitable for installation in multi-family buildings and on the upper floors of timber frame houses.

What material is better to choose plumbing?

Most of the washbasins, bidets, urinals and toilets offered on the market today are made of faience (sanitary ware), less often of porcelain (sanitary porcelain). Outwardly, they cannot always be distinguished, but there is still a difference.

Faience

Such plumbing looks great, is not very heavy, and has a relatively low cost. Its material is porous, so the surface of sanitary ware made of faience is always covered with a waterproof glaze.

Porcelain

Porcelain products are smoother than earthenware, since they are fired using a different technology. They are also more resistant to temperature changes. It is also more convenient to take care of porcelain sanitary ware, because dirt does not adhere to its surface.It is usually recommended to choose porcelain for rooms without heating. Porcelain sanitary ware is more expensive and heavier than earthenware.

A big drawback of porcelain and earthenware is that when heavy solid objects made from them fall on the surface, it is very likely that this type of plumbing can get chips, cracks, or even collapse.

Fit by size

Having chosen a certain material, color, the most suitable size of the bath is selected

Here, attention is paid to the following factors:

• Board height above the floor,
• The depth of the bath itself
• Cup dimensions.

The height parameter is chosen according to the specific height of the people who will take the bath. The height should be approximately 65 - 70 centimeters for adults. It is worth considering the children in the family, because then it is recommended to take a bath of a lower height.

The depth parameter is the distance from the bottom of the bath to its top edge or to the overflow siphon. The indicator is chosen such that a person immersed in it is completely covered with liquid. The optimal value is 60 cm.

Length and width parameters are calculated for the individual characteristics of a person. The length is most often 1.5 - 1.8 meters, and the width is 0.7 - 0.8 meters. A similar shape is suitable for an incomplete adult who is up to 180 cm tall.

Most common sizes

Consider the most common bath sizes.

Cast iron baths are of the following types:

Small 70 * 120 or 130 cm,

Eurostandard 70 * 140 or 150 cm.

This species does not shine with diversity.

Steel options are presented in sizes:

Length 1.5 - 1.8 meters, Width 0.7 - 0.85 meters.

Economy options that are 120 cm long.

Acrylic bathtubs offer the largest selection of options. There are plumbing fixtures, the length of which is 1.2 - 1.9 meters, and the width is 0.7 - 1.7 meters. The dimensions are determined by the shape and depend on the overall configuration of the product.

Oval ceramic baths are made 1.3 - 1.7 meters long, 0.65 - 0.75 meters wide. It also depends on the individual configuration.

Model selection

Even before choosing a model, you should decide whether the bathtub will be built-in or will stand separately. Built-in plumbing should have completely flat, without any bends of the side. This is necessary for subsequent tiling or installing a special screen under the bath. It is better to equip a freestanding bathtub with curly legs - this will add an exotic element to the interior.

Particular attention should be paid to the location of communications - now it has become fashionable to make a drain in the middle of the bath, while most standard apartments have a left-side drain. Advice!
The piping in the apartment must be completed before buying a new bath

The sewerage system must be completely ready for use.

Advice!
The piping in the apartment must be completed before buying a new bath. The sewerage system must be fully operational.

Acrylic bathtub selection parameters

Dimensions and shape

If the bathtub needs to fit into a niche or corner, first the dimensions and shape are selected, which can be either standard or exclusive. The optimal sizes are shown above.

As a result, the human body should be completely covered with water, and the back and head should be located at a comfortable angle. In this case, you need to understand that a non-standard product will cost relatively more.

Number of layers and thickness

A high-quality product is created from the inside from polymethyl methacrylate, from the outside - from polyurethane. The thicker the PMMA, the more expensive the device, but it also lasts longer - it is advisable to stop at 5 mm and higher.

If there are 3 or more layers, then the “pie” contains ABS plastic and, most likely, a mixture of polyester resin with fiberglass.

In this case, the thickness of acrylic is minimal, therefore, PMMA will partially disappear in about 3 years, and after another 15 months, porous acrylonetrile butadiene styrene (ABS) will collapse under the influence of water.

Material

To distinguish polyurethane from tarred fiberglass, it is necessary to inspect again, but now this is the outer coating.

1. The reinforcing material has high thermal insulation and environmental properties - it is smooth with a dark shade

2. Strength enhancer when heated has a pungent chemical odor - it is rough with veins in the structure.

Of course, it is better to choose polyurethane.

Internal coating

The inner coating is also subject to inspection - it is checked visually and tactilely. The surface should be perfectly flat and also glossy and shiny.

Quality

You can check the quality of the material with a flashlight. If you turn it on and apply it to the surface, then no light should break through from the opposite side. Otherwise, either the acrylic layer is too thin, or it is not there at all.

To further test the strength, you can sit on the side of the bowl and sway slightly.

Supporting metal frame

An important selection parameter is the supporting metal frame. It is made of a rigid rectangular pipe, covered with anti-corrosion compounds, connected by welding or hardware.

Along the perimeter in the corners there should be legs that can be adjusted in height. An excessive number of supports may indirectly indicate the low quality of the product, namely, the inability of the walls to keep their shape.

Equipment

It is advisable to buy a bath with the following elements:

1. Overflows and plums;

2. Decorative panels;

3. Mounting hardware.

Well-known companies always have these mandatory components in stock.

Additional functions

If you wish, you can always choose a model for your requests with the following additional functions:

1. Air and hydromassage;

2. Diode lighting;

4. Ability to listen to music.

The choice of bathroom fixtures

The choice of plumbing, first of all, depends on the room where it will be used. If a house or building is just being built, and plumbing will be installed in it for the first time, you need to schematically depict a plan of plumbing wiring and the places where the bathroom, shower, sink, toilet will be located. This is necessary to determine the number of running meters of pipes that should be purchased. Copper pipes are the most reliable and durable. They are quite expensive, steel or plastic pipes are cheaper, but their quality is poor. If you have to choose between plastic and steel pipes, then metal-plastic pipes will be the ideal solution. They have anti-corrosion properties, do not need additional connecting elements, and are easy to install.

Once the correct pipes are selected and installed, you should choose a bathroom, sink and other types of plumbing, depending on your requirements. What principles should be followed when choosing them? First of all, plumbing must be reliable, because it is designed for long service life. Therefore, you should not save on it. It is better to choose products of well-known brands that have a good reputation and have proven themselves well in the plumbing market.

As for the baths, the best solution is cast iron models. This is the most reliable material possible, it retains heat perfectly. The design of modern cast iron bathtubs is designed to accommodate a variety of bath placement options. You can easily pick up corner, on legs, rectangular, square bathtubs, which will best fit into the interior of the bathroom.

Basin and shower faucets are best chosen from one range

When buying plumbing, pay attention to the presence of all parts in the kit. Sinks and toilets are of two types: from special earthenware or porcelain

Carefully glazed earthenware sinks look very nice, but porcelain items are denser and more durable. They are able to maintain a smooth surface for longer, on which scratches are not noticeable.

When choosing a toilet, pay attention to the design of the cistern. There are two-speed tanks with two buttons

When you press different buttons, a different amount of water flows out. This is a very useful property especially for private homes.

Advantages and disadvantages of acrylic bathtubs

There is a constant debate about whether acrylic plumbing is so good and whether it is worth buying. Baths made of such material have both advantages and disadvantages that must be considered before buying.

disadvantages

The negative opinion is mainly about cheap baths. But expensive acrylic products also have a number of undesirable features.

Low resistance to high temperatures. The melting point of acrylic is about 150 degrees Celsius. Of course, no one will warm up the water to such an extent, but deformation of the material under the influence of boiling water is possible.
Fragility. Acrylic bathtubs sag under weight, so they are not suitable for obese people. Falling heavy objects can cause cracking

It is important to take water procedures very carefully so as not to damage the product or harm yourself.
Sensitivity to household chemicals. Conventional bathroom cleaning products are not suitable here.

Special non-aggressive cleaning agents are required, otherwise the surface will be scratched, cloudy or streaked.
Life time. Is only 10-20 years old at best. This may require periodic repairs. A significant drawback, given the high cost of the product.

Dignity

Despite the existing drawbacks, acrylic bathtubs have many fans. Such products have a lot of advantages over plumbing fixtures made of other materials, which are also not ideal.

1. Heat retention. The surface of acrylic bathtubs itself is not so cold. And the water in it stays hot much longer.
2. Lack of enamel coating. The paint on cast iron and steel baths constantly cracks and crumbles. Their restoration requires expensive repairs. This does not threaten acrylic products. Small cracks on them can be sanded by yourself. Of course, serious damage requires contacting the masters.
3. Ease of washing. In most cases, the product needs only to be rinsed and wiped with a cloth. Virtually no dirt eats into the surface. Acrylic is not susceptible to the growth of bacteria, the appearance of fungus and rot.
4. Anti-slip coating. The top layer of the acrylic bathtub is smooth but hard to slip on. There is no need to use special mats and the risk of falling is minimal.
5. Low weight. An acrylic bathtub weighs an average of 25 kg. It is easy to lift, carry and install, even alone. For comparison, a product of the same size made of cast iron reaches 120 kg.
6. Simple installation. There is no need to install such a bathtub on legs. The set includes a special metal frame that protects the product from deformation when filled with water and takes on part of the load.
7. Diverse design. Acrylic is plastic. It is easy to give it any shape. This allows you to solve the problem with a small bathroom area and decorate the interior. In addition, there are many colors available.

Among the advantages of an acrylic bathtub is ease of cleaning and heat retention

The size and shape of the bath. How to define them correctly?

the length can be 1,500, 1,700 or 1,800 mm, the width is 700, 800 and 850 mm, and the height is 650 mm. But you should not buy a bath that is too small either, since water procedures in this case can turn into torture. In an ideal bath, the person is in a reclining position with their legs stretched out. The width of the bowl should be such that the distance from the body to the sides is 5-7 cm on each side, if the distance is less, then bathing will be accompanied by a feeling of tightness.

Studying the proposals of manufacturers, one should not only superficially consider the models, but carefully study them. The fact is that even bathtubs that are similar in appearance can differ.For example, the presence of armrests, handles inside the bowl, a gentle slope adds comfort and at the same time saves water, because the volume of water poured in such structures is less.

After deciding which size to choose, study the shape of the bathtubs. Even 10-15 years ago, in apartments and houses, one could find only traditional rectangular and square structures, which were installed in the corner or along the walls in order to make the most rational use of the space. Today, buyers have a huge choice - in the bathroom, you can install not only models that are familiar in shape, but also angular, oval, round ones, and they can be placed both near the walls and in the middle of the room.

When you understand what size and what shape the model will best fit into your interior, move on to another, even more important issue - the choice of the bath material.

There are only two criteria by which to determine the size, here they are:

• The size of the area for a bath in your bathroom. By the way, if you have a very small bathroom, and you do not want to be limited in the size of the bathtub, then asymmetrical corner bathtubs would be a good solution.
• The set of a person (and if the whole family will use the bath, then it is worth considering the height and physique of each family member), because if you decide to buy a bath, then surely, on hard days, after work, you would like to relax comfortably, taking water procedures in horizontal position.

Varieties of forms

It is already worth noting that corner and non-standard bathtubs are made in 99% of cases from acrylic and quaryl, due to the plasticity and flexibility of these materials. There are rare models made of steel, but such products will rather have to be bought on order, due to the lack of popularity. And what is really there, the price of a steel bath of a non-standard shape will be absolutely inadequate and will hardly be able to interest anyone.

What is the preferred material for the shower tray, shower or bath tub?

Cast iron

Time-tested material, reliable, durable, but heavy. It keeps warm well. Disadvantage: If a heavy object falls into an enamelled cast iron bathtub, it can damage the coating.

Steel

Steel baths are lightweight and inexpensive. Disadvantage: when using thin steel, the walls of such a bath can bend. Such plumbing products quickly heat up, but they do not retain heat well, so the water in them cools down quickly.

Acrylic

Lightweight modern material with low thermal conductivity, so the water in the acrylic bathroom does not cool for a long time

Disadvantage: The surface of the acrylic bathtub is not resistant to scratches and impacts, therefore it must be cleaned with care and with the help of special cleaning and detergents

When choosing plumbing equipment, it is also important to take into account which company it is manufactured by. It is better to buy expensive but high-quality plumbing fixtures of well-known brands than cheap ones from unfamiliar manufacturers.

Cast iron

Oval and rectangular baths, made of a strong and heavy alloy of iron and hydrocarbon, are distinguished by their durability. Cast-iron models weigh up to 150 kg, have been used for a long time, but they retain their positions.

Advantages and disadvantages

Time-tested baths can last half a century. The water in them does not cool down for a long time, the alloy retains its temperature. Structures mounted on legs do not sag or bend. Cast iron bathrooms are covered with enamel, on which chips and scratches do not form, the shine does not disappear.

Dirt does not accumulate on a smooth surface, the product is washed with washing powder. Thick walls mask sounds, it is inaudible in the room when water flows from the tap.

In addition to the advantages, cast-iron bathtubs have disadvantages:

• heavy weight;
• high price;
• lack of a variety of forms.

Buyers prefer models made of durable alloy, which have a long service life and are easy to clean. Moreover, these baths are easy to use.

Options

The standard length of the product does not exceed 180 cm, height 85, but models with such dimensions are not suitable for private cottages. Other dimensions are used depending on the material chosen, the area of ​​the room. For safety and convenience, the person's head in the bathtub should be above the water, so the depth has a standard size of 0.6 m.

Cast iron is difficult to process, alloy models are produced with the following parameters:

• 120/70 and 130/70;
• 140/70 and 150/70;
• 180/85.

Models with small dimensions are installed in small rooms, but it is uncomfortable to take procedures in them. To arrange a room in a panel house, baths with dimensions 170/70 are purchased.

Manufacturers

High-quality sanitary ware is supplied to the construction market by European companies. Russian factories producing cast iron models are trying not to yield to foreign firms.

Devon & devon

The Italian brand creates its products in a classic style and offers luxurious cast iron bathtubs with massive legs, sheathed with aluminum or copper. The company produces compact and large-sized sinks, shower cabins with expensive fittings, faucets, marble and mosaic coverings, ceramic bathtubs.

Roca

A group of companies from Spain, which owns almost 78 enterprises, began its activity with the production of cast iron batteries for heating houses. Over time, Roca began to create boilers, mastered the production of accessories for bathrooms, including accessories, faucets, furniture, ceramic tiles, and porcelain sanitary ware.

Porcher and JacobDelafon

The company from France, which began its activity in the 19th century, now supplies the market with high-quality equipment, produces cast iron enameled products using a special casting technology. The furniture collections produced by the brand for the bathroom are distinguished by their laconic form and sophistication.

Goldman

The products of the Hong Kong-based company are simple in design, but prized for their strength and durability. Such properties of the model acquire due to the addition of titanium powder to cast iron. Notches are made on the baths, which are covered with high-quality enamel, and handles are installed.

Criterias of choice

In order not to change the sewage system, you need to purchase a model whose pipes will be combined with the drain in the room.

Checking the flatness of forms

Before buying a cast-iron bath, you need to pay attention to the sides and the size of the angle, if the design is not oval, it should be 90 °

Checking the package contents

Before picking up the goods, you need to see if there are tubes, legs, handles, cork, which are relied on in the standard configuration of a particular model.

Which bath to choose

We hope that you will not have any difficulties with the choice of material.

But the dimensions are worth paying attention to! If your bathroom cannot boast of size, then you need to be clearly defined using a simple formula: Ideal bath length = distance between opposite walls (+/- 1-2 cm)

Ideal bath length = distance between opposite walls (+/- 1-2 cm).

Consider also such an item as the growth of potential use of the bathroom. The length of a standard bath ranges from 150 to 180 cm, the width, as a rule, is in the region of 70-85 cm. If a person can lie in it without bending his knees, then the product is selected correctly (the distance to the sides should be at least five centimeters). A depth of 50 to 60 cm is considered normal.

Features of choosing a bath

Before deciding which company to choose a bath, you need to decide on its main parameters, which include:

• material;
• size and shape;
• the presence of additional functions (handrails, hydromassage equipment, water lighting).

In addition, you should consider the financial capabilities and style of bathroom decoration. The criteria for choosing an ideal bath can be conditionally divided into general ones, which determine the comfort of its use, and specific ones, characteristic of a certain type of material.

When choosing a bath, it should be remembered that sometimes the consumer properties of expensive models do not always exceed the characteristics of standard products. In this case, the consumer pays not for additional functions, but for the popularity of the product brand.

How to choose an ergonomic bathtub

When looking for plumbing fixtures for your bathroom, you need to consider the following points:

• individual characteristics of the intended users;
• desired additional equipment for hydromassage, for example, as in Triton products;
• dimensions of the room where the bath will be installed.

Acrylic bathtub of "Triton" company is equipped with additional hydromassage equipment

How to purchase a quality bathtub

The variety of materials suggests several types of criteria by which you should choose a product with a long service life.

However, there are some general characteristics that you need to pay attention to. These include:

• availability of the required certificates;
• confirmation of all technical parameters of products with appropriate documentation;
• absence of visible defects in the coating and base of the bath;
• provision of warranty obligations by the seller;
• the functioning of all additional equipment.

When deciding which manufacturer's bath to choose, it is necessary to approach this comprehensively and take into account various factors. A thoughtful analysis of the proposals of various companies will not only avoid unnecessary expenses, but will also help to find an option that optimally combines all the necessary functions, an interesting design and an acceptable cost.

Rating of sanitary ware manufacturers

Since there is a large number of plumbing equipment on the market, it becomes difficult to choose the one you need. To make things easier, a ranking of plumbing manufacturers has been compiled. The companies were selected taking into account the opinions of experts, consumers, and tests. Emphasis is placed on the following parameters:

• Material;
• Stability of the structure;
• Ease of installation;
• Design;
• Mounting method;
• Functional;
• Assembly features.

Since there are a lot of plumbing products, a rating was created, which included the best plumbing manufacturers. The rating contains devices that differ in functionality, material, and other parameters.

Best mixers

Additional bath functions

"Old school" bathtubs made of cast iron and steel usually do not imply additional features. But models made from more modern materials, for example, acrylic, are often equipped with advanced functionality. Let's see what options exist and what they are for.

1. Hydromassage. Thanks to a special pump, a stream of water jets under pressure is created in the bath. This effect allows you to relax and tones the body.
2. Air massage. The function works on the principle of hydromassage, but instead of water jets, air bubbles act on the body. Some models combine two types of massage in one bath - this is what we call a jacuzzi.
3. Chromotherapy. When taking such a bath, blue lamps will shine on you. It is believed that they have a tonic and even antibacterial effect, and also have a good effect on the circulatory system of the body.
4. Automatic water disinfection. There are special holes in the walls of the bathtub with this function, through which a disinfectant flows after each water drain. The “smart” bath is also responsible for the automatic flushing of this product.
5. Fill level sensor. Turning on massage with an empty bathtub is fraught with system failure. This function insures the plumbing against such troubles: before starting the hydro or air massage, the system will check the fullness of the bath.

Manufacturers at a glance

Among cast iron baths, the products of the domestic manufacturer "Universal" enjoy authority, the Spaniards Roca and the French Jacob Delafon are good.

Steel options: Roca (Spain), BLB (Portugal), Estap (Slovakia), Bette (Germany), Lipetsk Pipe Plant (Russia).

Acrylic: Czech company Ravak, Spanish Pool Spa, German Duravit, Polish Kolo, Dutch Riho, Russian Aquanet. A special type of acrylic, kvaril, is used by the Dutch Villeroy & Boch. These particularly high-quality and durable bathtubs are available only from a specific manufacturer.

Ceramic models: TM Colombo, Santek Russia, Globo and Flamina Italy.

Installation features

Having chosen the desired size, they select the shape of the bath, the type of its installation. By the type of installation, they are distinguished:

• Corner.
• Wall mounted.

Models of the second type are mounted to one of the walls without gaps, but it is possible to move away from each wall. The first option is placed in a corner. The mounting type determines the shape.

Wall-mounted baths will delight the buyer with a variety of designs. The most popular remains oval, but there are other options. Bathtubs with asymmetrical curved lines are considered popular products. Corner products are made in the form of a quarter circle. Products with irregular geometry are less common. Corner baths are made right-sided, left-sided.