Painting leather shoes at home

In what cases is it necessary

There are a lot of situations when it becomes necessary to use shoe paint. In addition to the desire to change the original color, it is used to restore the "presentation" of the beloved couple. Most often, you have to eliminate various defects that have appeared as a result of inaccurate operation:

• the presence of scuffs;
• damage to the upper surface in the form of scratches;
• the appearance of dirty spots that cannot be removed;
• change in the original color due to burnout.

In such cases, the use of conventional shoe creams does not give the desired effect, and there is not always a desire to go to the workshop. Therefore, it makes sense to try to "revive" your beloved couple yourself. In addition, painting can be seen as a rewarding creative process.

Preparing for the procedure

Dyeing dirty shoes is a bad idea. First, the shoes are cleaned with a special brush, if there is none, then you can take a regular toothbrush, but not with stiff bristles. It is impossible to strongly influence, as well as to smooth the area of ​​the shoe. In this case, dust and dirt will be absorbed into the material and it will be very difficult to clean it later.

Pay attention to the specifics of the spots. When it comes to fatty acids, chalk, talc and starch will help remove them.

Pour a solution of these substances onto the stain, leave for three hours. Then simply remove with a soft cloth and rinse with warm water.

Salt stains are a nightmare for suede shoe owners. It is quite difficult to get rid of them, but at the same time they appear quickly, as soon as you go out in suede boots in the rain for 10 minutes. A mixture of ingredients will help get rid of them:

• A glass of warm, clean water.
• Half a tablespoon of ammonia.
• 1 tablespoon of liquid soap.

First, all components are mixed until complete dissolution. Then a sponge made of a soft material that will not leave marks on the shoes is moistened, and the dirty places are wiped with it. Leave for five minutes and no more, then wipe it again, but with a dry cloth. Traces of dirt that have come from nowhere and are of the same nature, you can try to wipe with a cloth dipped in a solution of nine percent vinegar. But in this case, you need to take care of eliminating the unpleasant odor.

Dyeing technology

Shoe dyeing begins with its preparation. First of all, the surface should be cleaned of the old coating. This can be done with a special pickling compound with a napkin. After that, it is necessary to dry the shoes for several hours. Before starting, you should cover decorative elements with masking tape: buttons, buckles, heels, welts, inserts.

It is recommended to paint shoes with creamy compounds using a soft sponge with small pores. The composition is applied in a circular motion, while you must not press too hard on the foam rubber

A brush is used to apply liquid paint, paying particular attention to the seams and folds. When using the spray, the can should be kept at a distance of 20 cm from the surface.

If there is a fixative in the kit, then it is applied over the last layer. It will provide strength and color saturation. If there is no fixer, you can use a vinegar solution.

The dyeing technology depends on the type of material. Most often, the skin is subjected to this procedure. In order for the paint to lay down in an even layer, the surface must first be degreased. For this, professional shoe care products are recommended in liquid form and in the form of foam. You can also use soap or alcohol solutions. Do not use acetone, gasoline or similar solvents.Such products will only harm, drying out the skin, giving it fragility and deteriorating quality.

If there are scuffs or scratches, sand these places with fine-grained emery paper. To deal with deep cracks and cuts, you should resort to thin leather, applying it with a small spatula. After preliminary preparation, the shoes must be allowed to dry at room temperature before the main process. You should not resort to hair dryers and other methods.

Before dyeing suede shoes, they must be thoroughly cleaned. This is done with a double-sided brush. Hard bristles on one side are used to remove dirt and dust, rubber teeth on the other to loosen the bristles. Fat stains are removed with ammonia, and shiny ones - with a vinegar solution. After drying, you can start spraying. A brush is used to process the seams. Suede sneakers are dyed in the same way.

Paint suede shoes

Suede shoes always look very impressive and rich. But nothing lasts forever and over time it loses its color, may fade and rub, or you just wanted to repaint the shoes in a different color.

Unfortunately, even our most beloved and comfortable shoes lose their attractive appearance over time. And I really want to give her a second life. Let's try to figure out how you can revive your own shoes or boots. Can the shoes be dyed? What products should be used to paint leather, rubber and suede shoes. What do you need to remember when painting shoes, and is it possible to repaint the shoes at all? Is it necessary to turn to professionals for this, or are there ways to do it yourself?

If you decide to eliminate defects in your shoes, to make the color more saturated and vibrant, or even to repaint your shoes or boots, you can entrust this to the professionals in the shoe restoration atelier, but you can also carry out this process yourself, at home. In this article, we will try to give you some tips to help you understand how to repaint your shoes yourself, giving your favorite things a second life.

This is a very simple and budget way to transform your shoes. You just need to follow some rules and sequence.

It is important to remember that shoes are made from different materials, each of which needs a unique approach. For example, if you want to remove the flaws of white shoes, you need to be extremely careful when cleaning.

Do not use alcohol and acetone, this may damage the coating. Otherwise, the same algorithm is used to paint shoes.

Types of funds

You can update the color of shoes at home as well as in a shoemaker

To achieve this, it is important to choose a product that is suitable for the type of material. For the reliability of the result, it is better to give preference to paints of well-known brands.

Shoes, sandals or suede boots can be dyed without the slightest expense. For this, proven folk methods are used. They work reliably, but the effect does not last as long as after professional remedies. The main difference between homemade paints for suede shoes is safety.

All of them are absolutely harmless and do not require any special precautions. You can use them as often as needed.

Professional

Suede and nubuck paints are always produced in liquid form. The greatest demand was won by the brands Salton, Kiwi, Salamander. It is difficult to get confused in the varieties of pigmented products for suede shoes, since the typical assortment is small. All manufacturers produce formulations in three types:

1. Cream paint. A bottle of pigmented liquid. The kit may include a sponge. Otherwise, you must separately purchase a sponge or brush for applying the composition.
2. Balm paint. The release form is similar to the previous one - a bottle with a coloring liquid substance.The balm penetrates deeper into the material and has natural ingredients in its composition. The increased concentration of pigments allows for an economical use of the product.
3. Spray paint or spray paint. Available in the form of a spray bottle. This method of painting is the easiest and fastest.

Cream paintBalm paintSpray paint

Folk

For those who cannot stand the smell of chemicals or just want to save money, folk methods of painting are suitable. Only owners of black, blue, brown and white boots will be able to use them. The result is obvious, but does not last long.

With coffee, you can dye your shoes effortlessly. The process consists of rubbing warm, slightly damp coffee grounds into the material. After drying, remove it with a brush. For a light refresh of the color, the boots are wiped with a sponge moistened with strong brewed coffee. Only black and brown suede is painted this way.

A black or blue coating of carbon paper is great for updating suede shoes in matching colors

You need to gently rub it with the sticky layer of the shoe, paying special attention to the whitish areas. This method attracts users with its simplicity, but the result does not last long.

The look of white suede boots or shoes is refreshed with a mixture of equal amounts of butter milk and chalk. Instead of the latter, you can take sports magnesia or talc. The composition is applied for one hour and then removed with a dry brush.

Black and brown suede colored with coffee groundsBlack or blue carbon paper is suitable for updating shoes of matching colorsWhite shoes are refreshed by a mixture of equal amounts of fat milk and chalk (talc, magnesia)

Tips & Tricks

What to consider when cleaning shoes from paint?

1. When carrying out manipulations with cleaning shoes and using special purchased products, be sure to wear gloves.
2. Even if the paint coat is thick, it is not recommended to use chlorine-based household chemicals for cleaning. They have a good whitening effect, but they have a pungent odor and can only damage the surface of the shoe.
3. Whichever cleaning agent you choose, try it first on the small, least visible area of ​​the material.
4. The agent that removes the composition must be thoroughly washed off the surface.
5. After cleaning, wipe the shoes with a dry cloth and allow to dry. It is better if a place with direct sunlight or a hot battery is not chosen for drying.

Experts do not recommend using a knife or other sharp objects to remove old paint.

p> Share link:

Stages of work taking into account the material

Shoe painting is a scrupulous and responsible process. The selected composition is sprayed or applied with a sponge or brush in several stages. Depending on the degree of wear, the shoes are covered from 2 to 4 times with a uniform layer of pigment. Allow a pause between each application to ensure complete drying.

The following steps are common when painting any boots:

• inserting crumpled paper inside to flatten and shape;
• pasting with tape and foil on the soles and all parts that should not be painted;
• alternate application of layers of paint.

It is better to choose paint in a specialized store with the help of a consultant. The main thing is that it matches the material that needs to be updated. Suede is usually painted through an aerosol spray bottle or with a special sponge. The latter is a fine bubble cleaner and also a brush can be used on leather shoes. The aerosol should be handled carefully to avoid dripping.

The table shows the most popular brands in our country that produce paint for shoes made of leather, suede and nubuck. These manufacturers have proven themselves well. Brand products are in demand and have proven their effectiveness more than once.

Leather

First, all scuffs are primed on the products.

It is especially important not to skip this stage when preparing white shoes, otherwise the damaged areas will eventually differ in color saturation. Liquid leather is used to seal visible defects.

After pasting the boots with tape and filling them with paper, they begin the main process. Before dyeing leather shoes completely, they are engaged in small details. Apply the pigmented cream and liquid with a sponge or brush in a circular motion. The composition is not rubbed in.

When working with aerosol, the can should not be held close to the product. Spraying should be done at a distance of 20 cm from the boot

It is important to try not to paint over the same area twice.

Pay special attention to seams and bends.

When the painting of leather shoes is completed, you can start applying a special fixer, if it is included in the kit. Otherwise, after drying, the shoes are wiped with a cloth dipped in vinegar solution. It is allowed to use dyed shoes only after 1-2 days.

Suede and nubuck

To clean the suede before painting, use a special brush with stiff bristles and a degreasing alcohol solution. Effectively helps in removing dirt by steaming the material within minutes. The paint is applied evenly, repeating the procedure 2 or 3 times, waiting for each layer to dry completely. Use a brush for the seams. After the last layer has dried, the pile is raised with the rubber side of the brush and the boots are treated with a water-repellent spray.

Nubuck does not like getting wet, so it is better to clean it with a dry method. Dirty stains must be treated with soap or alcohol. Boots must be dry before painting. Shoes made from this material are sprayed only. The main advice is to keep the balloon at a distance of 20 cm from the surface.

Rubber

Rubber is difficult to stain, so it is used only to hide a defect or to make the model more interesting. In any case, it is better not to count on an ideal and long-term result. At home, you can paint rubber shoes with enamel, acrylic or other suitable paint.

Before painting, it is enough to wash the shoes with soapy water and dry well. Alcohol cleaner will have a detrimental effect on the condition of the rubber, so it is better not to use it. If you need to apply a drawing, you should use a stencil. After painting, rubber shoes must be dried for several days.

Textile

Textile footwear most often loses its appearance. After numerous washes, the color of fabric sandals or sneakers quickly fades. Dye for textiles or products with an acrylic composition will help to give them freshness and accuracy. It is necessary to be extremely careful and attentive when carrying out work - this will avoid stains.

To paint fabric shoes at home, you need to proceed as follows:

• wash and dry the product;
• take out the laces;
• dilute the dye in water according to the instructions;
• lubricate all rubber and plastic parts with petroleum jelly;
• immerse the steam in a container with pigment for 5-10 minutes;
• dip in a bowl of vinegar solution;
• rinse until clear water;
• dry and remove the petroleum jelly.

Heel and sole

The outsole is the part of the shoe that suffers the most from mechanical damage. To restore or renew the design of the sole, paint in various colors is also available.

Regardless of the choice of dye, the most problematic areas need to be treated first. Otherwise, the painted surface will take on an uneven color. For painting it is necessary to prepare:

• spray dye;
• foam sponge;
• clip or other holder;
• container for paint.

Pour the dye into a small container and paint the problematic frayed areas with a sponge. After drying, the procedure can be repeated

For ease of handling and protection of the lining, you can fill the inside of the boot with old paper to shape, paying particular attention to smoothing out the folds.

A partially treated boot or shoe must be evenly sprayed from a spray can - according to the instructions for its use, from a distance of 20-30 cm. Allow to dry and repeat the staining if necessary. To preserve the color and increase the service life, the surface of the skin should be treated with a protective water-repellent agent and cream.

Suede and nubuck shoes are dyed in the same way using products for this material. To dye shoes in a different color, it is better to contact a master

Old paint is washed off only with professional compounds, which, if handled carelessly, spoil the structure of the material

To paint the heel, you will additionally need acrylic paint thinner and a soft, lint-free cloth to rinse off the old pigment. If the heel is covered with material, solvent and fine sandpaper will help to remove it. To protect the upper of your shoes, you can use masking tape, which should be used to carefully seal the space near the sole. A can of automotive acrylic paint is enough for several heels and soles.

The processing of the heel and sole is carried out in several stages:

1. Wash off the paint.
2. Spray the heel or sole evenly with a dye composition from a spray can.
3. Dry.
4. Re-stain.

How to dye rubber boots?

Sometimes the question arises: is it possible to paint rubber boots, because such shoes were invented for rainy seasons to withstand water? This material is quite problematic to paint, however, nevertheless, you can still create an individual and creative design or eliminate some defects:

• For these purposes, you can use enamel paint, acrylic paint or any other designed for rubber products - check with the seller.
• Before dyeing, be sure to wash your gumboots and wipe them dry with a cloth.

Important! Unlike leather shoes, rubber shoes should not be wiped with alcohol, as this can deteriorate.

• To apply an original drawing or pattern, you can use a ready-made stencil or make it yourself.
• After painting, rubber boots should be left to dry for at least a couple of days.

2 Dyeing leather shoes

To restore smooth skin, you need:

• liquid skin for sealing microcracks;
• color restorer;
• degreasing liquid;
• colored cream based on wax.

To improve the quality of the dyeing, it is recommended to shape the shoe. Fill a boot or boot with paper or special cardboard inserts. This will help to avoid blemishes when dyeing the folds on the bootleg and seams.

Painting is carried out in several stages. Especially worn areas and folds are processed first. An additional coat of paint may be required in certain areas.

You need to use special products for working with the skin. They do not contain acetone and other components that can spoil the quality of the material.

To clean white leather before painting, you can use a gruel made from baking soda and hydrogen peroxide. The mixture must be prepared before use by mixing the ingredients to the consistency of sour cream. Apply with a sponge to contaminated areas. Leave for a few minutes and rinse with clean water.

Selection tips depending on the material

There are many domestic and foreign manufacturers offering effective products for any model, from shoes to boots. Thinking about what you can paint your shoes with, it is worth starting from the material from which it is made.Each species has its own characteristics.

For skin

This is the traditional and most commonly used material. Accordingly, there is a large selection of paints for leather shoes. The products are available in the form of a cream, spray or liquid. Since products made from this material have a long service life, you should not save on paint for leather shoes.

Most convenient when using aerosols, since the degree of color is easily controlled. But you can also apply creams in tubes. Most often they have an additional foam tip. The package may include a spreading sponge. The advantage is that they do not spread over the surface and can be applied pointwise. In addition, after the creams, a waterproof film forms on the shoes. Liquid options are expensive and are mainly used by professionals, but can be successfully used for home repairs. The advantage of paints for leather shoes is the variety of different colors.

For suede

This delicate material needs to be handled more gently than smooth leather. For suede, cream and spray are suitable. There are many options on sale that differ in their composition, method of application, and color characteristics. Before dyeing suede sneakers, shoes or boots, you should decide on the volume of the upcoming repair and choose a product based on these considerations. If there are not so many “bald spots” on the product, inexpensive formulations can also be used. Most of the paint for sneakers and other types of footwear comes in the form of a spray. When using it, it is necessary to study the instruction manual. The spray can be used to paint both the entire product and individual "bald spots".

For nubuck

Nubuck is a type of leather that has been specially treated and polished using low-abrasive products. It happens natural and artificial. Typically, the dyeing agents for nubuck shoes are the same as for suede. Spray paints in various colors can be found for these materials in the shoe department. If you could not find the right shade, you can try to darken or lighten it with black, white compounds.

For textiles

The upper of this material is used in shoes, sneakers, slippers, sneakers. Shoes made of canvas, linen, silk are easily dyed, which makes them look more well-groomed. The most commonly used paint is white for sneakers and similar items. Moreover, not only used shoes are subjected to the procedure, but also newly acquired ones in order to give them a more attractive look. For these purposes, acrylic and aniline compounds are most suitable. Sometimes parents have a question about neon sneakers - how to paint them so that they glow in the dark. To do this, you need a product based on plastisol, with which you can draw various patterns on the shoes.