How to choose the right toilet: advice from an experienced plumber and a list of proven models

How to install?

This wall-mounted apparatus is mounted in a toilet near the toilet. If you decide to put a hygienic shower after renovating the room, it is worthwhile to foresee the presence of this plumbing in this room in advance. That is, one should take into account the design of the toilet, the location of the toilet, sink, bath, and the technical aspects of the installation itself. In this option, you can do without additional structures.

In the case when nothing will change in the room, you will have to create a special plumbing cabinet. This method is inconvenient in that each time the temperature of the water in the bidet or sink spout is adjusted, it will be necessary to open this device. This problem can be solved only by installing a wall-mounted shower with a thermostat. In this case, everything will happen automatically.

Pros and cons versus bidet

As for what is more convenient - a pair of toilet bowl + bidet or a hygienic shower for the toilet bowl, there is no need to argue. Everyone decides for himself. Let's take a quick look at the main pros and cons of both devices:

1. More space is required to install two bowls - bidet and toilet. You can't argue with this argument, although not everyone has a need to save space.
2. When performing an intimate hygiene procedure using a hose and a watering can, you do not need to move from one plumbing fixture to another. This is also an obvious fact.
3. When using a shower, it is fixed somewhere on the wall. At the end of use, it may "drip" for some time - the rest of the water will drain. This is basically a theoretical possibility, since in practice, with a properly functioning switch, there are no wet spots under the watering can.
4. When using a bidet, it is very difficult to forget to turn off the water. If you have a wall-mounted version of a hygienic shower, this is easy to do: there is a double shutdown system - a button / lever on the shower head and a tap on the mixer. You cannot leave the tap open after the procedure. In this case, the flexible hose is under constant pressure, but it is not designed for this, therefore it can break. The situation is different when using the mixer for the sink - it can be seen that water is pouring.
5. You can use a flexible hose not only for its intended purpose, but also for other needs. For example, it is convenient to draw water, wash the toilet or cat / dog bowls and trays.

Oddly enough, it is the last fact that is often decisive - an additional bonus in the form of extended functionality is always pleasant. The advantages of showers include the possibility of organizing for relatively little money. But this is about devices with a mixer.

Manufacturers rating

Today, many manufacturers are known who are engaged in the manufacture of meat grinders. Certain features are characteristic of their products.

Bosch

This company makes its products only from quality materials. For this, durable plastic and metal are used, which are resistant to corrosion.

The features of Bosch meat grinders include the following:

• productivity - the devices are capable of grinding up to 1.8 kilograms of meat;
• high peak power - helps to deal with cartilage and veins;
• stainless knives - do not require sharpening;
• different diameters of grates, additional attachments - provide the multifunctionality of the device.

Moulinex

Meat grinders of this brand help to prepare high-quality minced meat from all types of meat. The devices have the following features:

• versatility of purpose - devices are used for cutting fruits and vegetables;
• high power - helps to cope with increased loads;
• self-sharpening knife - present in some models.

Philips

This Dutch company produces middle-class meat grinders.Its models are capable of grinding up to 1.7 kilograms of meat per minute. The features of the products include the following:

• IntraClean - is an opening compartment for cleaning the model from products;
• circuit breaker - protects the engine from overheating;
• several grates for minced meat;
• long cable - can be up to 1.8 meters.

Zelmer

Zelmer products also include many additional attachments to help you juice and chop fruits and vegetables.

Kenwood

This English brand is constantly improving its products. It is easy to operate, reliable and efficient. The price of brand products depends on the number of attachments, power parameters and productivity.

The characteristic features of the brand's products include the following:

• the presence of a coating against corrosion;
• heat sensor - helps to avoid overload;
• reverse - helps to clean the auger from tough meat;
• additional attachments.

REDMOND

The meat grinders of this brand are characterized by an attractive design. Product specifications differ depending on the model:

• power - is an important indicator that affects the volume of minced meat obtained;
• productivity - the meat grinders of this company are capable of grinding up to 2.7 kilograms of meat per minute;
• nozzles - the set contains several nozzles of different diameters;
• reverse, protection against overloads and electric shocks.

Polaris

It is a popular company that has been manufacturing household appliances for many years. The brand offers multifunctional meat grinders that help solve many problems. At the same time, the company is constantly developing, using more and more new design solutions.

The design and principle of operation of the electric meat grinder

Electric meat grinders include the following elements:

• frame;
• knife;
• lattices;
• fixing disc;
• pusher;
• engine;
• screw shaft;
• tray for products.

Also, meat grinders often include additional details. These include grates with different hole diameters, knives for forming shortcrust pastry. Also included are often sausage attachments.

The mechanism of the meat grinder is simple. Cut food should be placed in a special tray on top. Push the piece into the bushing with a pusher. Then it goes to the augers. Then the meat is pressed against the wire rack and cut with a knife. There are ribs on the shaft that help reduce large chunks of meat entering the mechanism. Smaller fragments are cut off from large fragments. Then they go to the auger.

Review of popular models

Considering options for faucets for use in the bathroom, it will not be superfluous to familiarize yourself with the rating of popular models.

Grohe Europlus 33547

The Grohe Europlus 33547 chrome-plated faucet is designed for wall mounting. A quality faucet has a classic gander shape and a ceramic shut-off valve.

Viega Multiplex Trio E3 684655

The electronic mixer with touch control is convenient for everyday use. The Viega Multiplex E3 684655 can be installed vertically or horizontally.

Jacob Delafon Talan E10105RU

Made of brass, the Jacob Delafon Talan E10105RU mixer is designed for use in a bathtub with a shower. The water flow is controlled by valves.

WasserKRAFT BERKEL 4833

A special feature of the WasserKRAFT BERKEL 4833 variety is the thermostatic control. The possibility of concealed installation of communications allows you to build the structure into the wall.

Dornbracht for Villeroy & Boch Square 25 943 910-00

Two-valve rectangular mixer for floor mounting. The shape of the spout is standard, intended for a bath.

Hansgrohe RainBrain 15842000

The Hansgrohe RainBrain 15842000 is equipped with a push-button control. The structure is designed for wall recessed installation.

Grohe Grohtherm 1000 34155

The thermostatic valve with ceramic shut-off valve is mounted vertically. The design of the spout is classic, with automatic switching between shower and bath.

Lemark Shift LM4322C

Rectangular mixer Lemark Shift LM4322C has three modes of water supply. The hose is made of metal and can be fixed to the wall.

Jado PerlRand Cristal H3981A4

Premium model with gold plating from a German manufacturer. The faucet has a sophisticated and unusual appearance.

IDDIS Classic 27014E1K

Double-grip mixer with flexible stainless steel hose. The shape of the gander is classic, the type of attachment is wall-mounted.

Teka MF-2 Forum

Single lever version with chrome finish. The swivel neck is designed for horizontal installation.

IDDIS Viola VIOSB00I02

The body of the IDDIS VIOLA VIOSB00I02 mixer is made of high quality brass. The package includes a flexible stainless steel hose and shower head with holder. The structure is covered with a layer of nickel and chrome for additional protection against mechanical damage.

Saneko CM-11.R-300-01

The Saneko CM-11.R-300-01 in-wall faucet is equipped with a single lever to control the pressure and temperature of the water. A three-position automatic switch provides added convenience in day-to-day use.

Bravat Fhillis F556101C-RUS

Sanitary set Bravat Fhillis F556101C-RUS is made of quality materials, which makes the product resistant to wear and corrosion. The faucet with softened rounded edges has a clean design and does not take up much space.

Vega Grand 91А1725122

The Vega Grand 91F1725122 brass mixer consists of a single-lever cartridge, a bath-to-shower switch, a cascade-type gander and a watering can with several modes of water supply. Flush mounting into the wall allows you to hide utilities and give the structure a laconic design.

Vidima Storm В7848АА

The Vidima Storm B7848AA tap is equipped with a single lever to control the temperature and the degree of water pressure. The design includes a swivel spout and a non-return valve. The mixer is designed for horizontal installation and can be used both in the bathroom and in the kitchen.

3> Grohe Multiform 32708

The Grohe Multiform 32708 mixer from the German manufacturer is made in a reliable brass body with a protective chrome coating. Swivel spout and single-lever controls simplify everyday use. The equipment is mounted vertically with two mounting holes.

Share link:

Views

When choosing a suitable mixer, first of all, it is worth deciding on the type of equipment. Different plumbing options differ in design, method of supplying and stopping the pressure of water.

Two-valve

In the design of the two-valve mixer, there is a valve-box, thanks to which the pressure and temperature of the supplied liquid are regulated. There is a small chamber inside the equipment for mixing hot and cold water. Mixed water flows out of the faucet spout, and the built-in strainer prevents liquid splashing. The main characteristics of the two-valve version include the following:

1. For installation of equipment to water pipes, special fasteners are used - eccentrics.
2. The gap between the underwater tubes should vary between 14.8-15.2 cm.
3. The main components of the design are valves mounted in the body. Above them, the handles are fixed with screws, which may differ in shape and design.

Single-lever

The characteristic feature of single-lever mixers is the presence of only one handle, which is used to control the fluid pressure and temperature changes.

Single-lever equipment is supplied with a ceramic or ball cartridge. Ceramic cartridges are made of two metal-ceramic coated plates. In ball cartridges, the adjusting head is in the shape of a ball.

Cascading

The internal mechanism of the cascade mixers is standard. The main difference is the shape and width of the spout, which creates the visual effect of a waterfall. The cascade mixer increases the volume of the liquid flowing out at the same time, which allows you to quickly fill the bath.

Thermostatic

Mixers with a built-in thermostat are created using modern technologies. The user-friendly equipment has a number of advantages, in particular:

• to control the temperature and the degree of water pressure, it is not required to rotate the valves;
• there is a function of setting a certain temperature independently of the central water supply;
• the security system eliminates the risk of accidentally burning yourself with hot water.

The main component of the thermostatic design is the mixing element, which is controlled by a cartridge containing bimetal and wax plates. The cartridge constantly monitors the temperature of the water and maintains it within the specified limits.

Contactless

Sensor models do not require direct contact for water supply. Most often, this type of mixers is installed in public places with high traffic of people. A special sensor is built into the equipment, which, using infrared rays, reacts to movement or heat. The device is triggered when hands are brought into the working area of ​​the sensor.

Combined

In the bathroom, single-lever or two-valve mixers are often used, to which a shower is additionally connected. It is better to use different mixers for the bathroom and washbasin. A suitable option is the single-lever design with a short head for quick water collection and with the option of switching to a shower. Plumbing can be supplemented with hoses for fixing the shower head on the wall.

By fastening method

Depending on the placement of the mixer, several varieties are distinguished. When making a choice according to the mounting method, you need to take into account the location of the bath, shower, washbasin and water pipes.

Wall mounted

The wall-mounted mixer fits deep into the wall, making it look compact and neat. This type is optimal for a small room, since it makes it possible to save space. Wall mounted devices can be used for showers, bathtubs, washbasins, sinks and bidets.

Floor standing

A feature of the floor type is hidden installation, due to which all pipes and connections are masked. The device is an elongated metal tube with a tap on the top.

Mortise

The bath tap has a hidden shower set, and only a watering can remains on the surface. If you need to use a shower, you will need to pull on the watering can and remove the hose.

Wall recessed

The advantage of built-in mixers is that all utilities are hidden in the wall. The design consists of valves and a shower head that protrude from the wall.

The device and purpose of the hygienic shower

A hygienic shower in the toilet is very convenient, compact and greatly simplifies hygiene procedures.

The drain is the toilet itself, so the shower should be arranged in such a way that it is convenient to use it: located at waist level, accessible. Such a hygienic device is especially suitable for those who have a small toilet room, and it is not possible to place both a toilet and a bidet at the same time.

Dimensioning and connection diagram for single hole bidet.

How is a hygienic shower activated? The mixer is connected to the shower head with a special reinforced hose, which should be no more than 1-1.5 m. Small shower head is called a shower head. A button is usually installed on its body, when pressed, you can control the water supply, adjust the pressure of the jet. A high-quality valve designed for short-term pressure is of great importance here, otherwise it can quickly fail. A shower with a mixer, in which a thermostat is built in, is very convenient to use. It is enough to set the required water temperature 1 time and not think about it anymore. Shower equipped with hairdryer is a success.

The mixer is made of metal with further chrome processing. The shower hose is made of modern plastic, maybe with metal inserts. The douche can be made of either metal or plastic.From above, it is usually covered with a thin layer of chrome. At the showerhead, a hole for water is made of rubber.

Tips and tricks for choosing

To choose a high-quality and affordable device, it is best to focus on the advice of experienced professionals:

1. Before buying a device, you should decide for what purposes it will be used. If the main task is the grinding of minced meat, it will be possible to do without additional attachments. If you plan to use the meat grinder as a multifunctional device, you should choose a product with various attachments.
2. When buying a model from a store, it is recommended to evaluate its noise level. Many devices make sounds so loud that it can be very uncomfortable to be around them. It should be borne in mind that in idle mode, the device is much quieter. When loading meat, the noise level will increase.
3. A meat grinder with a large weight is considered more reliable than a light device. This model includes metal parts. This helps to improve its functionality and make it more reliable.
4. The product must stand firmly on the surface. It is desirable that it has rubber feet.
5. Models from well-known manufacturers are considered relatively expensive. Moreover, they are of high quality. Plus, you don't have to worry about service issues. If the device breaks down, it can be handed over to a specialized service center without any problems.

Many models of meat grinders are known today. All of them differ in terms of power, performance, and the presence of additional attachments.

Share link:

What are the forms of the pallet

Manufacturers offer pallets to be installed against a wall or in a corner.

Wall-mounted

Wall-mounted shower tray configuration is used for enclosed shower stalls. The coating along the perimeter of the pallet allows you to place it along any wall of the bathroom.

Rectangular

The rectangular shape of the pallets is suitable for large bathrooms.

The square at the bottom of the enclosed cab is the most popular of all types of pallets.

Round

Round closed booths require a lot of space, but they have an advantage over other wall types: mold does not form between the wall and the booth.

Half circle

The semicircular tray gives the shower stall an original look and fits well into the interior of the bathroom.

Corner

The angular shape saves space. Open models are only installed in the corner to use ceramic wall cladding.

Rectangular

The shower tray is positioned to match the configuration of the bathroom: the longer side is parallel to the longer side of the bathroom.

Installing a hygienic shower

Installing a hygienic shower will not damage the interior, the main thing is not to forget to turn off the shut-off valve on the mixer.

Despite the various modifications of the models of the hygienic shower, the installation principle is almost the same in almost all cases, with the exception of small nuances. You will need the following materials and tools:

• hygienic shower complete with mixer, hose and shower, as well as a holder;
• electric drill perforator;
• drill bits for concrete;
• dowels;
• 2 metal-plastic pipes for hot and cold water supply;
• rubber gaskets;
• adjustable wrench;
• connecting elements for pipes.

When installing this plumbing, you need to think about global repairs only if you install a shower built into the wall. In other cases, large work will not be required. The whole process of installing this equipment can be divided into two stages:

• connections to communications;
• installation of the hygienic shower itself.

For connecting the shower to the water supply, select those communications that are closest to the installation site of the shower mixer. With the help of an adjustable wrench, rubber gaskets and pipe connection elements, water is supplied to the system.

The shower faucet is installed on the wall in a convenient place next to the toilet using an electric drill, dowels, fasteners supplied with the purchase of plumbing fixtures. To install a mixer built into the wall, you will need to chisel the wall with a drill-perforator, install pipes, and supply water. Then the wall is closed up and finishing work is done, for example, laying tiles. A holder for a shower handle with a hose is mounted on the wall using the fixing tools. It should be noted that with a shower built into the wall, a mini-sink is often installed in addition to avoid leaks.

The best shower cabins 90x90 with a low base

Another popular category of similar products is modern shower enclosures with a low base. They look much more elegant in comparison with those options that were made a few years ago. Low pallet, compact dimensions are preferred by unpretentious people who value simplicity and brevity. After analyzing the defining selection criteria, the experts named the 3 best shower cabins with dimensions 90x90, a low pallet.

River Tana 90

The domestic leader in the manufacture of shower cabins presented the best model from this category - Tana 90, which distinguished itself with a pallet with a height of only 15 cm, a siphon included, a non-removable tap, ventilation holes to avoid condensation. Additional implementations are 2 shelves, a metal overhead shower, a hand shower on a hose with 3 positions, a hand shower with a flexible hose, a mirror. The structure has a roof, swing doors made of impact-resistant glass (6 mm thickness).

Advantages:

• Large height 217 cm;
• Silicone-free assembly;
• Shower cubicle square open type;
• Safety toughened glass;
• Minimalist design.

Disadvantages:

• A swing door requires more free space;
• Frontal glass is transparent.

Externally interesting, unusual model due to its square shape, small dimensions and pallet will become a decoration of the bathroom. A low-budget, convenient option, but it is not quite suitable for a shared bathroom. The fact is that the door, the glass will not hide the bathing person from prying eyes due to the transparency of the glass, which means that only he himself can be in the bathroom.

Atlantis with hydromassage

Symmetrical hydromassage box Atlantis M-90 90 × 90 cm and height 215 cm is an excellent offer at a low price. The shape of the low pallet is a quarter circle, the full-walled structure is complemented by sliding doors. The walls are made of durable glass, the pallet is made of acrylic. The set includes a special watering can, built-in radio, shelf, lighting, and the main purpose is a tropical vertical shower, hydromassage.

Advantages:

• Hydromassage option;
• Radio;
• Low price;
• Tempered tinted glass;
• Extractor hood for quick drying;
• Backlight.

Disadvantages:

• Smell of plastic;
• The fragility of the components.

There are not so many reviews about this model, and those that exist emphasize the low price with good functionality and compact size of the box. Over time, it may be necessary to change the mixer, otherwise the product meets the needs of the buyer.

Grossman GR-121

Of modern, high-quality models, a good compact version with a low pallet is the Grossman GR-121 from a well-known German brand. Its main difference lies in the non-standard design, square shape, swing door. Inside there are 3 spacious shelves for cosmetics, a large mirror, anti-slip flooring. The frame is made of durable stainless steel, the door is fixed on steel hinges, glass with a thickness of 5 mm. The set includes a drainage system, which includes a siphon, a drain corrugation. The overhead rain shower is illuminated in the roof. There is also a hand shower with a flexible hose, 2 hydromassage jets.

Advantages:

• Durability;
• Stylish design;
• Additional features - radio, hood, lighting;
• Remote control on the console;
• Shelves, space under the seat;
• Wide functionality.

Disadvantages:

• Price;
• Seat sold separately.

An excellent option for those who value comfort and high quality. For maximum convenience, you can independently complement the box with a towel rack, a seat. Unlike cheaper offers, this option is very stable and spacious.

1 RAVAK ROSA RS 032.00 / 150

Most popular model
Country: Czech Republic
Average price: 4 970 ₽
Rating (2018): 4.9

The Ravak shower mixer from the Czech manufacturer is a technically sophisticated and safe sanitary ware. The combination of many years of experience, modern technology and first-class materials ensure good product quality. Single lever mixer ROSA RS 032.00 with ceramic cartridge, flexible hose and chrome finish will be the perfect addition to your bathroom. The device is convenient to use and easy to install, wall-mounted. Rosa taps can be combined with the rest of the RAVAK brand.

The model is incredibly popular among customers due to its easy installation and ease of maintenance. In the reviews, buyers note the reliability of the design, the stylish design and the compact size of the product.