DIY modern computer desk

Frequent assembly errors

To assemble furniture with your own hands, you need to pay attention to some secrets and nuances that will help you avoid frequent and gross mistakes. It is these annoying blunders that can reduce the quality of the product, its service life, appearance, and sometimes even ruin items.

It is important to consider the following:

the first aspect, which no instruction will tell you about, but which all assemblers know about, is to work with an assistant. An extra pair of hands and eyes will never be superfluous;
often computer furniture is made of MDF. It is a soft material, it is easy to damage it

Therefore, instead of a drill, it is better to use an ordinary screwdriver;
it is important to check the corners when installing the case and drawers. They must be strictly 90 degrees

Furniture should not be skewed. It is easy to check by level;
the loops should be tightly "fitted";
when attaching the back wall to the box, it is best to use self-tapping screws instead of nails;
the computer desk has holes that are closed with plugs. These small parts are easily lost, therefore they are recommended to be glued to the surface;
using a screwdriver can accidentally scratch furniture. If the elements have a protective film, it is better to remove it at the end of the work.

Assembling computer furniture takes time. Strict adherence to the instructions and accuracy will help to efficiently perform the work on its installation.

Use a screwdriver instead of a drill

Stick the plugs

Work with a partner

Materials used

Different materials can be used to make the round table yourself. This should include:

Particleboard and fiberboard are good options for making a budget option. Despite the cheapness of this design, with proper care, it will last a long time.

Using a tablecloth, you can hide the material used, and it will look no worse than a natural wood product.

Conifers provide an opportunity to make a quality product at minimal cost. Such wood is easily processed and can last for a long time.

Hard species of wood in the form of oak or beech will make it possible to make a truly high-quality product that will become the real pride of any room.

Such a table will have a decent look, it amazes with its massiveness and grandeur. You will have to try a little when processing this solid wood, but the result will not be long in coming.

This design will emphasize the status of the owner and his family members.

There are really many options. There are also modern solutions to the issue when using plastic.

How to assemble a corner computer table with your own hands: drawings and diagrams

Do-it-yourself assembly of a homemade corner computer table is practically no different from the above option. The difference lies in the presence of 1 or 2 pedestals with drawers, an add-on for a monitor or documents, a large tabletop with a curved cutout opposite the user's chair and a retractable keyboard board.

The main dimensions of the corner computer table made of laminated chipboard

Drawings of a computer table with dimensions and sawing details

The dimensions shown in the figure are approximate (except for the height and depth of the pedestals) and you can change them in accordance with your requirements and preferences. The worktop is best milled and filled with a plastic "T" -shaped edge. It will protect the ends from moisture and deformation. Also do the detailing as in the previous version with a straight table.

Sketch of a computer table for a PC with dimensions

How to assemble a computer corner table: step by step instructions

The hardest and most dusty job is cutting, sanding and routing the countertop.First, we mark the contour, taking into account the width and depth of the drawer unit and the stand for the "system unit". We make a hole in the corner of the tabletop for the cable channel. We fill a "T" -shaped or regular PVC edge with a thickness of 2 mm around the perimeter.

Corner table top markup

After the tabletop is completely ready, we can start marking and drilling the rest of the parts. It is better to immediately number the details in accordance with the detailing - this will make it much easier to assemble the table. Then we act according to the following algorithm:

1. We collect the boxes and install the halves of the guides on them.

   Drawer assembly diagram and guide installation

2. We assemble a cabinet for drawers, which consists of 2 sides, a shelf, 4 ties (upper and lower) and a back wall made of fiberboard (stuffed last after installing the facades and joining into a single structure).

   Dimensions for installing roller guides

3. In the same way, we collect the section for the system unit.
4. We make an angular support post, which we connect with wide drawers to two already assembled functional blocks.
5. We attach furniture corners to the curbstones, supporting structure and sidebars.
6. We install the table frame at the place of operation, taking into account the necessary clearances and deviations. We attach the tabletop to the structure, mark the place of attachment of the strips with guides for the keyboard board and mount it to the inner surface.
7. We insert boxes into the curbstone and check their progress. If the guides stick or knock, we check what is the reason, it is possible that this is a skew. We fix installation defects and if everything is fine, then proceed to the installation of facades and countertops. Lastly, we stuff the back wall of the drawer unit.
8. Assembling the monitor stand and add-ons (if any). That's it, the table is ready and you can start using it.

Monitor stand

We find out the goals and objectives

You set the parameters of your computer desk yourself.

Tables are different. Big, small, empty, stuffed with various shelves. The successful choice will depend on how well you define your goals. For example, are you planning to use a laptop, a stationary computer with all its components? What will you do in the workplace (write articles, program, keep accounting, model, do video editing, etc.). There can be a lot of tasks. And based on your list of needs, you should make a deliberate choice of a computer desk. Let's say the choice falls on a stationary computer. Its components include a system unit, monitor, keyboard, mouse, speakers, modem, printer and various other additional devices. Based on this, calculate the required number of shelves. Another important point is the materials for making a computer desk. The most common inexpensive working material is chipboard. Of course, there are also expensive options.

Choice of countertops

Before making a desk with your own hands, you also need to decide on the configuration of the tabletop. Products are:

1. Rectangular. This option has good spaciousness and fits into any interior. But it is not suitable for small rooms, since it takes up a lot of space.
2. Radial. Such countertops are often installed in apartments where several children live. Their use is possible only in the presence of a large area.
3. Corner. They allow you to use the entire space of the room. Outlines can be symmetrical or in the shape of the letter G.

Rectangular
Radius
Corner

As for the material of manufacture, there is also a choice.

You can also make a structure with a glass top. This material is resistant to wear and tear, makes the furniture original and light. However, traces are constantly left on the glass, so it has to be washed and polished frequently.

Laminated chipboard
MDF
Wood

How to make a children's table with your own hands

A very simple option, with the help of these step-by-step photos you will learn how easy it is to make a children's table with your own hands. The dimensions are not indicated here, you can determine it yourself, let the child put his elbows on the table and reach his temples, the back should be straight. This will be the optimal height for your table.

If you want to approach the question competently, use the table. The manufacturing process is shown in some detail, so that with the necessary tools it will not take much time.

How to make a children's table and chairs in pictures

Making your own children's table and chairs is not difficult if you have the appropriate tools and accessories. This article provides many examples with step-by-step photographs, but for greater clarity, I present also a master class with step-by-step pictures.

There is such a wonderful site WikiHow, here, like in comics, the process is depicted very colorfully.

Children's table with shelves

You can make such a table with shelves yourself, without especially ruining the family budget. If your kids love drawing and handicraft, the shelves will come in very handy. Therefore, the idea of ​​putting a table in a locker is very functional. How to make such a gift for children, look at the step-by-step photos with the indicated dimensions.

How to make drawings of computer tables correctly

Of course, as a computer desk, you can use a student's desk or a standard office desk, from those that stood in offices 15-20 years ago. But taking into account the many additional devices, for example, a printer, MFP, and many gadgets that connect to the system unit or laptop, you will quickly realize that it is very difficult to sit in such a space for full-fledged work. In addition, the child will need to do homework at the same table, that is, draw, read, write.

It is necessary to make such a table so that it has as much useful surface as possible, not occupied by technology. And all the devices - monitor, system unit, etc. - will be in their places, and at the same time they will not interfere at all.

We will consider the option of a fully functional computer desk that you can make yourself at no extra cost.

First of all, you need to create a drawing in which the dimensions of the entire structure will be taken into account. You can see a detailed drawing of the computer desk in the picture:

As you can see, this is the simplest, classic table shape. Straight lines, conciseness, and at the same time full functionality. Such a table consists of a table top, a stand for a system unit, a pull-out keyboard, pedestals and shelves.

After you have decided on the required dimensions for your computer desk, using a drawing, make a list of everything you need and start shopping.

Diy photo of computer tables

We also recommend viewing:

• DIY stool
• Do-it-yourself door decoration
• DIY cornice
• DIY folding chair
• DIY pouf
• DIY folding table
• DIY gate
• Phone shelf
• Decoupage furniture
• Eccentric furniture
• DIY sun lounger
• DIY armchair
• Padding of chairs
• Do-it-yourself housekeeper
• Garage racks
• DIY shelves
• Telescopic guides
• Bench table
• DIY chair
• DIY hanger
• Folding bed
• Do-it-yourself wardrobe
• Furniture assembly
• DIY children's table
• Oak furniture
• DIY sliding table
• Furniture hinges
• Saw cut wood table
• Folding table
• DIY wall panels
• Laptop table
• DIY folding table
• How to make a bed
• DIY shop
• Do-it-yourself hallway
• Cottage furniture
• How to upgrade furniture
• Bench with back
• Picnic table
• Bath furniture
• DIY garden swing
• DIY flower stand
• Pallet furniture
• Decor for furniture
• Furniture restoration

We make a computer desk add-on

In order to make a full-fledged multifunctional computer desk, the instruction provides for the presence of not only countertops and shelves for additional devices, but also an add-on, which will also perform a decorative function.

1. Mark and cut out the side structural elements, round off the front upper sections with sandpaper. In order for the sides to be evenly fixed on the table top, make a preliminary template, the thickness of which will be 18 mm. Drill holes in its ends. Attach the manufactured ends to the table top and mark the fasteners.
2. The marked holes should be drilled according to the following scheme: through - in the table top, blind - in the lower ends of the side walls. At this stage, you will need a square to help you keep the angles correct. Install the side pieces on the countertop using the alignment square.
3. Screw in the self-tapping screws under the countertop, aligning the holes in the cover with the slots at the ends of the sidewalls. Then take a 400 X 2000 mm board and cut it lengthwise. This will give you a 315 mm wide top shelf and a securing cross bar.
4. The middle vertical wall must be cut out of a 200 X 2000 mm board. Attach it to the countertop in the same way as the large sidewalls, controlling the connections with a square. Screw the back rail to the sides and place the top shelf on the end of the center wall. Align and screw with self-tapping screws.
5. Now you need to make the left shelf. For it, you need a shield 200 mm wide. This shelf is designed for a printer or MFP, which means that it must be strong and voluminous enough.

The simplest table made of boards with your own hands: assembly on self-tapping screws

Let's analyze one of the easiest structures to work with: a rectangular table with four square legs, a sideboard made of a board, without additional parts.

For a table with dimensions of 80x120x70 cm you will need:

• timber 40x40x680 mm, 4 pcs;
• board 10 ... 20x76 mm, 2 pcs. length 650 mm and 2 pcs. 1050 cm;
• board 20mm, length 1200mm. Depending on the width of the board, the required amount is selected until the total width of the tabletop is 800 mm (8 pcs. 100 mm, 4 pcs. 200 mm);
• board for strengthening the corner joints of the drawer side, section 20x75 mm, 4 pcs. length 100 ... 200 mm;
• wood screws 20 ... 50 pcs.

Important: in this model, the parts are fastened using self-tapping screws screwed at an angle. To maintain a uniform angle for all drilled holes, it is convenient to use a simple device - a jig.

Assembly sequence:

after trimming the parts to size, the frame is assembled - the drawer side and the legs. To do this, the parts are placed on a flat, smooth surface and temporarily fastened with clamps (when working with an assistant, there is no such need). It is convenient to perform operations one by one - two tsars and a leg. It is necessary to maintain the right angles between the drawers as accurately as possible. To connect the elements, holes are drilled at an angle and the parts are fastened with self-tapping screws;

after assembling the frame, it is necessary to reinforce it in the corners. For this, you can also use metal plates or, as already suggested, a board. If the second option is used, the edges of the board are cut off at an angle of 45 degrees for a snug fit to the sidebars, after which the board is screwed in with self-tapping screws;

the prepared frame is checked for stability, if necessary, the length of the legs is adjusted;
arrange the tabletop by fixing the boards to the frame

For this, as well as for attaching the legs to the sidebars, self-tapping screws and holes drilled at an angle are used.

Important: the length of the self-tapping screws is selected so that they do not go through the tabletop!
The end of the work will be the processing of wooden parts with varnish or paint.

Calculating the size of a computer desk

It is more difficult to calculate the dimensions for a corner computer table, so first we will consider just this option.

Corner table dimensions

Factors that affect the size of the table:

• Tabletop width. The minimum worktop width is 50 cm (500 mm). The optimal size is 60 cm (600 mm).
• Width of sections (which are table supports). Different section widths for each table. If it is a processor tray - 20-25 cm (200-250 mm). If tray with drawers or door - 45-60 cm (450-600 mm).
• The depth of the corner (where the person is located). The minimum size is 50 cm (500 mm), the optimal size is 60 cm (600 mm).

Common overlaps listed above -

• tabletop width - 50 cm;
• corner depth - 50 cm;
• width of sections - 20 cm and 45 cm;
• 5 cm + 20 cm + 35.4 cm + 50 cm = 110.4 cm - the length of one wing of the table;
• 5 cm + 45 cm + 35.4 cm + 50 cm = 135.4 cm is the length of the second wing.

Optimal table size

• tabletop width - 60 cm;
• corner depth - 60 cm;
• section width - 25 cm and 50 cm;
• 5 cm + 25 cm + 42.4 cm + 60 cm = 132.4 cm - the length of one wing of the table;
• 5 cm + 50 cm + 42.4 cm + 60 cm = 157.4 cm is the length of the second wing.

Optimal table size

• with one tray: 5 cm + 5 cm + 25 cm + 60 cm = 95 cm;
• with two trays: 5 cm + 5 cm + 25 cm + 50 cm + 60 cm = 145 cm.

The table height varies from 70 to 76 cm.

Note! It is not recommended to make a table higher or lower than the prescribed size, as this will lead to an incorrect body position when working at a computer, the development and exacerbation of diseases of the back and spine.

Computer furniture assembly technology

First, you need to lay out all the details on the surface where the furniture will be assembled. This can be a floor covered with a protective film, or a special podium. It is recommended to clean the parts from dust. If we are talking about mounting a computer table, then it is more rational to start with a "box", that is, to assemble the bottom of the table (stand), side walls and table top. In this case, the structure will receive stability

Before starting such work, it is important to check whether the frame will have guides along which the rollers of the drawers "slide". Once the frame is ready, you can start working on the shelves, and then move on to the drawers.

Furniture body assembly technology boils down to two simple rules:

1. Without a rigid attachment to the frame, the structure will disintegrate like a house of cards. It is necessary to strictly fix the angles at 90 degrees;
2. Any horizontal surfaces that are about a meter long sag without supports. Therefore, partitions supporting, for example, a tabletop, should be mounted together with the frame in the first place.

Assembling computer furniture is not as difficult as it might seem at first glance. Errors will not occur if you strictly follow the diagram and drawings.

Spread the pieces on the floor

We collect the box and other large parts

Create a computer box or guides for it

Installing the back wall

We collect boxes

We fasten the guides, and to them the already assembled boxes

We mount shelves

Installing the keyboard stand

We connect all the large parts

If there is a laptop in the house

We have disassembled how to make a computer desk on our own. But what if there is a laptop instead of a computer in the house? It would seem that the thing is quite mobile and does not require additional stands. But, as practice shows, lying in bed or on the couch with a laptop in hand is not always convenient.Therefore, now we will make a laptop table with our own hands.

The easiest and free option

First of all, we will consider a design that does not require special construction skills and not a penny of financial investments. It is tempting to make such a table for a laptop with your own hands. You can use parts of old furniture, remnants of repairs and other scraps of any building material.

You only need three parts: 2 side pieces and a table top. Its size will depend on the size of the vehicle. We will be making a 270x660mm tabletop. cutting it out is simple, the main thing is to measure it exactly.

The side slats will be a little more difficult: they should have a beveled side, which is attached to the tabletop. The dimensions of the side walls are 270 × 205 × 255 × 280 mm. it turns out that the back of our table will be raised by 280 mm, and the front, lowered by 205 mm. Thus, a small do-it-yourself computer desk for a laptop will have a slope, which will make it very convenient to work with.

The side parts are attached to the tabletop with self-tapping screws and are additionally reinforced with small corners. This increases the strength and reliability of the structure. It remains only to paint or trim it to your taste and preferences. There is nothing difficult in such a design, and if a person likes to practice or have fun reclining, then why not think about how to make a table for a laptop with your own hands.

Another way: a folding table for a laptop

The folding design of the table is a little more difficult to make, but if you often have to move from place to place, you should think about how to make a table for a laptop convenient and mobile. The following materials and components will be required:

• countertop material;
• side wall material;
• screws or self-tapping screws;
• 4 hinged mounts with a lock.

Any material that is available can be used as a material. We cut out a tabletop 600 × 400 mm, side legs - 400 × 310 mm. Using a ruler and a pencil, mark on the inside of the tabletop the places where the leg mounts are installed. We make holes for screws, we fix everything securely and that's it - our do-it-yourself computer desk, the photo of which you see is ready.

As you can see, there are a lot of ways to make a computer desk with your own hands. The article discussed only the most accessible and simple ones. But there are craftsmen who are able to create such furniture that you will not find in any store.

Well, for clarity, watch the video on how to easily and quickly make a computer desk with your own hands, using the information of which you will cope with the problem easily and naturally.

Video:

Video:

Video:

Video:

Video:

Choosing a place

The table can occupy the corner of the room or stand along the wall.

The comfort in the room will depend on the correct location of the table. If the room is small, of course, it would be unwise to put a large table here. If the room can accommodate large furniture, a small computer desk may not seem like the most functional furniture option. It is worth focusing on the following aspects before placing furniture in the room:

The computer desk serves as a carrier of computer equipment, which, of course, needs power supply.

This means that it is important to place the table next to the outlet.
It is advisable to work at the table during consecration. There is no better light for work than daylight. Therefore, it is worth organizing the arrangement of the table so that the light from the windows falls on the left side of the computer area.
Computer equipment on the table already obliges you to get rid of unnecessary heating objects in advance, which can cause a short circuit, a fire. It is extremely unreasonable to put a table near a radiator, fireplace, electric heater.
It is recommended to free the occupied space from other various objects (paintings, shelves and decor items).

You can choose a model of a hinged table, which in case of need you can raise and free up space.

Tables are divided into several types: straight, corner and combined. Let's take a look at each option in order.

Even an easy-to-make table can look elegant.

Shelves can be either above the table or under the table.

Step-by-step manufacturing algorithm

First you need to develop a design project. If you have no experience in drawing up furniture drawings, you can use ready-made options. Below is a master class that will greatly facilitate self-assembly. Necessary materials:

• system unit;
• table of the right size;
• tempered glass (can be replaced with plexiglass);
• cooler (6 pcs.);
• speakers;
• LED Strip Light;
• required wires;
• carbon sheets;
• voltage regulator;
• jigsaw;
• sandpaper;
• dye;
• LED strip or LEDs;
• wood glue.

Sequencing:

1. Creating a computer desk begins by removing the existing tabletop. We measure horizontally twice 10 cm - these are the blanks of the upper and lower panels. The same measurements are taken vertically on the remaining surface. These strips will be attached to the sides.
2. In the existing side parts of the table, three holes are drilled for 80 x 80 coolers with the same distance from each other. Be sure to sand the edges to remove any roughness.
3. If desired, the side walls can be cut at an angle, the narrow part should be located at the bottom.
4. We glue the panels cut from the table top. Everything except the top. We fence off the cable channel with a lattice up to 20 cm wide.
5. We remove all debris with a vacuum cleaner. Then all surfaces are painted over. It is better to choose black matte color. It will take about a day for the paint to dry completely. Then you can paste over with carbon.
6. We fix the LED strip around the perimeter. We install and connect coolers. If necessary, a video card and a motherboard are also supplied with backlighting. So that the glass table does not tire the eyes, all the wiring is connected to the clock switch, which is displayed on the side panel.
7. Speakers are inserted into the holes prepared earlier. The contents of the system unit are moved to the internal space. The operability of all systems is checked. All excess wires are removed into the cable channel.
8. The necessary technical holes are made in the front of the table.
9. The glass is installed on transparent glue.

The table-system unit, created by your own hands, has no analogues. The placement of PC content should be treated very carefully. In the absence of the necessary skills, it is better to contact a specialist who will help you correctly connect and fix all the parts.

Remove countertop
Drill holes for coolers
Remove all trash
Paint over all surfaces, leave to dry
Paste with carbon
Fix the LED strip around the perimeter
Install and connect coolers
Cooler illumination
Graphics card backlight
Motherboard
Insert speakers into the previously prepared holes
Check the performance of all systems
Remove all excess wires into the cable channel
Make the necessary technical holes in the front of the table
Place the glass on transparent glue
Ready PC in the table
Backlight at night