How to fold a sheet with an elastic band in just 30 seconds: step by step instructions

4 ways to fold a sheet with an elastic band step by step

It turns out that even a sheet can bring in a million dollars in income. This happened to Giselle Jubinville when she solved the problem with the linen slipping from the bed with a sewn-in elastic band.

But having solved one problem, Giselle created the next - she did not explain how to fold the sheet with an elastic band compactly and quickly.

We will eliminate this drawback and tell you about several easy ways to fold this bed "miracle".

A sheet with an elastic band is a salvation for everyone who sleeps restlessly, tossing and turning in a dream, knocking the sheet off the mattress. It allows you to sleep comfortably on an even bed without a single fold. But such a wonderful thing is extremely inconvenient when folding - it puffs up, takes an incomprehensible shape and therefore takes up a lot of space in cabinets or dressers.

To save space, you need to master several methods of folding such bedding.

Give the shape of a rectangle:

On the long side, connect the corners by putting them one into the other. The sheet has been halved.
Repeat the steps until all the corners are together.
Fold the resulting rectangle in half, evenly connecting all the ends.
Mentally dividing the resulting package into three parts, fold the sheet to one size.

Fold in rectangle to create a pocket.

First option:

Fold the sheet over the wide horizontal side.
Lay on a table or bed.
Bring one part to the middle, cover the other two, leveling the ends.
Place the “piece” of the roll with an elastic band in the middle, smooth it out, roll it up again.
Turning over to the other side, place the conditional third part in the first, which is a pocket.

Second option:

On the long side, fold the corners one into the other, repeat the process with the resulting double corners.
Also, on a horizontal surface, fold a bundle equal in width to one part of the existing one.
Bring the bulkier part (with an elastic band) to half.
Fold the lower rectangle in half and put it in the pocket formed from the upper part.

Iron folding method

How to fold a sheet with an elastic band while ironing it to the size of a folded duvet cover from the same set:

Insert all the corners into one another, as in all previous cases. It is necessary to ensure that the seams of the corners match.
Put the resulting "hood" on the ironing board.
First, stroke the four petals of the folded ends alternately. They must be tightened during ironing.
Iron the corners.
Then proceed to smoothing the main area.
Turning the sheet over, process the corners (since there are no petals here), then the remaining space of the product.
On the long side of the roll, fold the sheet in half.
Attach an ironed and folded duvet cover, determine the width, wrap the excess part inside.
Iron the resulting long rectangle.
Visually divide into three segments, bend the first, lay it on the second and cover with the third.
Unfolding again, bend each part in half towards the center. You will get a briquette equal to the duvet cover.

Ironed items take up less space in the cupboards.

The subtleties of order in the closet

If the distance between the long shelves is small, place each set in a separate stack.
The vertical arrangement will save space.
To avoid confusion, use the pillowcase from the kit as a pocket for the rest of the components.
Shelves can hold stacks of duvet covers, sheets and pillowcases. This is convenient if the linen is in the same color.

In the absence of wardrobes, linen sets can be stored in drawer drawers, boxes or baskets.They can be placed in the form of rolls or bundles tied with tape.

Now you know 4 ways how to compactly fold a sheet with an elastic band. Be sure to try each one and determine which one is easier and more convenient for you. By the way, there is a fifth option: fold the product in three, and then carefully roll up a dense roll. We wish you a restful sleep and perfect order in your wardrobes!

Ways to secure the sheet on the bed or couch

There are many ways to securely fix the sheet on the mattress, you just have to choose the right one

In general, when considering ways to fix the sheet on the bed, we can distinguish two main areas among them. One of them involves the use of fasteners. The second direction is to change the shape and size of the bed linen itself. Here are some of the ways to secure the sheet to the mattress.

Use special clips made of wide elastic bands with plastic or metal clips at the ends; they can be purchased both online and in stores.
Serrated holders for curtains are used, working on the principle of clothespins (crocodiles).
They use clerical clips that can be used to attach fabric to some types of mattress toppers.
Ribbons or elastic bands are sewn to the corners of the sheet, with the help of which the sheet is pulled onto the mattress and fixed from below.
They purchase ready-made sheets with an elastic band sewn around the edge or alter the bedding themselves.
Sew on buttons and loops, or sticky tape to sheets and mattresses.
A separate piece of bedding is used, which consists of an elastic band and a fabric; it is worn over the sheet and stays on the side walls of the mattress.
A large sheet is selected, the edges of which can be bent far under the mattress.

Sew a sheet with an elastic band step by step

Here are the steps to follow to achieve our goal of sewing an elasticized sheet:

1. After we have chosen and bought the fabric, we measure the required width and cut off the excess, it is better to do this on the floor, hardly anyone has a table with a length of two and a half meters. In general, we cut bed linen on the floor in a large room of an apartment or house.
2. Having laid out the piece of fabric we need with the front side up, take it by hand at one corner and apply the fabric so that we get a triangle with an acute angle.
  
  We combine the sides of the fabric as evenly as possible and measure from the corner along the large side of 27 cm, set a point with chalk for the fabric and measure the second side of the isosceles triangle from it at a right angle - 27 cm, this point should coincide with the edge of the fabric, draw a line.

1. To prevent the fabric from accidentally moving, we fasten it with pins along the drawn line. We retreat from this line towards the corner of 1 cm (per seam), take scissors and cut off the folded corner. The cut square should be 26 cm sides.

1. Then everything can be done easier. Fold the fabric lengthwise, overlaying the cut out corner on the opposite one, align the fabric as accurately as possible, secure it with pins and cut out the corner according to the pattern.
2. Then we fold the fabric in half, precisely align the cut corners with the uncut corners, we also fasten with pins to prevent the fabric from shifting and carefully cut the corners.
3. As a result, we have cut out all four corners of the sheet, now the sides of the corners need to be sewn. Since we do not have an overlock, we will sew it with a linen seam. To do this, fold the fabric of the first corner with the wrong side out, align the sides of the corner and wrap the edges of the fabric by 5 mm and turn it again so that the edges of the fabric go into the seam.

1. You can again use pins and pin the rolled-up fabric across the seam so as not to interfere with the sewing machine. Depending on the thickness of the fabric, we choose the stitch pitch, the thinner the fabric, the smaller the pitch, for example, for satin we use 2.5 mm, for calico 3.0.
2. We sew each corner of the sheet with an elastic band, do not forget to bartack the seam at the beginning and end, for this we make two steps of the needle back, then we sew forward, and at the end of the seam, vice versa.And then your seam will never come undone.

1. We are entering the home stretch, we just have to tuck the fabric and insert an elastic band. We take an elastic band for the most common linen, we need it two lengths of your mattress, if you have a length of 200, then elastic bands need 4 meters, for my sheet 3.8 m.
2. We begin to sew the edge of the sheet from any place convenient for you. We take the edge of the fabric and tuck it 7-8 mm, then wrap it again by 15 mm, pin it with a pin.
3. If you have no experience or are afraid to make a mistake, then you can pin about a meter of the future seam with pins, stitch it, then stab it further and so on until the first pin. We leave it in place, it will help us navigate and fix the seam without reaching 5 cm.

1. We will use this hole to insert the rubber band. We measured the required amount of elastic and use a safety pin to insert the elastic into the sheet. At the end of the edge of the elastic, we sew a couple of seams for fidelity, and the hole can also be sewn up.

We distribute the fabric of the sheet evenly over the elastic and that's it, our product is ready. A self-made sheet with an elastic band will delight you and serve you for a long time.

We cut the fabric on the floor, and before us it was kept in the warehouse on the rack. I’m not even mentioning where it was not lying in the factory and whoever didn’t touch it with their hands, so we send our sheet with an elastic band first to the washing machine, then we iron it and put it on the mattress.

How to fold a sheet with an elastic band: 5 simple and effective ways

How nice it is when bed linen lies in the closet in even piles or rows.

But if there are no problems with folding the usual sets, then not everyone can smoothly fold the sheet with an elastic band. Instead of an even rectangle, a shapeless lump is obtained.

But there are at least five ways to neatly fold the sheet with an elastic band without unnecessary difficulties.

Fold into a compact rectangle

An easy and convenient way to turn an elasticated sheet into a compact rectangle.
Folding order:

We shake the sheet so that it straightens out, turn it out.
On the short side, we insert our hands into opposite corners.
We connect our palms so that the corners touch.
We transfer the sheet from the left hand to the second, putting one corner on the other.
Now the canvas, folded in half, is held on the right hand.
With our left hand we lift one of the corners that remained below and put it on over the two already folded.
We do the same with the last fourth corner.
We shake the canvas folded in four, we have a rectangle.
We put it on a bed or table and smooth it with our palms.
We mentally divide the canvas into three equal parts along the length.
We wrap both side parts one at a time to the center.
Now we fold the resulting strip three times.

Tip It is convenient to store sheets by placing the resulting rectangle vertically in the chest of drawers. In this case, at the last stage, the canvas must be folded four times: first, bend the edges to the center, and then fold like a book.

The second way to fold into a rectangle

This method will also create a nice rectangle, but the process is slightly different:

We lay out the sheet on the bed so that there is access to all four corners.
We fold it in half, putting opposite corners into each other, for this we turn out one corner, insert our hand into it and set it to the opposite corner.
We insert our hands into the two resulting corners, raise and straighten the canvas.
We connect our hands and insert one corner into the other.
Put the resulting rectangle on the bed with the rubber bands up.
Smooth and fold in three times, wrapping the sides.
Now we fold the resulting rectangle three or four times in length.

Fold in a square

This method is no less simple, it allows you to get neat squares that are convenient to store both on a shelf and in a drawer.
Procedure:

Shake the sheet, fold it in half along the length.
Lay out on the bed, you get a detail that resembles a bean bean in shape.
Bend one side along the length towards the center, then the other, forming a not very neat rectangle.
We mentally divide the resulting part into three parts horizontally, bend first the lower part, then the upper one.
We unfold the resulting rectangular piece with the short side facing us.
Bend the lower part up.
We form a "pocket".
We fold the upper part and put it in the resulting "pocket".
We turn the resulting square over and smooth it.

We roll it up and tie it with a ribbon

You can fold the sheet into a roll; in this form, the linen takes up little space. Procedure:

Spread out, then carefully fold the sheet three times so that the elastic is on top.
Roll gently from one end.
To prevent the roll from unfolding, it must be secured with an elastic band or tied with a ribbon.

We roll up into a roll without using a ribbon

This is a more sophisticated method and is suitable for soft fabric bedding. It does not hold its shape well, so it looks sloppy when rolled into a regular roll.

Procedure:

Fold the sheet in half along the length, the elastic should be on the outside.
We wrap vertically alternately on both sides.
You will get a long, but not very even rectangular piece, on the short side of which a "pocket" has formed at the bottom.
We fold the canvas into a tight roll, starting from the side opposite to the "pocket".
We turn the pocket in the opposite direction - now the roll will not unfold.

It is worth mastering any of the folding methods, then there will always be perfect order in the linen closet.

How to fold an elasticized sheet neatly

You can compactly fold the sheet with an elastic band in several simple options. All of them will allow not only to preserve the neat appearance of the product, but also save a lot of space in the closet.

The first way, how to properly fold the sheet with an elastic band

The easiest and at the same time convenient way to fold bed linen with an elastic band is to give this product the shape of a rectangle. The addition process itself consists of the following steps:

First, the bed is turned inside out, straightened and grasped on the smaller side of the opposite corners.
They put the corners into one another, then take the lower corner. They also put it in the upper corners. This action is repeated with the fourth corner. Thus, you should get a rectangle.
Put the resulting rectangle on a horizontal surface with the elastic band up and begin to fold. First, one side is wrapped, then the other. The resulting bundle is folded another 3 times.

The video clearly shows how to properly fold the sheet with an elastic band according to the first method.

Step-by-step photos of the method of folding the bed in the form of a rectangle

The second way, how to beautifully fold the sheet with an elastic band

The second life hack, how to neatly and beautifully fold a sheet with an elastic band, is almost identical to the first method, but the process itself is different:

To begin with, the sheet is straightened and folded in half, turning the corners inside out on one side and inserting them into the corners on the other side.
Then they push their hands into the resulting corners, lean them against each other and turn one side so that the corners are inside the opposite corners.
The bed is laid horizontally with an elastic band on top and folded, starting from the bottom 3 times.
Then, grasping one edge, fold it in several layers so that you get an even rectangle.

Step-by-step folding process according to the second method

The third way, how to fold a stretch sheet with an elastic band

You can fold things very carefully if you use the "pocket" technique. To do this, you must adhere to the following actions:

First, the product is taken in hand so that it is folded in half along the wide horizontal side.
Then the item is placed on any surface and folded. First, one side is bent vertically, then the second. You should get a rectangle.
This rectangle is folded 2 more times horizontally, starting from the bottom edge.
Then one side edge is folded over. A pocket is formed and the second edge is inserted into it.

Below is a step-by-step scheme, according to which it will not be difficult to fold a sheet with an elastic band with a "pocket".

Diagram of the most convenient way to help you fold this type of bedding neatly

The fourth way, how to beautifully roll a sheet with an elastic band

If there is no need to fold this sleeping accessory evenly in order to place it on a shelf, then you can resort to another simple method that allows you to store bed linen in an upright position. This method is especially relevant for an oval sheet with an elastic band, which allows you to fold it without effort.

Execution steps:

The thing is straightened and folded in half so that the elastic is outside.
The edges are folded towards the middle. In this case, a pocket should form on the reverse side.
Then the roll is rolled up and then the formed pocket is turned inside out.

Attention! This method is more suitable for sheets made from soft fabrics with an elastic band around the perimeter.

Thanks to the roll-up, it is much more convenient to store soft cloth accessories

It can also be folded into a roll according to the following option:

The sheet is straightened and folded 3 times so that the elastic is on top.
Then, starting from one edge, roll it into a roll.
The resulting roll is optionally tied with braid so that it does not straighten.

It is convenient to store such rolls in special boxes for linen.

How to fix the sheet: the choice of holders, clips, clamps

There are several options for how to secure the sheet to the mattress so that it does not slip.

Elastic, adjustable holder with metal clip

The bedclothes holder is perhaps the most versatile and durable bed sheet holder invented to date. Bed sheet holders come in a variety of configurations, the most common of which are two-ended and three-ended.

Double clips consist of an elastic band of various colors with a pair of metal or plastic clip tips. Clips attach to the sides of the sheet and create a gentle, adjustable tension. The elastic band on such clamps can stretch up to 30-150 cm, depending on their original size.

The set of double holders is suitable for additional securing of the sheet

The triple holder has an additional elastic module with a clip. This allows the corner to be attached, which significantly improves the aesthetic appearance of the bed.

Adjustable triple sheet holders

A lazy way to properly sew a sheet with an elastic band

If you are tired of your bed sheet always slipping off the mattress, and you have the most primitive sewing skills on a sewing machine and a pair of hands, then today I will show you the easiest way for the lazy to sew a sheet with an elastic band. Such a sheet will definitely save you a lot of nerves in the morning and during sleep, as well as you can choose the fabric to match the curtains or wallpaper, for example, and, in addition, save the family budget. I do not like long and difficult master classes, so today my lesson was done in exactly 30 minutes.

I will sew a sheet with an elastic band on my double mattress, the dimensions of which are 150 * 200 cm, but if you have a mattress with different parameters, do not be discouraged. In this master class, I will show you how to make a pattern for any bed size.

My advice is to buy fabric for the sheet, preferably solid, but at the same time pleasant to the body. Thick cotton, satin is best suited for sewing bed linen.Calico is a more economical option, it is less dense and wears out faster, but it is also used for this purpose.

In order to sew a sheet with an elastic band myself, I needed:

Satin fabric 2 meters (with a fabric width of 2.5 m.)
Linen elastic in a skein
Threads to match
Sewing tools: scissors, safety pin, chalk, tape measure

Fitted sheet pattern

Before buying a fabric for a sheet, so that it completely wraps your mattress and does not slip, you need to take the necessary measurements.

a - the length of the berth. I have it equal to 200 cm.

в - the width of the bed. I have a mattress width of 150 cm.

c - the height of the mattress rim. My side height is 15 cm.

Now you can build a pattern of the sheet with an elastic band. I draw it directly on the fabric. First I draw a rectangle with sides.

A = a + 2 * c + 20 cm. I got = 200 + 2 * 15 + 20 = 250 cm.

B = b + 2 * c + 20 cm. I got = 150 + 2 * 15 + 20 = 200 cm.

Then, at the corners of the rectangle, you need to cut four squares with sides

C = c + 10 cm. I got squares with sides = 15 + 10 = 25 cm.

In accordance with my calculations, for sewing a sheet with an elastic band, I needed a piece of fabric 250 * 200 cm. The store sells fabrics for bedding with a material width of 250 cm. Therefore, you need to buy a piece equal to two meters.

How to sew a sheet with an elastic band step by step

1. The first step is to decorate the fabric or iron it with a steam iron to prevent further shrinkage after washing.

2. First you need to connect the corners of the sheet. And overcast the resulting cuts with a zigzag stitch or overlock so that there is no shedding.

Do not pay attention to the pieces of white fabric at the edges, this was not enough for me the width of the material, because in the store I took the remainder of the fabric equal to 1.80 m, because of this I had to make extensions, but they will remain on the sides of the mattress in the form of a piping.

3. Form a hem for the elastic. To do this, I bend the outer edge 1.5 cm inward. I sew a hem on a sewing machine around the entire perimeter. At the end of the stitching, I leave a 1 cm hole for the safety pin.

4. String the elastic band on a pin, push it into the hole. I skip the elastic around the hem.

How to store a sheet with an elastic band

We looked at how to fold a sheet with an elastic band

But it is important to ensure the correct storage of products. Correct and compact storage will preserve the freshness, cleanliness and quality of linen for a long time, will allow you to neatly place things, rationally and economically use space in the closet

To keep the fabric smooth, stack the sheets and tie them with tape or string. Can also be folded set of linen in a pillowcase... Then you will quickly and easily find the items you need. At the same time, the neat kit looks aesthetically pleasing and does not take up much space in the closet.

Store and dry bed linen away from radiators and sunlight. Then it will not turn gray, yellow or fade, it will retain its brightness and original color for a long time. Things are placed on shelves in a cabinet with doors. Find tips on how to arrange things neatly and economically in your closet here.

To give sheets and other bedding items a fresh, light and pleasant aroma, to keep the products clean, put an empty bottle of perfume or a bag of dry grass in the closet between the sets. Don't choose a harsh, pronounced, or suffocating scent as it will interfere with a comfortable sleep. In addition, this aroma can cause an allergic reaction.

Shape selection

For sewing a 160x200 cm sheet, cotton or linen material is best suited. Linen is a fairly dense fabric that can withstand a large number of washes. It absorbs moisture well and allows air to pass through. Linen and cotton do not accumulate electrostatic charges, do not provoke skin irritation and allergies.

Coarse calico and satin are considered the best selling cotton fabrics.They are ideal for any time of the year and are considered wear-resistant and have a good thermal conductivity.

To make the right choice of size, the first step is to establish the exact size of the mattress. Any product of such a plan has a label, and it contains all the necessary information:

the first line speaks about the length of the product;
the second one confirms the width;
the third name is the height of the mattress.

The sheet can be oval or round to match the shape of the mattress. Rectangular shapes are most often for adults. The sizes of the sheets are as follows (in centimeters):

120x60;
60x120;
140x200;
90x200.

Euro products are most often of one color scheme, so making a choice does not present any difficulty - only in size. Knitted sheets are very good - they are flexible and soft. Retain their shape after many cycles of passing through the washing machine. Also, they do not need to be ironed, which is an advantage. Modern paints are stable, so things do not fade over time.

Choosing a material

High-quality sheets with an elastic band are always sewn from natural fabrics, mainly cotton. Only the structure of the material is different.

Satin

Silky, smooth, pleasing to the eye with a muted shine. Satin underwear resembles silk, but is much cheaper. Although, among other cotton fabrics, it is rightfully considered an elite material.

Advantages:

strength;
presentable appearance;
durability: satin sheets can easily withstand 300-400 washes.

There is only one minus of satin - the price of linen made from it is much higher than for sheets made of coarse calico or ranfors.

Batiste

Lightweight, airy, it is extremely rarely used for sewing stretch sheets. The exception is expensive gift sets for babies or newlyweds.

Advantages:

sophistication of linen;
beautiful, complex texture of the fabric.

At the same time, cambric is completely unsuitable for everyday use.

Jersey

Quality knitted sheets contain no more than 3% synthetic fibers. Thanks to this, their surface is never covered with pellets.

The advantages of cotton jersey are weight:

softness;
ease of care;
no need for ironing;
excellent stretch, thanks to which the sheet is easy to put on and forms a perfectly smooth surface.

There is only one drawback for knitted sheets: over time, the product may stretch slightly. To prevent this from happening, you need to wash the product at 300 C, and wring it out in the washing machine at low speeds.

Mahra

The winter version of bed sheets with an elastic band, which is very much appreciated by lovers of warmth and comfort.

Advantages of terry linen:

ease of care;
no need for ironing;
durability;
strength.

Terry sheets hardly wrinkle and never slip. Alas, after several washes, the terry will inevitably lose its original softness. And the owners of sensitive delicate skin will definitely notice it. A good fabric softener can partially solve the problem.

Calico and ranforce

The most common fabrics used by stretch sheet manufacturers. And it is no coincidence.

Material advantages:

maximum durability;
wear resistance;
smoothness;
excellent color fastness.

The only negative is crease. With coarse calico or ranforce sheets, the hostess will have to learn how to iron the linen with an elastic band.

Types of stretch sheets

No matter how simple the idea is, each manufacturer has added something of its own to the design of the bedding. As a result, several types of stretch sheets can be found on the market today:

With elastic around the entire perimeter of the product... The most convenient option: almost drum tension and firm fixation on the mattress. Minus one: to put on such a sheet, you need to get a handle on it.
With elastic band inserted only at the corners of the product... It is easier to put on this sheet, but the sides will remain unprotected.And if you have a nightmare at night, there is every chance of waking up from the fact that the bed is crumpled.
With elastic tape inserted at the corners with a short approach to the long sides... This option is used by manufacturers of luxury bedding made of fine fabrics: cambric, natural silk. If you insert a hard rubber band around the entire perimeter, there is a chance of tearing the product, just making the bed.

Rubberized sheets deserve special mention. Their front part is made of soft terry cloth, the back part is rubberized. Such products are suitable for cribs until the baby learns to confidently walk on the potty. Good waterproof models and in the care of bedridden patients. In this case, they can be used as a mattress topper, and a regular cotton sheet can be laid on top.