The survival rate of seedlings

How to get rid of stains?

Caring for leather products means taking care of things, their proper storage and cleaning. If traces and marks appear on clothes or accessories made of such natural material, then you can get rid of them in the following ways:

• Grease, oil, etc. stains can be removed with chalk powder. You need to fill up a dirty place with them, leave the product for a day. Then shake off the chalk, and clean the thing with a brush.
• Ballpoint pen marks can be removed with tape. You just need to stick it on the stain, press down well and pull sharply. Clean the remains with an eraser.
• Raindrops on leather items can be easily removed: they are brushed in different directions.
• If the product is heavily soiled, then it is better to have it dry cleaned.

other methods

Sea buckthorn can be propagated on the site by root shoots. This is one of the easiest ways. Such shoots appear on the tree 4-5 years after planting. To take offspring for transplant, they must be separated from the mother plant with a shovel. Plants are planted in the ground and kept in greenhouse conditions. They are watered, maintain a sufficiently high temperature and humidity. Before planting, sea buckthorn must be hardened. They ventilate it, weaning it off the greenhouse climate.

Further, having decided where to plant sea buckthorn, the shoot is planted in watered soil. By the fall, it will develop strong roots. During this period, you can transplant the plant to a permanent place of growth. However, this procedure is still recommended to be performed in the spring.

If the grower wishes to speed up the formation of offspring on the mother tree, he can prune the skeletal root. He is at some distance from the plant. The incision must remain open. Many offspring are formed here. By the second year, they have a developed root system. In the spring, they can be transplanted into a hole prepared in advance.

You can also graft cuttings to sea buckthorn. This process is most often done when a male tree has died. Cuttings of the opposite sex are grafted into the crown of a female plant. Literally in a year, the branches are developing well and will be able to pollinate the inflorescences. This method is also used with a limited area of ​​the site.

Pollination features

Cultivated in gardens, sea buckthorn is divided into female and male trees. This means that these plants are pollinated when the wind blows.

Therefore, it is important to have not one, but several trees at once on the site. It is also important to know at what distance to plant sea buckthorn.

The seedlings should be close to each other. The distance between them should be between 5 and 10 m.

Determination of the sex of seedlings can be done in spring, autumn or winter. During this period, there are no leaves on the branches. Female kidneys are much smaller. They are covered with 2 scales. Male kidneys are large. They have about 5-7 scales covering the developing inflorescence.

One male plant can have from 1 to 8 female trees

It is important to assess which side the wind blows mostly in the spring. A male plant must be planted on this side.

Female trees should be placed in a group on the site. They can surround the male sea buckthorn species. They can also be planted opposite.

Some gardeners claim that two male trees can be planted next to one female plant. This is due to the increased vulnerability of the latter to adverse weather conditions. Planting two plants increases the likelihood that at least one plant will survive. The female species are more hardy. Male trees can be very close to each other, literally at a distance of 1 m.

It is also important to consider what you can plant next to sea buckthorn. Female seedlings must be of good quality

Male trees can also be wild. However, to improve the quality of the harvest, it is recommended to plant next to the female type of sea buckthorn varieties Dear friend, Alei or Ural. They take root well in the climate near Moscow.

Purchased bath pond

Not all owners have cast-iron vessels "accidentally overwhelmed", but purchased items made of various materials can be a way out. Such models allow you to create original reservoirs with very extravagant shapes. However, before purchasing models, you need to get acquainted with the characteristics, some of the features of using these bases for a pond.

1. If the area of ​​the planned reservoir is less than 4 m2, then the best candidates will be plastic or fiberglass products.
2. Plastic bathtubs have the shortest warranty period, so it is better to look towards models made of a reinforced type of material.
3. Fiberglass baths with a rubber base are very reliable: they will serve the owners faithfully for about 30 years.
4. Fiberglass is maximally resistant to temperature extremes, besides, it is environmentally friendly. Such models have different colors and are quite attractive in appearance.

Installing a finished bath is almost the same as building a pond from a cast iron variety. Here, the pit is dug in the same way, however, the distance from its walls to the walls is only 40 mm. The bottom of the pit is covered with sand, its layer is also 40 mm. The container is placed in a pit, the horizontal is checked with a level, then filled with water, and tested again. If everything is in order, the voids between the pit and the product are covered with sand. The container is covered with a thick film, the edges are wrapped, then they are hidden under brick, stones or tiles.

To install a bath of impressive dimensions, it is recommended to call specialists, since a large area almost guarantees a meeting with various difficulties.

Rules of careful attitude to leather things

There are several ways to process animal skins. Hence, a large number of types of leather. For example, nubuck, suede, velor, patent leather or bags, gloves, belts, fur sheepskin coats - these are all leather products. Caring for leather goods is a must. There are general rules that you need to adhere to if you want the purchased product to serve for more than one year:

Dust gets on any item, so it is very important to clean the product from it. Leather accessories such as belts, bags can be wiped with a damp cloth

Leather outerwear can be knocked out or vacuumed.
It is impossible to store such things in plastic bags, because then the jacket or coat will smell unpleasant. You can cover leather items with a linen cloth or sack.
You don't need to be especially zealous with cleaning such products. After all, all leather things have a thin protective layer, which can wear off with frequent processing. If you go out for the first time in a new thing on the street, then it is advisable to treat a jacket, coat, shoes or other leather thing with a special impregnation. This will protect the product from dirt and moisture.
Do not use acetone, benzine, or other solvents to clean leather.
It is advisable not to wear leather products during a rainstorm. But if it starts raining suddenly, then when you come home, you need to wipe your wet clothes with a dry and soft piece of cloth. You cannot dry leather items on the battery.
Sometimes it is very useful to wipe such products with glycerin. This is especially true of collars and cuffs on jackets, jackets. This will give your outerwear a shine.

Woolen things

Wool belongs to the category of natural materials, so it will not be difficult to reduce it. So how do you wash woolen items to shrink? First, the products will need to be soaked for half an hour in a container with hot water and manually remove any dirt, if any.When washing wool, it should be borne in mind that the use of a typewriter and a violation of the temperature regime can reduce the thing to such an extent that only a child can wear it.

It is recommended to rinse wool clothes in cold and even icy water so that the fibers “settle down” under the influence of a sharp change in temperature. So that the thing does not lose its original appearance, it cannot be twisted. At the end of the wash, gently squeeze out excess water and lay the product on a flat surface until it is completely dry. To speed up this process, you can place it near a hot battery or on a heated towel rail. A towel must be placed under the item.

You will be wondering: What is a leotard? Features of weaving knitwear

It is necessary not only to know how to wash a knitted thing so that it shrinks, but also to remember the peculiarities of wool. If you hang the sweater on a string or hanger, it will be irretrievably damaged. The product will loose its shape and stretch.

Basic shrinkage methods

There are several ways to deliberately reduce the size. The choice should be made depending on the type of material and the desired result:

Using hot steam (iron).
Soaking and washing products in high temperature water, followed by hot drying.
Contrasting. First, the thing is kept and washed at a very high temperature, then it is sent to ice water and dried with hot steam.
Boiling.
Drying in a high degree or in the sun.

You will be interested in: Camel wool vest: nice and warm

Depending on what result needs to be achieved, people use this or that method. But, remember that it is impossible to predict the outcome with certainty. Therefore, in some cases, it is recommended to use a phased action. If the product has already undergone deliberate shrinkage, then this cannot be done again.

Additional tips and tricks

When altering a dress in the event that it turns out to be cramped, some rules are followed. The main condition is the ability to refrain from overloading the bow. Using multiple techniques at the same time can create a comic look. The best option is the thoughtful use of one technique in that part of the product where there is a problem with the wrong size.

Stylists' recommendations:

1. When using a colored or contrasting insert to increase the size in the chest, hips or waist area, the edges of the skirt or sleeves are decorated with the same fabric. This creates the illusion of a complete combination of two fabrics in one piece.
2. Before using the selected material, it is washed, ironed. The fabric may shrink or discolor after washing.
3. After covering the main seams, they are carefully and carefully ironed out to eliminate traces of the previous seam.
4. After the dress has been altered by sewing in inserts, it is washed by hand in order to exclude the possibility of re-shrinkage.
5. Some styles, after alteration, need to add decorative elements. An example of such decoration: the use of brooches, bows, epaulets.

&

> When reworking a new dress that does not fit in size, it is first washed in order to work with the washed item and to be sure that it does not give additional shrinkage.

Share link:

Place for a pond from a bath

To ensure minimal maintenance of an artificial reservoir, you need to pay attention to several conditions:

1. Illumination level. The best choice is a place where the sun's rays will replace the shadow. For example, the south side is ideal, where there are shrubs or trees nearby. The sun is necessary for the plants decorating the pond, the shade will prevent bacteria and algae from massively multiplying in the water. If the owners live according to Feng Shui, then the same favorable east joins the south.
2. Smooth relief.The lowland is the most important “pond contraindication”, since the accumulating precipitation and melt water will quickly make the artificial reservoir look inappropriate. The hills are also not ideal. In this case, there is another threat: the constant gusts of wind will negatively affect the vegetation surrounding the pond.
3. Close proximity to trees. In the fall, it will provide an opportunity to constantly engage in physical exercises, which will be required to catch fallen leaves from the water. Additional troubles are foliage rotting in the water, which means that its rapid turbidity is guaranteed or, worse, the appearance of an extremely unpleasant odor.

Proximity to home and / or recreation area is the last factor. Since a pond from a bathtub should become a "delight" for the eyes, its location near the windows of a building, near benches, swings, gazebos is more a rule than a recommendation.

Choosing a place for transfer

Having decided when it is better to plant sea buckthorn, you should consider the features of choosing a site for it. This should be a well-lit place. The tree is planted in the garden. It happens that he is given a place in the garden. This option is less preferable. The roots of the tree are shallow. Most of them are located at a level up to 40 cm underground.

The roots can grow far beyond the crown of the sea buckthorn. If vegetables are planted nearby in the garden, the tree can negatively affect their development. Also, the occurrence of roots close to the surface can lead to accidental damage to them when the owners decide to dig up the garden. The tree does not tolerate any root injuries.

Studying where it is better to plant sea buckthorn, you should give it a plot on the edge of the garden or vegetable garden. Here there is a minimal risk of damaging the roots of the shovel. And the tree itself will not interfere with the growth of other crops on the site.

It is better to choose a place in the garden for the sea buckthorn. Sea buckthorn feels good on light and fertile soils. Dislikes drought. The soil should be moist, but not waterlogged. Groundwater should not approach the surface closer than 1 m.

You should not plant plants where stone fruit trees grew recently. This will save the plant from diseases.

general characteristics

Studying the question of how to plant sea buckthorn, first of all, you need to familiarize yourself with the main features of this plant. It lives in nature on the shores of seas and rivers. Sea buckthorn belongs to the Lokhovy family. Both undersized and tall varieties are cultivated. Their leaves are gray-gray in color. They are thin and sharp. Flowering occurs before leaves appear. This process is not highly decorative. It may even seem that these are not flowers, but small leaves.

Most often, gardeners grow buckthorn buckthorn. It is widespread throughout the world. The willow sea buckthorn is also cultivated. In nature, this species grows in the mountains of Nepal, India and southern China.

Sea buckthorn is considered a frost-resistant tree. How to plant and grow a plant depends on the conditions of the climatic zone. If during the cold period there are sudden changes in temperature, the tree may freeze a little. This is especially noticeable on the rudiments of male inflorescences. Productivity is directly dependent on environmental conditions. Fruiting occurs in the 4th year of the tree's growth.

Sea buckthorn loves sunlight. If it is not enough, seedlings develop poorly. During the fruiting period, sunlight stimulates high yields. Berries have a sweet and sour taste. In garden species, the fruits are medium to large in size. They can be orange, reddish, or yellow-orange. Berries are eaten raw, preserved, added to various dishes. They are used for making cosmetics and medicines. Sea buckthorn oil is especially appreciated. It is prescribed in a complex for the treatment of various ailments. The fruits enrich the body with vitamins and minerals.

Photo of fabric flowers

We also recommend viewing:

• DIY artificial flowers
• Volumetric paper flowers
• DIY roman blinds
• Flower pots
• Wall painting
• Niche in the wall
• Combined wallpaper
• Feng Shui apartments
• Fresco on the wall
• DIY decoupage
• DIY candlesticks
• DIY lamp
• Wallpaper
• Gray interior
• Modular pictures
• Plates on the wall
• DIY pillows
• Apartment decor
• Crafts from matches
• Easter embroidery
• DIY photo album
• Filament curtains
• Glass blocks
• Decorative stickers
• Floor color
• Do-it-yourself pin cushion
• Home comfort
• Carpets in the interior
• Interior moldings
• Decor for the nursery
• Paintings for the interior
• How to decorate a room
• Ceiling design
• Wood in the interior
• Floor lamps
• DIY ribbon jewelry

User tip

To make it easier for people to figure out how to properly monitor things from various materials, manufacturers are developing a special hint. The basic rules for caring for products are indicated on the tag, label of any clothing, accessory. Anyone can see such a hint by looking at the seamy side of their favorite sweater, jeans, bag. Manufacturers mark the rules with special symbols - marking. Currently, these marks are established by the international standard ISO. These symbols are presented in the form of pictures and can mean the following:

• drying;
• washing;
• ironing;
• whitening;
• professional cleaning;
• prohibition of the ongoing operation;
• delicate treatment.

You can view the decoding of these signs in the figure below.

And there is a place for flowers!

There are many flowers in your house, the window sills are busy and there is no room for green residents on the floor. In order to compactly place the flora and not go out of the budget, the flower garden is settled on homemade whatnots.

Usually, inexperienced craftsmen do not know how to start and what to make a flower stand from. Imagination draws a structure made of wood or iron. This is a good option if you have extra money, because metal products, especially forged ones, are not cheaply valued.

But pots, flowerpots and stands are made from improvised means not only for apartments, but also for summer cottages.

For an apartment, men are able to make a modular structure from a metal pipe and plywood. They cut out pieces of wood of any shape, drill holes along the diameter of the tube, string on it and fix it with special fasteners.

If you are confused by possible difficulties, it is worth watching the video, and even there they will tell you in detail and show how to make a stand out of pieces of wood.

But for the balcony and the summer cottage, non-traditional materials are used. From plastic bottles, plastic pipes for sewers, old buckets, shoes, bicycles, chairs, car tires they create such works that you can only wonder.

At the dachas there is a lot of material, for example, logs that can be laid, hollowed out, covered with earth in a depression and flowers can be planted.

Boarding time

Some gardeners may have a question about when to plant sea buckthorn. In spring or autumn, this process is easier. However, the first days after the snow melts are considered the most correct period for planting. According to experienced gardeners, plants planted in the ground in spring take root better. In the autumn period, the root system does not have time to prepare for future cold weather. Thaws and sharp frosts have a particularly negative effect on it. During this period, the tree begins to wake up from hibernation. With a sharp cold snap, it can freeze.

It is especially not recommended to plant in autumn plants not bred in this climatic zone. Otherwise, the sea buckthorn will be ready to wake up in January. The onset of frost can negatively affect its development.

Sea buckthorn seedlings may have an open root system when they are sold. When to plant such plants, the opinions of gardeners agree. They recommend doing this process as early as possible.In the first days of spring, sea buckthorn is required to be planted on the site.

The tree does not like transplants. If even an insignificant part of its roots is damaged, growth and development noticeably slow down. Therefore, early transplantation is indicated for young seedlings.

If sea buckthorn has been grown for more than a year in a container, you can plant it in open ground even in summer. In this case, the plant will easily endure the adaptation period. However, sea buckthorn, which grows in a tub for less than a year, is not recommended to be planted in open ground. In this case, it has not yet hardened its root system and may die.

Bath pond: evaluating an idea

This method of original use of things that have served their time is no longer a curiosity, since its main advantage is practicality. If there is a desire to build a small pond, then the work promises to be difficult, rather laborious and time-consuming. To facilitate it, an old cast-iron bath is taken as the basis of the reservoir.

This task "with one known" is immediately simplified as much as possible: to create such a reservoir is within the power of every owner who has a set of elementary tools on the farm. The "bath pond" operation will not steal much time, and maintenance of the structure promises to be quite simple. The shores of such a mini-lake are decorated with stones, ornamental plants, and lighting. Some go further - they launch fish there.

The area of ​​the bath is approximately 2 m2, such a surface can be considered almost ideal: both for the local area of ​​suburban ownership, and for the suburban area, where the footage often does not allow you to walk around properly. The sturdy walls of the bathing vessel ensure that the water will not one day disappear from the pond "in an unknown direction."

Another plus is the hole designed to drain the water. It will greatly simplify the task if the owners decide on any improvements in the future. Saving on materials is another point in the "piggy bank" of the old bathtub: similar store products for the arrangement of reservoirs are not too cheap.

There are many pluses, but only two minuses: this is the considerable weight of the cast-iron vessel, the impossibility of expanding the reservoir in the future. The first drawback is the most serious: in this case, the help of an assistant will be required during the construction of the pond. In the category of disadvantages, the appearance of ubiquitous mosquitoes near the water can be written down, but they will bother people even without a pond on the site.

How to choose a seedling?

Only zoned, that is, adapted selectively for a given area, and not imported from south to north, or from the center to the south of the country. In this regard, we give expert advice for planting.

Saplings are of two types - grafted or grown vegetatively (from cuttings or seeds). Grafted trees are more powerful for breeding purposes. They are distinguished by the remainder of the rootstock before the stem of the seedling leaves it. They develop and bear fruit better, are complex and resistant to diseases and pests.

Choose seedlings according to the root system. Better fibrous, it is like a cap, and not a pair of roots in the little finger thick with liquid hairs.

Have you noticed the necessary seedlings? Buy immediately. After a week and even after a month, they will also stand on the growing heat, and the roots will quickly lose turgor. At best, vendors spray the roots with water. Often, every second such seedling does not take root.

Recommendations for correct operation

The created small reservoir will become a decoration of the site, but, despite its tiny size, it still requires good care.

1. Periodic top-up of water is mandatory due to evaporation. In this case, it is better to overflow, since the excess liquid will still be absorbed into the soil.
2. There is no need to constantly change the water in it. Such an operation is necessary if there is a need to clean it from various sediments, when “persona non grata” - aggressive plant species, crawling “crooks” who decided to stay, have appeared in the pond.
3. To prevent the water in the pond from acquiring an unpleasant odor, 2 buckets of water taken from a natural reservoir are poured into the bath.The microorganisms in it feed on algae, which are the cause of this unpleasant phenomenon - flowering.
4. Snails in a pond with plants and fish are unwanted guests. A highly expanded family will become a great threat to vegetation, and hence to the diet of underwater inhabitants. They can even spoil (eat) the artificial surface of the reservoir.
5. A real aquarium from such a pond will not work, because it is impossible to keep the water crystal clear in it, it will become cloudy after a few days. For this reason, very gentle creatures, accustomed to ideal conditions, simply will not survive there.

Artificial pond in winter

Before the onset of winter, the water from the pond is usually drained, the "living creatures" and plants are removed for wintering in the warmth. The walls of the reservoir are thoroughly cleaned and washed. The dry bath is covered with a sheet of iron, tarpaulin or roofing felt. The latter materials are fixed with stones or bricks. However, draining the water is an operation that is not considered mandatory.

In order to prevent the destruction of the walls of the cast-iron bath with water, a thick layer of snow must always remain on the surface of the ice. It will keep the water from freezing. Another way to secure the vessel is to place a half-empty plastic container in the water. It is half filled with sand. These bottles will serve as a kind of improvised damper if the water suddenly begins to freeze.

Making a cute bath pond is pretty easy. Its construction does not require expensive materials or special tools, and work with a cast-iron container and a great desire to "create something like that" can be done in a few days. If you have any questions, then perhaps they will be answered in this video:

Transplanting an adult plant

Having considered where to plant sea buckthorn on the site, it is necessary to study the subtleties of this process. This plant is not cultivated by seeds. With this method of reproduction, varietal characteristics are lost. In this case, the fruits will not be so tasty, their collection will be difficult.

The transplant is carried out for cuttings or plants with root shoots. In the first version, the procedure can be carried out even in the fall. To transplant a tree with root shoots, you will have to show maximum patience and endurance.

With such a transplant, it is extremely important not to harm the growth.

Sea buckthorn roots can be several meters long. Therefore, digging them up for transplantation, it will not work at all not to damage the plant. To prevent the plant from wilting, when replanting the root system, aerial branches must also be partially pruned. In the current year, this will reduce the ability to bear fruit and develop rapidly. However, this method will save the strength of the plant.

To understand how to plant sea buckthorn in spring, you need to consider the recommendations that apply to almost all fruit plants. The diameter of the hole should be 50 cm, and the depth should be 40 cm. The root collar should be at the level of the ground shrinkage. It is not recommended to apply too much fertilizer. A bucket of compost and superphosphate is enough.

If the soil on the site has a high acidity, it must be calcified. For this, 500 g of slaked lime is used per 1 m² of area. For heavy loamy soils, increase air permeability. For this, the topsoil is mixed with humus and river sand in equal proportions. You can add 40 g of potassium salt and 250 g of superphosphate. After transplanting, the soil must be watered and mulched with a dry layer of earth.

What to do with knitwear

Hand-knitted items require delicate care. If the knitting has stretched over time, you can fix this problem.

Temperature difference

In order for the knitted thing to return to its previous size, it is necessary to soak the product in boiling water for 10 minutes. After that, the knitted product is placed in a cold one and left for 10 minutes, after which it is rinsed in warm water.This will reduce the density of the fibers.

Steam iron

By using an iron, you can shrink the woolen garment by one size. To do this, the product is laid out on an ironing board, sprinkled with water and, using steam, is carefully ironed.

How to reduce width, not length

Very often knitted items are stretched in width. In order to fix this problem, you must perform the following procedure:

• after washing, spread the wet product on a towel to dry;
• use pins to give the product the required width and pin it to the towel;
• correct the width every 30 minutes, the procedure is carried out until the product is completely dry.

Using this method will correct the width of the product by one size.

Correcting individual stretched sections

A very common problem that wearers of woolen products may encounter are stretched parts such as elbows or knees. To eliminate such a problem, you must:

• spread the product on an ironing board;
• pour water into the sprayer and spray the desired area;
• iron with an iron until dry.

The same result can be achieved using an iron with steam functions.

How to repair stretched sleeves

In order to correct the stretched sleeves on the sweater, you must perform the following procedure. In order to return the shape to the sleeves, you must:

• boil water in a basin;
• lower the sleeves in turn into boiling water for 5 minutes;
• spread the sweater on a towel and leave to cool completely.

The effect of this procedure lasts for several weeks, after which the procedure must be repeated.

If the product is combined from different materials

If the product that has been stretched consists of a different type of fabric, the components must be evaluated. If it is necessary to change the size, a technique is used during which the thing is soaked in hot water and left for a while. If individual parts are needed during the restoration process, only part of the product is soaked in hot water so as not to harm other fibers.

Using simple techniques will allow you to quickly return your favorite things to the required shape. Exposure to hot water on some types of fabric allows you to quickly return to the desired shape without harming the fabric fibers. However, before carrying out this procedure, it is necessary to study the marks on the tags.

Share link:

Trash - in business!

Consider a small fraction of handicrafts, from which you can make stands for stationery, flower pots, telephones and other household items.

First of all, needlewomen use unnecessary paper, cardboard, newspapers, postcards, glossy magazines.

Glass jars with small chips and cracks are carefully sanded and covered with acrylic paint. Use cans and cans. They are wrapped in multi-colored yarn, thick rope, pasted over with beads, felt, sequins, and trimmed with buttons.

Those who are friends with wood tools will love the two-in-one stand. Two parts in the form of an elephant are cut out of wood, a box or glass is glued between them. The curved trunk will serve as a stand for the gadget, and the container will be used for pencils and pens.

Young ladies do not like to bother with a jigsaw and a soldering iron, they like to embroider, knit, sculpt and glue. Therefore, they know how to make the coasters themselves in the form of cases, crocheted and knitted, in the form of animals and flowers. From baked clay or plastic, they mold a kind of coasters that can be painted with acrylics.

Let's put things in order

Pencils, stationery, papers are scattered on the table, the phone and the charger are barely in the pile. And in the corner a keyboard is modestly nestled ... Does this sound familiar? A student or a schoolboy has no time and no need to clean his workplace. After all, in a day it will be the same.

Organizers will help to create order.You don't have to buy them from office supplies. To save budget and develop imagination, they are easy to make from available tools.

We suggest considering options for how to make a do-it-yourself stand for pencils and pens, paper clips and other trifles, and an organizer for the necessary papers.

Old cardboard boxes are cut in the shape of a square with a truncated corner for easy removal of papers. Pasted over with colored paper or napkins using decoupage technique. The “newspaper theme” is in trend now, when the made little things are pasted over with clippings from old newspapers.

For small office supplies, a multistage craft made of cardboard tubes is suitable. They are left over from paper towels and toilet paper rolls.

Cut the tubes to varying lengths. Glue their side surfaces, creating a structure of 4-5 pieces, and decorate at your discretion.

Any coating is suitable: gouache, watercolor, acrylic paints. Paste newspaper clippings, postcards. Decorate with beads, cords.

If you take double-sided colored paper and practice using the origami technique, you get a beautiful multicolor organizer with faceted corners.