How to iron a veil at home with your own hands: features, rules for washing and drying

How to steam properly

Sometimes, wanting to tidy up the dress after washing, it is necessary to carry out the steaming procedure. With its help, you can smooth out fabric layers, as well as give the original look to frills, ruffles and bows. You can cope with this task using various methods:

holding the dress over the steam;
ironing the wedding dress with an iron;
using professional steamers.

With boiling water

To create the required amount of steam at home, you will need a pot of boiling water.

Pour water into a large saucepan and put it on fire.
As soon as the water boils and steam begins to appear, one person should hold the dress in a canopy, directly above the boiling pan, and the second, meanwhile, monitor the direction of the steam, substituting problem areas of the outfit under it.

Steam from boiling water will help smooth the wedding dress

The second method is as follows:

Hang the dress on a hanger and hang it over the bathroom.
Pour boiling water into the bath, making sure that the hem of the wedding dress is above the hot water at a height of at least 20-25 cm.

Under the influence of humid air, the material will begin to straighten, however, the decor glued to the dress may suffer.

With an iron

When using an iron to steam a wedding dress, make sure you have gauze or special fabrics designed for ironing delicate fabrics. It is possible that in order to successfully complete all actions, you will need an assistant who will support the wedding dress.
Cover your ironing board with a clean sheet.
Set the temperature to one.
Turn on the steam, at the same time setting the delicate mode.
Fold the gauze in 2-3 layers and spread it over the wedding dress.
Run lightly over it with an iron. If these actions do not provide the desired result, increase the temperature to two degrees.

Using an iron can effectively steam a wedding dress

For high-quality smoothing of the sleeves, it is advisable to use a special stand, which is present in the standard equipment of the ironing board.
When ironing and steaming a skirt, you should start the procedure from the lower layers, gradually moving to the upper ones.
When working with a bodice equipped with decorative elements, place a terry towel on the ironing board.

How to process a wedding dress with a professional steamer

If you have steam at your disposal, the procedure for smoothing out the wrinkles and bruises formed on the wedding dress will be solved as quickly as possible. Thanks to the work of the steam generator, it will be possible to steam off the wedding dress without touching it with the device itself.

Before starting work, pour the required amount of water into the device, according to the manufacturer's recommendations, and then turn it on.
Hang the product on a hanger, and start the steaming procedure, processing first of all the skirt, flounces, and then move on to the sleeves and bodice.
After completing the work, let the dress hang for a few hours, and only then send the outfit to the closet.

The steamer will most quickly and effectively help to restore the original look to the wedding dress.

How to iron without an iron

If there is still enough time before the wedding (2-3 weeks), then the veil can simply be lightly sprinkled with water and hung in the closet so that the fabric has time to straighten out naturally. This will minimize the need for further processing and the risk of damage. If there are only a few days left, more drastic measures are needed.But do not try to quickly fix the problem with the help of intensive ironing - delicate materials cannot stand this, and, most likely, the bride's main accessory will simply be ruined almost on the eve of the wedding.

Steamer

Sometimes the veil is richly decorated or has many assemblies, which excludes the possibility of ordinary ironing. In this case, this thing can be put in order using vertical steaming: to do this, hang it on a hanger and walk along the entire length with a steamer (or an iron in the appropriate mode) at a short distance. This method is considered the most gentle and safe for delicate tulle products.

In the bathroom

You can also use the well-known "home" method of steaming without special appliances. The veil should be hung over a bathtub filled with hot water. It will be enough to hold it over the steam for 15-20 minutes so that all the creases on the fabric straighten.

Hairdryer

There is another way to quickly smooth out bruises. It consists in using a spray bottle with water and an ordinary hair dryer with an average drying temperature. First, sprinkle all the irregularities with water, and then dry them with a hairdryer in a vertical downward direction. This method is a home analogue of steaming.

With a jet of steam

Sometimes only a couple of small but noticeable folds form on the veil. In this case, it makes no sense to subject the entire product to processing. You can simply try to flatten the area by holding it flat over a kettle or pot of boiling water.

How to pet a veil

One of the traditional elements of a wedding dress is a veil, which also requires some maintenance, including ironing. If the jams are too severe, you can use a professional steamer when ironing the veil.

You can return the veil to its original appearance using the ironing and steaming procedure.

Using a steamer

Hang the veil on a hanger and steamer along its entire length, starting from top to bottom. It is also possible to use an iron held at a short distance from the material. This method is effective when working with tulle, and is the safest.

The steamer will gently smooth out the veil

With hot water

You can also steam the veil using hot water. This method is similar to the method of steaming the wedding dress itself: Pour boiling water into the bathtub, after hanging the veil over it, and hold it over the steam for 20 minutes.

Steam rising from the surface of the boiling water will smooth the veil

With a hairdryer

An ordinary hair dryer will help to quickly get rid of bruises:

Set the appliance to a medium drying temperature.
Use a spray bottle filled with water to treat uneven surfaces of the product.
Dry the wet material with a hair dryer.

Use a hair dryer to smooth out wrinkled veils

With a directed jet of steam

If there are a few wrinkles in the veil, you can use a directed stream of steam from a kettle of boiling water. Bring the crumpled piece of material close to a source of steam, and it instantly smoothes out under the influence of humid air.

A targeted jet of steam will effectively smooth out wrinkled veils

Iron

In some cases, ironing may be necessary, however, some guidelines should be followed.

The veil should be laid out on a clean ironing board.
The iron must be set to the minimum temperature, or the "synthetic" mode.
On top of the veil, put ironing cloth or gauze rolled into 3 layers.
When ironing the product, make sure that the base material does not come into contact with the hot sole of the appliance.
If the veil is decorated with artificial flowers, sequins or beads, these areas should be covered with a terry towel.

The veil can be gently ironed

In some cases, you can smooth the veil by soaking it in water with a softener and drying it hanging and stretched out.

Video: How to iron a veil

With the help of these simple methods and means, you will be able to return the wedding dress to its original appearance, safely removing it from various types of pollution. When caring for a wedding dress, it is necessary to take into account the peculiarities of the materials used in its sewing, as well as evaluate the types of pollution, each of which requires an individual approach.

Alternative to the iron

Ironing a large thing with a complex cut, with many folds-assemblies, for example, a wedding dress, using an iron may seem not only tedious, but also risky - especially if the hostess had no experience with such delicate matter before. Therefore, you can resort to another method - more gentle to both the nerves and the dress itself. The algorithm of actions is quite simple.

Fill the tub with hot water.
Wait for steam to fill the bathroom.
Hang a dress there, straighten it on a hanger, make sure that the thing hangs securely and does not fall into hot water.
Leave the dress like this for 2-3 hours.

During this time, the steam will smooth the product no worse than a steamer, while the decorative details will not be damaged, and the owner of the outfit will be relieved of the need to kill a lot of time for ironing, which can be used for more important chores.

Actually, in this way, you can successfully iron a tulle skirt, veil and any other things. The convenience of this method also lies in the fact that there is no dependence on the presence of current in the network. It's no secret that a power outage happens at the most inopportune moment. Yes, and irons fail sometimes "according to the law of meanness." In the bathroom, you can put a thing in order in advance, regardless of these two factors. Even if the hot water is turned off, which also sometimes happens "at the wrong time", you can heat several pots of cold water on the stove. Small things can be ironed in another way. It will be even more expedient, because you don't have to take a whole bath of hot water for the sake of a bow or a children's skirt. All you need is a hair dryer and a spray bottle of clean water

It is important to make sure that the water is perfectly clean, otherwise it can leave ugly marks on the tulle and the thing will have to be washed.

Before the procedure, you need to straighten the product, if it is a veil or a skirt, hang it on a hanger. Further, the wrinkled places are sprayed with water from a sprayer and treated with a hairdryer, turned on at medium or low power, so as not to damage the delicate fabric. This creates an effect similar to that of a steam generator. Hot air will evaporate moisture, leveling the tulle surface. So you need to go through all the bumps and creases until they disappear.

There are times when a thing looks perfectly ironed, but it has minor small creases in a small area - it has crumpled a little, for example, among other things in the closet. In such a situation, getting an ironing board, towels, ironing devices and unfolding things seems at least impractical. And there is no point in filling the bathtub for the sake of two or three folds. Then you can resort to another trick.

Boil water in a kettle.
If there is a whistle on the spout, remove it.
Hold the flattened spot over the steam from the spout until it smoothes out.
Spread out and hang the item to dry.

So, tulle products are very thin and delicate. Their delicate texture can be easily damaged with one awkward iron stroke. But now, when there is a baggage of knowledge about how to iron such things correctly and safely, you can be sure that the celebration will not be spoiled by a crumpled or burnt dress, skirt or veil.

How to iron a veil at home

How to iron a veil at home with your own hands, how to wash and dry how to iron a veil at home
How to iron a veil without damaging the material

How to iron a veil without an iron
If the tag permits, you can wash the veil in the washing machine. To do this, choose a delicate mode with a temperature of up to 40 degrees without spinning. Rinse with your hands. After washing and rinsing, do not wring out the veil, but immediately hang it on a rope in the bathroom using clothespins. When the water is drained, shake off the clothes and straighten the folds.

How to iron a veil at home
Mission - Smooth the wedding dress: iron, steamer and grandma's techniques

Before starting ironing, it is worth checking the selected temperature in a safe area of the dress (for example, below, behind).
A satin dress should not be ironed, you risk leaving stains. For tulle and other synthetic fabrics, prepare gauze or thin cotton fabric to serve as a lining.
Different elements of the dress are ironed at different temperatures.

How to steam a veil at home

Using steam when ironing a veil takes much less time and takes a minimum of physical strength. And the folds on the product are smoothed out much better.

This method is recommended when the veil is decorated with additional decor. It will be very difficult to iron such a thing, if not completely dangerous, but the steam generator will cope with the task perfectly.

Step-by-step steaming of the veil looks like this:

Hang the veil in an upright position so that it falls along its entire length;
turn on the device and wait for it to heat up;
As soon as the technique starts to dispense steam, smoothly process the entire veil from top to bottom, paying particular attention to especially crumpled areas.

Take your time and try to work very carefully

Speed is not at all a guarantee of success, but respect and caution will bring a much more positive result.

How to dry properly

A tie sometimes loses its shape, not only due to violations of the washing rules, but also due to improper drying. There are 2 drying methods:

Hang the edge of the product on a clothesline, press with a clothespin. You cannot twist and squeeze it. The water should drain off on its own. You can dry both indoors and outdoors in the shade. The tie is straightened, giving it its original shape.
Take a clean terry towel. Put a tie on one side, and cover the other on top. It is easy to press on the product, as if squeezing out water. To dry completely, the wardrobe item is transferred to a dry towel. Give the correct shape, leave for several hours.

If the accessory lies on a horizontal surface, then it is necessary to smooth out all the folds very well.

Can a wedding dress be washed at home?

A dirty wedding dress can upset a young spouse with its appearance, but you should not despair. Wanting to solve the problem as quickly and without hassle as possible, some women prefer to take wedding dresses to dry cleaners, but the results of the work of such companies are far from always able to satisfy customers.

A stained wedding dress can be washed at home

Harsh detergents and powders used to treat garments under dry cleaning conditions can sometimes seriously damage the structure of a particular type of fabric. After such processing, a luxurious wedding dress can become irretrievably ruined, turning into a Cinderella outfit.

After being dry-cleaned, the wedding dress may lose its original appearance.

In order to avoid such a situation, it is advisable to wash the wedding dress yourself, using an individual approach to various types of dirt. This will help to achieve the maximum effect, and will also guarantee the safety of your item. Provided the washing procedure is carried out correctly.On branded products, you can easily find a label containing information about the type of fabric used in the manufacture of the outfit, as well as the manufacturer's recommendations regarding the washing and ironing of the product.

Initially, it is necessary to inspect the dress for dirt, paying special attention to the hem, where traces of road dust often remain, as well as to the places located under the arms, which form yellowish sweat stains. Do not forget about the inner part of the bodice, which will also need to remove dirt.

When preparing a wedding dress for washing, the type of material from which it is made is of particular importance. In most cases, in the manufacture of this kind of outfit, synthetic fabrics are used, which involve hand washing.

A branded wedding dress must have a label with recommendations for caring for it

Since a variety of decorative elements in the form of beads, rhinestones and beads are used as decorations for wedding dresses, you should be very careful with them during washing. In some cases, glue is used as their fasteners, due to the presence of which the rhinestones can easily fly off. If this happens during the wash, do not despair too much. Floral patterns can be restored manually using threads or specialized adhesives.

Richly decorated bodice of a wedding dress

How to wash a dress at home

If cleaning does not remove the dirt, go to wash. This method is also recommended for removing water-based stains: sweat, traces of food.

How to hand wash a wedding dress

A gentle hand wash is preferable, especially if the dress is richly decorated. If it is separate, wash the skirt separately.

Dilute detergent or soap in water at 20–30 ° C.
Place the skirt in the liquid and let it sit for 2 hours.
Gently rub the dirty areas with a sponge.
Rinse the product thoroughly in cool water, adding a few drops of vinegar.
Dry your skirt.

The skirt or hem can be hand washed without soaking the whole dress

Washing a wedding dress in the bath

A fluffy dress decorated with sewn-on decor is best washed in the bath.

Fill the bath with warm water, 30 ° C.
Add detergent, soak dress in liquid for 60 minutes.
Clean the fabric with sewn decorative elements by gently rubbing the dirt with your hands or with a very soft toothbrush.
Rinse the dress until all traces of powder are removed, usually 2-3 times is sufficient.

Washing a wedding dress by weight

Wash the lace airy dress by hanging it over the bathroom.

Moisten the dress with warm water, after hanging it on a hanger above the bathroom.
Wipe the dirt on the dress with a sponge dipped in soapy water.
Pour water over the dress from top to bottom, rinsing off the soap.
Leave the dress hanging until the water drains.

Washing machine

Automatic washing will restore freshness to the dress.

machine wash only dense fabrics with a minimum of decor;
do not machine wash the corset, as it deforms;
wash gauze or white cloth on the decor before work;
to avoid deformation and puffs, wash the outfit in a special bag;
soak the dress only in warm water;
instead of powder, use a liquid colorless product to avoid streaks on the dress;
to keep the product looking like new, add starch to the conditioner compartment;
choose a delicate wash without spinning, at a temperature not exceeding 60 ° C.

Wash a wedding dress in an automatic machine in a delicate mode without spinning

How to iron a tulle veil

It is necessary to iron any veil in a special way, since the finest delicate fabrics are always used for their sewing (most often tulle, lace, silk and tulle).The latter is the lightest translucent mesh material with a sufficiently rigid structure that allows it to keep its shape well. However, if folds appear on it, then it is not so easy to eliminate them. It is worth remembering that tulle is very vulnerable to high temperatures, and you can easily burn it with an iron.

It is possible that a light pre-wash is required before ironing. Before you iron the tulle, it will be useful to soak it for a while in water with a fabric softener and wash it gently with your hands. Then the product must be dried in an upright, straightened position. Perhaps, after such a procedure, ironing is not required at all.

If ironing is necessary, then first you need to make sure that its surface is perfectly clean and will not stick. Then you need to set the minimum temperature or synthetic mode. It is also recommended to prepare in advance:

ironing cloth (gauze or white cotton is suitable);
sheets of thick paper;
towel.

The ironing cloth or paper must be placed on top so that the material does not come into contact with the surface of the iron. You will need a towel to cover the areas with decorative details and thus protect them from temperature (the veil is often decorated with sequins or small artificial flowers, which can simply melt from the touch of the iron).

Ironing in the salon

Sometimes a thing seems too vulnerable to domestic manipulation. You can always ask for help at the bridal salon where it was purchased. They not only know how to iron a veil and a wedding dress, but they will most likely do it for free. As a result, all the details of the wedding dress will be pre-set in perfect condition.

Salons never use an iron to iron wedding dresses. Most often, dresses, suits and other accessories are put in order with the help of high-quality steamers. Therefore, ironing in the salon is the safest option.

How to iron tulle

Many brides, when ironing their wedding dress, will certainly face the question of how to iron a veil and whether it can be done with an iron.

Firstly, such a synthetic mesh material may be present not only in the bride's veil. It is often used to add puffiness and volume as a petticoat, sleeves and as various decorations in the form of bows, flowers, and so on.

IMPORTANT! Tulle is a very thin synthetic material that has a certain mesh weave. At high temperatures, it melts instantly

If you are using an iron, use the lowest heating temperature. Iron only through half-folded gauze; it is much easier to iron tulle with a steam generator. To do this, the product is hung in an upright position and passed over it at a certain distance from top to bottom until the fabric acquires the necessary neat shape.

As mentioned above, in many cases, not only a steam generator or an ordinary iron, but even a simple bathtub may not be at hand. In this case, some experienced housewives use an ordinary wide container of hot water. It is necessary to keep the tulle stretched over the hot steam until it unfolds.

IMPORTANT! Make sure that the material itself does not touch the edges of the hot cookware, otherwise it will melt easily. In our article, we talked about only some of the ways how it is possible to put your wedding dress in proper shape at home.

If for one reason or another you cannot use them, perhaps you simply do not trust yourself, then you should contact any wedding salon or other specialists who will help you cope with the preparation of a dress for a wedding celebration. The main thing is that you are calm and confident that everything will go according to your best scenario. As a last resort, you can always use our advice

In our article, we talked about just some of the ways how it is possible to put your wedding dress in proper shape at home. If for one reason or another you cannot use them, perhaps you simply do not trust yourself, then you should contact any wedding salon or other specialists who will help you cope with the preparation of a dress for a wedding celebration. The main thing is that you are calm and confident that everything will go according to your best scenario. As a last resort, you can always use our advice.

Iron or steam generator?

If it is possible to use a steamer at home, then, undoubtedly, it should be preferred. It will easily cope with all creases, even on voluminous curtains, and not just on a wedding veil or a fluffy skirt. Delicate steam will not spoil the delicate structure of the fabric, while it will easily return the ironed look to the product.

But if there is no steam generator, you will have to suffer with the iron. That's right - for a long time, systematically, patiently, carefully. A large item like a wedding dress will take at least an hour of time and patience.

The iron must be set to the minimum temperature, do not pour water into the special compartment.
Place a soft towel on the ironing board.
A dense fabric is placed on top of the tulle, which will help avoid contact of the delicate mesh with the sole of the iron.
The ironing of the dress begins in the front, with large details, such as the bodice and skirt, gradually moving to smaller ones - sleeves, collar, ruffles.
It is more prudent to start with the bodice, since a full skirt with many folds is much more difficult to iron, but much easier to wrinkle if the top is ironed after it.
If the top of the dress is decorated with beads, rhinestones or embroidery, put a soft towel on top for protection.
To iron the sleeves, you will need a special stand, which is included with each ironing board.
Having ironed the sleeves, you need to insert tubes of thick paper into them to maintain their shape.
It is important to constantly look at the ironed-out areas - if you have missed small bruises or folds that can ruin the whole festive mood, and if necessary, iron out the noticed flaws again.
Hang the ironed product on a hanger.

Before ironing tulle garments, make sure that the soleplate is perfectly clean and smooth, without roughness. Otherwise, you can not only stain the fabric, but also damage its delicate texture.

It will be much easier to iron a skirt or veil, since their shape and size will not create unnecessary difficulties in work.

What to do after stroking the veil

Knowing how to iron a tulle veil is not enough.

It is very important to decide on its further storage. After all, if you fold it and put it in the closet, then at the time of the celebration the product will again take on an unpleasant look.

Proven storage methods:

Very often, salons, along with a wedding set, sell a cover for a dress. And so that the veil is not lost and remains in good shape, it can be pinned inside this very cover.
Special case. If the product is too large or has decorative elements in the form of lace, rhinestones or other stones, then in order to avoid damage to the dress itself, they should be stored separately from each other.
Homemade pouch. You can also make a cover for storing a veil at home. For this, a piece of dense fabric of necessarily light color is suitable, so as not to paint the decoration in any way. In a more simplified version, it is allowed to use plastic bags that can be used to cover the product.

Whichever storage method is chosen, you should always remember an important condition that after ironing the veil must be allowed to dry. To do this, just let it hang in the house and not cover it.

If you remove a wet product, then it will quickly wrinkle.

The dried decoration can be safely packed in a prepared case and hidden in a closet.

At the same time, it is important that it was stored exclusively in an upright position and other things did not put pressure on it.

Following these simple guidelines will save the family budget and amaze all guests at the wedding with a luxurious appearance.

How to iron tulle from different materials

Before you iron the tulle, you need to clean the sole of the iron. Marks and dirt must be removed so as not to spoil the delicate material. Before ironing, be sure to read the label to take into account the recommendations and properties of the fabric.

In this example (polyester). Ironing allowed at temperatures up to 100 - 110 ° C

Organza

Since the fabric is woven from very fine fibers, it must be handled with extreme care. There are several ways to gently iron organza tulle:

Steam treatment. The easiest and fastest way is to use the steam generator or the steam function on the iron. It is necessary to hang the tulle on the cornice, and then walk around the entire cut 1-2 times.
Iron with an iron. The heating mode is selected depending on the composition of the organza. Iron the semi-damp curtains from the seamy side through cheesecloth.
Hanging on the curtain rod immediately after washing. If the fabric is not straightened, then the folds and creases should be moistened with water from a spray bottle, straightened with your hands and left to dry.

Nylon

The fabric is made from oil-derived polyamide fibers. Ironing nylon tulle is not recommended, as the material melts easily.

If a process is necessary, it is important to do it right:

The nylon should be smoothed, barely touching, or better - through a thin cotton fabric.
Avoid smoothing movements to avoid stretching the fabric. The iron must be rearranged from place to place.
Capron should not be moistened during ironing or processed with a steam generator, as the fabric will stretch and become covered with waves.

Linen and cotton

Natural fabrics are easily wrinkled, therefore, even during washing, you need to take care that the material does not deform. To do this, you need to use the delicate mode and turn off the spin. As a last resort, use the lowest speed.

It is best to hang the cotton tulle so that the glass is water, and then attach it to the cornice and carefully straighten it. When the canvas is dry (it takes about 1 day), it will look freshly ironed.

If you cannot do without an iron, then you need to iron the cotton tulle at 90-120 ° C from the wrong side. For severe bruises, iron through a damp cloth.

Linen tulle is ironed at high temperatures, after underdrying or moistening. As with cotton fabrics, they can be hung wet for a natural stretch.

Veil

The delicate gauze-like fabric can be made from silk, cotton and even wool. But today, synthetic material is more often used for curtains. It is recommended to iron it only after washing, since any spot invisible to the human eye will be strongly fixed under the iron.

To less injure delicate fabrics, do not twist and wring out during washing. As soon as the water drains, the tulle must be hung on the cornice, gently straightened and left to dry.

If you need to iron, it can be done with a steam generator or an iron heated to a temperature not exceeding 110 ° C. To prevent the fabric from stretching, it must be ironed through a thin cotton fabric, moving the appliance from place to place and avoiding back and forth movements.

Polyester

The fabric is extremely capricious to care for, so even a delicate wash does not always save you from bruises. In addition, synthetics do not have the property of self-leveling, so hanging in a wet state will do nothing. Curtains are recommended to be ironed under-dried or moistened from the inside out through cheesecloth.

Viscose

Artificial material, the raw material for which is wood. It is better to steam the viscose by hanging it on the cornice. If vertical processing is not possible, then iron the tulle on the board at 120 ° C.Do not spray from a spray bottle, as traces of water will appear on the canvas, and the material itself will become wavy.