Do you need to iron the curtains and how to do it right

How to steam curtains at home: tips, tricks for housewives

How to iron curtains at home without ruining them? If you have not encountered ironing of any particular type of curtains, just look at the label: there will be minimal instructions for washing and ironing these curtains. In the case of individual ordering of curtains in a special studio, check with the seller in advance which fabric the curtains are made of. Based on the information received, you should select the desired ironing / steaming mode on your iron.

The ironing temperature and other recommendations for the care of the curtain can be found on the tag

Help - decoding the main symbols found on fabric labels

If you doubt the composition of the fabric from which the curtains are made, and there is nowhere to find out, check the temperature you need experimentally. To do this, find an inconspicuous piece of the curtain (for example, at the bottom of the fold) and, setting the iron to the minimum temperature, try to iron it gently. The folds are smoothed out - it means that the selected mode is suitable, they are not smoothed out - continue the experiment with the next temperature mode.

If the composition of the fabric is unknown, you must first try to iron a small section of the curtain from the wrong side, after setting the iron to a minimum

The curtain ironing technology is unique for each particular type of fabric. The process can be complicated not only by the complexity of smoothing the folds, by the need to accurately select the desired temperature regime: it is also not easy to deal with large curtains. In this case, it is recommended to use vertical steaming technology.

Ironing the folds takes care and patience.

Large curtains are easier to iron with a helper

In the absence of special steam equipment, it is worth using a simple method of "ironing" using steam in the bathroom. The last method, which can be used without any special devices at all, is to hang a well-straightened, washed curtain on the cornice immediately after washing, delicate spinning.

Professional

These are production models that are recommended for enterprises that require daily care for a large number of fabrics and clothes. It:

• salons of curtains;
• theaters;
• studio;
• fur and fur shops;
• hotels;
• sewing production;
• sewing workshops, etc.

A production steamer for curtains and curtains for such enterprises is a necessary and irreplaceable equipment. The operation of a stationary model determines greater efficiency and contributes to increased productivity.

Experts recommend choosing industrial steamers for curtains to perform large volumes of work, because household models are simply not designed for long-term continuous work and will not fulfill the overwhelming mission entrusted to them.

MIE Magic Style

pros

• powerful steam supply;
• double rack;
• fast heating for work;
• good exterminator.

Minuses

• better steams dense fabrics than cotton;
• overall.

From 14 590 ₽

A model with a beautiful ergonomic design. There is no clothing or fabric that this device cannot handle. Steams quickly with 2250 watts. The steam generator generates steam 55 ml / min, which is then dispensed with a powerful jet under pressure. Water tank - 1700 ml. There is an automatic cord rewinder.

Bedspreads, curtains, tulle, outerwear and other textiles after the steamer has worked with them take on a fresh, well-groomed and tidy look. Reinforced double rack.The set includes an auxiliary board for steam ironing, as well as trouser clips and hangers.

MIE Grande

pros

• adjustable position of the ironing board;
• double heating;
• multifunctionality;
• a mannequin on a tripod, convenient for steaming things.

Minuses

• non-lockable steam supply button;
• inconvenient attachment for simple hangers.

From 19 490 ₽

This high-quality and powerful device is not in vain included in the rating of the best. It was created for the most accelerated ironing process of curtains, bedspreads, bedding sets, outerwear, ranging from densely woven to the most delicate cambric with rhinestones. Power 1920 W plus 360 W - iron power. The volume of the water tank is 1.2 liters. The steam temperature reaches 130-140 ° C with a productivity of 85 g / min.

Even very dry items with the strongest fixation of creases in a few seconds acquire a smooth and fresh look. This is available thanks to the model's double heating system and strong steam shock that easily penetrates the structure of any fabric. The model is equipped with an auto shut-off system. The design includes a movable multifunctional ironing board. Includes a hanger with an anatomical collar.

MIE Creative

pros

• powerful steam supply under pressure;
• sound notification of water consumption;
• double heating;
• long power cord with auto winding;
• works in 3 modes;
• mobile and maneuverable.

Minuses

short steam hose.

From 13990 ₽

This modern, powerful unit with a stylish design is one of the best devices of 2020. Copes with large volumes of wet heat treatment operations. The rated power of the device is 2350 W. The steam iron with a built-in heating element has its own power of 500-600 W. The surface of the iron is metal, constant heating does not allow to leave wet spots and stripes on the treated fabric.

The foldable hanger can hold up to 7 kg of clothes. The device disinfects, cleans, smoothes, eliminating any wrinkles and wrinkles. Its proper maintenance increases the useful life of the textiles. Light indicators indicate in which of the 3 modes the steamer is currently operating. The removable tank holds 2 liters of water.

Care advice

All housewives can figure out how to iron the curtains, if we take into account the characteristics of the material and resources for the implementation of the process. Leveling the curtain material becomes an easy process if you have a steamer. Here, even special knowledge is not needed. But not all housewives are armed from head to toe with technology, so you need to know how to properly use what you have.

Before starting ironing, check that the curtain fabric was damp. The material that has not reached complete drying is smoothed out with an iron faster and more fully. The next nuance of leveling the material is the care of the seams. if you iron them tightly, then a bright imprint of your efforts will be visible from the outside, so the seam is leveled with a spout.

To give yourself the opportunity to fully iron it, lay paper or fabric between the seam joint and the fabric.

How to iron curtains is one question, but how to align different fabrics is another. Lambrequins are also ironed wet after washing. Moderate washing mode for lambrequins is suitable. If you need to smooth synthetic lambrequins, the temperature should be lower than that of natural fabric.

Cotton curtains can be quickly steamed at any temperature, and viscose, lycra, organza and chiffon are ironed after washing in a damp state, on a delicate cycle and through an additional fabric.

It is not difficult to spoil the material by ironing after washing. A wrong mode or a faulty iron is enough and that's it, the curtain can only be thrown away. To avoid damaging the fabric, check the iron on a different fabric before starting. Iron on the inside if you are smoothing stretch fabric.

Artificial curtains should be ironed on a delicate cycle

At what temperature to iron with an iron

There are situations when it is impossible to use the iron. In this case, simple ways will help how to iron the tulle without an iron.

In the case when the tulle has subtle creases, it is enough to wet your hands and, as it were, smoothing out irregularities, smooth the problem area.

After a while, the product will dry out, and the irregularities will become almost invisible. But this method is not suitable for synthetic products.

You can iron the organza after washing with a household steamer, as well as with a slightly warm iron. Make sure the fabric is damp before ironing. And also for its safety, you need to take care of the lining, when using which the iron does not come into contact with the fabric. When ironing organza without using paper or fine cloth, stains may appear. When exposed to high temperatures, fabric fibers melt.

Unique qualities of professional models

Professional models have become very popular lately. Now they are used not only in dry cleaners, hotels and restaurants, but also at home. Such devices allow you to spend a minimum of time on household chores for processing textiles, which is appreciated by modern housewives.

The main advantages of a professional approach

• High power, which allows you to significantly reduce the processing time of one product. At the same time, there are delicate modes, which allows you not to be afraid for the quality of the fabric.
• Large reservoir for continuous operation without the need to add fluid.
• The location of the switches on the body provides for foot control, there is no need to break away from the ironing process.
• Reinforced racks are attached to such models, which are able to withstand even heavy overall things.
• The design is made of more durable materials, which minimizes the risk of damage to individual elements during operation.

The cost and dimensions of such devices increase significantly compared to home options, but in some cases this approach pays off.

We use a steamer

Compared to the newest iron, the steamer wins on many points. This useful device can greatly facilitate household chores.

Thanks to him, housewives can get rid of many laborious manipulations. Unlike irons, this appliance generates steam, which affects textiles.

The steamer has its advantages:

• speed and quality of ironing;
• the final result is absolutely not affected by the shape of the products and their material;
• together with the smoothing process, the fabric is disinfected, greasy stains are removed and the linen is cleaned;
• in addition to dirt and greasy stains, unpleasant odors, allergens and pathogens are eliminated;
• it is not necessary to remove the curtains during ironing.

Using a steamer:

1. Pure water is poured into a special reservoir of the device.
2. The curtain is hung on the cornice.
3. In the direction from top to bottom, you need to walk along the curtain with a steamer. Places of fabric creases deserve special attention.
4. If necessary, the process can be repeated one more time.

A steamer costs a lot of money, so if you need it 1-2 times a year, it is better to rent it or ask your friends.

How to wash tulle so as not to iron

The tulle does not need to be ironed if the fabric is washed correctly. For this, a manual method is used. In the bath, the linen is carefully laid out and cool or warm water is poured. Then add a powder or detergent that suits the type of fabric. If the material has a yellow or grayish tinge, stains, add soda ash or soda to the water.

When washing, do not rub the garments, but lightly stroke and squeeze. Silk and organza are washed immediately, while other types can be soaked in soapy water for a while.If the items are dirty, change the water and wash again.

Then rinse in clean cold water and hang to drain. When the water drains, hang curtains on the curtain rod, other items on the handrails or rope to dry.

You can machine wash the tulle if the tag allows it. As a rule, cotton and linen items can be washed this way. To do this, use only a delicate mode with a temperature not exceeding 40 degrees without spinning!

Add fabric softener during washing to soften fabric and water. After washing, rinse the clothes thoroughly, and when the water drains, hang them on the curtain rod or rope, straightening the folds.

Recommendations for different types of curtains

Modern curtains are sewn from a variety of materials - iridescent organza, heavy velvet, elegant taffeta, shiny silk or airy chiffon. Each of these fabrics requires its own, special approach, and before deciding how to iron curtains, you need to determine what they are made of.

If the decal is preserved on the curtains, use the manufacturer's recommendations when choosing the temperature regime. If it was not possible to find the label, before ironing the curtains, run a heated iron somewhere in the corner from the inside out so as not to spoil the material. Start with minimal heat, gradually increasing the temperature - this will help you figure out how to properly iron your curtains with a particular type of fabric.

Now let's look at specific recommendations for ironing different fabrics.

Cotton and linen

Cotton curtains and linen curtains can be ironed with strong heat - these natural materials are not afraid of high temperatures. Remember to keep the fabric damp during ironing. You can also add wet cheesecloth on top.

Viscose and polyester

It is recommended to iron curtains made of these materials at medium heat (about 150 degrees) and only from the wrong side. The front side of such curtains is not ironed, you should not use a steamer either.

Velvet

Velvet curtains are quite capricious and difficult to care for. After washing, they must be carefully wrapped in a terry sheet and squeezed slightly, trying not to wrinkle the fabric too much. The velvet is ironed in a completely dry state, moving the iron along the villi and placing a thick terry cloth under the curtains. The steamer is also not used for this material.

Chiffon and organza

Transparent curtains made of chiffon or organza look very beautiful, but require the utmost care from the hostess during ironing. In order not to damage this delicate matter, immediately after washing, hang it on the cornice and carefully straighten it - after drying it should be leveled. If there are some wrinkled areas on the fabric, try to steam the necessary places with a steam generator without removing it.

Advice. The role of a steam generator can be performed by an iron with a steaming function, which should not be applied to fabrics, but act at a distance, giving the iron an upright position. You can even use an ordinary kettle: wait for the water to boil and direct a stream of steam from the kettle spout to the crumpled area. Just do not overdo it, and do not bring any source of steam to the organza closer than 15 cm.

If you decide to use an iron, set the temperature to the lowest. Place your dried organza curtains on an ironing board and cover them with silk or tissue paper. Do not use steam in combination with ironing, otherwise the fabric may “ripple”.

Silk and taffeta

You need to iron such curtains in low temperature mode and from the wrong side. Do not moisten the fabric during ironing, otherwise ugly streaks may remain on it.

Embroidered curtains

Fashionable curtains decorated with embroidery should be sprayed with a spray bottle before ironing. Start ironing these curtains from the inside out, pressing with a hot iron in the embroidery area - this will allow it to maintain its relief.

Lined curtains

Lined curtains are reversible and will have to be ironed inside and out to give them a neat look. Since these curtains are made from different types of fabrics, be sure to select the appropriate heating mode for each side.

Self-service laundry facilities are available. For ironing large items, there are presses and drums that easily iron bulky items.

If you do not have confidence in your abilities or you are afraid to ruin expensive curtains, take them to the dry-cleaner - there the salon staff will carefully clean and iron the material, returning it to you in perfect condition.

How to iron tulle from different materials

Before you iron the tulle, you need to clean the sole of the iron. Marks and dirt must be removed so as not to spoil the delicate material. Before ironing, be sure to read the label to take into account the recommendations and properties of the fabric.

In this example (polyester). Ironing allowed at temperatures up to 100 - 110 ° C

Organza

Since the fabric is woven from very fine fibers, it must be handled with extreme care. There are several ways to gently iron organza tulle:

• Steam treatment. The easiest and fastest way is to use the steam generator or the steam function on the iron. It is necessary to hang the tulle on the cornice, and then walk around the entire cut 1-2 times.
• Iron with an iron. The heating mode is selected depending on the composition of the organza. Iron the semi-damp curtains from the seamy side through cheesecloth.
• Hanging on the curtain rod immediately after washing. If the fabric is not straightened, then the folds and creases should be moistened with water from a spray bottle, straightened with your hands and left to dry.

Nylon

The fabric is made from oil-derived polyamide fibers. Ironing nylon tulle is not recommended, as the material melts easily.

If a process is necessary, it is important to do it right:

• The nylon should be smoothed, barely touching, or better - through a thin cotton fabric.
• Avoid smoothing movements to avoid stretching the fabric. The iron must be rearranged from place to place.
• Capron should not be moistened during ironing or processed with a steam generator, as the fabric will stretch and become covered with waves.

Linen and cotton

Natural fabrics are easily wrinkled, therefore, even during washing, you need to take care that the material does not deform. To do this, you need to use the delicate mode and turn off the spin. As a last resort, use the lowest speed.

It is best to hang the cotton tulle so that the glass is water, and then attach it to the cornice and carefully straighten it. When the canvas is dry (it takes about 1 day), it will look freshly ironed.

If you can't do without an iron, then you need to iron the cotton tulle at 90-120 ° C from the wrong side. For severe bruises, iron through a damp cloth.

Linen tulle is ironed at high temperatures, after underdrying or moistening. As with cotton fabrics, they can be hung wet for a natural stretch.

Veil

A delicate gauze-like fabric can be made from silk, cotton, and even wool. But today, synthetic material is more often used for curtains. It is recommended to iron it only after washing, since any speck that is invisible to the human eye will be strongly fixed under the iron.

To less injure delicate fabrics, do not twist and wring out during washing. As soon as the water drains, the tulle must be hung on the cornice, gently straightened and left to dry.

If you need to iron, it can be done with a steam generator or an iron heated to a temperature not exceeding 110 ° C. To prevent the fabric from stretching, it must be ironed through a thin cotton fabric, moving the appliance from place to place and avoiding back and forth movements.

Polyester

The fabric is extremely capricious to care for, so even a delicate wash does not always save you from bruises.In addition, synthetics do not have the property of self-leveling, so hanging in a wet state will do nothing. Curtains are recommended to be ironed underdried or moistened from the inside out through cheesecloth.

Viscose

Artificial material, the raw material for which is wood. It is better to steam the viscose by hanging it on the cornice. If vertical processing is not possible, then iron the tulle on the board at 120 ° C. Do not spray from a spray bottle, as traces of water will appear on the canvas, and the material itself will become wavy.

How to iron curtains without removing them from the eaves

Sometimes situations arise that you need to smooth out the curtain on the window right now and not a second later. It is not known what the reasons can be for such a catastrophic rush, but there is one way that allows you to smooth out window curtains in a short time.

For this purpose, the well-known vinegar is used. Prepare a solution: vinegar, water, and any fabric softener. The amount of ingredients must be the same. Pour the composition into a spray bottle and spray it evenly over all wrinkled areas.

After drying, the mixture does not leave any marks or stains, but at the same time the curtains themselves will immediately take on a completely different appearance.

How to smooth curtains without iron and steamer

How to iron clothes or curtains without an ironHow to iron curtains without an iron or steamer
We iron curtains quickly and easily without an iron or steamer

Without iron
Sometimes, out of inexperience or ignorance, people spoil expensive things. The most common reason is the wrong choice of temperature regime, as a result of which the delicate tissue base begins to shrink, and holes form on its surface. If the material has deteriorated in an inconspicuous place, then you can try to trim the damaged piece of fabric. If the curtain is burned in the middle, then there is nothing you can do about it, the product can be thrown away.

1. Washable and tumble dry at high speed. As a result, a large number of creases are obtained on the curtain, it is difficult to fix them.
2. Untimely ironing. The product lies unnecessarily for several weeks after washing, therefore it is difficult to smooth it.
3. Using an iron or steamer with a dirty surface. Carbon deposits on the sole immediately transfer to the fabric and, under the influence of temperature, eats into its structure. It is difficult to remove carbon deposits from the curtain, so it is removed from the sole in advance. You can remove carbon deposits with a special cleaning pencil. It can be purchased from Household Items.

How to smooth curtains without iron and steamer

Features of ironing some materials

Most of the types of fabrics that are combined under one concept of tulle have similar processing methods. However, there are several types of material that require special skills to work with. These include:

• organza;
• nylon.

Let's take a closer look at them.

Organza

Delicate fabric, interaction with which requires special care. If you do not pay enough attention to it during processing, the product is easily damaged, becoming unsuitable for further use.

When eliminating folds on organza curtains, consider the following nuances:

1. Some household appliances used for ironing fabrics have a steam boost function. Its use is not recommended, since wavy folds appear on the surface of the organza, which are difficult to get rid of in the future.
2. The organza is ironed only after it is completely dry.
3. At high temperatures, the soleplate of the iron may begin to stick to the surface of the iron. To avoid this situation, the curtain is soaked in a saline solution after washing. For its manufacture, 5 liters of water and 20 grams of salt are taken.

Nylon

Nylon is no less capricious material, the heat treatment of which requires some preparation:

1. During ironing, there should be a gauze pad between the curtain and the sole of the iron.
2. Do not heat the iron above 100 o.When the specified temperature is exceeded, wavy folds are formed on the surface of the nylon.
3. Do not dry the nylon too much before ironing. The drier the tulle, the more difficult it is to influence it.
4. Moistening the fabric with a spray bottle is prohibited, since there is a high probability of the formation of yellow streaks on its surface.

How to do everything correctly depending on the material?

The process begins by checking the soleplate of the iron. There should be no tan marks or any other contamination. If found, remove them or use another iron, as dark spots may remain on the curtain.

It is good if the iron has a steaming function that will help you smooth out the tulle easily. If this function is not available, then the surface of the ironing board should be covered with damp gauze.

It is better to refuse to use a sprayer, as stains may remain on the canvas. Don't wait for the tulle to dry completely. This makes it easier to smooth.

Cotton

For such material, the minimum temperature regime of the iron is suitable. Do not wait until the cotton fabric is completely dry.

This will only lead to wrinkles that are difficult to smooth out. Therefore, you can immediately hang it in place.

To avoid ironing marks on the cotton tulle, the soleplate of the iron should not heat up above 100 degrees. The canvas is laid face down on the board. Use damp gauze on top to protect the fabric.

Linen is also made up of natural fibers. Therefore, he is not at all afraid of high temperatures. And to make the canvas as even as possible, it is ironed wet. In a situation where the curtain has time to dry, use a spray bottle or wet gauze.

To save time, some housewives hang linen tulle without waiting for it to dry. Drying in this position in a warm room, the curtain will take the shape it needs.

Silk tulle is able to flatten itself without using an iron. Therefore, squeezing slightly, it is hung in place.

At room temperature, it will dry out and take on an attractive, even appearance.

If creases are visible on the fabric, it will have to be ironed. To do this, a sheet of white paper is placed under the fabric. Do not spray on silk from a spray bottle, this will protect against streaks on its surface.

It is also better to cover the top with a silk curtain with paper or gauze and iron only in this way.

Organza

Organza is a light and airy fabric that has an attractive look. But, despite its beauty, this tulle is very capricious.

Some rules will help to facilitate ironing of organza:

• When washing organza, the linen should be rinsed in salted water to prevent wrinkling.
• You need to iron the organza in the most gentle temperature regime. It is also advisable to put a sheet of paper or wet gauze between the iron and the curtain.
• During drying, this fabric must not be folded, otherwise creases will appear, in front of which even an iron will be powerless.
• The ideal option for ironing organza would be to use a steamer. This can also be done on a canopy, when the fabric has not yet completely dried out.

Nylon

Some tricks are used for ironing:

1. The nylon tulle is ironed wet.
2. Ironing starts from the most inconspicuous area. These actions check the correctness of the selected temperature regime.
3. The iron should "float" over the surface, i.e. hardly touch the material.
4. Some iron models have special attachments. When used, no traces remain on the fabric.

   In the absence of such a device, the product is covered with gauze on top.

Polyester

In addition, it is imperative to choose the correct mode. The temperature of the soleplate of the iron should not exceed 100 degrees.

The synthetic fabric is ironed damp. To do this, lay it out on a hard surface with the wrong side up.

In order not to spoil the fabric, ironing should be started from a corner or other inconspicuous area. Additional protection will be the use of gauze.

Viscose

So that the viscose tulle does not lose its color, you need to iron only from the inside out, using steaming.

The temperature regime must be selected carefully, checking it on an inconspicuous area of ​​the tulle. Optimum is 120 degrees.

Steaming viscose is allowed only in an upright position. If you try to do this on an ironing board, waves may form on the linen.

Vertical steamer: what to look for when choosing

So what are the characteristics that will tell you a good vertical curtain steamer from one that is disappointing? There are several of them.

Any textile can be processed - any tailoring and shape.

Steam intensity

The higher the better, in the range from 40 to 140 g / min. At lower intensities, the quality of work will decrease proportionally.

Power

Optimal from 1600 to 2600 W. The higher the power, the faster the water heats up. In addition, a device with a higher rating is guaranteed to withstand long-term continuous use.

Heating time

The interval from the moment water is filled into the tank until the device is ready for operation. Depending on the capacity, the process takes from 2 to 10 minutes.

The unit removes grease stains, dirt, unpleasant odors and even germs.

Number of modes

It is good if there are 2-3 modes to choose from, depending on the thickness of the fabric.

Steam hose and cord length

Electric cord not less than 2 m, hose not less than 1.2 m. The main thing: they should not be short, this is extremely inconvenient!

Water tank volume

It depends on how often you have to interrupt work and collect water. The minimum volume of the tank should be at least 1 liter, but preferably 2 liters.

Steaming curtains is possible without removing them from the eaves.

The presence of protection against scale

If there is no such system, then each time before use, special tablets must be added to the water. They are commercially available, but this is an additional expense.

Having dealt with all the desired characteristics, you can proceed to choosing the most suitable model for you. There are no problems with a variety of problems, on the contrary - there are so many options that you can easily get confused in them.

So that the question of choice is not a burden, you can use a special rating.

Rating of the best steamers for curtains

How to choose the right type of ironing equipment and not make a mistake? What should you pay special attention to first of all? Let's try to figure it out. Numerous reviews of hostesses who have already appreciated the work of steamers argue that the device should also include several options that allow it to be used for different types of fabrics and products.

It is equally important when choosing a device to understand in advance what the word steamer means, how it functions, and what is its essence. In operation, it is such that under the influence of a strong jet of steam, you can see an effect comparable to the principle of working with a traditional iron, but several times more convenient

A steam generator operates in the steamer. It is this detail that allows us to bring things to perfect condition, and always keep curtains and other textile accessories at their best.

The curtain steamer is able to smooth out the smallest creases

When choosing a steamer, you should pay attention to its following advantages:

• Processing of any material;
• Cleaning of fabrics;
• Smoothing out the smallest folds;
• Removing all kinds of stains at the same time;
• Disinfection of the material.

As we can see, the device can be completely multifunctional, and when choosing, you need to find a device that would do the job 100%.

General rules

Iron any curtains after washing until they have time to dry completely. After all, straightening a slightly damp cloth is always easier than trying unsuccessfully to iron completely dry creases on the cloth.

Be especially careful when ironing the seams - the iron should only lightly touch them, otherwise prints may remain on the opposite side of the fabric. Due to the large size of the linen, hostesses often do not know how to position the fabric on the ironing board and how to iron it without laying it on the floor and without crushing the areas that have already been ironed

We offer you a choice of two ways by which you can cope with this difficulty:

Due to the large size of the linen, hostesses often do not know how to position the fabric on the ironing board and how to iron it without laying it on the floor or crushing the areas that have already been ironed. We offer you a choice of two ways by which you can cope with this difficulty:

• Place your ironing board right next to the window. Start ironing from the top, gradually hanging them from the board. Before the material touches the floor, lift it up and hang it on the curtain rod. Put the bottom half of the curtains on the board - now you can iron them calmly, without fear of wrinkling the already ironed fabric.
• There is an interesting folk trick for ironing large linens. Using it, you can quickly iron your curtains even without an ironing board. Take a wide board and a round stick - their surfaces should be as smooth as possible. Wrap the curtain around the board and start ironing the material right on it. Carefully wrap the ironed parts on a stick - this way they will not wrinkle.

How to iron curtains made of different materials

Read the label or tag carefully before ironing and washing your curtains. They will tell you how to do it right.

It is important to use a suitable temperature setting so as not to damage or degrade the material. Read more about the values ​​on the product label here

And then we will figure out how to iron a curtain made of this or that material.