Characteristics of respirators ru-60m

Storage rules

Remember that the date of manufacture must be on the packaging. The warranty storage of the RU-60M respirator and replaceable cartridges is 3 years, except for the “G” marking. They are stored for 1 year. In addition, cartridges marked "G" must be packed and stored in tightly sealed plastic bags.

Both respirators and cartridges should be properly stored in cardboard boxes or wooden boxes in unopened rooms at temperatures from -25 degrees Celsius to +25. The relative humidity should not be higher than 80%. It is necessary to exclude the effect of direct sunlight, poisonous vapors on the products and do not expose them to any mechanical stress.

An overview of RU-60M respirators is presented in the video below.

reference Information

1. BIERS
2. Primer MB
3. Paint coatings
. . . .
4. Goggles
5. Preparation of the steel base
6. Preparation of the steel surface [.
7. Steel pipes
8. Adhesives
9. Surface roughness
10. Plastics
11. Tensile test method
12. The basis of BIUR
13. Urethane prepolymer SUREL-ML
14. Dressing gowns for men
15. Rubber technical gloves
16. Gas and dust respirators
17. Respirators ShB-1 PETAL
18. Requirements for protection
. . .
. . .
19. Welded steel pipes
. .
General information
Products
Pipe processing
Pipe welding
Out. pipelines
Mounting
Installation safety
Classification of pipelines
Pipeline categories
Factors affecting pipelines
Nominal, working and test pressures
Influence of temperature above 450 ° С
Observing metal creep
Reliable piping performance
Sanitary facilities
Coating technology
Stainless steel
Gas pumping units
Coating
Pipeline
Oil product pipeline
Bitumen
Biurs
Primer
Polymer
Adhesion
Surface
Degreasing
Mixture
Hardener
Viscosity
Flange
Dispenser
Heating
Tolerance
Pollution
Trial
Passivation
Kerosene
Glue
Climate
Component
Compressor
Butter
Butt
Pump
Stabilizers
Damage
flwn.imadeself.com/33/

We advise you to read:

14 rules for saving energy