Construction overalls: an overview of men's and women's workwear for work on a construction site, disposable and winter, orange and white overalls, selection criteria

Exploitation

To prevent arbitrary unbuttoning of the straps of the overalls during work, it is necessary to learn how to correctly fix them in the holes of the fastex (a special plastic buckle with a trident). So, in order to securely tie the straps of workwear, you must:

unfold the fastex (buckle) with the right side facing you;
pass the end of the strap into the hole located next to the trident;
pull the end of the strap towards you and thread it into the second hole located farther from the trident;
tighten the strap.

During the use of work clothing, the recommendations provided by the manufacturer should be strictly observed. So, in overalls made of flammable materials, it is strictly forbidden to work near open fire or sources of high temperatures. To work in poor visibility conditions, it is necessary to use only signal clothing or equipment with reflective elements.

In the next video, you will find a review of the Dimex 648 winter overalls.

For which professions the overalls are included in the workwear set

In any region of Russia there are workers who use overalls in their field of activity. For some, a white robe is enough, while others, being constantly on the street, wear overalls and work suits.

Sets with overalls are suitable for any profession if the work is carried out outdoors, especially in the cold season. A large number of Portwest fireproof coveralls are offered in our catalog.

Professions for which the presence of overalls in winter is simply necessary:

fireman;
builder;
crane operator;
high-altitude installer;
road repair specialties;
electrician and others.

When working for a long time in the cold, it is the overalls that will help the employee better keep warm and do their job efficiently.

Overalls are very important for the regions of the Far North, where severe frosts are accompanied by strong winds.

Features and purpose

The "Casper" suit is a one-piece jumpsuit with a hood made of non-woven fabric - spunbond. This type of protective workwear is suitable for the painter and builder, it is quite popular in the food and chemical industry, it is used in the medical industry and archeology, when working outside the field.

Spunbond, used for sewing Casper overalls, is made of synthetic fibers, which prevents the growth of microorganisms on its surface. Even in difficult working conditions, personnel are well protected from any external threats. In addition, the spunbond has other advantages:

light weight;
increased mechanical resistance;
reduced electrical conductivity;
crease resistance;
heat resistance.

The sizes and patterns of "Casper" suits are focused on not hindering human movements. They can even be worn over winter insulated overalls - the product will also reliably protect against specific dust and dirt, and will not tear when stretched.

The material has a breathable structure, does not create a greenhouse effect, and removes heat evaporated by the skin well. Its density depends on the model and purpose of the protective suit, on average it reaches 15-160 g / m2. Spunbond has no fluffy inclusions, it is smooth and comfortable to wear.

The main purpose of disposable protective overalls is to ensure the safety of personnel. Among the main functions are the following.

Protection against exposure to damp environments. Spunbond, especially laminated, does not get wet.

Contamination protection. Even when working with oil products and other aggressive chemicals, they do not penetrate deep into the structure of the fibers, they remain on the surface of the PPE.

Prolongation of the service life of personnel overalls. By wearing a versatile jumpsuit, it is less prone to abrasion.

Exclusion of contact of workers with products

This is important in the field of food production, pharmacology.

Protects the skin from direct contact with toxic fumes and liquids. In the case of alkalis and acids - only in concentrations up to 40%.

Reducing the risk of static electricity build-up on employees' clothing.

Ensuring sanitary and epidemiological safety - it is also guaranteed by the disposable use of suits.

Protection against contact with potential allergens - dust, fluff, fungal spores.

They employ exterminators and sanitary doctors, laboratory workers, representatives of the agricultural and mechanical engineering industries. Such PPE are recommended for use in car services and paint shops, as well as when carrying out painting and finishing work indoors and outdoors.

Selection recommendations

First of all, you need to decide what you need a jumpsuit for, as a work uniform or casual wear.

If there are no strict rules, then general recommendations can be used:

high strength and density of fabric, tear resistance is required;
the material should not "shrink" or deform after washing;
it is desirable that the canvas is "breathable", especially when it comes to summer clothes.

The overalls should be comfortable, not restraining movements, so that you can sit down without problems, spread your arms, bend over.

Additional details also come in handy:

strap length adjusters and an elasticated insert on the belt to maximize the fit of the equipment in size;
chest pockets, patch pockets and cut-in pockets - the more, the more practical, especially if you need to carry tools and various small parts with you.

Overalls as a casual wear for men should be not only comfortable, but also stylish. Fashion brands offer just such options, tailored taking into account all modern trends. The designers made sure that you can look original and wear a comfortable thing. The choice in this case depends only on personal preferences in terms of colors and cut.

Work overalls can not only be bought in the store, but also sewn with your own hands. You will learn how to do this by watching the video below.

Peculiarities

Due to the peculiarities of their functional duties, construction workers must wear overalls

It is important that construction overalls meet three basic criteria.

Security. The main purpose of any workwear is the maximum protection of an employee while performing work. Such clothing should be dirt-repellent and should not allow dust to settle on the human body and accumulate on it. Depending on the characteristics of the type of activity, you can also choose a set with refractory and water-resistant properties.

Practicality. The main advantage of the overalls in comparison with any other types of overalls is their integrity, due to which the clothes do not slip during sudden movements.

Wear resistance

It is very important that work clothes are not disposable. It should not fail after the first day of work, which is why such semi-overalls are made from practical and durable fabrics that can withstand frequent washing, cleaning and ironing.

How to put on and use correctly?

In order for the "Casper" suit to fully demonstrate its protective properties, it must be properly operated.To put on the jumpsuit, it is recommended that you follow the step-by-step instructions.

Take the product out of the packaging. Check its integrity, straighten it.
Zip up and open. The clasp should not bite or come loose.
Check the pockets of the workwear for any sharp, piercing objects. If this is not done, the suit may be damaged while wearing.
Put on removable shoes or protective overshoes on your feet, in which work will be carried out.
Put on a jumpsuit on your feet. Gently spread it to the waist. Put your arms through the sleeves, protect your head with a hood.
ZIP up. Protect hands with appropriate PPE.
During work, it is forbidden to fasten the parts of the suit with pins or other sharp objects. Do not leave flammable liquids, lighters, aerosol cans in his pockets.
In food and other industries with increased requirements for sanitation and hygiene, protective clothing must be removed before visiting the toilet room.
Upon completion of the work, the suit is carefully removed. It is rolled up with the outside inward, placed in a polyethylene wrap.

It is important to remember that, in accordance with the requirements of sanitary and hygienic standards, upon completion of work at the enterprise, personnel should take off disposable suits only in a specially designated room. The used suit is sent to the waste disposal tank

When used at home, the Casper overalls are thrown away and stored separately from household waste. You can put it in a sealed bag. PPE is not reused.

An overview of the protective suit "Casper", see below.

How to choose a jumpsuit

Before buying a jumpsuit, you should make sure that it is suitable for the job you will have to do in it. There should be enough pockets, good quality fabric and good tailoring. The model must be selected according to the size. It is unacceptable that the overalls hinder movement or be large - this can lead to tragic situations and consequences.

Depending on the region for which the overalls are bought, you should select high-quality insulation so that it protects from wind and cold, but does not overheat the employee

This is especially important for those employees who are engaged in hard physical labor. The suit should correspond to the specialty and help to carry out their duties

The appearance of winter men's workwear

Winter overalls can be sewn as a full-fledged winter suit: with sleeves, insulation and even a fur collar and a hood. In addition, there are overalls on which you need to put on a warm jacket on top. As well as semi-overalls, which are more like trousers with suspenders.

Jumpsuits

Working overalls, made in the form of full-fledged winter clothing, will completely protect the employee from cold and wind. High-quality fabrics used in sewing, as well as insulation that will help you stay warm in winter on the street, create a unique model of workwear.

It is worth paying special attention to the Dimex overalls, comfortable and reliable, the fabric is capable of repelling dirt and water, as well as withstanding many washings. There are no unnecessary details in the overalls, nothing will interfere with work, the pockets are tailored so that their presence is imperceptible

A lot of additional accessories that make it comfortable to wear and put on (take off) workwear.

Overalls worn under a jacket have no sleeves. But they are equipped with high details that cover the chest and back, which helps to better protect against wind and frost. The main difference between these overalls is the inability to wear them without a jacket.

Semi-overalls

This piece of workwear looks more like trousers with suspenders.It is convenient for a comfortable fit of the trousers to the body, the straps are adjusted to the worker's height, which helps to create additional comfort and protection from the cold.

Peculiarities

Like any other type of workwear, work overalls have a number of specific features that distinguish them from everyday wardrobe items. One of these features is the increased ergonomics of the product, which ensures the convenience and safety of a person carrying out a certain type of activity.

This type of workwear must have such properties as:

dust and moisture resistance;
fire resistance (non-flammable);
resistance to mechanical and chemical stress;
light weight;
elasticity.

The work overalls should not restrict or restrict the user's movements, impede blood circulation, squeeze the body and / or limbs. The style of the product must be designed in such a way that the worker can freely carry out movements of a certain amplitude (tilting the body forward, backward and to the sides, abduction / bending of the arms and legs).

Depending on the specifics of the activity for which the overalls are designed, it may have certain functional details. These include:

elements for fastening the safety system;
reinforced protective pads (for example, on the knees, chest and elbows);
windproof valves;
additional pockets;
reflective stripes.

Overalls models designed for certain types of activities may have a special color. This may be due to both safety requirements imposed, in particular, on signal clothing, and the specifics of working conditions, for example, when working in the bright sun in hot weather.

Work overalls, like any workwear, may have additional elements of distinction. Such elements include stripes or applications with the company logo, an emblem containing the letter designation of groups and subgroups of harmful external influences (mechanical, thermal, radiation, chemical effects).

Criterias of choice

When choosing women's and men's overalls for construction work, it is necessary to study the working conditions and determine the list of harmful effects from which the clothing will have to protect its owner. In this matter, the employer must rely on the requirements of state standards, as well as technical regulations in force on the territory of the countries of the Customs Union.

Particular attention should be paid to the design of the wristbands, cuffs, the way of decorating the wings, tighteners, the presence of ventilation holes and reflective tape. Any finishing materials should be selected taking into account their resistance to aggressive environments, as well as climatic factors in which the overalls will be used

Particular attention should be paid to the ergonomics of the overalls. It is desirable that it be equipped with pockets with small and large compartments to accommodate all the necessary work tools and consumables.

Please note that when performing work on a construction site, it is often necessary to get on all fours, so it is advisable that the semi-overalls in the knee area be reinforced with additional pads.

For the choice of construction overalls, see below.

Criterias of choice

When choosing a Casper suit, all possible factors must be taken into account. First of all, it is recommended to purchase only products certified in the Russian Federation with individual packaging. In this form, the suit can be stored for up to 5 years: after the expiration date, the preservation of its properties is not guaranteed. That is why you need to carefully check the release date of the batch of products.

When purchasing overalls for staff, you don't have to look for separate male and female models - the cut is made taking into account the convenience of employees of each gender.But the size range will have to be taken into account. Usually it starts with sizes M - 44-46, the maximum is 5XL, which corresponds to a chest circumference of 140 cm.

When choosing a jumpsuit, you need to take into account its growth characteristics. They are indicated with a hood, in separate suits - up to the neckline. Options L (170 cm), XL (176 cm) are considered standard.

For special operating conditions and PPE must be appropriate. The higher the density, the lower the risk of accidental rupture or damage to the material.

Terms of use

Chemical, biological and radioactive contamination can seriously affect human health, therefore there are rules for the use of protective clothing.

It is important to learn how to put on your jumpsuit correctly.

This must be done in a special place. In production, a separate room is allocated, and at home, you can use a spacious room such as a garage or a barn.
Before dressing, you must inspect the suit for damage.
Overalls are worn on other clothing that is close to the body, in the pockets of which there should be no foreign objects.
After the suit is on you, you need to fasten all the zippers and pull on the hood. Then they put on gloves and special shoes.
The edges of the garment must be secured with special adhesive tape. This will completely isolate the skin from harmful substances.

It is necessary to take off the suit with the help of:

first, gloves and shoes are washed to exclude the contact with the skin of the substances on them;
the mask and zippers on clothes are treated with a special solution;
first remove the gloves, then the hood (it must be turned inside out);
the jumpsuit is unbuttoned to the middle, after which they begin to pull it together, folding it with the front side inward;
shoes are removed last.

Dispose of used clothing in accordance with the laws of your country. Most often, disposable clothing is disinfected and recycled, while reusable clothing is cleaned of contamination and reused.

An overview of the Casper workwear in the video below.

The main characteristics of the jumpsuit

Winter overalls should be comfortable and comfortable, do not hinder movement, and protect from the cold. The simpler the cut, the more comfortable the item is to wear. Frost protection is provided by:

windproof fabric;
high-quality insulation;
zipped windbreak;
stand collar.

The presence of a hood will be very useful.

Textile

The fabric can be used for sewing natural overalls, but membrane materials are more often used. The well-known company Delta plus prefers to use blended fabrics containing 65% polyester and 35% cotton. The light industry does not get tired of working on improving the quality of protection and lighter models for workwear, the model range and ease of use are constantly increasing.

Insulation

High-quality insulation will provide reliable protection from the cold. The cheapest and most proven materials are batting and synthetic winterizer, fleece. They keep warm well, are often used in sewing workwear, especially to reduce the cost.

More expensive and modern are firetech and thinsulate, holofiber, isosoft. Lightweight, durable, with good thermal insulation properties. High-quality, newer and more modern heaters - shelter, thermofin and slimtex. One layer of such insulation is comparable in quality to a double layer of batting, while they are very light, breathable and hypoallergenic.

Protective elements

The protective elements of the overalls include:

quality linings;
collar;
Hood.

Outside in frosty weather, they will help you to protect yourself from the cold and do the necessary work in full

The presence of an impregnation that protects against dirt and water is important; impregnations against high temperatures are used in special models

Choice

Before purchasing workwear, you need to conduct a risk analysis

For this, it is important to know in what area the overalls will be used and what harmful factors there are. Working with gases in a breathable suit is dangerous and even stupid, as well as in a water-permeable one - with liquids

Characteristic

A jumpsuit is a piece of clothing that connects a jacket and trousers that fits snugly to the body. Depending on the level of protection, it may have a hood with a respirator or face mask.

The characteristics differ depending on the model, but the general ones can be distinguished:

resistance to chemicals;
strength;
impermeability to liquids;
comfort in use.

The colors of the protective clothing must meet specific requirements:

resistance to dirt during construction, locksmith and similar works (white, gray, dark blue, black);
visibility in hazardous conditions (orange, yellow, green, bright blue).

Different types of workwear correspond to one of four levels of protection.

Level A. It is used for better protection of the skin and respiratory organs. This is a fully insulated coverall with a full hood and a respirator.
Level B. Needed for high respiratory protection and low - body. A semi-overalls with a jacket and a face mask are usually used.
Level C. Coveralls with a hood, inner and outer gloves, and a filter mask are used in situations where the concentration of hazardous substances in the air is known and meets the criteria for protective clothing.
Level D. The minimum level of protection, saves only from dirt and dust. Regular breathable jumpsuit with hard hat or goggles.

Overalls are used in many industries. First of all, in construction, where workers are surrounded by a large amount of dust, dirt and harmful substances. Also in the chemical industry, agriculture, healthcare, the Ministry of Emergencies. Wherever there is a risk of harmful substances entering the body, the use of protective equipment is required.

Varieties

The design and functional features of the overalls depend on the specifics of the conditions in which it is intended to be used. Depending on the type of cut, which is associated with the functional purpose of the product, it is customary to distinguish between overalls:

open (semi-overalls), which are pants with a bib and shoulder straps;
closed (deaf), representing a jacket with sleeves, combined with trousers into one single piece.

Modern manufacturing firms offer consumers a wide selection of various models of overalls with buttons, Velcro, and zippers. Models with double zippers are popular, which greatly simplifies the process of putting on and taking off equipment. Depending on the recommended duration of use of the product, a distinction is made between disposable and reusable overalls.

Seasonality

The style of the overalls is also determined by the seasonality of the work for which it is intended. The same factor affects the type of material from which the product is made. Summer work overalls are usually made of lightweight, durable materials that have moisture and windproof properties.

The most convenient for working outdoors in hot conditions are transformer overalls with a detachable top. Most often, light-colored overalls are used for summer work in the open air.

Winter overalls for work in conditions with low air temperatures are made of moisture-proof materials with high thermal insulation properties. To prevent heat loss when working in cold weather, such models of overalls are usually equipped with additional auxiliary elements - removable hoods, elastic cuffs, drawstrings, lining made of thermal insulating material.

Materials (edit)

The most popular material for the manufacture of overalls is twill weave. This fabric is characterized by increased strength, durability, and hygiene. Possessing good air permeability, it helps to maintain an optimal microclimate inside clothes, ensuring the comfort and convenience of a person working in high temperatures.

Tyvek is a non-woven, durable and environmentally friendly material characterized by high strength, vapor permeability, moisture resistance, low weight. This high-tech material, made of very dense polyethylene, is resistant to both mechanical and chemical attack.

Tarpaulin is a type of heavy and dense fabric impregnated with special compounds that give the material fire and moisture resistance. Not only heavy-duty types of workwear are made of tarpaulin, but also covering materials and structures - tents, awnings, awnings. The disadvantages of tarpaulin products are considered to be significant weight, lack of elasticity.

Denim is also often used to make work overalls. It is hygroscopic, resistant to mechanical stress, and has good air permeability. At the same time, denim overalls weigh much less than tarpaulin equipment.

Colors

The colors of the overalls usually allow others to determine the specifics of the worker's activity. Thus, overalls of bright orange, red and lemon-yellow colors, which have high contrast and ensure maximum visibility of a person at dusk, as well as at night and in the morning, are often used by road workers, builders, and emergency service specialists.

White coveralls reflect the sun's rays, so they are often used as equipment when working outdoors. Such overalls are very popular among craftsmen-finishers - plasterers, painters. Also, light-colored overalls are used in the medical field (laboratories, expert bureaus), as well as in the food industry. Black, blue and gray overalls are more resistant to dirt than light-colored overalls.

Views

All disposable "Casper" suits made of spunbond produced today can be divided into the following modifications.

Classic. She is also "Casper-3" - a one-piece jumpsuit with a hood that reveals only the feet and hands. This model has a zip fastener, complemented by a protective strip, elasticated contours of sleeves, trousers and a hood for the most snug fit. The model is fitted, with an elastic band at the waist, there is a pocket inside. The product is made of material with a density of 40 to 60 g / m2, colors - white, blue.

The size range is indicated by international symbols of the established sample or numbers corresponding to the half-girth of the chest.

Materials (edit)

The choice of material for sewing construction workwear is of no small importance. Usually uses 3 types of fabric for working semi-overalls

Natural - cloth and moleskin, they are made from natural fibers (cotton, linen or wool).They are comfortable to wear, hypoallergenic and absolutely safe for the body, however, their protective characteristics are not enough for effective use in the construction industry.
Synthetic - this includes fleece, nylon, and oxford. These fabrics are made from combinations of acetate and viscose fibers, such compositions are particularly durable due to their increased abrasion resistance.
Mixed - twill, greta, diagonal. In most cases, such materials are 30-40% synthetic fibers and 60-70% natural. Experienced professionals recommend choosing clothes from these materials, since their natural component will provide maximum comfort for the body, and the synthetic one causes increased performance. In addition, clothing made of blended fibers has an affordable cost, available to any construction company.

How to wear?

Usually in production there are requirements regarding equipment and its selection. In this case, you need to follow the established rules so as not to violate safety precautions. Recently, however, an interesting trend has spread - overalls are worn not only at work, according to instructions, but also as an everyday option.

As a rule, in this case, lighter cotton models are used. They can be found in an assortment of different fashion brands, or ordered from a tailor shop according to your own measurements. However, in a workwear store, you can choose something suitable with a good sense of style, moreover, it will be significantly cheaper. Many men will appreciate this idea - no need to think about whether the shirt fits jeans, just put on a jumpsuit. It is very convenient - it doesn't press anywhere, the pants don't slip at the wrong moment.

But there are still some guidelines to consider if you decide to wear such clothes:

jumpsuit with straps is not the best option, but the style with sleeves can be a stylish find;
you should not choose shortened models, they even make respectable men look like schoolchildren;
sneakers or high boots are suitable as shoes, but classic shoes will look inappropriate;
you can put on a T-shirt or shirt under the overalls, then you can safely unbutton it if it gets hot;
select the option by size, oversize in this case will look ridiculous.

The jumpsuit can be worn for walking around the city, it will also be an excellent option for travel and long trips by car. Fashionistas and lovers of extraordinary solutions can even come to a party in such clothes, especially if you supplement it with different stripes and an original belt.