Model range of Texas motor cultivators. features of operation and maintenance, video reviews and reviews

Operation and maintenance

Running in

To extend the life of your Texas cultivator, to reduce breakdowns and downtime, the first step is to run the machine in. At the beginning of the running-in procedure, the engine should idle, then gradually start to work in a gentle mode - up to 50% of the load for 10-13 hours, it is allowed to perform various types of soil cultivation.

At the stage of running-in, the main units and mechanisms of the machine are run-in, therefore, attention should be paid to their functioning: the clarity of gear shifting, the condition of the moving parts of the structure, chassis, wheels, the presence of noise. At the end of the running-in, change the oil, once again carry out a technical inspection of the cultivator

Fuel, oil

Gasoline cultivators in Texas consume unleaded AI-92 gasoline, the fuel consumption is quite economical - 1 l / h, with an increase in the load, gasoline consumption can increase. The recommended oil grade is SAE 30.

User manual

Recommendations for the use of Texas motor cultivators are similar to the rules for the operation of other similar units, they are detailed in the instructions for each instance of the cultivator, we outline the basic requirements:

• You should thoroughly study the instructions and specific features of the model, its technical characteristics, in particular the methods of emergency stopping the machine.
• The use of the cultivator for work that is not provided for by the instructions is excluded, the excess of the maximum loads.
• It is forbidden to operate the cultivator for persons under 16 years of age, persons who are not familiar with the instructions, who are in a sickly state, or alcoholic intoxication.
• During work, it is necessary to maintain a safe distance of 20 m from nearby people, animals, property.
• Before each use, a thorough inspection of the equipment should be carried out.
• Perform preventive maintenance as scheduled.

Major malfunctions

The most common cultivator engine breakdowns and gearbox problems. Engine problems (won't start) can occur due to clogged air filter, muffler, carburetor contamination, and spark plug combustion.

Noises in the gearbox occur due to lack of oil, oil leakage - in this case, the oil seals will need to be replaced.

Significant vibration of the cultivator can be caused by improper installation of attachments. If the cutters stop turning, the clutch cable may not be adjusted or the fasteners are loose.

The key to the durability of any equipment is its correct operation. To extend the life of your assistant, to avoid breakdowns, you should adhere to certain rules:

It is necessary to make sure that the cultivated area is not littered with stones, metal objects, pieces of brick.
Care should be taken when working near trees to avoid entangling the cutters in the roots. It is impossible to loosen the ground after cutting down, the knives will surely break on the roots.
A proven prevention method is the constant presence of a small amount of gasoline in the fuel tank, this will help to avoid rust and condensation.
In the event of malfunctions in the cultivator's automation, it is highly discouraged to troubleshoot on your own, it is wiser to use the services of specialized centers.

Model range of the cultivator "Texas"

The range of Texas cultivators consists of several lines:

• The Mini line is designed for small areas, greenhouses and greenhouses, including the Tex 204R cultivator.
• The El-Tex line of light electric cultivators is available in 740, 1400 and 2000 watt models. These machines are intended for prepared land only, plowing of virgin lands is prohibited.
• The Texas Hobby cultivator is presented in three medium models: 380 TG, 500 TGR, 600 BR. They differ in the installed engine, the 380 and 500 models have a 2600 watt power unit, and the six hundredth one - 4100.
• The LX line is designed for heavy soils, the 550TG has a 3600 kW motor.
• The TX line is also not afraid of difficult soils on large areas. The TX 601B and 601 TG models differ in engines, and the TX 602 unit - in the steering device.
• Even a woman can handle the lightweight, but without loss of functionality, the Lilly series cultivator. Models 572 B, 530 TG, 532 TG, 534 TG are equipped with a powerful enough engine for work on difficult ground.
• The Futura line, which includes the 6003 V and 6003 TG models, is hard at work over large areas with a 4100 watt motor.
• The Fusion line is practically mini-tractors - heavy, productive agricultural machines.

Cultivator "Texas"

The lineup

Moto cultivators of the Texas brand are distinguished by their high reliability in operation, recognizable by their original design. The owners emphasize the extraordinary ergonomics of the models, ease of use. Moto cultivators Texas are distinguished by a number of design and technological features:

• The cultivator control options are placed on the ergonomically shaped steering wheel.
• Due to the reduction in the weight of the rear console, the weight distribution is significantly improved, and the weight of the machine is reduced.
• By placing the engine above the cutters, the Texas cultivator has achieved exceptional stability.
• Due to the specific design of the frame, the center of gravity is lowered, and maneuverability is improved.
• A protective front bumper protects the engine from damage.
• A useful function is processing at low rotational speeds of the milling cutters, which reduces the damage caused to the humus layer of the soil.

El-Tex series

Texas cultivators of this series are equipped with electric motors, which saves on fuel, however, due to their low power (1.0-2.7 hp), these models should not be used on untreated soil.

Motor-cultivator Texas El-Tex 750 in operation:

Hobby Series

Compact small-sized modifications of motor-cultivators are designed for operation in confined spaces, greenhouses, and other enclosed spaces, for processing row spacings.

In this series, the most popular models of gasoline cultivators Texas 500BR, Texas 500B, Texas 500 TGR, which are almost identical, differ slightly from each other - with a capacity of 2.3-2.6 kW (up to 3.5 hp). and the brand of the engine. The weight of the machines is 41-45 kg, the soil cultivation parameters are: width 50 cm, depth 33 cm.

The Texas Hobby 600BR cultivator is powered by a Briggs & Stratton 650E Series engine with a power of 3.55 HP, the weight of the cultivator is 45 kg.

Operating instructions - download.

The video shows how the Texas Hobby 500 TG cultivator works successfully even on difficult ground:

The features of the 10TGVario model are described in the video:

TX series

The most common model in the series is the Texas TX601B cultivator with a 5.5 hp Briggs & Stratton (USA) engine with adjustable working width. Due to its impeccable performance, this modification has consistently received favorable reviews from the owners.

The Texas TX602 motor-cultivator, unlike the TX601 version, has some technological improvements and is more expensive.

Letter markings in various models of Texas cultivators (B) and (TG) mean equipping machines with engines of different brands - Briggs & Stratton and Powerline, respectively.

Technical characteristics of the Texas TX601B cultivator:

Lilli series

Some cultivators with special characteristics that bring them closer to walk-behind tractors are of interest to users. The Texas Lilli 534TG motor cultivator with a power of 5.71 hp, according to the owners, is distinguished by high productivity, good maneuverability, adjustable tillage width of 36-57-85 cm at a depth of 33 cm.

The Texas Lilli 532 TG 500/620 features a 5 hp Powerline engine.

Operating instructions for motor cultivators Texas Lilli 532/534/535 - download.

Features and Benefits

The Texas walk-behind tractor is a Danish-made garden unit, its main advantages are high-quality assembly, reliable operation, and versatility. The manufacturer does not stop at modernizing its products, so the units meet all modern requirements. The product from the European brand has won a lot of good reviews over the years, and today it is in good demand.

The positive characteristics of Texas mini-tractors include the following:

• equipment with reinforced cutters, these elements help in work on the most difficult soil, as well as areas that have compacted lumps;
• the ability to function without stopping for a long time, as well as the ability to perform various operations in areas with large dimensions;
• availability of purchasing spare parts in case of unit breakdown;
• a high level of performance, which is achieved by the presence of a powerful motor;
• economical fuel consumption;
• low price for a walk-behind tractor, while the machines are characterized by excellent quality;
• the presence of a chain drive, reverse gear ensure good maneuverability of the unit.

The design of Texas mini tractors has the following characteristics:

• the shape of the steering wheel is comfortable, which makes it easy to control standard operations;
• the strength of the front bumper protects the motor from mechanical influences;
• the weight of the motoblocks is low, due to the simplified design of the rear console;
• each of the cars is equipped with wheels that have an aggressive tread, thanks to which the equipment can overcome various obstacles;
• the transport frame has a simplified sample, so it is not difficult to operate the "assistant";
• the placement of the engine over the cutters ensures the stability of the equipment, its excellent balance.

How to use?

The Texas technique is pretty easy to use. Before starting the engine, you must carefully study the instructions. Do not use the machine in an area that is prohibited by the instructions. The area to be processed must be examined for the presence of foreign objects, they must in no case fall under the cutters. The technician needs regular inspection of the condition, adjustment of connections and tightening of bolts. Do not forget about changing the oil in the gearbox.

You need to use walk-behind tractors exclusively during the day. Repair work should be carried out with the engine off and stopped machine parts. Breakdowns of motoblocks can occur for the following reasons:

• the cultivated area is littered with debris and stones;
• when working near trees;
• in case of failure of parts.

In order to avoid unforeseen breakdowns, it is worth carrying out preventive measures, as well as preparing the equipment for operation. To do this, the unit must run idle for some time, and then it should be tested on light soil. And also an important measure is the control over the presence of fuel in the tank. This procedure will eliminate the occurrence of rust, as well as condensation.

The lineup

The company produces walk-behind tractors in several model lines, each of which differs in such criteria as weight, performance and functionality.The consumer is provided with a wide selection of equipment with various characteristics, among which it is easy to choose the best option for processing areas with one type of soil or another.

Texas hobby

The Texas Hobby 500 motor cultivator belongs to the category of equipment designed for processing small areas with light and medium soil. Low toxicity of the exhaust makes it possible to use the technology in greenhouses. The products are lightweight and easy to handle. Thanks to this, the technique is popular among retirees and women.

Cultivator Texas Hobby 300 at weighing 28 kg develops power 2.7 h.p. The unit is able to loosen the soil 20 cm in depth with a working width of 38 cm. The folding handle makes it possible to transport the product in a small bag or on the trunk of a bicycle.

The Texas 500 cultivator is more productive due to the installation of a powerful 4.8 hp gasoline engine. The cutters sink 33 cm into the ground with a 55 cm strip width. The fuel tank has a capacity of 1.5 liters. A full refueling lasts for 2 hours of continuous operation.

The Texas TX601TG is powered by a 5.0 hp, 196 cc four-stroke petrol engine. Loosening is carried out in a strip of 85 cm at a depth of 33 cm. The Texas 601, 602 and 650 cultivator is designed to work with heavy soil and uplift virgin lands. The product is distinguished by its endurance and high performance.

The Texas Hobby LX 550TG cultivator is designed for use in the most difficult conditions, where light models will prove useless. With an engine power of 5.5 hp the unit captures a strip of soil 55 cm to a depth of 35 cm.

Texas El-Tex

This line of equipment is represented by light electrical products operating on 220 V.

The more powerful model 2700 weighs 32 kg at 2.7 kW. The unit is capable of gripping a strip of 45 cm with a cutters immersion of 26 cm. With a long cable, the technique can handle small fields.

Texas fusion

The range is represented by powerful machines for working with heavy soil.

The Texas Fusion 10TG Vario is powered by a 6.0hp gasoline engine. with a volume of 210 cm³ and a belt drive. The equipment is capable of capturing a strip of land up to 90 cm to a depth of 39 cm. The presence of the bracket allows the unit to be completed with all types of attachments.

Model 10BVario with 5.2 hp carburetor engine. weighs 91 kg, air-cooled and worm gear. The walk-behind tractor is able to cope with any type of soil, including virgin soil.

Texas TX

The series is represented by powerful machines designed for the processing of large areas with heavy soil. The machines are wheel-driven and have a high cross-country ability.

The TX 601V model is equipped with a 5.2 hp engine. volume of 196 cm³. The walk-behind tractor is equipped with a chain reducer and a gear drive. The cutters cover a strip up to 80 cm at a depth of 33 cm.

The 601TG is equipped with a 5.5 hp carburetor engine. and a working volume of 202 cm³. The technique has a chain reducer and a gear drive. The cutters cover strips up to 85 cm at a depth of 38 cm.

Texas lilli

The line consists of machines of the middle weight category with power plants of increased power.

The most popular among farmers is the Texas Lilli 532TG walk-behind tractor. The product weighing 48 kg is equipped with a 5.5 hp motor. with a working volume of 190 cm³. The Texas 532 model can be used both for processing lawns and garden beds in the yard of the house, and for raising virgin lands. The chain reducer provides forward and reverse travel in one gear. The machine loosens the soil to a depth of 33 cm, capturing a strip of up to 80 cm

The Lilli 534TG product is distinguished by its high weight and the presence of a 7.0 hp power plant. Thanks to this, it can be used in conjunction with all types of trailed equipment.

Operation and maintenance

Running in

To extend the life of your Texas cultivator, to reduce breakdowns and downtime, the first step is to run the machine in. At the beginning of the running-in procedure, the engine should idle, then gradually start to work in a gentle mode - up to 50% of the load for 10-13 hours, it is allowed to perform various types of soil cultivation.

At the stage of running-in, the main units and mechanisms of the machine are run-in, therefore, attention should be paid to their functioning: the clarity of gear shifting, the condition of the moving parts of the structure, chassis, wheels, the presence of noise. At the end of the running-in, change the oil, once again carry out a technical inspection of the cultivator

Fuel, oil

Gasoline cultivators in Texas consume unleaded AI-92 gasoline, the fuel consumption is quite economical - 1 l / h, with an increase in the load, gasoline consumption can increase. The recommended oil grade is SAE 30.

User manual

• You should thoroughly study the instructions and specific features of the model, its technical characteristics, in particular the methods of emergency stopping the machine.
• The use of the cultivator for work that is not provided for by the instructions is excluded, the excess of the maximum loads.
• It is forbidden to operate the cultivator for persons under 16 years of age, persons who are not familiar with the instructions, who are in a sickly state, or alcoholic intoxication.
• During work, it is necessary to maintain a safe distance of 20 m from nearby people, animals, property.
• Before each use, a thorough inspection of the equipment should be carried out.
• Perform preventive maintenance as scheduled.

Major malfunctions

The most common cultivator engine breakdowns and gearbox problems. Engine problems (won't start) can occur due to clogged air filter, muffler, carburetor contamination, and spark plug combustion.

Noises in the gearbox occur due to lack of oil, oil leakage - in this case, the oil seals will need to be replaced.

Significant vibration of the cultivator can be caused by improper installation of attachments. If the cutters stop turning, the clutch cable may not be adjusted or the fasteners are loose.

The key to the durability of any equipment is its correct operation. To extend the life of your assistant, to avoid breakdowns, you should adhere to certain rules:

It is necessary to make sure that the cultivated area is not littered with stones, metal objects, pieces of brick.
Care should be taken when working near trees to avoid entangling the cutters in the roots. It is impossible to loosen the ground after cutting down, the knives will surely break on the roots.
A proven prevention method is the constant presence of a small amount of gasoline in the fuel tank, this will help to avoid rust and condensation.
In the event of malfunctions of the cultivator's automation, it is highly discouraged to troubleshoot on your own, it is wiser to use the services of specialized centers .. Motoblock Texas is produced in Denmark, and is used all over the world

It is more convenient to process a garden or vegetable garden with high-quality equipment for performing various works, which the Texas motor-cultivator does an excellent job. It is easy to operate, store and repair

Motoblock Texas is produced in Denmark and used all over the world. It is more convenient to process a garden or vegetable garden with high-quality equipment for performing various works, which the Texas motor-cultivator does an excellent job. It is easy to operate, store and repair.

The unit breaks down very rarely, but even if it does, it will not be difficult to find parts for a particular model.
Attachments for hilling beds or harvesting crops are available in a large assortment of agricultural equipment stores. Parts, lubricants and auxiliary tools for the Texas cultivator are worth buying from certified centers. You can repair the equipment yourself or contact a specialist.

Device

The Texas cultivator device includes several main working units.The design uses a 4-stroke gasoline engine with different power, depending on the series and model of the unit. In fact, it is the main structural element that shapes the further work of the entire cultivator.

However, there are other nodes that deserve our attention:

• Frame construction. In these cultivators, the frame serves not only as a connecting link for all other working units, but also plays a decorative role. All elements of the case are made of very high quality, in accordance with the best European quality standards.
• Cutting cutters. Depending on the model, the unit can be equipped with a different number of cutters and different diameters.

• Wheelbase. In this case, the wheels perform exclusively a transport role and are located mainly at the rear of the structure.
• Control handle. This is where the main controls, clutch and other levers and buttons are located.

Some models provide for the installation of additional equipment. The Texas cultivator, attachments to which must be purchased separately, can perform many additional work that became possible precisely thanks to these attachments.

Various plows, hillers, potato planters - all this allows you to use this device to the fullest, from preparatory land work to harvesting.

The main design features of Texas cultivators can be distinguished:

• The design of the steering wheel is very convenient, because it contains the main controls, speed switches, etc.
• The rear of the unit has been lightened to significantly reduce the overall weight of the unit.
• The convenient location of the engine - above the cutters, allows the cultivator to be very stable on the ground, which directly affects the ease of control.
• The engine of the device is protected by a special bumper that prevents various elements from entering the engine.

Attachments

Due to the presence of attachments, Texas walk-behind tractors are used in agriculture, harvesting. You can add the following devices to this technique:

• set for hilling beds;
• dump for cleaning snow cover in the winter season;
• potato digger;
• a plow for plowing a land plot;
• a scraper that removes weeds;
• aerator;
• trailed cart.

These types of attachments can be purchased separately from the walk-behind tractor. Texas appliances have enough engine power to function with these attachments. Additional equipment contributes to increasing the functionality and productivity of machines, as well as an indispensable aid in the processing of virgin soil and soils with a wide variety of difficulties.

Motoblocks Texas combine reliability and European quality. This equipment is bought not only by individuals, but also by large farms. The assortment of goods includes both budget units and expensive options.

For an overview of the Texas TG620 POWER LINE walk-behind tractor, see the video below.

Motoblock Texas is produced in Denmark and used all over the world. It is more convenient to process a garden or vegetable garden with high-quality equipment for performing various works, which the Texas motor-cultivator does an excellent job. It is easy to operate, store and repair.

The unit breaks down very rarely, but even if it does, it will not be difficult to find parts for a particular model. Attachments for hilling beds or harvesting crops are available in a large assortment of agricultural equipment stores. Parts, lubricants and auxiliary tools for the Texas cultivator are worth buying from certified centers. You can repair the equipment yourself or contact a specialist.

Gearbox problems

You will need to repair the cultivator gearbox if its operation is accompanied by increased noise. A similar phenomenon is typical in the case of a lack of oil.Add it to the gearbox of the device, or better, replace it altogether.

Also, noise can arise due to the "loosening" of the fasteners of the nodes: inspect and fix them with your own hands.

In addition, summer residents may face the problem of oil leakage from the gearbox. This can occur due to wear or improper installation of the seals of the bearing units, with poorly fixed covers and deformation of their accompanying gaskets. Replacement and subsequent high-quality installation of oil seals, self-replacement of gaskets and fixing of cover fasteners, as well as high-quality cleaning of the breather will help to eliminate such a leak.

Do not forget to timely change those parts of the Texas gearbox that are more susceptible to wear than others during the operation of equipment of this kind.