How to make transparent slime: 7 DIY recipes at home

Slime recipes at home

There are many recipes for making slime using glue at home. The most popular of these are recipes with boric acid and sodium tetraborate.

Boric acid based stationery glue

To prepare this slime, you will need the following ingredients:

half a glass of transparent office glue;
a glass of hot water;
2 tbsp. l. water at room temperature;
0.5 tbsp. l. boric acid.

When all the components for making a transparent slime are ready, you can start working:

Dissolve boric acid with hot water in a bowl. Stir until the water is completely clear. The container with the prepared boric acid solution can be set aside for a while.
Pour the glue into a separate bowl, and then add 1 tbsp. l. water and mix thoroughly.
Add 3 tbsp. To the mixture. l. boric acid and mix everything well again. By that time, the slime should already begin to thicken.
Now you can start stirring the slime not with a spoon, but with your hands

If the mass sticks to your hands, then a boric acid solution should be added, however, it is important to remember that no more than 1 tbsp can be driven in at a time. l., otherwise the slime will immediately become solid

If the toy is too dense, then you need to add a little more glue.
The slime is ready in the event that it easily wrinkles, stretches, is pleasant to the touch, does not roll and does not stick to the hands.

With sodium tetraborate

In this recipe, a clear slime is created using glue, sodium tetraborate, and water. Making a slime at home is a fairly simple process, but in order for the toy to turn out to be correct, you need to carefully follow the instructions and observe all the necessary proportions.

In a bowl, you need to collect 50 ml of warm water and 100 ml of any of the above glue options. Mix the components well until smooth.
Next, a 4% sodium tetraborate solution must be added to the resulting mixture. If it is not available, then you can prepare the solution yourself - pour 1 tbsp into half a glass of water. l. borax powder and mix thoroughly until it is completely dissolved.
The resulting solution is added to a mixture of water and glue and again thoroughly mixed until a homogeneous mass is achieved.

That's it, the slime is ready and now you can enjoy playing with the resulting elastic viscous mass.

With sequins

You can make an unusual glitter slime by preparing liquid starch and glue (silicate or PVA) for the base. For work you will need:

starch for washing clothes - 150 ml;
glue - 50 ml;
glitter and dye;
mixing container and tool.

Step-by-step instruction:

Mix starch and glue. Bring to a homogeneous consistency and leave to brew for 5 minutes.
Add dye and glitter.
Unfold the cling film on the table, put the sticky mass on it.
Wrap the slime in plastic and knead vigorously. After 5 minutes, the product will be ready.

Soda Slime Recipes

Several methods of making slime with the addition of baking soda have become widespread. The methods involve the use of improvised means and allow you to make a slime in a short time.

With glue

PVA glue is mixed with a small amount of water to liquefy and dye is added. In a separate container, mix soda with water. Then both masses are mixed with each other and stirred until a homogeneous consistency is obtained. For convenience, you can place the mixture in a bag, tie and shake vigorously to thicken.

With salt

In addition to salt and soda, the recipe provides for the use of shampoo or liquid soap.A little salt is added to the detergent, constantly stirring the ingredients. Then add soda and continue stirring until the mass becomes stringy. The resulting mass is kept for a couple of hours in the refrigerator.

Sodium tetraborate with glycerin

This method of making slime is not particularly complicated and requires several steps to be performed sequentially. In particular, you need:

Heat water slightly in a saucepan and dissolve sodium tetraborate in it.
Add a couple of drops of glycerin to the solution and pour a quarter of the resulting mixture into a separate container.
Gradually pour in PVA glue and mix the components, adding the remaining aqueous solution in portions.
Add dye to add color to the slime. This must be done until the consistency thickens.
Place the finished product on the refrigerator and wait a couple of hours for the slime to become harder and retain its shape longer.

Features of salt slimes

Salt slime is one of the best home-made options. Such a toy is distinguished not only by its simplicity of creation, but also by its absolute safety. The baby himself can take part in the fascinating process of creation, since an open flame is not required here. Salt in this case acts as a thickener that allows the slime to keep its original shape. Additional components in the composition must be hypoallergenic and harmless to health.

3> How to choose ingredients

A properly prepared slime has a texture that stretches easily and spreads, but does not stick to the palms. For it, you need to choose the highest quality and safe ingredients. Sodium chloride is used as a binder, that is, ordinary food salt

It is important to add enough of it according to the recipe.

One of the main components of a DIY slime is glue. Several options can be used depending on the desired result. Silicate glue, or liquid glass, is used to create a transparent slime texture. Glue "Titan" on the basis of an aqueous alkaline solution of sodium and potassium silicate has proven itself well in this regard. PVA glue based on an aqueous polymer emulsion - for matte

It is important that the glue is fresh, as its elasticity decreases with a long shelf life.

To make a slime, you need to have the following tools on hand:

a deep bowl or plate;
a stick or spoon for mixing ingredients;
several small bowls for mixing various components.

Tips & Tricks

You need to take note of a few recommendations for using the slime:

You can store the toy in a plastic bag (preferably with a plastic fastener), as well as in a plastic food container with a tight sealed lid.
High air temperatures contribute to the loss of elasticity and spreading of the slime. To avoid this, you should store a container with an unusual toy in the refrigerator, on the side door shelves. But the freezer cannot be used for these purposes, since the slime will be covered with ice, freeze and wrinkle. The optimum storage temperature is 5-10 degrees Celsius.
To preserve the original properties of the slime, it is imperative to use it for warm-up at least every three days.
To clean the jelly-like mass from dirt, you need to rinse it in a bowl filled with warm water. To get rid of dust, you can use a medical syringe - remove the needle from it, attach the nozzle to the place of dust accumulation and draw in air.
If the slime is made using glue, detergent, or sodium tetraborate, you should wash your hands with soap and water after each warm-up. In no case should a child take such a toy into his mouth.
Slime should not be placed in sand or on fleecy carpet surfaces.

Share link:

How to make edible slime

Other ingredients are used to create an edible slime. You can add various sweets and other ingredients if desired. Making an edible slime has a number of advantages, including the following:

accidentally swallowing the product, the child will not harm his health;
to create a toy, you do not need to buy special components;
at any time, the slime can be eaten, and not thrown away.

Marshmallow

The marshmallows are placed in a small saucepan and melted. The resulting mass is thoroughly mixed and allowed to cool, after which the slime is ready.

Gummy candy

Due to their viscous consistency, gummy gummies are suitable for making slime. It is enough to melt the sweets in a water bath and wait for the melted mass to cool. As it hardens, you can give the product the desired shape.

From "Nutella"

To make a slime from Nutella chocolate paste, you first need to melt the marshmallows, and then add the paste itself. The mixture is thoroughly mixed for 5 minutes to obtain the desired consistency.

Butter Slime

The name of the slime butter is due to its ability to spread easily. This variety is no longer edible, because for the manufacture you need to mix glue, starch, thickener, shampoo and body lotion or cream.

Crisp

An unusual variety of slimes is the crunchy version. To create it you need:

pour glue into a container, add soda and mix thoroughly;
add water and stir again until smooth;
add thickener and dye, mix again and wait for complete thickening;
leave the slime for 4-6 hours in a cool place.

The easiest recipe

The basic slime recipe is extremely simple. Glue, salt and water are mixed in a container, after which the resulting mass is kneaded with hands. Dye can be added to add color if desired.

In custody

As you noticed, slime can be made in many different ways. And they all differ from each other and have their own characteristics and properties, be they transparent, luminous, magnetic or even edible handgams.

If desired, glitter or mother-of-pearl can be added to your slime. Or add essential oils to make it aromatic. It is possible to mix the slime with foam balls. In general, there are many ways to make your slime unique.

We also want to remind you that it is advisable to store the slime in a container with a sealed lid. And if it has dried up, then the dried mass can be put into water for a short time, and it will become soft there again.

Do not forget to involve your children in the process of creating a slime, for them this is a real scientific quest. Just remember about safety precautions. If using a spray, keep the room well ventilated.

And do not forget that the slime can leave stains that are quite difficult to remove.

Basic recipes

It is advisable to start making clear slime for children not alone, but with adults

Attention should be paid to the ingredients used in the recipe. If you need borax as a thickener, then you should follow the safety rules when in contact with it.

It is impossible for the substance to get on the mucous membranes of the mouth, nose. After all, this can cause irritation of the mucous membranes.

Liquid starch instead of sodium tetraborate

Starch is used as a thickener for slime. But it must be diluted with water. Dry, it will not bond well together with the glue, and you will get a mass with lumps inside. Now you need to mix a quarter of a glass of silicate glue or "Titan" brand with liquid starch taken in the same amount. To get a liquid crystal slime, you need to stir for a long time, first with a stick, and then with your hands.

Borax, glue and water

Most often, sodium tetraborate is needed to make transparent and colored slimes. It consists of boric acid salts, polysaccharides. The substance is not toxic, but when borax is consumed in large quantities inside, pathology of the digestive system can develop. Therefore, it is advised not to give slime toys to young children, as they taste everything.

For the recipe, take borax powder and dilute it in warm water. For half a glass of water - a spoonful of thickener. Separately mix 100 grams of glue with 50 ml of slightly warmed water. Now connect both parts and start kneading. It lasts until the toy becomes elastic and begins to lag behind the walls of the dishes. You need to make a toy only with adults.

With salt and shampoo

One of the simplest ways to make slime is to take only shampoo and table salt. It is better to take shampoo with a thick consistency. Add salt gradually, starting with a pinch. The process will be slow. Only constant and persistent stirring with the addition of salt will lead to the formation of a ball of gel-like consistency.

From shampoo and toothpaste

To make a slime, you need shampoo or liquid soap. Toothpaste is taken 2 times more. We also need a solution prepared from a teaspoon of salt in a glass of water. The cooking sequence is as follows:

Combine shampoo and paste and mix for a long time.
When the substance becomes viscous, salt water is poured on top to hide the slime.
Cover the top of the container with a tight lid or cling film.
Put in the refrigerator for 1-2 hours.
All are mixed.

Now you can play with the slime. If the mass dries up, it is reanimated with a salt solution.

With boric acid

Boric acid is part of the borax thickener, so it is also used in the production of clear slimes. Take half a glass of acid and silicate glue. Dilute everything with warm water separately. Just 1 glass is enough. Stir the components of the toy for a long time until it becomes elastic.

Boric acid free

Follow the sequence in the manufacture of slime:

Pour 6 grams of baking soda into hot water and stir until dissolved.
Pour 100 ml of glue into a bowl, better than silicate glue, 2 tablespoons of water at room temperature there.
Pour in salt solution.
After vigorous stirring, pour in the soda solution.

The total amount of hot water should go within 1 glass. You need to stir with your hands as long as possible.

Mirrored

A cool translucent slime is obtained when the ingredients are mixed in a bag. First it will be starch with water, and then silicate glue. If it is necessary for the product to turn out to be dense, then more starch thickener is needed. Reflection in the slime, like in a mirror, will work if you make the layer below painted in dark tones. It will be possible to play with an elastic mirror.