Starch slime without glue

Popular recipes

When making homemade slimes from flour, use the simple recipes described below.

With water, without PVA glue and sodium tetraborate

The simplest flour slime, without the use of additives, is made as follows:

1. Pour 200 grams of sifted flour into a shallow glass plate.
2. 25-30 grams of cold boiled water is poured into the flour, constantly stirring the resulting paste, to prevent the formation of lumps.
3. Following cold water, add the same amount of hot water, remembering to stir the resulting viscous mass.
4. A few drops of food coloring are added to the mass that did not have time to thicken, stirring evenly with it.
5. Until complete thickening and cooling, the mass is placed in a refrigerator.

When the slime thickens well and cools down, it is taken out of the refrigerator and thoroughly kneaded with your hands.

With soap and toothpaste

You can simply and quickly make a slime from flour and a mixture of toothpaste with liquid soap according to the following recipe:

1. Liquid soap and toothpaste are placed in a small container in equal amounts.
2. A few drops of bright dye are added.
3. With constant stirring of the components, a small amount of flour is added to the resulting mass.

The resulting slime is taken out of the container and thoroughly kneaded by hands, thereby achieving the necessary softness.

With shampoo

The process of making slime from flour and shampoo consists of the following manipulations:

1. Shampoo and liquid hydrogen peroxide in proportions of 2: 1 are poured into a shallow container.
2. The components are actively mixed until a foamy mixture is obtained.
3. The resulting mixture is placed in a freezer for 3-4 minutes.
4. Take out the mixture from their freezer and begin to add flour to it with constant stirring.
5. Knead the resulting slime and place in an airtight container with a tight-fitting lid.
6. Place a container with a lid closed with a lid in a dark and cool place for a day.
7. Take out the slime and, adding a little sunflower oil, knead it with your fingers.

Slime made according to this recipe will be quite durable, stringy and soft.

Mint

In order to make a mint turquoise slime, resort to the recipe described above with soap and toothpaste. In this case, a marker or diamond green is used as a dye. Toothpaste is selected with a pronounced mint taste.

The most budgetary

The most budget slime is made from flour according to the following recipe:

1. 250-300 grams of sifted flour are poured into a small container.
2. While stirring constantly, warm water is added to the flour.
3. The resulting mixture is placed in a refrigerator until it is completely thickened.
4. After the slime thickens, take it out of the container and knead it thoroughly with your hands.

A slime made according to this recipe will have a neutral cream color and will cost a small amount.

Elastic

The most flexible flour slime can be made by following the recipe described above using shampoo and liquid hydrogen peroxide.

Why use thickeners and what are

The consistency of the slime depends on the shape of the thickener:

• eye drops;
• borax or borax (sodium tetrobarate);
• contact lens cleaning compound;
• a drug containing alcohol or salicylic acid;
• washing gel;
• air freshener;
• soda or salt;
• hair fixation spray;
• powdered sugar;
• starch;
• dishwashing liquid;
• gelatin.

Each of the listed funds has its own characteristics and characteristics.

Saline

Sodium tetraborate, aka borox or borax, and other salt-containing substances are the most effective thickeners that firmly hold the slime together through chemical reactions. The selected components are first thoroughly mixed, then one of the saline agents is added dropwise to them.

Soapy

If sodium tetraborate is not available, a laundry gel or detergent can be used. The process of creating such a toy does not take much time and it turns out thick and beautiful.

Sprays

Some people thicken the slime with an air freshener or strong hold hairspray. These are very "capricious" products that do not always allow you to achieve the desired consistency. Experienced slime makers recommend choosing thickeners from baking soda or salt.

Soda

Suitable for most recipes, like sodium tetraborate or salt. Soda is used in the form of a solution or powder - you need to mix one part of it with three parts of water. Soda gives the product good density and ductility.

Gelatin

It is not a universal product and only works under certain conditions. To make a toy, gelatin is soaked in water for 40 minutes. While it swells, knead the bulk of the other components.

The soaked gelatin is heated over low heat, stirring constantly until completely dissolved, then cooled and added to the rest of the ingredients.

Sugar

It is better to use not sand, but powdered sugar diluted with liquid soap or shampoo. Edible slimes are made from the same thickener, of course, without chemical components.

Video

In addition to recipes in text form, today on the Internet you can find many detailed video tutorials on this topic. They show in detail which ingredients and in what quantity are mixed with each other.

Starch and shampoo slime:

Shampoo and salt slime without glue:

2 slimes without glue:

Slimes from 2 ingredients without glue:

It is advisable to store homemade slimes in boxes with lids. You can use empty store-bought slime containers. Hermetic plastic bags are also suitable. Such homemade toys retain their original appearance for 4-5 days. It is recommended to play them on a clean, smooth surface.

With shower gel

This slime consists of two bases - one based on glue, the other on starch. The second should be elastic, but not sticky. If everything is done according to the recipe, an unusual slime butter will come out.

Simple recipe

• 85 ml PVA glue,
• 1 tsp body lotion,
• 5-5 drops of liquid food pigment,
• 3 tbsp. l. shower gel,
• 4 tbsp. l. + 3 tbsp. l. starch
• 0.5-1 tsp sodium tetraborate diluted with water.

Making slime at home

1. For the first base, you need to move the glue into a deep container.
2. A creamy lotion is added to it.
3. The liquid should be supplemented with dye.
4. Now it's time to stir it to make the mixture smooth.
5. Shower gel is poured into another container.
6. Most of the starch is poured there in parts.
7. The components must be connected so that a soft mass is obtained, similar to light plasticine.
8. It is divided into pieces and added to the dishes with glue.
9. Mix both bases until smooth.
10. An important ingredient is sodium tetraborate diluted with water.
11. The mass must still be stirred so that it becomes thicker.
12. The remaining starch is sent there in portions.
13. It is necessary to mix everything between its additions.
14. In the final, the slime is kneaded with hands.

We recommend reading about how to make lizun from starch. From the article you will learn about 17 simple slime recipes from starch and PVA glue, shampoo, water, sodium tetraborate, soap, shaving foam and other available components.

And here is more about how to make a slime out of glue.

Used in combination with glue, starch gives slimes special softness, fluffiness, but does not interfere with flow.

It is very important not to add too much free-flowing component in order to make the mass even more pleasant to the touch. Otherwise, the slime will dry out quickly.

Be sure to watch the video on how to make a fire butter slime from shower gel, glue and starch:

Making from starch and glue

A toy for hands based on starch and PVA glue will last longer and will be practical to play. As a dye, you can take not only food additives, but also gouache.Starch is required for this recipe liquid. If this is not the case, then you need to dilute the powder with water in a 1: 2 ratio, wait for the swelling. When buying PVA glue, it is advisable to choose the freshest one, focusing on the production date.

In a bowl, mix 70 ml of liquid starch and 25 ml of glue, leave to brew for 5 minutes. Add a few drops of dye, mix again and leave to infuse. Spread cling film on the table. If there is a desire to add sparkles to the toy, then you need to pour them onto the film.

Remove the viscous mass from the dishes, put on a film, wrap the edges on all sides. Knead the mass in the film for several minutes, thoroughly mixing all the components. Then remove the film and wrinkle it for some time in your hands. By this time, the consistency will be ready.

Can be made without thickener?

There are several ways to make slime, in which you can not use starch and a special thickener. In this case, the question arises as to how you can replace these ingredients. One of the ways is the shampoo slime recipe described above.

There is another version of the shampoo slime recipe. But in this case, you can use toothpaste instead of soap. Necessary:

1. Mix 4 tablespoons of shampoo with 1 teaspoon of toothpaste.
2. In order to give the slime color, you can add 5 drops of dye. As a result, you should get a homogeneous dense mass.
3. The finished slime must be kept in the freezer for an hour and stored between games in a container with a lid in the refrigerator.

You can make toy slime without thickener and starch using one more recipe. This requires liquid soap, sugar, and jewelry. In a small container, you need to mix all the components:

• 5 tablespoons of liquid soap;
• 3 tablespoons of granulated sugar.

For decoration, you can use dye or glitter.

After stirring sugar and soap until smooth, it should be put in the refrigerator for a day. If the mass turns out to be too liquid, you need to add sugar, and vice versa, if the mass is too thick, dilute with shampoo.

There is also a similar recipe. Only salt can be used instead of sugar:

1. Liquid soap and salt are thoroughly mixed in the same amount (about 3 tablespoons each) in a small container for 5 minutes.
2. The resulting mixture must be removed for half an hour in the refrigerator. Do not freeze.

After cooling, the toy is ready for use. Of course, this will not turn out to be the same slime as sold in the store, but something similar - mucus of medium liquid and density.

How to choose starch for slime?

First, you need to figure out whether starch and water are really suitable as basic components for slime. Starch is essentially a natural polymer. The molecule structure of the product is a chain of compounds with tails of alpha glucose. The polymer molecular sieve, as the experimental slimers know, is an excellent basis for creating an elastic mass.

However, in the case of starch, if you add activators known to you (sodium tetraborate, borax, Naphthyzin and others) to the product, the polymer chain of the molecule will not "get entangled", that is, the elastic mass we need will not be formed. But one has only to add water to the product, and in the process of hydrolysis, the starch grains swell, and a thickened mass called paste forms in the working container. Thus, a slime from starch and water is really possible, but the starch itself acts as a thickener, and not other activators. The main thing is to choose the right proportions of the ingredients.

On an industrial scale, starch is obtained from potatoes and corn, but rice, wheat, and barley can also be used as raw materials for the product. The water-starch paste will differ in each case. So, potato paste is transparent, corn paste has a milky white hue, and wheat paste is translucent. The hygroscopic properties also differ, that is, the possibilities of water absorption.Potato starch reacts fairly quickly with warm water, but it takes longer for the rice product.

Thus, for those who are interested in the question of how to make slime from starch and water, it is best to use a product obtained from potatoes, and only then switch to other raw materials in their experiments. But if you find a proven recipe that indicates a specific type of starch and the proportions of its combination with water, it is better not to deviate from the author's idea. Most likely, the creator of such a slime checked exactly these components.

Note! Starch will not work with cold water. To create a slime from starch and water, you need to take a hot liquid .. The property of starch to swell from water is actively used in slime

A food product can be both a key ingredient and an auxiliary. However, in order for the component to work in the composition, you need to know a few secrets:

The property of starch to swell from water is actively used in sliding. A food product can be both a key ingredient and an auxiliary. However, in order for the component to work in the composition, you need to know a few secrets:

• The process of hydrolysis (interaction with water) begins only when the temperature rises. It makes no sense to add starch to a cold composition and hope for a quick result.
• In order for the so-called starch grains to swell, to form a paste, it takes time, so after adding the component to the slime from starch and water, wait a little, let the components work together.
• With an excessive amount of water, it will not work to achieve the desired texture, therefore, water is added to the dry mixture in small portions. After each introduction of water, the composition should be mixed well and allowed to brew for several minutes.
• Starch can be used not only as the main thickener, but also as an auxiliary, thickening the texture of the finished slime.

The disadvantages of this ingredient include the relative fragility of antistress agents. Even if the toy is stored in accordance with the rules (in a sealed package, in the refrigerator), a slime made of starch and water loses its properties relatively quickly, dries and exfoliates. It makes no sense to revive such a toy. Knowing how to make a slime out of starch and water makes it easier to create a new anti-stress. The toy will take no more than 20 minutes to make.

From hydrogen peroxide and glue Ray

This slime combines many good qualities: it stretches well, shines brightly, flows down beautifully, and has a pleasant softness for the hands. And thanks to the peroxide, the toy is distinguished by its lightness, although it is not a fluffy one. But do not add a lot of it, this component is not able to increase the base like shaving foam.

Proven recipe

• 85 ml of Luch glue,
• 1 tbsp. l. coca cola,
• 3 tbsp. l. film masks,
• 1 tbsp. l. shampoo,
• 1 tsp acrylic paint,
• 1 tsp hydrogen peroxide,
• 14-15 doses of Teymurov spray.

How to do it yourself

1. Glue is placed in the work utensil.
2. It is necessary to pour Coca-Cola to it.
3. The components are mixed so that all bubbles come out of the added drink, and the liquid becomes homogeneous.
4. The next component is a film mask.
5. It is also mixed into the composition using a spatula.
6. Then shampoo is added to the base.
7. After stirring, you can add dye to the composition.
8. The mass should be made evenly colored.
9. Peroxide is added for volume and the base is stirred again.
10. It remains to inject the activator - Teymurov's spray.
11. The base is stirred with a spatula until stabilized.
12. When it becomes hard to work with it, you should knead the slime with your hands.

We recommend reading about how to make a slime from plasticine. From the article you will learn how to choose plasticine for slimes, recipes for making slimes from different types of plasticine.

And here is more about what and how you can thicken the slime.

In all recipes, peroxide can be replaced with plain water, that is, it does not play an important role in the preparation of slimes.But if you want to make a toy "with a twist", you can add a little liquid to the glue

From this it will become a little more airy and "click" louder.

Be sure to watch the video on how to make a fire slime from hydrogen peroxide and Ray glue:

Slime with sodium tetraborate

Such slimes are considered the strongest and most durable, especially if only high-quality materials are used in their creation. The main ingredient in this method is sodium tetraborate, aka borax solution, which is considered the most effective thickener for slime and is sold in pharmacies.

Recipe number 1:

• sodium tetraborate - 15 grams;
• PVA glue - 200 grams;
• dyes as desired;
• gloves;
• capacity.

Pour the glue into a container and, stirring it, gradually add the thickener until the desired consistency is obtained. You can add a bright dye to the resulting slime, mix it until a uniform color is obtained and rinse with water. On average, this recipe takes 5 to 20 minutes, depending on how dense you want the finished toy to be.

Recipe number 2:

• cold water - 200 ml;
• borax solution on glycerin - 10 grams;
• PVA glue - 200 ml;
• dyes (optional, food or gouache);
• gloves;
• capacity;
• stirring stick.

Mix water and glue, color the mixture with dye. To thicken the mixture, pour in the tetraborate little by little, stirring the contents of the container with a wooden stick. If done correctly, the mixture will begin to peel off the sides of the bowl and thicken. To even out the texture, you can add more thickener or glue.

–