Operational safety
Just choosing and buying a heater is not enough; for a long service life, you need to follow some rules for using an electrical appliance:
- it is strictly forbidden to dry things on any heaters;
- you need to be extremely careful when using any heating device. The oil heater reaches a temperature of 150 degrees, the infrared heater - 400 degrees, so the device must be at a safe distance from a person;
- autonomous operation is permissible only for devices with thermostats, otherwise the device must always be turned off when it is unattended.
For a summer residence, it is best to choose an economical and efficient heating device.
If we take into account all the information below, as well as customer reviews, we can conclude that preference should be given to quartz panels. But if this option is not suitable for some reason, you can use a convector or an infrared emitter.
Types of heaters
Now on the market for buyers there are many types and modifications of heaters. They are different in type, principle of operation, as well as appearance and fastening.
The most popular device modifications:
- oil;
- convector;
- fan heaters;
- IR emitters;
- quartz.
To choose the best option for your country house, you need to carefully understand the operation of each such device separately, study their characteristics, as well as the pros and cons, and take into account the peculiarities of operation.
Oil radiator
The most popular type of heaters
One of the disadvantages of this type is the high energy consumption. Also, these radiators have a small heating area. There are modern modifications that are equipped with a fan, which allows you to increase the area of \ u200b \ u200baction.
It should be said that radiators are extremely reliable in that it is almost impossible to depressurize the case. One battery can work well for ten years without any maintenance and repair.
Fan heater
This appliance works by passing an air stream through a ceramic or spiral heater. The air is driven by a fan installed in the case.
These devices have such advantages:
- fast warming up of a small room;
- compactness of the device and the ability to easily transfer it from one place to another;
- their cost, as a rule, is very budgetary.
But there are also disadvantages:
- the fan heater dries the air and even burns oxygen during prolonged operation;
- due to the fan operation, it is quite noisy;
- the smell of burnt dust is felt during operation.
Convector
Convectors are a recommended option for heating a house in the country, because they have the ability to work independently. A special overheating sensor and a drop sensor turn off the device, which prevents a possible fire.
The advantages of such models are:
- low power consumption;
- ease of use;
- efficiency.
The principle of operation is natural convection in the room. During the operation of such a device, the air practically does not change its humidity. It is the most energy efficient heater in existence today. This is achieved by installing a thermostat.
The disadvantages of convectors are:
- slow heating of air;
- the need for constant work. If the convector is turned off for a while, the room will cool down very quickly.
Infrared emitters
there are floor and wall models
Modern infrared emitters have many useful functions, for example, controlling the operation of the device from your smartphone.
Such a radiator can be warmed up even outdoors, since heat is radiated from it only in the field of its action.
The downside is its cost, which is twice as high as that of oil and convector modifications.
Quartz heater
This is an interesting and very effective novelty. Such heaters are rightfully called energy-saving. The principle of operation of quartz panels is that a heating element is mounted inside, which heats the slab made of quartz sand. This appliance is quite safe as there are no exposed heating elements. When wall-mounted, such models look very stylish and do not take up much space.
Catalytic heater
This appliance generates heat due to the flameless combustion of fuel. Strictly speaking, gasoline or gas is simply oxidized. Such a device is considered the safest to use. But this type is not popular with buyers.
Heater of which modification is preferable for giving
It is best to choose such a modification.
Having studied the characteristics of all heaters, we can conclude that a quartz or catalytic electric heater is perfectly suited for these criteria.
An infrared emitter can also stand in a row with them, if you do not take into account the cost of the device.
To choose a good electric heater and not regret the money spent, you need to pay attention to the following:
- If there is electricity in the country house, then nothing can be better than a quartz panel or an infrared emitter.
- If there is no electricity in the house, then the best option would be a gas catalytic heater.
- If the autonomy of work is very important in a particular case, then it is worth considering models with such a function and thermostats. The ideal option here would be a convector.
- If the country house has a large area, then quartz panels will help here, and you need to purchase several of them. They will perfectly cope with their task and the house will become warm.
When buying climatic devices, you need to take into account not only the characteristics, but also the reviews of people who have already used this or that device. The rating will help you make the right choice.
The following will be a list of companies - manufacturers of climatic equipment, taking into account their popularity:
- Timberk - Leader of sales, which offers the buyer any type of heaters. The manufacturer is renowned for its high quality.
- Ballu are exclusively infrared autonomous heating systems. Ceiling models that emit heat at a large angle are very popular. In addition, a thermostat is installed in them.
- Rolsen is a manufacturer of oil coolers. These heaters are economists and extremely productive. In addition, the cost of this brand is quite acceptable.
Naturally, each person can make their own rating, unlike this one. But this list was compiled taking into account numerous customer reviews.
Saving
The main reason why it becomes necessary to change the usual heating methods to new ones is the large sums in monthly receipts for light. Even using gas heating, you often have to resort to additional heating devices.
It so happens that the system allows you to maintain heat throughout the house, except for the bathroom or corridor, for example. One way or another, you are not ready to overpay monthly and annually, unreasonably large sums.
Note
An infrared heater can save you 30 to 50% of your normal costs. Automatically turning off, bringing the room to the required temperature, it will not let the numbers on the counter spin in vain. This is the maximum efficiency, you pay exactly as much as you spend.
Scientific progress is moving forward, and what once seemed impossible has long been achieved and is available to everyone.Using the advanced methods of home heating, you eliminate the flaws in the devices that embarrassed you, to a minimum. By replacing a boring and inappropriate old heater, you save your money, save your health and pleasantly dilute the interior. You no longer need to worry about stocking up on warm clothes and blankets for future use when leaving for the country. Going to your beloved home in cold autumn, you will quickly and simply create warmth there and relax after long weekdays.
Usage
The infrared heater is very easy to pick up and install. Depending on which room you need to constantly maintain a certain temperature. Energy-saving appliances are always especially relevant in rooms where you and your family spend a lot of time. Kitchens and living rooms, equipped loggias in which pleasant hours pass unnoticed, are more profitable to equip with appliances marked "energy saving". Therefore, when choosing official dealers in a store or in the offices of a company, you must go with a certain set of knowledge. Take into account the parameters of the room, its height, the state of the ceilings, this will help you choose the required size of the device that creates the lighting range you need. Depending on the size of the lamp, the parameters vary. To heat the required area, you simply press the switch. You can feel the warmth in just a minute.
Ceiling IR heater
How to choose an infrared heater for a summer residence
Now we come to the most important question - how to choose an infrared heater for a summer residence. Let us immediately mention the fact that a thermostat is required for economical heating. It can be built-in or plug-in, mechanical or electronic. The greatest efficiency is provided by electronic thermostats, which more accurately maintain the set temperature.
Next, you need to decide on the operating conditions and the availability of certain energy carriers. If there is main gas in the country, nothing prevents you from using gas infrared country heaters. They are economical and provide relatively cheap heating. Their disadvantage is that good ventilation is required for indoor operation. But if you plan on heating your terraces or verandas, then gas heaters are ideal.
The same heaters can operate on gas cylinders of various capacities - these can be full-fledged cylinders with reducers or miniature cylinders with collet connectors.
By installing a gas infrared heater in your summer cottage, you can enjoy pleasant evenings outside.
Economical electric infrared wall heaters for summer cottages are the carbon models mentioned above. They provide fast warm-up with minimal energy costs. If necessary, they can be placed on the floor, forming one or another direction of infrared radiation. Similar heaters can be used to heat open areas, verandas and terraces.
Wall-mounted quartz heaters are useful for heating rooms. They are quite thin and tiny. When mounted on walls, they generate directional infrared radiation. If you do not want to use wall-mounted equipment, you should take a closer look at film ceiling heaters. Their advantages:
- low power consumption;
- ease of installation;
- high fire safety;
- the ability to work in premises of any purpose.
The disadvantage of such heaters will be their high cost, but it will quickly justify itself.
Ordinary infrared ceiling heaters, including those for suspended ceilings, can also be used to heat a summer cottage. They do not clutter up the space and provide good heating.Supplement them with a thermostat, which will help maintain the set temperature and ensure economical use of energy.
When installing thermostats, avoid direct sunlight. Thermostats should not be in the range of infrared heaters, as this will cause them to directly heat up and fail to maintain the temperature.
Popular models of infrared heaters for summer cottages
Next, we will consider several popular models of infrared heaters for summer cottages. There are a lot of heaters on sale, but only a few of them have earned popularity among consumers.
IR heater Peony Thermo Glass P-06
Infrared heaters with a thermostat for giving Pion Thermo Glass P-06 are energy-saving equipment. The presented model has a power of 600 W and heats an area of 12 square meters. m. The heater is equipped with overheating protection, which prolongs the service life of the equipment. The installation height is 2-3 meters, so it can be used in any room. Installation is possible both on walls and ceilings.
The main difference of this model is that it is a designer heater with a transparent glass body. The glass itself is conductive, it also serves as a heating element. Such glass cannot give an electric shock, since the electrically conductive layer is inside. Such heaters can be used in rooms for various purposes, characterized by an excellent appearance.
The glass heating temperature varies from +100 to +300 degrees, so these heaters should be installed out of the reach of children. The glass itself is very durable and does not break on impact.
IR heater Almac IK11
Almac infrared heaters with a thermostat for summer cottages are reminiscent of fluorescent lamps. They have external thermostats, they are mounted in walls or on walls - depending on the chosen design. Can these heaters be called energy efficient? Of course - when heating an area of 20 sq. m they consume only 1 kW. The maximum installation height of the equipment is 3.5 meters.
These heaters are suitable for installation in any premises - it can be corridors, built-in garages, halls and bedrooms, kitchens and many others. By supplementing Almac heaters with thermostats, you can achieve good energy savings.
IR heater Ballu BIH-AP2-1.0
This flat and thin electric infrared heater is well suited for heating a summer cottage. Its design resembles a flat fluorescent lamp. The power of this model is 1 kW. Installation is carried out using special brackets or cables, the maximum suspension height is 3 meters. To regulate the temperature, this heater is connected to the electrical network through a thermostat.
Ballu is a renowned manufacturer of infrared heaters. The equipment produced by it is distinguished by high reliability and no less high efficiency. The purchase of electric and gas infrared heaters or Ballu convectors will be an excellent solution for organizing heating in the country.