Best gas heaters 2020

Features of use in the cold season

This situation often arises. Gas tanks are on the street in metal cabinets. In the summer everything was fine, but when the temperature drops, a problem arises - gas does not enter the house.

The reason is this:

Household cylinders are filled with a butane-propane mixture. The boiling point of butane is about 0 ° C. The boiling point of propane is 40 ° C. As a result, at low temperatures, the gas burns unevenly and interruptions occur.

There is only one way out - to maintain the temperature required for the evaporation of butane. Of course, this does not apply to containers that are located in a room where the temperature is above zero. But those that are located on the street have to be purposefully heated.

One of the options can be blowing warm air from the room: with a fan through an air duct brought into a gas cabinet. It is also possible to heat the cylinders according to the underfloor heating principle by placing the heating element in the cabinet floor. However, the main thing is not to overdo it and not overheat!

Of course, you cannot use open heating elements like nichrome spirals for heating and, moreover, an open fire.

Insulate the gas cabinet with mineral wool. This will save the cylinders from overheating in summer and hypothermia in winter. In addition, mineral wool is a fireproof material.

There are also nuances of refueling cylinders in the cold season, but we will talk about this separately.

Do-it-yourself well construction in the country: detailed instructions, water supply from the well, original decorative design ideas (75 Photos & Video) + Reviews

Furnace shapes

According to this indicator, the following models of fireplaces are distinguished:

• frontal - mounted near walls;
• angular - a place is allocated for their installation in a specific corner;
• island - mounted in the middle of the room, which provides a full view;
• double-sided through - they are embedded in partitions, thereby providing a view from both sides.

Owners of summer cottages and country houses can choose the shape of the firebox, relying only on personal preferences. Also, the choice of shape will depend on the room in which the heater is supposed to be installed. In the case of apartment residents, the approach should be more deliberate. As a rule, implementers recommend that such clients give preference to frontal or angled versions. These models are perfect for apartments, because take up less space.

Main technical characteristics of balloon gas stoves

The characteristics of the components include the number of burners (from 1 to 8), their power, the surface of the tile (glass ceramics, stainless steel, tempered glass), oven (up to 160 liters), the presence of a timer and an indication unit. Plates have touch, mechanical or electronic control.

Gas hose and reducer - constant companions of gas stoves

Balloon material and size

Before purchasing a gas cylinder for a summer residence, find out the reputation of the supplier company. In suspiciously cheap workshops, there is a great chance to purchase low-quality equipment with dubious standards, or even without any guarantees for impeccable work. You should also not refuel in such places, even if it is the closest place to your home.

The material from which the cylinder for the propane-butane mixture is made is steel from a carbonaceous substance. Standard wall thickness is 3 mm or more. With a design pressure in a high-quality cylinder of 5 MPa, but only 1.6 MPa is required during operation.

The familiar view of a cylinder for household gas

In addition to the usual carbon steel tanks, there are cylinders for sale made of composite materials for liquefied gas. Such devices are more resistant to internal ruptures, have transparent walls through which the remaining amount of the substance can be seen.

Wide range of composite gas containers

After choosing a cylinder, a suitable volume of a gas tank is determined: the documents on the stove indicate the consumption of a mixture of butane and propane. It is these components that are used for domestic use. The standard specifies the percentage of these components. The content of sulfur and some other elements is permissible, however, such substances can adversely affect certain parts of the equipment.

The company that refills cylinders should be well established

When refueling, take into account that the gas mixture should be 15% less than the volume of the container.

Gas cylinders are checked every five years, and if the equipment is suitable for further use, a new inscription is stamped on it. The usual color of such equipment is red. If you are careful when choosing a balloon, then your eye will not miss a single defect, of which there may be plenty. The valve can pass gas, which will indicate a soapy solution. The quality mark may be missing, or the technical inspection period has been missed. You may notice cracks or dents, corrosion, broken cap threads, improperly installed support or damage to it. To prevent mechanical damage during the transportation of any element, a cap is used. Remember that the rule for transporting gas containers for individuals is limited to five vehicles per unit of transport.

Gas supply hose - which is better

The market makes its best and highest quality offer: a special bellows hose.

An expensive and high-quality element for gas supply

Such a hose is covered with a polymer material, which prevents many problems in the operation of the equipment. A cheaper analogue is a rubber hose in a corrugated stainless steel sheath.

Despite the low price, such a supply element will work for a long time and well. There is also an economical option offered on the gas supply equipment market, represented by a rubber hose with a fabric braid. Although when visiting your home by gas service workers, you will hear a recommendation - to replace such an eyeliner with a rigid stationary option.

Whatever you choose, be sure to study the product certificate, warranty and manufacturer's reviews. A quality gas hose should perform flawlessly for over 30 years. Below in the article you will find recommendations for installing a bellows hose. The suggested length is 4.5 m, which allows you to move the slab and furniture next to it.

Reducer

The reducer must reduce the gas mixture to the optimum level for operation. This component can be direct or reverse, calculated for different volumes of gas. Reducers of different models have some differences in purpose, quality of materials, availability of pressure gauges.

The main types of gas fireplaces without a chimney

By location

• Wall-mounted;
• Outdoor;
• Embedded.

Floor-standing models are often equipped with casters or can simply be carried to any convenient place.

A convenient option, since it does not require special tweaks during installation and can be used even outdoors, on verandas and in cafes.

For example, The Buzz by Faber. This is a tall fireplace - a Vet with a pair of wheels. Powerful enough to feel the warmth from it, even in the fresh air.

Wall-mounted models are hung on anchor bolts.

Installation of stationary embedded devices is more difficult, but the result is more aesthetic. The front panel of the fireplace is flush with the wall, the device does not hide the space of the room. In the wall, you can "hide" and gas supply communications. In addition, such a fireplace can be used to decorate a wall, then the flame can be observed from two or even three sides.

By viewing angle

• unilateral;
• double-sided, or through;
• trilateral;
• insular.

There is an interesting version of island fireplaces, which do not have glass of the firebox, and combustion occurs in the form of an open fire in the middle of a special table.

Option for a country fireplace

An example of a model is Napoleon Victorian 1061.The table is a Victorian style fireplace that can be used as a coffee table when the fireplace is off.

It is important that the glass of the fuel chamber has an anti-reflective coating, then it will be possible to admire the fire from any angle of view.

The nuances of installing equipment on bottled gas

When assembling the unit, you need to know:

1. When laying a gas pipe, it is placed on the surface of the wall.
2. To prevent gas leakage, make sure that the pipes are correctly joined.
3. The fireplace is installed only in a ventilated area.
4. The firebox must not be placed in a draft.
5. When the fireplace has an open combustion chamber, flammable objects should not be placed close to it.
6. A flue duct is required for the unit to function.
7. The best option for a chimney structure is a stainless steel pipe, which is wrapped in non-combustible thermal insulation.
8. For finishing the unit, use natural or artificial stone, bricks or ceramic tiles.

All types of gas fireplaces for an apartment are endowed with excellent functionality. They are able not only to heat the room, but also to create coziness in the house, but also act as a decorative element of the interior. These functions are fully implemented in city apartments. In private houses, such a device is an auxiliary heat source with an already equipped heating system.

There are infrared fireplaces that run on liquefied gas. Infrared heat is emitted by special heating panels made of ceramics.

Natural gas fireplaces are marked with the letter N for natural. For fuel to enter the device, you must connect to the main gas pipeline.

Often, the owners of summer cottages build a fireplace in the open air. For example, a gazebo installed in a garden requires heating. When installing this type of device, you need to equip a chimney.

Pros of using them

The centuries-old history of using wood-burning fireplaces for heating a home has revealed all their disadvantages: high consumption of firewood and the need for their preparation and storage, ash, soot and soot in the house, low efficiency. Modern realities bring their own difficulties: it is often impossible to install brick stoves and fireplaces in a city apartment due to the heavy load on the floors and the difficulty of coordinating the chimney, and in a private house, the construction of a traditional fireplace requires serious costs.

An alternative to a wood-burning one is a gas fireplace, which is not inferior in decorativeness, while its installation is easier, and heating is more efficient.

What are the advantages of gas fireplaces? They are obvious:

• safety - modern models have a sealed chamber that excludes gas leaks and sparks entering the room;
• when gas burns, soot and soot are not released, and the temperature of the exhaust gases is low, which simplifies the chimney arrangement;
• automation of the combustion process - to ignite the furnace, just press a button on the remote control or turn the thermostat slider;
• there is no need to prepare firewood, no space is needed to store them;
• fireplaces can operate both on main gas and on bottled gas, which allows them to be installed in any home, even remote from the benefits of civilization;
• modern gas fireplaces are decorative, you can choose a model that will fit into any interior.

The price of gas furnaces, however, is quite high. But, if you count all the costs of building a traditional brick stove or fireplace, as well as the foundation and chimney for them, it turns out that the cost of installing these heating devices is about the same.

Heating gas: pros and cons

Gas boiler connected to cylinders

Gas boilers are now used everywhere, because they are simpler and more convenient than solid fuel ones, and cheaper to operate than electric ones. But this is where there is a centralized gas supply. But what about our case?

The main questions that arise for any summer resident thinking about a heating system on liquefied gas:

• Is it possible to efficiently heat a house by powering the boiler from a cylinder?
• How long can a boiler work on one cylinder?

Let's figure it out.

So how much gas is in the bottle?

• Balloon with a volume of 50 liters. The cylinder contains 21.5 kg of gas *.
• 27 liters - 11.4 kg *.
• 12 liters - 5.3 kg *.
• 5 liters - 2.3 kg *.

* Data taken from the label on the cylinders. In reality, the numbers may differ.

How many cylinders are required for the continuous stable operation of a gas boiler?

• The average gas consumption for the boiler is 15 liters per day per 100 sq. M. heated area.
• One 50 liter tank holds about 22 kilograms of gas, which corresponds to about 35-42 liters.
• That is, one such reservoir will be enough for two days.

It makes sense to constantly use liquefied gas for heating only if you have a gas station nearby or if you have several filled containers in stock.

For long-term trouble-free operation of the heating boiler, you will need a whole battery of gas cylinders

In addition, in any case, the cylinders will have to be transported to refueling, and this is an additional cost for gasoline plus the time spent.

Therefore, heating with liquefied gas can make sense in the following cases:

• A small heated area of ​​the house and the house is well insulated, which will reduce gas consumption to a minimum
• In the near future, they plan to gasify your summer cottage settlement, so the use of liquefied gas is a temporary measure.
• Gas heating is used for a small amount of time and works in conjunction with other heating equipment
• You have access to very cheap, or even better, free gas, which, of course, is extremely unlikely.

By and large, it makes sense to use bottled gas for heating only occasionally: you arrived at the dacha, it is cold in the house, there is no time to chop wood, or just laziness, and the room needs to be warmed up. But in this case, the installation of a gas boiler is impractical.

If in the cold season, arrivals to the dacha do not occur often, you can purchase and install gas heaters in the room. You can get warm in just a couple of minutes. At the same time, you will save on installation of the heating system and fuel.

If your trips to the dacha are irregular, and, in addition, you have an unheated garage, buy a portable (mobile) gas heater. It can be easily moved around the house, transported by car, installed in any room and quickly raised the air temperature in it to a comfortable one. A gas cylinder is placed inside such a heater and covered with a protective casing.

Bed for a Dog: a description of the key points, step-by-step instructions for making your own hands (140+ Photos & Videos) + Reviews

How to choose the right one

In principle, all selection criteria are fully consistent with the selection of conventional heating units. It is based on the power of the device, that is, the degree of its heat output. From here, not only the gas consumption is calculated, but also the overall dimensions of the installation. This is especially true if the fireplace will be installed in small rooms, where every centimeter of area counts. Therefore, we recommend matching between the volume of space in the room and the dimensions of the device itself.

By the way, the power of the heating system is determined by the usual ratio of the two values, as with all heating devices. One square meter of the heated area should consume 100 W of thermal energy. For example, if the useful area of ​​your summer cottage is within 65 m², then you need a 6.5 kW fireplace to heat it.

As for the gas consumption, then it is necessary to take into account the type of fuel to be connected. If this is a highway, then there is no point in calculating the flow.The installed counter will show you everything. But if a gas cylinder is attached to the fireplace, then there is a need to calculate how many cylinders you need for the autumn-winter heating season

No need to invent a bicycle, just pay attention to how long one cylinder will last for you

Unusual wall option

The selection criteria also include the type of installation used:

• Floor. It is clear here that a gas fireplace for a summer residence is installed on a floor base.
• Wall. This is a closed hearth heater, most often mainly made of metal, which is attached to a wall surface.
• Embedded. In fact, this is a ready-made firebox with a gas burner installed inside, which is built into the wall or a portal created by a separate element.
• Street. They are most often used when organizing a hob. For example, in summer kitchens or gazebos. This is the easiest option in terms of installation, because there are no problems associated with installing the chimney. It is just a pipe installed vertically.

With gas cylinder

In general, ready-made gas fireplaces are a way out for many summer residents. It will take both time and money to build a brick structure. In addition, the process of laying bricks itself is a serious matter, and experience is indispensable here. Calling a stove-maker is to double the construction budget. So it makes sense to think about whether it is worth building a brick fireplace, is it not better to purchase a ready-made metal one and revet it at your own discretion. At least with the same brick.

By the way, among the offered models, experts give their preference to fireplaces made of stainless steel. They are more reliable, with a long service life, with low inertness (heat up quickly and cool down quickly), with high thermal conductivity. True, in comparison with cast iron samples, they are more expensive. The latter, although they are the owners of reduced technical and operational qualities (of course, in comparison), but they are the leaders in sales. It's all about the price of the product.

We remind you that we are now talking about the material from which the firebox is made. After all, a completely stainless steel fireplace is an expensive pleasure even for wealthy citizens.

Interior with gas fireplace

Installation

This process will depend on which type of gas fireplace for heating you choose as a basis.

• Under the floor version, a layer of non-combustible material must be laid on the floor.
• The wall-mounted one must be fixed to the walls according to the given installation parameters set by the manufacturer.
• The recessed version has a cladding of your choice. But even here it is necessary to take into account some dimensional positions related to the safe operation of the device.
• If you use main gas as fuel, then the connection of the pipe must be made by specialists. An acceptance certificate must be drawn up.
• If bottled gas is connected, then you will have to organize a room where gas cylinders will be stored.

Benefits of gas fireplaces

A gas fireplace has many advantages over wood and electric models. Not everyone can tinker with firewood - they need to be chopped, dried, and organized for storage. In a city apartment, masonry will take up an insanely large amount of space. And the burned-out remnants of firewood need to be disposed of. Plus, you need a serious chimney. Advantages - a slight smell of haze, a cozy click of burning wood, a kind of natural flame.

Electric fireplaces are not fireplaces at all - this is the most common imitation. It is realized using LCD displays with a looping video. There are also options where a liquid, illuminated by lamps, evaporates and boils. Live flame effect realized with the help of special lamps, which create a rather impressive picture. Pros - no chimney needed, no fiddling with coals. Minus - imitation, it is imitation, without any comments.

A bottled gas fireplace will be an excellent alternative to imitations and wood-burning fireplaces. Let's consider its advantages:

• Ease of installation - just install in the right place and connect to the chimney.
• No need to store firewood - a solid saving of space in an apartment or a country house.
• Instant ignition without any fuss - enjoy a live flame immediately after switching on.
• A living flame is not an imitation, although the snapping of firewood is not audible.
• There is no need to bother with cleaning ash, coals and unburned logs.

There are also some downsides:

• Gas equipment by itself is not very safe.
• Gas fireplaces require regular maintenance.
• The need to organize a chimney - in an apartment this can be a problem.

Nonetheless, gas fireplaces are a compromise between electric imitation and classic wood-burning designs.

The problem of organizing the removal of combustion products is solved by installing coaxial chimneys for fireplaces with closed fireboxes.

Heat output indicators

This parameter is measured in kilowatts. An accurate calculation takes place taking into account the declared power of the device and the estimated heating area. As a rule, the manufacturer or distributor indicates the area that a particular model of fireplace can heat. It should be borne in mind that manufacturers always indicate the capabilities of their creations, implying the heating of a well-insulated building. In other words, if the house is equipped with old windows that give a draft, or poorly insulated walls, the fireplace will show much less efficiency.

To roughly understand how much power you need a model is quite simple. 1 kilowatt of energy is spent on 10 squares of area. Multiply this figure by the area of ​​your home, and you get the required heating power.

Safety in use

Without knowledge of the safety rules, the operation of the stove for a gas cylinder is unacceptable!

So, there are a few "no" in safety precautions:

• a defective device must be repaired, not used;
• if there is a suspicion of a leak, use of fire is prohibited;
• children have nothing to do near such a unit;
• do not be careless and leave the working tile unattended;
• unused full cylinders, as well as empty ones are not stored indoors;
• after stopping use, the gas supply valve is not left open;
• overheating of the structure above + 45 ° C is unacceptable, therefore, the installation of the cylinder in direct sunlight is prohibited.

The stove must not be operated without regard for safety precautions

When changing the cylinder, the operability of all elements is checked. The new gas container is inspected for mechanical damage: scratches, cracks, dents. To keep your family safe, filled cylinders are weighed to determine the amount of gas: overfilled containers are dangerous! O-rings deserve attention: their damage is unacceptable, since the required gas tightness will not be maintained, and a leak will lead to an explosion.

How to choose a gas fireplace installation

Before purchasing a gas fireplace, you must clearly understand for yourself what purposes it is needed for, whether it will be used only as a decorative hearth or as a heating system in a country house. If as an interior item or just to admire the fire, then you can choose with a low power, up to 3-5 kW will be quite enough.

If as a heating unit for a house, then you need to be guided by the total area, for every 10 meters, with a ceiling height of up to three meters, 1 kW is needed. It is better not to use open models of fireboxes for heating, since their efficiency is low, and the power is also small.

Portable gas fireplace

The material of the body is also important, although gas as a fuel and provides for the use of various materials, stainless steel should be preferred if possible, but the design of the portal can be done in any way, according to the chosen interior style.

Costs emphasize on such a characteristic as gas consumption, especially if the hearth will operate on liquefied propane. The technical passport indicates the value, when operating at full power, if you use a gas fireplace for decorative purposes, then this indicator will be five times lower

Fireplace automation is a great addition to allow you to operate the appliance with safety and less personal control, however, this feature will add a lot to the price.

Security

Gas is a flammable substance, but, despite this, gas fireplaces are considered one of the safest devices. Thanks to the multi-level tracking system, any abnormal situations will be prevented.

From the movies, we know of cases when the gas supply stops, and then resumes, then the room will be filled with a poisonous substance. Of course, you need to remember this danger, but not in the case of a fireplace. The gas dosing system is equipped with a special pressure sensor. It reacts to a drop in line pressure and shuts off the supply in the event of a mismatch.

Infrared sensors are fireplace position sensors. They react if the device is suddenly dropped. In order not to cause a fire, the gas supply system is turned off.

Small mobile unit

Interesting: Fireplace stove with a water heating circuit

Design and specifications

There are many models of gas fireplace bodies in various sizes, types of design and purpose. Fireplaces can resemble an oblong aquarium (perfect for an Art Nouveau interior) or be built into a classical style portal.

A combustion chamber is located inside the housing, into which gas is supplied to the burner.

It is the fuel chamber that is supplied with heat-resistant glass, lining, decorated with stones, artificial wood or otherwise. A reflective screen, reflector can be installed here.

Fireplace in the country

The data sheet indicates the characteristics of each model:

• Fuel consumption per hour (directly proportional to power).
• Its heat dissipation (the amount of heat that the heater gives out).

The more powerful the heating device, the more intense the combustion process and the more waste products. Therefore, fireplaces without a chimney are not very powerful and play an aesthetic function rather than a heating one. Although you can feel the warmth from them.

A variety of gas fireplaces for a summer residence and a country house

Depending on the place of installation, gas heating units are:

• corner - mounted in the corner of the room;
• built-in - located in a wall niche;
• wall-mounted - fixed on the wall;
• frontal - located in the center of the room.

With regard to transportation, gas fireplaces for summer cottages or other types of housing are divided into:

• stationary models;
• portable units.

By power, they are divided into high, low and medium power.

By the type of fuel used, a gas fireplace for a summer residence and a house can be functional:

• on natural gas;
• on propane-butane.

By the appearance of the furnace openings, the devices are divided into:

• fireplaces with an open firebox, in this case it is possible to observe the flame, the efficiency of such a unit is not more than 16%;
• fireplaces with a closed firebox - they have a glass door, which is sometimes allowed to open when it is closed, the efficiency reaches 70-80%.

With regard to the method of radiated heat, there are fireplaces:

• devices with one-sided radiation - they are the most common option, they are distinguished by an increased degree of heat transfer;
• gas units of double-sided radiation are not so popular, but they have a presentable appearance, they require large volumes of fresh air;
• gas devices with three-sided radiation stand out for their beautiful appearance, but they have poor heat transfer, therefore they are used for decorative purposes.

Gas-fired heating devices, depending on their functional purpose and form, are divided into the following groups:

• gas stove; fireplace;
• boiler fireplace;
• fireplace convector;
• infrared fireplace.

The fireplace boiler provides heating, it is equipped with a portal, so it looks like a fireplace. This unit is able to regulate the degree of heating of the room.

The fireplace convector is a heater that has a front door made of heat-resistant glass, it has a number of advantages:

• presentable view;
• fire safety;
• silent operation;
• fast heating of the room;
• a small amount of combustion products.

An infrared gas fireplace without a chimney belongs to the popular heating devices. It operates on the basis of butane-propane. The device is used for heating residential premises, industrial or outdoor facilities.

The room is heated by infrared waves, as well as by direct heating of the ceramic panel. Installation of the device does not require significant costs, it quickly fills the room with comfortable warmth and makes your stay in it cozy. An infrared gas fireplace without a chimney does not need to be cleaned from ash.

1. When choosing a heater, you should give preference to the standard model.
2. It is better to purchase for a summer residence a gas fireplace without a chimney, which combines the function of a stove, which will allow the building to warm up faster.
3. The design of the unit must match the interior of the room.
4. The classic style involves the installation of a rectangular fireplace in the room.
5. For a modern environment, it is advisable to choose a unit with a non-standard color scheme and an unusual shape.
6. Devices with two- or three-sided radiation cannot heat rooms, they serve as a decorative element.
7. Infrared outdoor gas fireplaces are chosen for heating outdoor terraces and verandas.
8. When buying a device, you need to make sure that there are built-in electrical appliances and a temperature controller.
9. The heat dissipation required for the room and the power of the fireplace must match.
10. The device should be purchased in those stores where experts will help you make the right choice.
11. When buying a gas fireplace and other installation equipment, you need to require certificates confirming the compliance of products with all standards, and in addition, a manufacturer's warranty.
12. In the absence of centralized gas supply, gas fireplaces operating from a cylinder are used for a country house.
13. The cost of a gas unit depends on its type, the popularity of the company that produced it, the power, the material of the burner, and the design of the portal.

Advantages

This type of heaters has a whole range of advantages. Among the main advantages are the following points:

• safety - the design of such devices is 100% sealed, which excludes the possibility of hazardous gas entering the living space;
• absence of soot and soot during combustion - this factor eliminates the need for constant cleaning of chimneys and internal surfaces of the fireplace itself;
• automatic operation - to start heating, you do not need to kindle the fire yourself, because the combustion process starts after pressing one button; in addition, a special control panel allows you to adjust the intensity of the generated heat;
• compactness - the installation itself takes up less space, and there is no need to allocate space for storing firewood;
• versatility - such fireplaces are suitable for any houses: for a summer residence, for a country house and even for an apartment;
• different ways of "feeding" heaters - such fireplaces can function both from the main gas pipeline and from the cylinder;
• beautiful design - the devices are designed in such a way that they can complement any type of interior without any problems.

The main models of country cylinder gas stoves

As we have already said, before choosing a particular model, you need to assess the needs of your family. Perhaps it is better not to consider models with one or two burners, but to purchase a device with advanced functions, such as an oven.And if the needs of the family are not so great, then instead of a massive unit, you can look at portable models that are convenient to carry if necessary. Of course, such devices will be no less convenient than table stoves for main gas.

Tabletop

The tabletop gas stove for bottled gas above 3000 W is therefore very efficient. Additional advantages include ease of movement and size.

You can choose not only the required size, but also the color of the device

Floor standing

Full-fledged gas equipment, often with additional functions of an oven, barbecue, grill. There are models with a comfortable tempered glass surface, and you can also choose a stove with electronic control.

Such a unit is stationary, therefore, it is not adapted for outdoor trips.

Portable gas stoves

Portable structures for summer cottage use are quite inexpensive, in addition, they can be connected to a stationary gas installation thanks to a built-in gearbox. Such models work great on lightweight disposable cartridges.

Such devices can be taken on a hike.

Single-burner gas stoves

Perhaps the most convenient option for suburban use. Single-burner models are placed not only on a comfortable surface, but also mounted on a tabletop. Electric ignition is possible as an additional function.

Compact size suitable for a small kitchen

Gas stove for 2 burners

Two cooking zones are required when you need to heat up or prepare several dishes. This is also a very convenient option for a small kitchen, moreover, such tiles can be built into furniture.

Two-burner gas stove for a summer cottage under a cylinder
Multifunctional two-burner hotplate for cylinder

4-burner gas hob

You can find models with light weight and interesting design, high-quality coating. For such volumetric slabs, no special support is required.

Models with additional options

Such gas stoves may be needed for a long stay at the cottage of a large family. These reliable models with 6-7 burners, two ovens are very safe to use. The multifunctional hobs are equipped with automatic cooking programs.

There are many options on the slab market. The family's gastronomic preferences should be taken into account when buying the required model.

Varieties

To date, manufacturers produce summer cottage gas stoves with a cylinder of several types, which differ not only in design, but also in functionality. According to the number of comforts, the equipment is subdivided into the following modifications.

Single burners. Such stoves are ideal for bachelors and small families who rarely cook food in the country. Such a small structure is characterized by mobility, which allows it to be placed in any part of the house. In addition, the device can be used on the road during long trips. The main advantage of single-burner stoves is their low cost, but they are produced without an oven.

Gas stoves for summer cottages with a cylinder may also differ in installation location.

Tabletop. They are considered the simplest in design for cooking, since they do not have additional options. The main advantage of a tabletop tile is its light weight and compactness.

Finally

Gas stoves with cylinders are quite convenient for use in summer cottages and do not require any permission. However, it should be understood that such equipment, if incorrectly connected and operated, can be dangerous to the life of not only the homeowner, but also his neighbors.It is for this reason that it is worthwhile to closely monitor leaks and system malfunctions and periodically revise the equipment.

There are 5-burner stoves, but they are not so popular.

We hope that the information presented today was useful to the dear reader. If you still have questions on the topic, our team will be happy to answer them in the discussion to this article. Ask questions, share your experience - after all, it may be useful to someone.

And finally, we suggest watching a short video on the topic of connecting such equipment:

Previous Home Appliances100% Success in Fighting Viruses - Quartz Lamp for Home
The next Household appliancesWhy do you need an air purifier for an apartment: types, models and some characteristics