How to install a sink in a bathroom with your own hands

Sink above the washing machine: views

The water lily sink can have a drain hole in the center or on the side. Center drain models are deep - the outlet requires space. On average, the depth of such a water lily sink is 18-20 cm. When installed, there is a significant gap between the bottom and the top cover of the machine. On the one hand, small things can be stored there, on the other hand, it is not very convenient to clean. But there are most of such models, since with such a structure, less requirements are imposed on the balancing (stability) of the washing machine - the gap allows you not to worry about vibration during operation.

The gap remains

From the point of view of electrical safety, this option is not the best - if the siphon leaks, water will flow onto the machine. At the same time, there is a high probability that it will fall on live parts, which will cause a breakdown of the machine.

So when installing your washing machine, pay special attention to sealing. Perhaps, in addition to gaskets and seals, it makes sense to use a sealant

Just take not acrylic, but silicone, and better - for aquariums. It definitely serves a long time.

Side and rear drain

Side draining is less common. In this case, the branch pipe is displaced back and sideways and is located behind the machine body. With this structure, the sink can practically be laid on the top cover. The bottom is almost flat, the sides are flush with it, or maybe even slightly higher. The depth of such models in the front part is less - about 10-15 cm, and the rear, where the drain pipe is located, also has a height of about 20 cm.

Sink above washing machine with drain on side and back - PAA CLARO

There is a clone of it - the Belarusian model Belux Idea. The difference in price, I must say, is not too big - $ 234 for the Baltic version and $ 211 for the Belarusian one.

There are several more options in Latvian stores: STATIO Deja, POLYCERS izlietne Compactino. These are also works of local firms. A similar model is available in Russian production - Kvatro Water Lily.

Side Drain Water Lily Shell Options

What is so good about this type of sink? The drain is shifted back, which means that even if a leak appears, water will not get on the machine, which means it will not harm it.

Rear drain

There is a slightly more familiar variety - the drain is shifted back, but without sideways shifts. All the advantages of this design are the same, the category is slightly more numerous - they look not so unusual. There is also a non-standard version in this group - the BELUX EUREKA model (made in Belarus). In Eureka (pictured on the right), the mixer is shifted to the side, since the part covering the drain is removable - for cleaning.

Sink above the washing machine with a backward-displaced drain hole

There are many more of these models of sinks. There are about the same number of them as with plums in the center, so there is a choice. The range of prices is quite decent - from the Russian Suntec Pilot 50 (size 60 * 50 cm) for $ 36 to the Finnish Ido Aniara 1116601101 for $ 230 (size 60 * 59 cm). If you search, you can probably find both cheaper and more expensive.

With countertop

If the situation with space in the bathroom or toilet is not so critical, you can install a sink above a washing machine with a countertop. The machine is placed under the countertop. This is the most preferable option from the point of view of electrical safety. There is one drawback - sinks with countertops are expensive.

The washer can be placed under the worktop

To remove the dissonance between the part occupied by the body and the empty space under the sink, doors are attached to the second part, and inside you can make shelves or boxes for storing chemicals or other things.

Sink above the washing machine with countertop

There are also other models - angular, rounded, etc. They must be selected for each specific interior with their own dimensions.

Installing a washing machine under the bathroom sink

Before installing a washing machine, you need to purchase one.

Before arranging a bathroom, you need to choose the right washing machine and sink.

Due to the fact that the machine will be selected for installation under the sink, you need to rely on a number of specific criteria.

In order not to be mistaken with the parameters and other features, you need:

In width, you need to choose a machine of 43 cm, which will allow you to place it without any difficulties. If the width is larger, then it will be not only difficult to connect, but also easy to install.
The height of the product should not be standard. The level of the upper border of the machine is determined relative to the installed sink. To be more precise, there are certain norms - 80 cm. In this case, the machine itself should be only 70 cm in height. Finding such a product is not difficult, since modern manufacturers offer a large selection of various models.
The way of loading laundry can only be lateral. Other options are simply not considered, since there will be a sink above the machine.

Today, it is much easier to purchase equipment, in particular a washing machine, in the parameters that are required. In addition to the fact that there are an incredible number of manufacturers in the world, there are also thousands of different models, including square ones, for example, with dimensions 60x60 and the like. One has only to decide what exactly is needed, and you can safely go shopping.

Siphon installation

After tightening the brackets completely, you can start attaching the siphon to the sink with a side drain. Work in this case involves the following actions:

Assemble the assembly in accordance with the manufacturer's diagram that comes with the product
During the assembly process, special attention should be paid to the sealing elements and threaded connections, they must be very well lubricated with silicone grease.

When tightening threads, be careful not to deform or damage the plastic parts.
Next, take a pipe, with which the siphon is connected to the washing machine, and put a hose on it to drain the water
The connection point must be fixed with a clamp equipped with a screw tightening. Such measures guarantee a reliable connection even with a strong pressure of water from the washing machine tank.
At the end of the installation of the washing machine under the sink in the bathroom, connect the other part of the siphon to the sewage system

The corrugated outlet is bent in the form of a knee, fixed with electrical tape or a piece of soft wire so that an unpleasant smell does not enter the room. The fact is that the design features of a flat siphon, which is an integral part of a water lily sink, cannot hold a water seal for a long time. As a result, there is often a sewer odor in the bathroom.

Top-position advantages and disadvantages

An example of placing a sink over a washing machine

The sink installed on the washing machine does not take up any additional space, this is the main advantage of its use. Therefore, this combination is usually used in small rooms. But the installation of a sink on top of the machine is not excluded and where there is no special need to save space. The well-chosen combination contributes to the original perception of the entire bathroom design.

However, the design leads to the complexity of installation and disadvantages during operation:

The location of the water source above an electrical appliance has a safety impact. Splashes from the sink or leaking drainage channels can damage the washing machine or even shock a person.
Conventional products are not suitable for such an installation, as they would have to be mounted too high. A prerequisite is the purchase of a special flat model.
Features of installation and operation lead to the fact that you have to buy a washstand and a car in the complex. When choosing a washing machine, you need to take into account the parameters of the sink and vice versa.
The use of machines with vertical loading is excluded.
Some models function with a special flat siphon, the purchase and installation of which can be a problem.
In models without a special siphon and with a drain in the rear wall, the water does not completely drain. After washing, a small amount of soapy liquid will always remain at the bottom of the sink.

Some disadvantages are inherent only in certain variants of flat sinks. From a variety of models, you can pick up the one in which there is no specific minus.

Advantages and disadvantages

Those who have a washing machine under the tabletop note many of the advantages of such an arrangement.

The sink, complemented by a countertop, most ergonomically organizes the space above household appliances. On the resulting surface, you can place cosmetics, towels, hygiene products and various trifles.

The presence of the presented tabletop allows you to protect the washing machine from damage and various negative effects. Remember that placing heavy objects directly on top of household appliances damages its surface. The table top is able to handle the load perfectly. In addition, the washing machine will be protected from moisture and detergent.
The considered design solution allows you to decorate the bathroom in the same style. The table top can act as a connecting item for other interior details.

There are two main disadvantages of this design.

When a countertop is selected, it is matched to a specific model of household appliances. Based on the size and specifications of the washing machine. The best option is to choose a built-in machine that will harmonize in color and style with the furniture.
If your choice was stopped on a countertop made of artificial or natural stone, you should be prepared for high cash costs. Other materials cost significantly less, but stone countertops look more impressive.

Correct installation of the sink above the washing machine

The IKEA catalog always dictates fashion trends in bathroom furniture and original design solutions. The downside is that they are intended exclusively for large and free rooms, but what should the owners of a standard Khrushchev bathroom do?

It is quite possible to correctly install the sink over the washing machine with your own hands.

Alternatively, a solution is used such as installing a washing machine and a washbasin above it. Plus - space saving. For this design project, not just any one is suitable, but a special sink - Water Lily. It has such a feature as a flat bottom.

Preference is given to mainly horizontal drainage, which goes towards the wall and fully complies with safety rules.

The water lily sink can be:

Acrylic;
Glass;
Ceramic;
Natural stone.

The most practical are acrylic and ceramic sinks. The material has a dirt-repelling effect, which makes it easier to care for the product.

Some water lily models do not have a tap hole. In this case, it is installed on the wall, which also saves space, since the sink becomes narrower.

If the Water Lily has a side tabletop, then it will be convenient to place all the necessary hygiene products nearby.

When buying a Water Lily sink, you should pay attention to a number of nuances:

The dimensions of the sink must fully correspond to the parameters of the washing machine.
The set must include special brackets.
Responsible manufacturers put special pipes and a siphon for connection in the kit.
There must be a certificate for compliance with GOST and instructions.

To ensure that the sink is installed correctly and does not put pressure on the washing machine, you can install secondary brackets that will not be superfluous.

How to choose?

If you decide to opt for a sink with a countertop in the bathroom, then you must consider the variety of existing designs. To make the right choice, you need to consider several important aspects and certain recommendations.

It is necessary to pay attention to the material of manufacture. Manufacturers of such countertops use various raw materials to create the product in question.

You should find out the advantages and disadvantages of the basic materials.

Depending on the available space, you can opt for one of the design options.

The washbasin is installed in a specially prepared recess. The sink in this case is large, so you must take into account the availability of such a place for it. Such a corner model can be combined, and it is quite possible to create it with your own hands.
A worktop with a built-in sink, which is equipped with a niche for a side bowl of a certain shape. This option provides for the presence of sealing joints so that moisture does not get there.

Overhead washbasins, which are in demand among designers. In this case, it is possible to purchase a device in the shape of a heart, an oval or a flower. This design looks very original and makes the interior more sophisticated.
There are models available for wall mounting. This option saves space.
Consoles consisting of a supporting frame. They are attached to the wall and floor. This option is suitable for any room, it is durable and safe. You can make such a structure yourself, using drywall or brick.
Floor countertops visually similar to a curbstone. They are equipped with various cabinets where you can store cleaning, hygiene and cosmetic products.

What should be considered when buying equipment?

When deciding to install a washing machine under the sink, you need to know that experts recommend doing this only as a last resort, when there are no other options.

Installing a sink above the washing machine allows you to maximize the organization of the bathroom space. The equipment must be correctly selected and installed

Choosing the right washing machine

You should carry out your plan with the purchase of suitable equipment. Let's start by choosing a mini washing machine for installation under the sink. These are special devices that are produced by a number of well-known companies. They differ from ordinary ones in their size. The height of the equipment should not be more than 60 cm, the depth - from 34 to 43 cm.

It is clear that such a machine can only be designed for a minimum load of laundry, no more than 3 kg. Therefore, it is quite possible that it will not work for a large family. Some people do not want to install a miniature device and choose a standard one. In this case, you should still choose a narrow model that can fit entirely under the sink.

The height of the structure can be calculated using a simple formula: 15-20 cm is added to the height of the sink and the machine by the distance between them. The resulting value is the height of the shell edge. A distance of about 80 cm will be comfortable for a person of average height and a little higher for a tall one. If the value obtained is seriously different, it is worth thinking about another model or a stand on which you will need to stand up when washing.

Sink: which one should you buy?

Most often, the countertop located above the washing machine is called a water lily. It is a fairly flat, usually square bowl, with a depth of only 18-20 cm. Some foreign companies offer the buyer a washing machine complete with a selected sink.This model can be considered ideal, since the devices fit together well. But you can also find a separate option, produced by both Russian and foreign companies.

Moreover, such sinks must have a special drainage system. Experts warn that equipment with a drain system located above the machine is electrical hazard and should not be used in bathrooms. The drain system outside the device is considered safe. These are exactly what the water lily shells are equipped with.

The manufacturer most often produces bowls equipped with a vertical drain. However, there are models that have a horizontal drain in the back wall. These modifications are designed specifically for narrow washing machines. You should know that a vertical system will provide a faster drainage of water. It will also become less clogged. If you have to choose horizontal, you need to be prepared for more frequent cleaning and washing of the device.

Types and designs: features

Which model and installation method you should opt for depends mainly on the size of the bathroom. The chosen washbasin with a countertop will determine the beauty of the room and its convenience.

Conventionally, countertops can be divided into two broad categories.

It can be made from a variety of materials. When stopping your choice on one or another option, keep in mind that it is moisture resistant, otherwise the tabletop will soon become unusable.

Consider the most common materials for the manufacture of this product.

Natural or artificial stone. Such a tabletop will look luxurious and expensive. It is highly durable, can be cleaned using various chemicals, is characterized by durability and resistance to various types of external aggressors.
Wood, with which you can create a cozy and comfortable environment in the bathroom. Expensive wood is used here, which has a relatively short service life, so it is inappropriate to use a wooden countertop in the bathroom.

Glass that is not very popular in Russia. To use a countertop like this, you need to have perfect pipes that look attractive. In addition, glass needs special care.
Particleboard and MDF, which can be used in bathroom furniture only with a special coating. However, it should be noted that if such a tabletop is damaged, it will further swell from an excess of moisture. Because of this, the product will soon become unusable.

General rules for installing a machine under the sink

Regardless of where you plan to put a typewriter with a sink in the bathroom or in the kitchen, the installation includes several basic steps:

Sink installation;
Installation of her drainage system;
Mixer installation;
Installation of a washing machine and its connection to communications.

One of the main installation rules is that the general drain-system must be installed behind the machine, and the sink bowl must completely and with a margin cover the machine and the drain-system.

According to general rules, the sink is installed first, and then the typewriter. The mixer is installed on a fully assembled washbasin.

The mixer is connected to the general water supply pipes using flexible hoses. A tee is used to connect the washing machine to the cold water supply.

Before installation, you need to determine the total height of the finished mounted structure of the sink-machine, how much it suits all family members, especially children. The recommended standard is 80cm. If there are significant deviations from the norm, it may make sense to replace one of the items, or even both.

When connecting a machine, it is important to follow two rules:

The drainage system should be located outside the machine body and is best located between the machine and the wall.
The electrical wiring to the machine must be waterproofed and the socket for it is usually chosen with a cover.

Such a system minimizes the possibility of water getting into the machine, which will help prevent its breakdown and shock to a person, including static electricity.

Before installation, it is convenient to carry out preliminary marking, for this, put the machine to the wall at the chosen place, step back two or three centimeters from it and attach the sink, try on and make marks for the brackets.

After marking the brackets, you can drill holes for the mounting bolts and install the brackets. At first, the brackets are not fixed completely to the end, this will make it possible to make additional adjustments. We put the sink on the brackets, install the fixing hook of the sink according to the instructions for it.

Then the siphon is assembled, according to the instructions of its manufacturer, and installed on the sink, later a drain hose of the machine will be attached to it. The siphon is attached to the sewerage system through a corrugated pipe. After installing the drain siphon, it is imperative to check the general tightness and operation of the sink drain system, if suddenly a leak is found, then it is necessary to check the connections and, if necessary, redo them, treat them with sealant or attach plumbing adjustable clamps.

When the siphon is checked and ready for full use, the sink fixture is finally fixed, all the bolts are tightened until they stop.

Then you need to install the mixer. Its assembly and installation takes place according to the manufacturer's instructions. During assembly and installation, it is necessary to use rubber seals and special tape for plumbing work, all connections must be reliably sealed.

Sink installation

As mentioned above, when installing a sink over a washing machine, a number of rules must be observed:

All drain pipes of the sink should be led out of the body of the washing machine;
All electrical wires of the machine must be carefully insulated;
If the washing machine is equipped with a drain pipe, the width of the sink must be at least 58 centimeters.

The installation of the sink begins with the installation of wall brackets. In most cases, the sink is attached to the wall using special brackets and a fixing hook.

For the most accurate marking, it is recommended to install a washing machine, and place the sink above it at a distance of a maximum of two to three centimeters. Having made marks along the upper edge of the sink adjacent to the wall, it will be quite simple to mark the places where the brackets are attached.

After marking, you can start drilling the holes for the fastening bolts and installing the brackets. At this stage, the brackets are not fastened "tightly", but with gaps of 5-7 millimeters.

We try on the sink on the installed brackets. If everything is ok, proceed to the installation of the fixing hook (this must be done in accordance with the instructions supplied with the sink).

After installing the hook, we finally fasten the brackets and check the sink for its compliance with the horizon level.

The next step in the installation is to install the siphon. It is assembled according to the manufacturer's instructions. Do not forget to connect the drain hose of the washing machine to the siphon. For greater reliability, it is recommended to fix this connection with a plumbing clamp. After assembling and connecting the siphon to the sewer, it is imperative to check the tightness of the entire structure, and if leaks are found, check the connections again and, if necessary, treat them with a sealant.

When the siphon is assembled, the sink is finally fixed by tightening the bolts on the hook. Remember to seal the back of the bowl with silicone or acrylic sealant before doing this.

And the last stage in the installation of the sink is the installation of the mixer. It is produced in accordance with the manufacturer's instructions.The main thing when assembling is to use rubber gaskets and fum-tape to give all connections the necessary tightness.

Some sinks have a slightly different mounting system. You can learn more about installing such sinks by watching the following video:

In conclusion, I would like to say that installing a sink above the washing machine is an excellent solution to save space in a small bathroom. We hope that our tips will help you cope with this task on your own. Successful renovation!

Sealing joints

When performing work on sealing joints, you should adhere to a number of useful rules:

Install the gasket only on a dry surface, wiping the reinforcement with a rag or drying it with a construction hairdryer.
Degrease the contact surfaces (for example, with dishwashing liquid) and try not to touch them with your hands unnecessarily.
To connect plastic and metal parts, use special paronite gaskets, they usually have a hard surface and are painted yellow or red.
Too long pipes should only be shortened with a special pipe cutter for plastic pipes, avoiding even inconspicuous distortions.
Use silicone sealant to install the rubber gaskets to ensure the most durable connection.
If there are burrs on the gaskets and seals, be sure to remove them.
When installing, the gasket cone must point in the opposite direction from the nut.
If the rubber gasket is dry and no longer flexible, be sure to replace it.

Compliance with these rules will reliably seal the joints and reliably protect them from leaks.

Choosing a sink

Well-known manufacturers of sanitary equipment produce water lily sinks especially for installation above the washing machine. They come in various shapes, configurations, colors, and are made from different materials. "Water lilies" are universal - they fit into any style of bathroom interior.

The size

The dimensions of the sink must be larger than the dimensions of the washing machine. This is to prevent water from entering the washing machine, which is dangerous. The sink should protrude at least 2 cm on each side. The depth is usually 18-20 cm. Deeper models will have to be installed too high, which is not very comfortable, especially for people of small stature, and shallow sinks will lead to splashes on the electronic elements of the washing machine.

Security

Please note that water lily sinks can be equipped with a waste-overflow system. It prevents water from overflowing and moisture ingress into the washing machine.

Typically, the drain is located at the bottom of the sink and the overflow is on the side. The system can be equipped with plugs or automation.

Draining

The drain of the water lily sink can be horizontal or vertical. Vertical drainage is more practical because water does not stagnate in it. Horizontal drains have to be cleaned often so that there is no unpleasant smell in the bathroom. But the horizontal drain in this design is carried out outside the washing machine, which significantly increases the safety of the entire system. The horizontal drain can be located in the back wall of the sink or in the side.

Installing a siphon

it is necessary to place the outlet of the siphon in the bowl and fix it. If a sink with an overflow, an additional pipe is installed;
the pipe is screwed on;
the end of the pipe must be inserted into the sewer outlet. If the pipe size is small and does not correspond to the sewer hole, an adapter with the name of the cuff is used;
at the end of the installation work, you need to check all the connections so that there are no leaks.

Installing a siphon

The above instructions for installing and connecting the sink are used mainly for wall-mounted sinks or if you need to hang a corner sink, which is installed in a small bathroom. When installing a tulip sink, or using a countertop, the fastening method is slightly different. A sink that is mounted in a countertop or cabinet has the advantage of being very stable and fixing without drilling through the wall surface.

Conclusion

Note that, nevertheless, installing a sink over a typewriter is a very good option for small rooms and you can choose compromise models for both items, so that it looks beautiful and is convenient to use. Moreover, this option is great not only for the bathroom, but also for the kitchen. The machine can fit well into a kitchen set, where it can, if necessary, be built into the furniture and made completely invisible.

The design of plumbing and the choice of household appliances is now huge and you can easily choose a beautiful and functional option that will suit the area of your room and decorate your interior. Functional cabinets are often placed next to the machine, the sink is often mounted in an additional countertop, which can even be glass - there are a lot of options, pick up what you like and suit you in all respects. We've looked at various options.

The main thing in this matter is to choose all the necessary items correctly, including plumbing hoses and adapters, as well as to perform the installation with high quality, then your equipment and plumbing will delight you not only with their appearance, but also with long trouble-free operation and comfortable use.

We hope that our review on this topic will help you solve your difficult homework problem.