Titanium glue. application and characteristics of titanium glue

Instructions for use

General rules for working with Titanium glue:

To obtain a good adhesion, the surface must be cleaned, dried and degreased before gluing the material. You also need to remove all the irregularities.
The glue layer should be thin (except for liquid nails).
After applying the glue, you need to wait a few minutes, then stick to the base.
For the glue to harden, you need to wait no more than an hour, but you can load the surface and continue working only after a day.
In the case when the base is porous, the glue should be applied in two layers, allowing each layer to dry slightly.
Do not apply adhesive to whitewash. Before work, the surface must be washed and dried.
When the glue starts to thicken, it becomes difficult to work with it. In addition, the product loses its properties. In this case, it can be diluted with alcohol. But it is better not to allow drying at all, applying in small portions.

The rules for using Titan products will depend on the type of glue. The mastic should be applied pointwise, evenly spreading over the entire surface. When it is pressed against the base, the agent moves and in this way it is crushed into a continuous film.

The mastic dries up within 12 hours, but liquid nails harden within an hour. The latter should be applied dotted. Grasping occurs within 15 seconds. Liquid nails, according to the artisans, are best used for stone.

Powdered Titanium should be diluted with water, in accordance with the instructions on the package. Mixing should be carried out for at least 5 minutes. The mixture is applied in a thin layer only on the wallpaper. According to the instructions for Titan glue, the wall surface is not smeared. Transparent glue does not shine through and does not stain the base.

Titanium foam adhesive bonds surfaces, penetrating into small cracks and pores. After an hour, you can observe the maximum filling of the material. The dose of the squeezed out agent should be correctly calculated, taking into account the degree of its expansion. If you give more foam, brittle seams may not withstand the pressure and suffer. In the example of a door frame, it can simply bend outward. And with a lack of composition, reliable fastening will not work.

How to remove adhesive residues:

From solid non-porous materials, removal is carried out after drying, by breaking off. Then sanding and finishing with a sponge can be done.
It is necessary to remove the glue from porous soft surfaces until it hardens. To do this, use a damp, clean cloth.
From the front surface of the material, the composition is removed with a solvent.

On the video: Rules for using Titan glue.

Mortar preparation

The condition for the preparation of the solution is the room temperature of the driest mixture of plitonite and water. If the bag was stored or bought in a cool time, then before work it should stand warm for up to two hours.

The solution is made from purified water without chemical compounds, which is poured into a container with a cleaned bottom and walls. It is forbidden to mix in a dirty container, with dirty tools. If using a construction mixer, then the attachment is new or cleaned from the previous batch.

According to the instructions, 240 ml of water is needed for one kilogram of Plitonite dry glue. That is, a 25 kg bag consumes about 6 liters of water.

Initially, water is poured, and then the dry mixture is poured.

To check the correct preparation of the solution, it is applied to the wall, if there is no drainage, then the consistency is correct. The stirred mixture is left to swell for 5 minutes, then it is mixed again.Throughout the entire work, the mixture must undergo additional mixing.

Useful video on the topic:

Glue "Titan" - instructions for use

For the installation of wood, foam, leatherette, PVC and many other finishing materials, Titan glue is applied to a concrete, cement or gypsum base. It has excellent technical characteristics and provides a strong, reliable surface connection.

Specifications

"Titan" glue does not lose its quality characteristics, even if it is used at different ambient temperatures. The composition is characterized by resistance to direct sunlight, excellent elasticity. After curing, it does not become brittle and is not prone to delamination. Environmentally friendly, does not contain substances harmful to the human body.

Adhesive properties:

used for work indoors and outdoors;
suitable for bonding almost any material;
economically consumed;
perfectly glues polystyrene foam;
the seam is waterproof and elastic;
colorless, transparent;
sold completely ready-to-use;
does not contain substances harmful to the human body;
the elasticity of the composition does not change under the influence of different climatic conditions.

Forms of issue

Glue "Titan" is produced in several types, each of which has a different purpose.

Universal. Possesses moisture and heat resistance, forms a transparent adhesive seam, which becomes invisible after drying. It is used for gluing parquet, expanded polystyrene, linoleum, PVC, wood.

It is squeezed out of a hermetically sealed package in a thin layer through a special dispenser. It is applied to a previously cleaned, dry surface. Dries in 40 minutes, maximum adhesion strength is reached after 24 hours.

All of the above properties make the Titan universal adhesive an indispensable tool for installing ceiling tiles. Apply the compound to the tile with a thin dashed line, let it dry for a few minutes and press it against the ceiling.

Adhesive mastic is intended for gluing polyurethane and expanded polystyrene. Can be used for leveling surfaces and for ceiling tiles (to glue them).

Advice! Stir the mastic before use.

Apply to the surface pointwise with a spatula and attach to the base. Within three seconds, the position can be corrected. The glue-mastic sets in 20 seconds, dries completely in 12 hours.

Liquid Nails. The adhesive is a white paste with a high setting speed and excellent elasticity. Effectively bonds steel, ceramics, polyurethane, mirrors, wood and PVC, it is permissible to use indoors and outdoors at ambient temperatures from -30 to + 60 ° C. It is sold in cylinders that have mounts for a mounting gun.

Liquid nails are applied in a thick layer over the entire surface. This feature allows you to glue finishing materials on ceilings that have significant defects.

For wallpaper. The glue is available in the form of a powder, which must be dissolved in water before use. The mixture contains antiseptics that prevent the appearance and development of fungus and mold. Any wallpaper can be mounted using Titan glue.

Foam glue. It is characterized by high adhesion to mineral substrates, productivity and economy. It is used for laying foam and gas silicate blocks, foam and gas silicate, ceramic and silicate bricks.

Maximum adhesion occurs after 120 minutes; if glue obtained from dry mix is used - after 24-36 hours. You can work with the composition at an ambient temperature not lower than -10 ° C.

On the packaging of each type, there must be instructions for the use of the adhesive mixture.

What glues and what can be diluted

The technical characteristics of the glue lead to a wide range of applications. Composition "Titan Wild" glues parquet, glass, ceramics, paper, wood, linoleum, as well as natural and artificial leather. Ideal for attaching Styrofoam and Styrofoam. The universal composition allows you to stick together dissimilar materials.

If the glue becomes too thick, it can be thinned with rubbing alcohol. The liquid consistency allows better penetration into small cracks, but such glue dries longer.

What is the price

The cost of the glue varies depending on the volume of the package and the type:

Glue Titan Wild 0.25l / 98 costs about 32 rubles;
Glue "TITANIUM builds EUROLINE No. 601" at 425 g - from 74 to 83 rubles;
Glue "Titanium univers. 0.25l "- 36 rubles;
Glue "Titan 1 L" - 130 rubles;
Glue "Titanium S 0.25 L" - 50 rubles.

Varieties

There are many types of Titanium glue: assembly, for decoration, for wood, sealants and even for roofing. Each has its own characteristics and areas of application. Technical characteristics of Titanium glue are presented below.

- resistant to temperature and water. Dries up within half an hour. It is applied to a clean surface, left to dry for 2 minutes, then the surfaces are connected. If you mix glue with denatured alcohol, then this mixture can be used as a primer.

- assembly glue. Withstands the temperature range from -30 to +60. Dries completely in 48 hours. Possesses increased strength and fast setting. After drying, it forms an elastic transparent seam. Resistant to moisture, frost and does not contain harmful substances. It is used for mounting all materials, from wood to metal, but not suitable for foam rubber.

- professional glue designed to work with expanded polystyrene. With its help buildings are insulated. It is incredibly economical, one cylinder is enough for a working area of about 8 square meters. m. this glue can be used to glue foam to concrete, metal or wood. Differs in high thermal insulation and resistance to various fungi. Already 2 hours after gluing, the foam rubber can be sanded, cut or painted. While working with it, it is necessary to observe the temperature regime of the working environment: it should not be below 0 and above +30 degrees. It is produced ready-made, you can use it immediately after opening.

Another thing that the glue manufacturer has won the love of customers is its convenient packaging with a dispenser. It provides the most comfortable glue application without the use of additional tools.

Pros and cons of adhesives

Titan glue has a number of advantages and disadvantages, which should be familiarized with in advance. The main benefits include the following:

Convenience and ease of use. Many experienced builders praise the product for its ease of use. The adhesive is produced and sold in a small sealed package. To apply liquid to a surface, simply remove the cap and apply a little pressure on the dispenser.
Heat resistance. The advantages of Titan glue include its resistance to temperature extremes. The adhesive copes with both low and high temperatures.
Resistant to moisture. The product can be used outdoors and in damp rooms, since at high humidity the applied liquid does not lose its quality characteristics.
Harmlessness. In the manufacture of the adhesive mixture, microelements that can harm human health are not used.
UV resistant. Unlike Moment superglue, Titan can be used outdoors. Even in direct sunlight, the adhesive layer will not break down.
Transparency. The cured mixture is completely transparent, and therefore if it crawls out of the gluing, it will not be visible.
Coupling speed. The applied liquid hardens and reliably adheres to the treated surface within 30-40 seconds.
Resistant to corrosion. The adhesive composition prevents the development of rust and therefore is often used for gluing metal products.
Strength. The tool belongs to the group of high-strength adhesive mixtures that can withstand loads from 40 to 90 kg / cm2.

Among the disadvantages are:

Difficulty flushing. If the glue accidentally gets on your skin or furniture, it won't be easy to get rid of. To wash it off, you will have to use solvents.
Bad smell. An unpleasant, pungent odor is generated when working with adhesive.

How much does glue cost and where can you find it

The product is popular because it can be found in almost any hardware store. The product is also sold in the utility departments of supermarkets, shops and markets. The cost of glue starts from 60 rubles and up to 350 rubles depending on the volume and type.

The main advantages of the Titan line are the stability of the formulations to moisture and changes in weather conditions, high strength, and fast effect. The versatility of the tool allows you to use it not only during repair and construction work, but also for household purposes. Glue "Titan" is available in different forms, all the nuances of use are explained in detail by the instruction, so everyone can choose an effective remedy for their needs.

Lose weight easily (result in 25 days)

Why stubborn dieting DOES NOT Bring visible results, but only leads to frustration and depression, and how can you still lose weight in order to:

Get your husband's attention back or find a new man.
Feel the envious glances of friends and colleagues again.
Believe in yourself, feel slim and desirable.
Do not hesitate to go to the movies or cafes with your friends.
Do not hesitate to post photos from the holidays or with children on social networks.

Burn fat on target in problem areas

Price

The cost of Titan will depend on its type and volume.

Half a liter of the universal composition can cost 100-220 rubles.
For a liter you need to pay from 210 to 270 rubles.
Small containers of 0.25 liters cost from 32 to 50 rubles.

For glue foam, you can pay from 300 to 800 rubles.
Liquid nails cost 100-450 rubles.
If a glue gun is included, the price will be higher.

Modern technologies make it possible to create glue for different needs and specific applications. Titan glue stands out against the background of other manufacturers.

Popular with both ordinary buyers and professional builders. A large number of positive reviews and excellent technical characteristics allow him to occupy a leading position in the construction market among similar products.

Clay Titan
Is a good all-purpose adhesive. It is used in construction, repair and in everyday life. Excellent adhesion to most materials. The composition of the glue is suitable for permanently joining dissimilar materials. It has worked well with Styrofoam and Styrofoam ceiling tiles.

Universal, and most importantly, high-quality glue will help to reliably glue materials such as: ceramics, linoleum, artificial and natural leather, glass, paper, wood, parquet, PVC panels. In addition, "Titanium" is used to fix decorative elements, for example, from plaster.

Taking into account the specificity of different types of adhesive products of this brand, Titan glue has good performance in terms of performance. It works well in high humidity and extreme temperature conditions, without loss of quality level or loss of adhesion.

Unlike other analogues, "Titan" does not become brittle after hardening. If we consider in detail the composition of the glue, then there are no harmful components, which makes this product safe for use and further operation in the construction / renovation of housing.

Purpose and scope

Adhesives Loctite has an extensive list of uses.They are used to fix a wide variety of objects and materials. Substances provide a high level of adhesion.

Bonding items

The tools of this company allow you to fix a wide variety of materials, allowing you to achieve good adhesion.

The brand's products contain substances for bonding paper and cardboard.

Glass

Loctite products help to glue glass parts.

Corrosion protection of connecting surfaces

With the help of the company's products, it is possible to protect the connecting elements from corrosion. Also, the substances provide protection against the effects of chemicals, high pressure, vibration. In addition, they protect parts from temperature fluctuations.

Protection of complex structures from leaks of technical liquids and gases

The use of Loctite adhesives helps protect complex structures from gas leaks. They also prevent the leakage of technical fluids.

Hermetically sealed bushing components

The brand's adhesives help seal sleeve parts with cylindrical holes. The composition provides rigid fixation.

The composition is often used for repair work and fastening of various metal structures.

Loctite adhesives help to protect industrial ventilation structures.

Glue "Titan": technical characteristics and application

Stylish and laconic packaging design, good safety, adhesive reliability, excellent versatility - not all the advantages of Titan mounting adhesive.

Specifications

The renovation is coming to an end, the soul is singing, the eye is happy ... But some time passes and problems begin to appear - the seams of the wallpaper are peeling off, the tiles are falling off, the linoleum is bulging. What to do in such a situation? Start doing cosmetic repairs? The solution to all of these problems is Titan universal glue, guaranteed bonding of any surfaces in a matter of minutes!

A few decades ago, most builders could only dream of such a convenient and versatile tool that would help solve most of the everyday problems that arise. Modern glue Titan is characterized by many useful qualities:

- Versatility. The scope of application of the glue is very diverse. It is used instead of ceiling glue, for bonding plastic and linoleum, wood and glass. Today there is no need to spend money on different types of adhesive mixtures, it is enough to purchase a package of Titan glue and solve all the problems that have arisen.

- Reliability. Manufacturers of glue take into account all the nuances and possible areas of application of this product. Titanium is a heat-resistant and moisture-resistant polymer material that is guaranteed to fulfill the functions assigned to it in any climatic and weather conditions.

-Convenience. The glue package is opened with one turn of the cap. Small containers fit well in the hand, therefore making the gluing process simple and quick. The presence of a dispenser eliminates waste of material. The time for complete drying is up to 40 minutes, which is another advantage.

Application

This material is widely used in general construction and repair work of varying complexity. The scope of its use is a wide range of non-inert materials: polystyrene, plastic, ceramics and glaze, wood and cork, artificial leather, paper and fabric, plywood, carpet, parquet. Also, practice has shown that Titanium is excellently used for connecting different combinations of materials to concrete, cement-lime, gypsum and plaster bases.

Method of application

The glue is applied to a previously prepared clean and dry surface. The number of layers is determined by the properties of the materials to be bonded. After application, the liquid is left for 2-5 minutes to dry a little, after which the surfaces to be glued are connected. For bonding porous materials, it is recommended to apply two layers of adhesive.For lightweight materials such as ceiling tiles, the dotted application of the adhesive is sufficient. Before working with a whitewashed surface, it is recommended to clean and prime it. Materials can be glued not earlier than after 4 hours. The average time for the glue to dry completely is up to 40 minutes.

The main properties of the glue:

increased frost resistance,
a mass of transparent color,
excellent water resistance, moisture resistance,
heat resistance - tolerates sudden temperature changes well.

Main characteristics and method of application

Titanium glue is used not only for interior, but also for exterior work.
Used for bonding almost all types of building materials and household items.
It copes well with gluing polystyrene foam.
Due to its high bonding and sealing qualities, it is very economical to use.
It can be used in all types of premises, because it has waterproof qualities.
The glue is completely colorless, leaves no yellow residue.
The product is completely ready for use.
Safe and non-toxic, because Titanium glue does not contain chemical additives and solvents that adversely affect human health.
It has good elasticity, while it is not affected by changes in temperature indicators.

The use of Titanium glue also contributes to savings, it differs in affordable prices compared to other brands of glue. Its packaging can replace several products due to the following qualities:

on condition of a smooth, even and grease-free surface, the glue is applied in a very thin layer, while its effectiveness does not decrease;
quickly sets, for this only 2–5 minutes is enough;
it will take less than an hour for the glue to dry completely, and the seam will become strong the next day.

Purpose and types

Titanium adhesive is versatile and can be used on a variety of surfaces.

For example, there is Titanium for Styrofoam, tile adhesive, Styrofoam adhesive and the like. The glue itself is multi-component. This material has excellent technical characteristics, including resistance to temperature extremes, not afraid of a humid environment, frost-resistant and so on.

Titanium universal adhesive is available in different forms:

Liquid Nails.
Glue-mastic.
Universal adhesive.

Let's consider all its features and properties.

Universal

Mainly used for gluing linoleum, wood, parquet, polyvinyl chloride, expanded polystyrene.

The glue itself is in a sealed package, which is squeezed out of it by means of a special dispenser. Once the material is dry, the seam is almost invisible.

It must be applied on a previously cleaned and prepared surface. Universal Titanium dries in the region of one hour. It is very popular for wall decoration with tiled material.

Glue-mastic

It is used for gluing materials with a wide variety of surfaces, for example, chipboard, fiberboard, drywall, wood, brick, gypsum, cement, concrete. Used for special ceiling tiles. Before using it, the composition must be thoroughly mixed.

Liquid Nails

Produced in small cans. The glue is squeezed out using a special construction gun. It is used for a variety of purposes. Operates at various temperature ranges.

It can be used both outside and inside the premises. Few things stick as well as this kind of Titan glue. So, it is used for gluing wood, PVC, polyurethane, ceramics and even metal on the street.

Specifications

Below, we will consider the technical characteristics of Titanium transparent glue.

Does not create any load on the surface to be coated.
Environmental friendliness.
Heat resistance up to + 100 ° С.
Minimum seam area.
Excellent viscosity.
Has excellent adhesion to various surfaces.
Versatility.
Frost resistant.
A waterproof seam is created.

To perform this or that work, the correct selection of the titanium adhesive is required. One of the demanded ones is polyurethane. They can glue glass and plastic surfaces. It dries quickly and has good viscosity.

Due to this, it is convenient to use it when gluing material to the ceiling. Unlike its counterparts, it has a rather pungent odor. Therefore, when working with it, the room must be well ventilated.

Advice! When gluing a particular surface, drafts are not recommended. This can adversely affect the quality of adhesion and the drying process of the compound.

It dries very quickly. This eliminates the likelihood of peeling off the surface and displacement of the material to the side. Before using it, it is best to read the instructions from the manufacturer.

This is important, because the recommendation for use should include expanded polystyrene or polystyrene, if they are not there, then remember that some formulations have solvents. Their presence will provoke deformation and corrosion of plastic.

Therefore, Titanium tile adhesive can be used. With this composition, you can glue the ceiling tiles without much difficulty.

It is especially practical to use it if the glue accidentally stains the glued material. Use diluted solvent to remove it from the ceiling. The use of this composition dissolves the glue and even stains and marks are completely removed.

The popular in Russia glue Titan - Titan Wild (not to be confused with the Tytan brand of another manufacturer) is produced in a wide range of products, depending on its specialization. Please note that there are fakes for this glue on the market

Titan adhesive is a good all-round adhesive for construction work.

Clay Titan (Titan): technical characteristics

The adhesive has excellent adhesion to many building surfaces. It interacts perfectly with concrete, gypsum, plaster surfaces, PVC, plastic, linoleum, parquet, ceramics, wood, MDF, leather, glass, paper, fabric and carpet. The glue adheres perfectly to surfaces at all temperatures, is resistant to mechanical stress and UV radiation. The adhesive has good water and heat resistance.

The glue is suitable for indoor and outdoor use, does not lose performance in a wide temperature range from -30 to +60 degrees, quickly sets, has excellent elasticity, after drying it does not exfoliate and does not become brittle. The glue is environmentally friendly, safe, does not contain toxic solvents.

You need to know that Titan glue has many types that differ in their specialization.

Types of glue Titan (Titan)

Titanium universal adhesive: The technical characteristics of this popular adhesive include high resistance to heat and moisture. It is a polymer adhesive that forms a transparent seam when glued.

Its drying time is 30-40 minutes. For work, glue must be applied to a clean and dry surface to be glued, leave for 2-3 minutes to dry and connect. Porous surfaces must be treated 2 times. When mixed with denatured alcohol, the glue can be used as a primer.

Adhesive-mastic Titanium styrofoam intended for gluing products from expanded polystyrene and polyurethane. It adheres well to concrete, cement-lime, gypsum, plaster surfaces, brick, wood, plasterboard, plywood, fiberboard and chipboard. Ideal for leveling surfaces and gluing ceiling tiles. The glue is mixed during application. it is applied with a narrow spatula on the tile with nine points. The tile must be attached to the ceiling, slightly displaced by a couple of cm and pressed. Grips within 20 seconds, the position of the product can be corrected within 3 seconds. Dries completely in 12 hours.

Titanium Liquid Nails glues metal, ceramics, PVC, wood, polyurethanes.The white paste has a high setting speed. The glue is available in cans with ears for use with a mounting gun, applied in dotted lines or in stripes, glued with a clamp.