Denture fixation cream

Operating rules

Compliance with the rules of use helps to reduce the likelihood of damage to the prosthesis. These include the following:

The removable structure is cleaned twice a day with a special brush with paste. It is also recommended to cleanse after meals whenever possible.
If the bridge of the structure bursts or the artificial tooth itself is cracked, it is immediately repaired so that the condition of the product does not deteriorate.
When the product is displaced in the oral cavity, the position is corrected or a new design is installed. Displacement can occur at any time due to loosening of the fixing components.

2> How to glue a tooth

If there is a breakdown of the artificial tooth or the base of the structure, you can repair them at home yourself. For this, special compositions "Corakril" and "Protakril-M" are suitable. They are cold-cured medical grade plastics in the form of a white powder.

Add warm water to the glue powder according to the instructions. This is usually a 2: 1 ratio.
Mix thoroughly, use a toothbrush for convenience.
Leave the solution for 3–7 minutes, it should ripen. Then stir again. The composition should be glossy and homogeneous, without grains and delamination.
Rinse and dry broken parts.

Sprinkle with an alcohol-based solution from a spray bottle and dry again.
Apply adhesive to damaged surfaces with a metal medical spatula.
Connect the elements together, press firmly and fix for 5-10 minutes.
Remove excess glue immediately, until the solution has set, with a spatula.
Leave the cement mass to dry completely for 3-4 hours.

7 best creams for fixing dentures

June 16, 2016 Last revised: December 5, 2019 Prosthetics

Today the assortment of dentures is quite large. Each of the available products is distinguished by its reliability, aesthetic appearance and methods of fixation.

For dentures to be able to perform their function and be no different from real teeth, correct fixation of dentures is necessary. This can be achieved by choosing the right denture adhesive.

Thanks to these products, it is possible to create an elastic layer between the gum and artificial teeth. Thus, a reliable anchorage in the oral cavity is created.

Denture adhesive: features of use

The main role of the adhesive is to fix removable dental structures to the alveolar bone. In this case, the prosthesis itself can be made of nylon or plastic. The glue can be used alone or in combination with other fasteners.

But this application is not the only one. The adhesive can be used to fix permanent structures for a specified time. For example, the cement underneath a crown fixed on the frontal side suddenly collapsed.

If you can't go to the dentist right away, you can take the glue for fixing removable dentures and fix the crown with it.

In addition, the glue for fixing dentures performs such secondary functions as freshens breath and guarantees a pleasant aroma from the mouth. Thanks to reliable fixation, a person is completely confident in the reliability of the prosthesis and feels much more comfortable.

The use of glue allows you to avoid rubbing the gums and the development of inflammation, which often occurs due to a loose fit of the structure.

With fixing glue, you can be sure that food residues will not fall under the denture, because the space between it and the gum is filled with a fixing compound.

Adhesive selection criteria

When choosing the right denture adhesive for his patient, the dentist takes into account the specifics of the oral cavity and his experience. But no one bothers the patient to choose the right product for himself. The production of glue takes place in three variations:

liquid;
medium viscosity;
viscous.

The liquid formulation has a higher flow rate. But it is very convenient to use this tool at the very first stages of wearing prostheses. It will take a long time to fix the structure, so everything goes to a cream of a more viscous consistency.

Glue is applied to the structure in strips. There should be 3 or 4. After attaching the prosthesis, the glue begins to spread evenly. If a person uses a prosthesis for the first time and has not yet had time to get used to it, then his perception of taste is distorted. Dentists recommend that you first abandon the flavored glue, so as not to aggravate the situation.

According to the manufacturers of fixing agents, the hitching time is 12 or 24 hours. But this time does not imply the influence of other factors, since food intake, the chemical composition of food and laughter. If we refer to practice, then the total duration of wearing a denture using glue is 9 hours. Qualitative characteristics for each manufacturer are different.

Review of effective remedies

On the shelves in the pharmacy today, the range of fixing compounds for dentures is very huge. In order to somehow facilitate the choice of a suitable cream, let us dwell in more detail on popular manufacturers.

Fittident

Fittident is not suitable for patients with hypersensitivity. During its application, it can cause a tingling and burning sensation in the gums. To eliminate discomfort, it is worth waiting for the glue to dry a little on the structure itself, and only then fix it.

The benefits of the product include:

after removal, there are no traces of glue on the gums;
there is no pronounced taste;
secure fixation is achieved.

The cons of the glue are as follows:

viscous consistency;
it is necessary to distribute glue only on a dry structure;
high availability.

Lakalut

This product was developed by German specialists. Differs in high quality, allows you to get a reliable fixation for 24 hours. After application, a thin layer is formed between the mucous membrane and the prosthesis, which serves as a reliable protection against chafing and the development of inflammation.

The advantages of the product include:

pleasant aroma smack;
reliable fixation;
protection of the mucous membrane from rubbing.

The disadvantages include:

high price;
when drinking hot drinks and food, the fixation weakens.

Varieties and composition of adhesives

There are many types of denture adhesive on the market today.

Korega

This medical cream is packaged in tubes with a comfortable tip. The composition contains a number of components - gum, zinc. There is also paraffin in the product. Also the substance includes petrolatum. These components do not have a negative effect on the human body. There are different types of glue on sale - strong hold or refreshing.

The use of Korega cream ensures a strong attachment of prostheses in the mouth for a day. This avoids food getting under the prosthesis and reduces the likelihood of inflammation. The advantages of the product include an affordable price, ease of use, the ability to apply to wet surfaces. In this case, the substance also has certain disadvantages. It is easily washed off with water. After prolonged use, the composition provokes swelling of the mucous membranes. In addition, the cream dissolves with food and drink. As a result, the prosthesis falls out of the mouth.

Lacalut

This composition is considered the development of German specialists. It is characterized by high quality and strong fixation, which lasts a day.After applying the substance, a thin layer forms between the mucous membranes and the prosthesis. It protects against chafing and inflammation.

The advantages of the cream include a pleasant smell and taste, strong fixation, protection of the oral cavity from rubbing. The disadvantages of the composition are the high cost and deterioration of fixation due to the use of hot products.

Fittydent

The product should not be used in patients with hypersensitivity. When the substance is applied, tingling and burning sensation occurs in the gums. To prevent discomfort, it is recommended to wait until the glue on the prosthesis dries and then fix it.

The advantages of the product include the absence of a clear taste, strong fixation. After removal, there are no traces of glue on the gums. In this case, the substance has disadvantages. These include too viscous texture, the need to apply the composition exclusively to a dry prosthesis.

Protefix

The cream provides a good attachment of the dentures, which lasts 10-12 hours. The composition is considered very popular because it combines several positive properties. These include high efficiency, excellent fixation, lack of pronounced taste and aroma.

Mint

This tool is used at the stage of adaptation to prostheses. The main element of the substance is mint essential oil, which helps to reduce the gag reflex. When using the composition, it is possible to improve the trophism of the gums and soothe the inflamed tissues. The substance has hypoallergenic properties. It contains no coloring additives and fragrances.

With aloe

This substance is suitable for people who suffer from irritation or swelling of the mucous membranes of the oral cavity. The use of the composition prevents the appearance of problems, normalizes metabolic processes, restores soft tissues.

Hypoallergenic

This composition is suitable for people who are prone to allergies. There are no dyes or fragrances in the cream. This minimizes the risk of negative reactions.

The president

After using the substance, a dense film forms on the surface of the prosthesis. It prevents food from entering under the denture. The product contains aromatic components and petroleum jelly. Hot food provokes a weakening of fixation.

The key advantages of the substance include reliable fixation and an affordable price. The tube contains 10 ml more cream compared to analogues. At the same time, there are certain disadvantages. The composition is characterized by a specific aroma. Also, the disadvantage is the weakening of fixation after eating.

Forest balm

The tool is used for different prostheses - full or partial. After applying the substance, it is possible to obtain a reliable fixation even when eating. The base of the product is a complex of natural ingredients. Contains chamomile and rosehip oil. These substances deal with inflammation. The tube of cream has a narrow spout, which makes it easier to apply the composition.

This product is manufactured in Russia. Its use provides a secure fit for 12 hours. The use of the substance is acceptable for removable dentures. The cream is economical in consumption. A tube of substance is enough for a couple of months. The product does not contain dyes and provides fresh breath.

Recommendations for the selection and use of dental glue

The following tips are highlighted:

When choosing a dental fixation prosthesis, one should be guided not only by one's own feelings, but also by the recommendations of the attending physician. For example, the choice of glue can be influenced by the characteristics of the material from which the base of the system is made, the structure of the jaws or chronic diseases;
Any composition can cause allergies. Before long-term use, it is necessary to carry out an allergy test;
When adapting to artificial teeth, choose products without fragrances. This will avoid additional irritation to the gums;
Use the same brand of cleaning and care products for the removable systems as the adhesive.
Apply glue only to a clean structure;
If the denture is still in place by the evening, do not remove it. Use less glue next time;
After installation, do not eat or drink for 20 minutes.

We advise you to watch the video review:

Is it possible to use Superglue?

Is Superglue suitable for these purposes? Some patients consider it to be the best means for fixation, but doctors do not share this opinion. And this is due to some reasons.

In "Superglue" there are industrial components that not only fix the quality of dentures, but also lead to a strong toxic effect. As a result, a person can get food poisoning or allergies. This tool does not have the required viscosity, so it cannot penetrate the chips on the tooth. This effect leads to new breakdowns and other disadvantages.

There is a big difference between the indicators of the material of the crown and the physical properties of "Superglue", therefore, the use of such a tool violates the integrity of the structure. Often people do not process the bonding area before applying the product, which leads to the appearance of harmful microorganisms, which leads to inflammation.

Instructions for the use of Korega gel

Before applying Corega cream, it is first desirable to clarify with which types of dentures it can be used. It works best with nylon inserts and plastic prostheses.

In order for the effect of Korega gel to meet all expectations and show its adhesion qualities, you need to know the rules for its use. It is also advisable to coordinate its use with an orthopedic dentist who was involved in prosthetics.

Fixation

Correctly glue the prosthesis with Corega as follows:

The orthopedic structure on which the product will be applied must be clean and dry. To effectively clean the dentures, the manufacturer has provided appropriate tablets for deeper cleansing and removal of pathogenic microorganisms, which must be dissolved in a container with water and the removable elements are lowered there.
In a small amount, apply the cream in the form of strips up to 6 mm long on the inserts, but not too close to its edges. The application diagram is shown on the package. The best option is to place the cream in the recesses of the removable elements. On upper prostheses, it is allowed to apply to protruding areas that are attached to the palate. At the first application, it is necessary to make a minimum number of strips, and taking into account personal feelings, you can increase or decrease them. The main thing is that when using Corega cream and inserts, there is no discomfort in the oral cavity.
After preparing the prostheses, it is recommended to rinse the oral cavity with clean water to create conditions for better fixation of the prostheses.
Once the inserts are correctly positioned in their specific locations, they must be pressed well for a few seconds.
If there is excess cream that has squeezed out on the sides of the dentures, then it must be removed with an oiled napkin.
Upon completion of all procedures, the tube with the cream should be tightly closed. Store the fixing cream for inserts out of the reach of children and at room temperature.

For information! In the process of applying ointment to plug-in structures, it is important to ensure that moisture does not get into the tube. When interacting with water, the product loses its adhesion properties .. Instructions for use of the glue on the package

Instructions for the use of glue on the packaging

Withdrawal

Withdrawal procedure:

Rinse your mouth with warm, clean water.
Using a gentle and gentle rocking motion, detach the removable elements from the gums.
Use a soft-bristled brush and warm water to clean the surface of the inserts from cream and food residues; if necessary, use the cleaning accessories.

How often and for how long can you use it?

Corega cream can be applied once throughout the day. One tube with a volume of 40 g is designed for 21 days, if the consumption during this time is slightly higher, this indicates the need to adjust the insert structure.

Detach the removable elements from the gums using a gentle and gentle rocking motion

Dental technician repair methods

When contacting a specialist, the repair method is determined after examining the damaged dental structure. To eliminate the defect, the use of specialized equipment and additional materials may be required. Each of the repair methods considered below has certain nuances of implementation and requires a professional approach.

Filling with plastic

To fill a crack in a prosthesis, dental technicians consistently perform a number of actions. Including:

Before shaping the product, the surface is degreased with a monomer. The damaged area is then filled with molten plastic and the material is manually leveled.
To ensure an even finish, dentists often use dental instruments with differently shaped thin bases.
The surface of the plastic is covered with a moistened cellophane plate and placed in a dental press to fix the material.
If there is excess plastic, they are cut along the border of the product.
The structure is placed in a polymerizer that provides slow heating, boiling and cooling. This method of polymerization reliably bonds the plastic to the base and has a positive effect on the final quality.

Dental resin

With the help of dental resin, the damaged area is built up. The specialist selects a composite material of a suitable shade and applies it to the place of a chip or crack. Resin build-up is convenient for chipping a small piece of the denture.

Wax

The wax is intended for modeling facets, crowns and other parts of fixed dentures. The composition for working with dental products is created on the basis of paraffin, natural resin and natural wax. The advantages of the material include:

low heat shrinkage;
ash content up to 0.02%;
easy modeling with dental instruments;
formation of dry and non-viscous chips.

Laser welding

The laser solderless welding process creates a tear-resistant bead with improved twist, displacement and bending characteristics compared to a solder bead. The technology excludes the occurrence of cracks and deformation of the product, ensuring high precision of adhesion of individual parts.

Single tooth restoration

Artistic restoration of an individual tooth is a set of measures that help eliminate aesthetic errors. The result of the restoration is a change in the irregular shape of the teeth, correction of their position, filling the interdental space, and a change in the shade of the enamel. After restoring the tooth, you can partially or completely get rid of the prosthesis.

In case of fracture of the clasp or fastening lock

Clasp systems and fastening locks mechanically hold the dentures in one place, preventing displacement. The breakdown of one of the parts requires a complete replacement, since broken small mechanisms are rarely repairable.

What glue is right

Dental constructions can be restored using adhesive solutions. For this purpose, special compositions have been developed that differ from simple glue.

Pharmacy products

The standard option for repairing dental products is to use a pharmacy product.This category includes several types of glue, so you should familiarize yourself with their characteristics before buying.

"Protacril"

"Protacryl" is produced in the form of a powder-liquid and, after mixing the components, turns into a self-hardening mass. The use of Protakril glue improves the physical and mechanical properties of the prosthesis and prolongs their service life. The color of the composition mimics natural fabrics.

"Redont"

Transparent glue "Redont" adheres well to the base material and dries quickly after application. By combining "Redont" with concentrates and dye, it is possible to give the solution the required shade.

"Coracril"

Cold-curing acrylic plastic "Coracryl" is used to fill cracks and build up damaged structures. The substance is distinguished by increased indifference to biological objects, since after drying, there is practically no monomer in the mass.

R.O.C.S

A joint development of Swiss and Russian manufacturers is used to fix dentures. When interacting with liquid, the composition hardens in 10-15 seconds and forms an airtight layer between the prosthesis and the gum. The use of the solution allows you to painlessly consume cold and hot food, without fear of damage to the dental structure.

"The Rocks"

Rox glue reliably fixes the prosthesis for 12 hours, preventing inflammation of the palate and gums. The constant use of the composition allows you to protect the prosthesis from external influences. The presence of minty ingredients ensures fresh breath throughout the day.

"Lakalut"

The substance of the Lakalut brand with a creamy consistency provides strong fixation without affecting the bite and taste of food. A significant advantage of Lacalut cream is to protect the gums from inflammation. After applying the composition, it fills the space under the product, which prevents the risk of food particles entering there. The formed elastic layer fixes the removable structure for a day.

Fittident

The Fittident glue, created on a water-insoluble basis, fixes the product for 10-12 hours. The presence of the substance gives a sense of the natural presence of the prosthesis during communication and eating.

"Protefix"

It is recommended to choose the fixing adhesive "Protefix" for people with increased salivation. When applied, the substance forms a protective layer that lasts for 12 hours and prevents food from getting under the installed prosthesis.

"Korega"

Means "Korega" creates a soft and elastic layer on the surface of the denture to protect it from food. Depending on your own wishes, you can purchase the composition in the form of adhesive strips, cream, powder or gel. Korega glue fixes the removable structure in the oral cavity for 24 hours.

Using super glue

Having noticed damage to the denture, many people think about using ordinary superglue as a means to restore. Despite the fact that superglue is able to firmly connect parts of the dental structure, it has a toxic effect on the body.

What formulations can not be used

To repair dentures, you need to use only specialized compounds that do not harm dental structures. Household and industrial adhesives do not have the desired characteristics and negatively affect the human body.

Popular remedies

There are a lot of dental crowns available in dental stores. There are many manufacturers, and many of them produce reliable products. How to glue a dental crown at home? The best types of adhesives are:

The Rocks. The tool is produced in Russia, performing fixation for 12 hours. The glue is economical, since one tube is consumed within 1.5-2 months. Since there are no harmful dyes in it, it is considered completely safe.
"Forest balsam".It is used in the dental field to secure both removable and partially removable dentures. With this glue, high-quality fastening of the crowns during chewing is ensured. The composition contains rosehip and chamomile, which prevent inflammation. The tube is designed so that the glue is conveniently applied to the desired surface.
"Lakalut". High-quality fixing agent produced by a German manufacturer. Compared to competitors, this product fixes dentures for a day. Once fixed, the prosthesis cannot fall off during chewing or talking.
"The president". This product is available in almost all dental stores and pharmacies. Vaseline and various fragrances were used in the manufacture, so if the crowns were installed recently, it is undesirable to use such a tool. Fixation is weakened by eating hot food.
Fittident. With strong sensitivity, this glue should not be used, since its application can lead to unpleasant sensations in the gums. To correct problems after application, wait before fixing the structure.
Protefix. For dentures, it is an effective tool that reliably fixes crowns for up to 12 hours. The composition contains mint, aloe, due to which the glue is hypoallergenic.
Korega. When creating the glue, petrolatum, zinc, paraffin were used. The combination of these components ensures maximum fixation of the prosthesis without negative effects on the body. There are several types of products from this manufacturer. Among them are refreshing and glue for strong hold.

These are not all the means for fixing dental crowns, there are over 30 of them. You need to know all the features of each means in order to choose the most suitable option.

Causes and types of prosthesis breakage

There are many reasons for the breakdown of artificial structures:

Dentist mistakes during preparatory work. An incorrectly taken dental impression leads to the manufacture of an unsuitable denture.
In case the dental technician uses a low-quality metal alloy or acrylic plastic (in which air bubbles are visible), the denture will most likely not last long.
Errors made in the laboratory manufacturing process. The slightest mistake will lead to an incorrect distribution of the chewing load on the teeth or a loose fit of the structure.
Carelessness in care and wearing. Falling, using an unsuitable solution, insufficient or irregular hygiene, improper fixation or removal of the structure.
Physiological changes in the jaw. Over time, changes in the structure of the alveolar processes may occur, which will entail a loose fit of the base.
Worn out or end of life. Each material has a certain service life. After its expiration, the quality characteristics of materials fall, the prosthesis becomes fragile and unreliable.

The main types of breakdowns:

breakage of the fixation system;
fracture of the acrylic or nylon base;
cracks and chips on the crowns;
falling off of artificial teeth;
delamination of the material or component;
unexplained discomfort while wearing;
color change.

Corega glue instructions for denture users

How to use Korega glue? There are certain rules for this. They must be observed! Only in this case, the prosthesis will be fixed firmly, and the user will feel comfortable without feeling any discomfort.

Bonded dentures

Before applying the adhesive, follow the instructions:

Tidy up your mouth. Clean it up using a soft toothbrush from food debris and rinse with water.

Take care of cleaning the denture from plaque, remaining food particles and glue. You can use a brush specially designed for this purpose and Korega tablets dissolved in water. After such maintenance, rinse and dry the structure well.
Then follow in accordance with the schematic image (instructions) on the package. On the top of the prosthesis, the adhesive can be dashed or dotted onto the protruding space that attaches to the palate. On the bottom, draw 3 thin lines with glue or walk along the ledge in small dotted lines, slightly stepping back from the edge. Increase or decrease the amount of cream applied as needed. Everyone decides this empirically.
Place the upper part in the mouth first, press lightly. Then gently insert the lower teeth, align and squeeze the jaws. Remove the remains of the cream with a swab.

Recommendation! Do not eat or drink for about 20 minutes! So the fixation will be more successful and you will have no problems all day.

Removing the denture won't be a hassle for you. Just follow these steps: first, rinse your mouth thoroughly with water, then loosen your jaw with calm, measured movements. They will come off easily. As a last resort, press down on them from the side of your cheeks. If that doesn't work, leave it overnight. In the morning they will definitely come off easily, because the glue will dissolve overnight with the help of saliva.

Advice! Keep the glue tightly sealed at room temperature.

Korega pills - what are they?

Korega tablets containing active ingredients are used for cleaning and disinfection of orthopedic structures. The tool allows you to eliminate food residues in hard-to-reach places where mechanical cleaning is powerless.

Subject to regular use of tablets, prolongation of the service life of the products is guaranteed, as well as the preservation of the original color of the prosthesis.

In addition, the drug helps to reduce irritation of the oral mucosa when wearing a removable product.

Before using Corega tablets, you should start cleaning the denture from plaque and food debris. Then the structure must be dipped into a solution with the medicine (one tablet of the drug dissolves in one glass of warm water).

Leave the false teeth in the composition for 15 minutes to cleanse. If there is a need to sterilize the product, we leave it in the solution overnight. After completing the "removable smile" procedure, rinse under running water and dry. The drug should not be used to process orthopedic structures directly in the oral cavity.

The product is available in a package of 30 pieces. The average price for pills in the country ranges from 230 to 250 rubles.

How to glue a denture at home

Crowns are made of plastic or more durable, reliable materials. Before you figure out what glue a denture in the usual home conditions, it is worth considering: this is a temporary measure, and the result obtained is dubious and short-lived. As soon as necessary, the bridge must be referred to the master. Home repair is also possible, it involves the use of wax and the following recommendations:

Removable structures first need to be slightly heated to melt the wax, and then carefully remove from the model of the prosthesis.
The plaster protrusions for fixing the crowns must acquire a conical shape under the influence of heat, so certain physical efforts have to be made.
After gluing, it is necessary to process the scales with sandpaper, and then firmly fix the crowns on the main model corresponding to the size range of teeth.
After making sure of the correct location, it's time to take the wax and glue the individual parts of the breakage with it.

It is important not to overdo it with a viscous composition.
After you managed to glue the breakdown, you need to let it dry completely at home, do not wear it for a while. After trying on, file off excess wax.

You can buy a special glue designed to fix breakage at home.Such manipulations are short-lived, so it is worth spending money and performing high-quality repairs, trusting the skillful hands of the master and spending a pre-agreed price. If something is done wrong at home, a successful restoration is no longer possible.

What are dentures?

It is not uncommon for older people to experience dental problems. Losing teeth is very unpleasant. Modern medicine offers the installation of dental implants. There are many advantages in this method of restoring the dentition. But implantation is a surgical operation and has some contraindications. In such situations, patients are forced to resort to full or partial prosthetics. Removable prosthetics are a cheaper alternative to implantation. Full removable dentures are installed when there are no teeth. Partial removable dentures are placed if several teeth remain in the jaw. Sometimes it happens that, due to trauma or other life circumstances, quite young people have to go to an orthopedist. Dentures have been successfully used in dentistry for a long time. Various modern materials are used for their manufacture. Depending on this, prostheses are nylon, clasp, acrylic. They can be fixed using clasps, attachments, that is, locks or glue for fixing. There are practically no contraindications for removable partial prosthetics. The quality of modern orthodontic appliances is excellent. They are inexpensive, therefore they are very popular among the population.

How to repair yourself

How to repair a denture at home depends on the type of damage. After inspecting the product and finding a defect, you must follow the corresponding repair instructions.

Fracture or crack in the base of the structure

Cracking and fracture of the prosthesis are the most common problems. To solve them, perform the following actions:

Collect the debris of the product into a single structure to make sure that it is possible to independently restore the integrity of the structure.
The selected composition is applied to the damaged area and the prosthesis is glued. This gluing will not be finishing and is required for subsequent plaster casting.
The plaster is formed into the desired shape, and when it hardens, the denture is removed for separation along the gluing line.
At the site of the cleavage, the top layer is gently polished without touching the area in contact with the oral mucosa.
Acrylic plastic is applied to the treated area and the space between the parts of the structure is filled.
Final grinding is carried out, the surface is polished and the product is washed under water.

Clasp breakage

In the event of a clasp breakage, it is necessary to take an impression of the abutment tooth together with the prosthesis. It will not be possible to make a new clasp on your own, so the impression is transferred to the laboratory, where the specialist carries out all the work.

Spalling of an artificial tooth

If a fragment breaks off from the inserted crown, the restoration is performed using composite materials. The elastic mass is applied to the prosthesis and formed before hardening. For convenience, it is recommended to use dental instruments to model the crown with high precision.

Impaired fixation of the prosthesis

Inaccurate correction and attempts to self-grind the prosthesis often lead to a violation of its fixation. Since the product is not firmly fixed, there is a risk of displacement even without strong external influences. If fixation is disturbed, it is better to use professional help by contacting a dental technician.

Abutment tooth extraction

The use of a bridge version of the prosthesis requires a strong grinding of the abutment tooth, since the crown is attached to it. If you need to remove the abutment tooth, you need to contact your dentist, since the procedure is performed using specialized instruments. After removal, a new prosthesis is made and installed.

What to do if the bridge burst

The broken bridge on the prosthesis is restored with glue. The mass is applied to the damaged area and the crack is filled with a composite material. If a repeated defect forms, it is recommended to partially replace the structure.