The best kitchen sinks according to the advice of experts in 2019

type of instalation

In stores, you will find several common types of sinks:

Overhead

They are mounted on a separate kitchen cabinet. This is the simplest washing option. Pros: great for modular furniture, can be installed on your own.

Mortise

Such sinks are installed in the countertop itself, for which a hole of the appropriate size is preliminarily prepared in it. The inset sink protrudes above the work surface. Can be installed in any type of worktop, regardless of the type of material of manufacture.

Integrated

Only specialists are engaged in their installation. The peculiarity of such a sink is that it is built into the worktop in such a way that a single working area is formed. At the same time, the edges of the product are carefully processed and fit tightly to the surface of the countertop. This eliminates the formation of puddles of water, moisture penetration under the countertop, sink.

Best inexpensive kitchen sinks

Low-cost sinks are made of stainless steel and artificial materials. Their affordable price is due to more limited functionality, reduced wall thickness. At the same time, among them there are many worthy models with good characteristics.

Merkana 23 M-105

5

★★★★★
editorial estimate

97%
buyers recommend this product

The kitchen sink has an irregular shape and is suitable for corner installation. It is made of artificial granite, therefore it is highly durable and resistant to damage.

The model is equipped with two bowls - main and auxiliary. On both sides there are wings for drying and defrosting food, as well as for temporary storage of dishes or detergents.

Advantages:

• Two bowls and two wings;
• Corner installation;
• High strength.

Disadvantages:

Large dimensions.

Kitchen sink Merkana 23 M-105 has optimal performance. It is not easy to find composite plumbing fixtures with such functionality in the budget segment.

GranFest Smart GF-SM435

4.9

★★★★★
editorial estimate

93%
buyers recommend this product

The model is made of reconstituted marble, has a round shape and is suitable for cutting into a table top. The kitchen sink is available in three colors: sand, beige and white.

Thanks to the factory tap hole located in the upper part of the bowl, the sink is practical and easy to install. It has a compact size and is suitable for a cabinet with a width of only 45 cm.

Advantages:

• Compactness;
• 3 colors;
• Low noise;
• Finished tap hole.

Disadvantages:

Gets dirty quickly.

Despite the fact that washing requires the use of household chemicals for cleaning, it can be called quite practical. For a small kitchen, this model is just perfect, thanks to its compact dimensions and a depth of 16 cm.

Fabia 50 × 60 (m00007)

4.7

★★★★★
editorial estimate

84%
buyers recommend this product

The surface-mounted kitchen sink is made of stainless steel with a wall thickness of 0.4 mm. The model has a standard rectangular shape. Ease of use is provided by a wing with a raised surface for draining water, allowing you to dry a small amount of dishes on it or defrost food.

The sink has standard dimensions, its width is 60 cm. The depth of the bowl is quite convenient (16 cm) and can hold a large amount of dishes.

Advantages:

• Comfortable depth;
• The presence of a wide wing;
• Simple installation;
• Standard dimensions.

Disadvantages:

Noisy.

The Fabia m00007 sink will fit most kitchens. A budget and practical solution for a rented apartment.

LEX Lugano 480

4.5

★★★★★
editorial estimate

81%
buyers recommend this product

This kitchen sink is made of polymer, so it is lightweight and has a low noise level from running water. Outwardly, it resembles models made of natural stone, while being much cheaper.

But you need to understand that the sink is prone to scratching and does not tolerate contact with hot dishes, but with careful care it can last for more than a dozen years due to the presence of quartz sand in the composite.

The plumbing has a factory hole for the installation of a kitchen faucet. The bowl has a round shape and is available in 5 colors: black, chocolate, white, gray and beige.

Advantages:

• Low noise;
• Variety of designs;
• Tap hole;
• A light weight.

Disadvantages:

Susceptible to mechanical damage.

The Lugano 480 from LEX is a compact and attractive kitchen sink.

The best premium kitchen sinks

Reliable, durable and practical sinks, made of the best quality materials, justifiably have a high cost. They are comfortable and functional, while being able to become a real decoration of the kitchen.

Blanco Axia III XL 6S

5

★★★★★
editorial estimate

98%
buyers recommend this product

Axia is a complete collection of kitchen sinks made of artificial granite. The line includes models equipped with a glass or wooden cutting board, as well as a valve with an automatic system. The color solutions of the collection allow you to choose an option for every taste: sinks in white, black, gray, brown and other shades.

The sink has one large bowl and an additional smaller one. A wide wing is also provided in the design. The model has a dirt-repellent and antibacterial coating, resistant to scratches and cracks.

Advantages:

• Variety of shades;
• Two bowls;
• High strength;
• Hygienic thanks to a special coating;
• Cutting board included;
• Automatic valve.

Disadvantages:

Large dimensions - 100x51 cm.

Stylish, functional and durable sinks Blanco Axia III XL 6S will not cause any problems and will perfectly fit into any kitchen interior, making it stylish and modern.

Omoikiri Mogami

5

★★★★★
editorial estimate

97%
buyers recommend this product

The round kitchen sink is made of copper and has a protective brass coating that makes it highly durable. It does not lose its original qualities for a long time. The walls of the bowl are strong and durable, as they are 1.2 cm thick.

The sink is made in a vintage style with a turtle-like surface texture. It is made by hand, which gives it a special authenticity. Omoikiri Mogami is suitable for inset and under-counter installation. The kit includes an outlet and an overflow.

Advantages:

• Spectacular design;
• Thick bowl walls;
• Resistant to damage;
• Outlet and overflow included;
• Universal installation.

Disadvantages:

No wing.

The copper kitchen sink is designed for comfort and style in classic, ethnic or antique style kitchens.

Villeroy & Boch Subway 678002

4.9

★★★★★
editorial estimate

95%
buyers recommend this product

The square-shaped sink for the kitchen is made of ceramics - a material that is durable and resistant to mechanical damage. Plumbing is virtually silent, easy to clean and not prone to streak from hard water.

The sink has two bowls and 3 pre-drilled holes for the installation of plumbing fixtures. The kit includes a drain with an eccentric. The model is produced in one color - ivory.

Advantages:

• The presence of an additional bowl;
• Silence;
• Strong walls;
• Holes for plumbing;
• Eccentric drain.

Disadvantages:

Only one color.

The Subway sink from Villeroy & Boch will fit perfectly in modern kitchens.

Franke BWX 220-54-27 TL

4.8

★★★★★
editorial estimate

92%
buyers recommend this product

The rectangular kitchen sink is made of stainless steel.It has won two awards for design and functionality. The model has a spacious and deep bowl with a designer plate on the drain. The patented fixing system allows the fixture to be installed above or flush with the worktop.

But the main advantage of the sink is its equipment. It comes with two cutting boards, three knives and a knife holder, a bowl and a colander for drying fruits and vegetables.

Advantages:

• Two ways to install;
• Design issue;
• Colander over the second bowl;
• Rich equipment;
• Pneumatic drain open / close system.

Disadvantages:

Noisy - like all metal sinks.

The Franke BWX sink is a bargain for a spacious kitchen and saves on additional utensils.

Installation methods

The method of installing the bowl depends on the type of construction. As a rule, the installation method is indicated in the instructions supplied as standard.

Overhead

Overhead washbasins are installed on a cut-out in the headset and cover it instead of the countertop. The operation of an overhead sink is not possible without a kitchen cabinet, since they are assembled into a single structure in the interior. On the front and sides, surface-mounted sinks are equipped with bumpers for fixing to the cabinet. The back has a raised edge to restrict water from draining to the floor.

Cut-in method

Flush sinks protrude above the workspace and are installed directly into the countertop. For installation on a tabletop, a hole is pre-cut.

Under table

Undercounter bowls are placed below the level of the countertop. This installation method ensures ease of use and hygiene while washing dishes. Such sinks look aesthetically pleasing, but differ in increased cost.

Integrated sink

A distinctive feature of the integrated sink is seamless integration into the worktop. As a rule, this type is purchased together with a kitchen set and is made to order.

How to choose a mixer

A kitchen faucet works with a heavy load, so it must be reliable, sturdy and durable. In addition, it should be in harmony with the sink and overall kitchen design. What to choose:

1. Construction:

• from 2 valves;
• single-lever;
• contactless.

A mixer with 2 taps is used in kitchens with a retro and classic design. The most popular is single-lever, the most expensive and most economical of all is contactless.

1. Material:

• bronze, brass;
• steel;
• ceramics;
• granite;
• silumin.

Silumin mixers are cheap and short-lived. The faucet is made of granite and is used with a stone sink. Bronze and brass mixers are durable, elegant, more expensive than steel and ceramic products.

1. Spout size. The water jet must enter the center of the sink. The height of the tap depends on the depth of the bowl: for shallow - higher, deep - lower.
2. Spout shape. Depending on your preference.
3. Additional features:

• rotation angle - 140/180 degrees;
• retractable hose;
• water filtration system;
• switch for dishwasher, washing machine.

Stainless steel or stone?

It is usually difficult to decide which is better: a stainless steel kitchen sink or a stone sink. Let's first talk about the advantages of each type. Stainless steel is not afraid of shock loads, it washes well, it is used for a long time. Stone kitchen sinks are quiet, can be of different colors, a wider range of shapes.

To decide which sink is better for the kitchen - made of artificial stone or stainless steel, you need to know the pros and cons of both materials

Now about the disadvantages. Stainless steel: noisy, there are only two options for "colors", polished is scratched and it is unrealistic to remove scratches. With a high salt content in the water, stains remain on the polished surface. So, to make the sink look neat, you need to take care of it. Inexpensive sinks made of stone chips require careful handling: scratches and chips may appear.Some - light - can turn yellow or darken over time. Cleaning can solve the problem, but it can be unnerving. If the content of stone chips or quartz is low, the artificial stone sink may be afraid of high temperatures. So that you don't care, just make sure the quality of the product is normal.

How critical are chips and scratches on granite sinks

You should not drop something heavy in them. No, nothing will come from a dropped cup or plate. The dishes will break, and the sink will most likely remain as it was. A small chip may appear - it depends on how and where it falls. But if you drop a heavy saucepan or frying pan, you can expect a chip with a high probability.

Choice of color is very important when creating an interior.

The good news is that scratches can be sanded down. To do this, sometimes the abrasive part of the sponge is enough, sometimes it is necessary to take sandpaper with a fine grain. The degree of sanding depends on the quality of the material from which the sink is made. If the composition is colored in the mass (the dye is added before molding), it can be sanded to any depth.

Black sink on black countertop - this was not possible before

Chips on granite, quartz and other composite sinks are also easy to remove. Most of the firms have "repair kits". It is a pigment in the form of a powder and a polymer binder. By mixing a certain amount, you get a repair composition. It is applied to the place of the chip, after drying it is sanded. Often, the former chip then needs to be searched for a long time and you may not find it.

Hood selection

The hood can be either a design element (for example, in the loft style) or invisible, hidden behind the facade.

When choosing a kitchen hood, you need to decide what will be:

1. Air purification principle. There are 2 main options and an intermediate one. The first is flow ventilation through the air duct. The second is using forced ventilation and indoor filters. It is possible to use 2 types of filter: from grease, soot and odor.
2. Location:

• wall;
• island;
• angular.

The first two options are placed above the hob. Island hood is an element of kitchen design.

1. Design. By type of installation, kitchen models are additionally subdivided into:

• inconspicuous - hidden (for modular kitchens), telescopic;
• visible - domed, flat, box-shaped.

Management depends on the cost of furniture: mechanical, electronic / touch.

Which sink for the kitchen to choose

Housewives for the most part spend a lot of time in the kitchen - so that washing dishes and preparing food does not seem like hard labor, the sink must be in harmony in the interior and look attractive.

In addition, it should be roomy and comfortable:

1. A corner device made of stainless steel or composite stone with an additional compartment and a wing will fit well into a small room.

2. For an average room, a good option: a mortise or overhead product consisting of 2 bowls and 2 wings - the material of manufacture is the same. An alternative could be a white faience model installed by a large window.

3. For large areas, the integrated stone version against the wall or the round version in the middle is suitable.

4. A young family who prefers high-tech style will look good and use a glass and steel device.

5. For antiquity lovers, a copper or brass bowl with a mixer, for example, from Omoikiri, is perfect.

Review of popular manufacturers

In addition to the basic requirements for the choice, it is worth considering the manufacturing company. Several brands have established themselves in the market and are valued for their high product quality standards.

Blanco

Due to innovative solutions, Bianco products allow you to competently organize your workspace. Materials such as granite, stainless steel and ceramics are used to make sinks. The manufacturer focuses on the use of new design concepts and high quality of finished products.

LONGRAN

Longran washbasins are designed for those who value functionality and practicality. The product line includes many models that can decorate the interior.

Elleci

When creating Elleci sinks, composite materials are used that have increased resistance to external influences. Products retain their original appearance for a long time.

Franke

The products of the German brand Franke are created from a unique material that contains polymer components that ensure a long service life and resistance to external influences. Also, the manufacturer produces more budget models made of stainless steel.

Alveus

Alveus kitchen sinks are made from sustainable materials in various variations. The surfaces of the sinks are resistant to aggressive substances and high temperatures.

Granula

Granula products are made from natural granite. High performance is achieved through the use of modern equipment from foreign manufacturers.

Iddis

Iddis sinks are resistant to rust and temperature extremes. Customers can choose from various configurations, which are made of durable materials.

Florentina

In the production of sanitary ware, the Florentina company uses composite materials. The use of modern materials provides an increased strength indicator. The products are also appreciated for their original design solutions and European style.

Melana

Melana sinks belong to the economy segment. Despite the affordable cost, many models are durable and long-lasting.

Granfest

Granfest washbasins are produced using the vibrocasting method, which makes it possible to obtain designs of any shape and size. Moreover, the products have unusual geometric proportions.

Teka

Teka sinks are made in various variations - from traditional style to unique and unusual solutions. Modern technologies are used in production, which allows achieving high quality.

Zorg

All varieties of Zorg sinks are distinguished by high-quality assembly and a variety of design solutions. A wide range of products allows you to make a choice, taking into account any preference.

Omoikiri

The manufacturer Omoikiri strives to make sinks simple and easy to use, without neglecting the strength of the structures. The design of the products of the Japanese brand harmoniously complements the classic interior of the kitchen.

Schock

Elegant sinks from Schock are made of high-strength materials. The main characteristic of the products is modern European design. Washbasins can be integrated into almost any interior, creating an unusual accent.

The form

Sinks come in different shapes. This criterion is significant not so much from a practical point of view as from a design point of view.

For kitchens in the style of "country", "modern" or "classic" round stone sinks are appropriate. This ceramic product will become a vintage decoration of a room in a retro style.

• Round stainless steel sinks look great in high-tech style.
• oval sinks - an option for all occasions. Depending on the material, they will fit into any kitchen style.
• square and rectangular sinks also belong to the category of “universal soldiers”. They will support both classic and modern styles.
• corner sinks made of composite are suitable for kitchens in the style of "Provence", "country", and stainless steel - for "high-tech" or "modern". Such models save kitchen space, therefore they are often used in small kitchens.

Mounting method

There are three ways to install a sink in a countertop:

• Mortise. This is when a bowl-shaped cutout is made in the countertop, a sink is inserted into it. It is held by the sides, although there are additional fasteners.
  Methods for installing a kitchen sink in a countertop
• Under-table mounting. Sinks that are attached to the bottom of the countertop. The cutout in the table top is made strictly according to the size of the bowl.Moreover, the cut must be edged or sanded if the countertop is made of artificial stone.
  Under-counter washbasin
• Flush with the worktop. Only certain types of sinks are installed in this way. In principle, you can put a regular sink, but for this you have to mill a groove in the countertop. And this will have to be done very accurately.

It is necessary to choose the method of installation in the countertop even before deciding on the model - for each installation there are its own versions, its own fasteners that come with the sink.

What are the most practical kitchen sinks?

If the owners of the renovated real estate are constrained in the budget, it is recommended to give preference to stainless steel sinks. She looks great in any headset and interior concept. An alternative option is to buy porcelain stoneware plumbing, but with one section. The price will be approximately the same.

Auxiliary elements will significantly expand the capabilities of the structures.

The middle price range includes granite sinks, as well as artificial stone, metal sinks with two bowls and additional components. The more expensive range is represented by natural and artificial stone sinks, ceramics and professional stainless steel options.

The choice should take into account the size of the kitchen and kitchen furniture.

As you can see, there are anti-corrosion metal sinks in each price range. Such devices are easy to choose for any room, they are practical and multifunctional.

It is recommended to make purchases in trusted stores, online stores of official dealers.

Choosing a sink in the kitchen is a responsible process, because the hostesses spend a lot of time in this room. Comfort, wishes and quality should come first

The parameters sounded above will help to facilitate the selection of this important piece of furniture.

Correctly selected sinks delight their owners with beauty and ease of maintenance.

How to complement the sink in the kitchen?

An indispensable element of an ideal sink is a wing or dryer. It can be located only on one side of the sink or on both sides of it. Its function is to serve as a stand for dishes, food or hot pots and pans.

The modern sink in the kitchen is a real work center, which includes many additional accessories. They can be sold with a sink. In this case, they are guaranteed to match it in design and technical parameters. However, you can pick them up yourself.

Manufacturers of kitchen sinks often supplement them with waste shredders, grater sets, baskets for washing and drying vegetables and fruits, soap dispensers, as well as cutting boards, the shape of which follows the contours of the sink. All these devices make the life of the hostess a lot easier and save precious working space in the kitchen.

Types of materials

How to choose the right sink for the kitchen so that it fully meets all the needs of the owners? An important place here is occupied by the correct choice of material from which the product was made. We list the most popular materials from which modern kitchen sinks are made

Let's list the most popular materials from which modern kitchen sinks are made.

Stainless steel

This material is the most popular and has an acceptable cost. For the manufacture of sinks, steel is used, which contains 18% chromium. The composition also contains 10% nickel. The thickness of the steel can be between 0.9 and 1.2 mm. The surface can be matte or glossy, or anti-graphic. The latter option is the most preferable, since such a surface well hides traces of water and various scratches.

Standard single bowl stainless steel sink

The main advantages of such a sink:

• environmental friendliness.Stainless steel is a safe food material;
• resistance to very high temperatures, corrosion and acid. She is not afraid of any solvents and aggressive substances;
• easy care is provided;
• goes well with any kitchen furniture;
• durability;
• has a low cost. It depends on the size of the sink, the thickness of the metal, the availability of accessories and the specific manufacturer.

Disadvantages:

• too noisy. To eliminate this drawback, special gaskets are placed under the sink;
• if the surface is glossy, then over time it can become covered with small scratches, losing its original appearance.

A natural stone

Such products are made from granite, onyx, marble and other materials. They are among the most expensive options, therefore they are used relatively rarely.

Stone sink

Their main advantages:

• beauty and unique design;
• high degree of sound absorption;
• durability;
• impact strength, resistance to mechanical stress;
• the choice of material, color and design.

Disadvantages:

• significant weight;
• the need for special care;
• very high cost.

Ceramics

Porcelain or earthenware products are covered with a layer of enamel, which performs protective functions. Porcelain products are more expensive than earthenware, but they are also much stronger.

Ceramic kitchen sink

Advantages of ceramics:

• wide range of colors;
• scratch resistance;
• the ability to successfully withstand the effects of high temperatures;
• they need minimal care.

Disadvantages:

• too fragile. If a heavy object falls into the sink, cracks may occur;
• heavy weight;
• the complexity of self-installation.

Composite material

Such products are 80% made of natural stone chips, and 20% - of a binder polymer composition.

Artificial stone sink

The composite has the following advantages:

• it perfectly absorbs the sound of flowing water;
• there is a choice of any color option;
• the durability of the material is several decades;
• he is not afraid of high temperatures. It easily withstands 280 degrees;
• does not require maintenance.

Among the disadvantages are high weight and high cost.