Criteria for choosing a mattress for a double bed, the best manufacturers

Mattress hardness

Another important aspect that must be taken into account is the stiffness of the berth. Due to it, the mattress will acquire the shape that will provide the best option for supporting the spine. Previously it was believed that the tougher the mattress, the better and better it is. But this is not entirely true. The firmness of the mattress must be selected in accordance with the specific anatomical features of the person. For example, those with a fragile physique should not sleep on a hard mattress. But for strong and knocked down people, this option will be ideal, while a soft one is contraindicated.

How to choose the firmness of the mattress

In general, soft mattresses are the best option for elderly people with pain in the lumbar region, low body weight (up to 65 kg). Medium products are advised to be purchased by active people or people who are faced with problems in the thoracic spine, with a body weight of 65-100 kg. Very hard mattresses are suitable for obese (over 100 kg) and small children.

Mattress hardness selection table

You can also buy double-sided mattresses, which will be the best solution for those who do not know how hard to buy a product. On one side they are softer, on the other - hard. There are also combined mattresses - they have several areas with different hardness. This is the most expensive option and is orthopedic. There are combined products, where one side is tougher than the other - the option is suitable for those couples where the husband is much larger than his wife's dimensions, or vice versa.

There are also combined mattresses

Varieties

Manufacturers offer 2 types of mattresses for a double bed. Spring-loaded ones have special blocks inside. In others, the springs are replaced with dense layers of filler. Both types have advantages and disadvantages to use.

Spring loaded

Springs support the human body during sleep better than fillers. But over time, the mattress toppers wear out, and the springs come out, causing injury.

With dependent spring block

Mattresses with box springs connected to each other have been popular for over 60 years. Cylinder-shaped or cone-shaped springs are strong because they are made from cold-drawn wire.

The disadvantage is that, bending under the weight of a person, the springs begin to pop out, breaking through the mattress topper.

With independent spring block

In this design, each spring is enclosed in a block, so that when pressed, they do not affect each other. There will be no creaks, and you can turn over as much as you like. The orthopedic effect of independent spring units is high. They support the spine in the correct position without bending. Different mattresses have from 220 to 1000 springs of different diameters per square meter of surface. The level of anatomical effect increases with the number of spring blocks.

Springless

Lightweight mattresses are mattresses with various fillings, in which there are no metal frames inside. But there are products that are tough, when the filler is used in them natural and glued in layers. You can safely buy such mattresses for the matrimonial bed. It is comfortable to sleep on them at first. But then the products lose their original shape, so they have to be changed more often than spring structures.

Mattress fillers

The basis, although important, is far from the only component of an orthopedic mattress. What fillers can be and how to choose a mattress, taking into account their different properties? From the filler, as well as from the frame, its elasticity, durability and ability to withstand loads will depend. There are models in which only natural or synthetic materials are used, but more often products with combined fillers are produced.

Naturalness in everything

Not only the comfort from using the mattress and its durability are very important, but also the material of the filler. Today, many types of fillers are known, but natural ones remain the most popular.There are several types of them:

1. Of this group, latex obtained from rubber is mainly used. The lightweight, porous material has excellent hygienic and anti-decubitus properties and is capable of handling over 100 kg. For example, a mattress from the manufacturer Ascona London model withstands a load of up to 140 kg. Latex bases are suitable for people with allergies and, with proper care, retain their properties for at least 10-15 years.
2. An innovative type of latex is viscolatex, such as in the Ascona Fitness Leader mattress, which, in addition to its basic properties, has a memory effect. From the point of view of the repetition of the shape of the body of the person lying on it and, consequently, the comfort of sleep, this material is almost ideal and is well suited for those suffering from a hernia of the spine.
3. Another popular filler is coconut coir or coconut linen. Both are made from coconut. For a hard coir, a fiber steamed with natural latex is used, and for a soft and voluminous canvas, a walnut peel is used, a fabric is used as a base. Coconut coir with a thickness of 1 to 3 cm is usually used to create super-hard orthopedic mattresses, such as the Ascona Fitness Formula. Both materials are distinguished by good air permeability, resistance to deformation and retain their properties for a long time, are well suited for people with scoliosis, especially when it comes to a teenager, but they have no anti-decubitus effect. You should not choose them even with a hernia of the spine.
4. As for fillers such as sisal, linen, merino wool, horsehair or felt, their main purpose is to dissipate static electricity, regulate the level of heat and moisture, and ensure a good level of air exchange.

Modern synthetics

How to choose a mattress for a bed with synthetic filling? First of all, do not think that if the material is of non-natural origin, then it will certainly cause allergies, irritation and, in general, harmful.

Modern synthetics, especially used in the manufacture of products for young children and adolescents, are of such high quality that sometimes they surpass natural materials in terms of safety. Most often, buyers stop their choice on these types of synthetic fillers:

1. The most popular of this series is holofiber - a hypoallergenic, lightweight fabric based on polyester fibers intertwined in a special way. In terms of its characteristics, this filler is similar to high-quality cotton or down, but it is able to maintain airiness and softness much longer than its natural counterparts. As for safety, it is holofiber, as an easy-care material that is not susceptible to infection by microorganisms and the accumulation of moisture. It is used in various products for pregnant women, newborns and people with chronic diseases, especially when it comes to bedridden patients.
2. A close relative of holofiber, periotec, has similar properties. The main difference between this material is its higher wear resistance. Some varieties of perioteca can be produced with the addition of natural wool or cotton fibers.
3. However, the most popular among lovers of comfortable sleep are materials with a shape memory effect. They can be called differently, but in essence they are foam made of synthetic fibers that can perfectly adapt to the anatomical features of a person. In addition to relieving tension in the spine and muscles, this filler provides an optimal anti-decubitus effect. An example of such a material is the Memorix filler used in the Ascona Orma Memorix springless mattress.

Types of mattresses

Mattresses can be divided into spring and non-spring mattresses.

Spring mattresses with independent and dependent springs

In mattresses with independent springs, each spring is insulated and does not come into contact with its neighbors. This design feature prevents the appearance of the "hammock effect", in which there is a sagging of the spinal column. In models with dependent spring blocks, pressing one of the springs also affects the adjacent ones. The number of springs per square meter can be up to 256, 500 and 1000.

Mattresses with independent spring units, placed in fabric covers, perfectly adapt to the anatomical shape of the body.

Without springs

In springless mattresses, the perception of the load from lying bodies completely falls on the filler. Hence the increased requirements for their characteristics. Especially for elasticity and resilience, the ability to quickly recover from deformation

When choosing a mattress, pay special attention to whether the filler in question meets the necessary parameters

Polyurethane foam, struttofiber, latex, coconut coir and so on are used as fillers.

Bonnel

Bonnel is a "classic" spring block that has been in use for many decades. Withstands heavy loads, is durable and wear-resistant. Consists of rigidly coupled five-coil springs made of thick steel wire. The price is low. Not recommended for couples with large weight differences.

Bonnel mattress is a mattress with a dependent spring block inside, all structural elements of which are interconnected.

Important physical parameters of a person

Before buying a mattress, you need to consider some parameters of each of the spouses. After all, if only one person is comfortable sleeping, then the other will suffer from insomnia. There may be problems with the spine if you are guided in the acquisition of an attribute only by price or by a fashionable manufacturer.

Age

Young people need a solid surface to sleep in order for the spine to form properly. After 30 years, preference is given to soft options. And the elderly need orthopedic models.

The weight

Fat people need hard mattresses. If you weigh more than 90 kilograms, then soft surfaces will bend under the weight of the body.

Lifestyle

Physical activity leaves an imprint on a person's condition when the back needs relaxation during sleep. Only rigid structures are able to give the opportunity to fully relax.

Health status

For a sick person, a hard or medium hard mattress is suitable on the bed. If you have problems with the spine, then you need to think about buying an orthopedic structure. Patients with asthma or chronic inflammation of the respiratory system need a bed made of natural materials.

Factors to look out for

When buying a new mattress, you should pay attention to a number of physical parameters of a person.

Age. This parameter is one of the defining ones in the choice. Everyone knows that the first 25 years of life, the human body is in the growth phase. During this period of life, the body needs sufficient support for proper formation. The best option for this age group would be a firm or medium-firm mattress. The next quarter of a century passes for the body in a relatively calm mode. Therefore, in the absence of back problems, the mattress can be chosen based on your preferences. Having crossed the 50-year mark, the body needs special comfort and support

When choosing a mattress at this age, special attention should be paid to models with a high degree of anatomy.

User weight. No less influence on the choice of a mattress has a person's weight

A person in a weight category up to 90 kg can choose a mattress at his discretion. People in the 90+ category should give preference to models with increased rigidity.

Lifestyle features. The lifestyle of a person also affects the choice of bed.Athletes and people who experience physical activity on a daily basis should choose a hard mattress. For people with low physical activity, the anatomical index can be minimized.

Health complaints. It is also worth considering the physical condition of the person. If the user is experiencing back or cervical pain, a firm mattress is preferred.

Interesting: Consoles - luxurious inhabitants of palaces in modern interiors

One-sided and two-sided mattresses

Both spring and simple models can be equipped with one or two "working" sides, which can have different stiffness and heat transfer.

One-sided mattresses can be used only with the specified side up, and the second consists of layers of wear-resistant material that is not intended for healthy sleep. The advantage of most of these models is the low price and the absence of the need to periodically turn them over, the disadvantage is the insignificant service life. It is better to choose a mattress with one working side for beds that are located in guest bedrooms, for example, that is, are not intended for permanent use.

There are premium single-sided mattresses that can be quite thick (over 40 cm) and have the highest quality characteristics.

In the manufacture of double-sided mattresses, both surfaces are made suitable for sleeping. Depending on the thickness of the upper layers of the filler, they can have different degrees of hardness, be cold in summer and warm in winter.

Even if there are two sides with the same properties, the product must be turned over from time to time. This will allow the resting layers to straighten out, this practice will double the service life.

Filling

Fillers are important mandatory elements of any mattress (video). In spring models, they are located only above / below the spring block. And in springless products they are the basis.

In the first case, fillers allow you to control the hardness. Even when using one spring block, you can get a soft or hard sleeping place with different combinations of layers:

• Coconut Coir - 1-3 cm thick layer is obtained by combining coconut fiber and natural latex. The material is additionally treated with bactericidal impregnation. The filler is hygienic, breathable, environmentally friendly;
• Natural latex is obtained from the sap of a tropical rubber tree. Thanks to special technologies, the foam becomes resilient, elastic and ventilated. The high wear resistance of latex allows it to withstand severe loads without permanent deformation. In the manufacture of spring products, perforated sheets are used. Monolithic perforated blocks are placed in springless models. Latex is available in thicknesses of 2, 3, 5, 10, 14, 18 cm;
• Memolatex is also made from natural latex. A distinctive feature of the material is to repeat the shape of the body, due to which there is minimal pressure on the body and the microcirculation of blood vessels is improved. Material thickness - 2 cm;
• Memorix is ​​an artificial material (refers to polyurethane foams). The main advantages are the "memory" effect, strength, durability, thermal sensitivity. Layer thickness - 4 cm;
• Sisal belongs to natural materials and is created from sisal agave. The material is 1 cm thick and has excellent air permeability and anti-static properties.

Springless models are available with a thickness of 15-20 cm.To understand which mattress to choose for a double bed, you need to familiarize yourself with the basics / fillers:

• Polyurethane foam is an artificial material with a cellular structure (like a sponge). It is a safe material that is characterized by its lightness. Therefore, these mattresses are perfect for folding beds.They are produced with a monolithic block (approximately 16 cm high) or consist of several glued layers (each 3 cm thick);
• Latex materials usually contain more than 20-30% natural material. The most expensive models have 85% natural latex. Products are produced in two types - monolithic (height about 18 cm) and layered (usually three sheets of 6 cm thick are glued together). Latex is produced with holes and due to the change in their diameter, different rigidity is achieved in certain zones;
• Coira is coconut fiber impregnated with latex (typical ratio 50:50). A distinctive feature of the products is increased rigidity and high wear resistance. These mattresses contain several layers (3 cm thick). The most common model height is 13 cm.

Due to the different combination and alternation of canvases, products of varying degrees of rigidity and cost can be obtained.

Memolatex

Latex

Sisal

Coconut coir

Memorix

Classification of mattresses

To understand all the intricacies, you need to know the three main categories into which mattresses are divided:

• spring,
• springless,
• with orthopedic effect.

Each of them has its own advantages and disadvantages. Let's consider them in more detail.

Spring mattresses: pros and cons

Mattresses made using this technology have been popular for many years. But it is worth noting that there are two main subspecies in this category, the properties of which are very different.

Bonnell-type dependent spring units assume a connection between all areas of the mattress. So, by pressing on one area, you will certainly influence the neighboring ones. This approach is not very good for double beds, because there are usually two people on a large mattress. The movements of one in this case will be "wave" reflected on the second. In addition, the rolling effect observed with these mattresses also negatively affects the night's rest. "Bonnel" is pushed through and becomes unusable after several years of constant load. In addition, this type of mattress does not have different levels of firmness.

What are the advantages of this type? Low cost. It is for this reason that bonnel-type dependent spring blocks are still available in stores and are in demand among customers.

The independent spring blocks are designed differently. In such mattresses, each individual spring has its own shell, a cover that protects the spring. There is no connection between the springs, which significantly improves the properties of the mattress. Two people can comfortably sit on the surface and the movements of one will not be reflected in any way on the other. The point is that the impact on one spring does not affect springs from adjacent areas.

In addition, people may have different requirements for the firmness of the mattress. Independent spring blocks allow you not only to create mattresses with three levels of firmness, but also to combine them in one product. This property is especially true for couples who sleep in the same bed, but have different requirements for the firmness of the mattress. However, a person with problems with a specific area of ​​the spine can choose a mattress with the right combination of hard and soft zones.

It is worth paying attention to an important indicator - the number of springs per square meter. The higher the number, the better the mattress will keep its shape and support the spine.

Models with few springs will quickly deteriorate.

What are the disadvantages of this type of mattress? High cost and complexity of choice. To determine the required stiffness and thickness, you need to contact a specialist. And the production of independent spring mattresses is a complex process. Not everyone can afford such a mattress.

Springless mattresses: advantages and disadvantages

This type is distinguished by a simpler device: inside there is a filler (one or two types), which ensures the rigidity of the mattress.

Natural materials affect the cost of the final product, the price of such mattresses is high. But they will also serve for many years without losing their properties.

If the "filling" is artificial materials (holofiber, foam rubber or artificial latex), then the shelf life of such a mattress is limited to several years. However, the price for such models is not high.

Another advantage of springless mattresses is easy transportation. They are usually sold rolled up, so you can even transport the goods in a car.

Orthopedic mattresses

First of all, it should be noted that orthopedic mattresses cannot cure spinal diseases. They will not correct scoliosis or relieve osteochondrosis. But nevertheless, in the presence of these diseases (as well as on the recommendation of a doctor) mattresses with an orthopedic effect are a guarantee of the correct location of the spine, which in turn will have a positive effect on the level of health in general. What is their feature? These are the most common mattresses that (based on many factors) are ideal for a particular person. Health status, problems with muscles and spine, personal preferences are analyzed. An orthopedic mattress should support the spine in the correct position at night while the person is sleeping and not controlling the muscles. You can read more about choosing an orthopedic mattress in this article.

STEP 3 Choosing the size and height of the mattress

The comfort of rest largely depends on the height of the mattress. In addition, this factor is also important aesthetically. The thinnest are mattresses up to 14 cm thick, such mattresses are usually designed for children or infrequent seasonal use. Experts say that thin models can negatively affect health, harm the spine with a significant weight of the sleeper. For adults, the following height guidelines are suitable as the main mattress for constant use:

• When choosing a mattress for adults, you should select products with a thickness of 14-30 cm.
• If you buy a springless monolithic mattress, then its thickness can be 14-16cm minimum.
• High-quality mattresses with independent spring units are made at least 18-19 cm thick. Anything less is super-cheap options with thin filling.
• Manufacturers also offer models with multi-layer filling, which provides more convenience and comfort. Elite mattresses can have a thickness of 24 to 40 cm.
• The standard value for the height of an orthopedic mattress for an adult is a range of 19-23 cm.

When it comes to the size of a mattress with orthopedic properties, we are talking about its compliance with the base and / or the bed on which it will be placed:

• If the width of the mattress is greater than the width of the bed, then this will either lead to drooping of the edges and, as a result, uncomfortable sleep, or the mattress simply will not fit into the dimensions of the bed;
• If the mattress is smaller in width, then this will cause inconvenience during rest, inaccurate appearance of the bed;
• If the length is inappropriate, the same inconvenient picture will turn out, leading to discomfort or impossibility of operation.
• The most common sizes of mattresses for a single bed: 80x190, 80x200, 90x200 cm. For double sizes, 120x200, 140x200, 160x200 and 180x200 cm are considered standard. We recommend taking standard sizes - this will simplify the selection of furniture and accessories.
• If you measured the size of the mattress, and it turned out to be outside the standard values, you can always order a mattress in a non-standard size.

How to determine the optimal firmness of a mattress

For newborns from the first days of life. The first few months of its existence, the child is going through a stage of constant formation of the spine and the musculoskeletal system as a whole. Therefore, pediatricians recommend putting babies to sleep on the most rigid springless mattresses.

For children from 2 to 13 years old.During this period, the baby moves from a crib to a teenager. The mattress chosen for her should take into account the characteristics of the child's development and significant changes in his body weight over several years. For this purpose, models of medium rigidity, both spring and springless, are suitable.

For teenagers and young people under 25 years old. The formation of the spine lasts a quarter of a century. Therefore, it is undesirable to use soft mattresses for sleeping until the age of 25. Models of medium and high (if there are problems with excess weight) rigidity will be relevant.

For people from 25 to 50 years old. During this period of life, you can stop the choice on a mattress of any hardness, depending on personal preferences and weight category:

up to 55 kg - soft models without coconut coir or with a thick layer on top of it;

from 55 to 90 kg - mattresses of medium hardness

In this case, pay attention to the maximum permissible load for the selected model. If it is above 140 kg, the product will seem too dense and uncomfortable to sleep;

more than 90 kg - mattresses with the maximum hardness parameter

Here, models with a reinforced spring block or with a double layer of coconut coir will work well. If the mattress is used for sleeping by a couple, it is necessary to focus on the weight of the heavier partner.

People over 50 years old. Very hard mattresses are contraindicated for them - this can lead to serious problems with intervertebral discs. The optimal choice for them will be soft and medium-hard models.

For people with problems of the musculoskeletal system. If a person has diseases of the spine, you must first consult with your doctor. In each case, the selection of the mattress should be carried out individually. But there are general recommendations:

in the case of problems in the thoracic or cervical regions, models of medium hardness are suitable;

in the presence of diseases in the lumbar region, soft mattresses are most relevant;

for osteochondrosis and problems with posture, rigid models are recommended.

How to choose an orthopedic mattress for a double bed

When purchasing new bedroom furniture in a store, many of us are faced with an offer to buy a mattress. It will be difficult for an unprepared person to make a choice, and he will buy what the seller will offer him. Another option for spontaneous acquisition is when the mattress comes complete with a bedroom set. This product is generally inexpensive.

Orthopedic specimens are so called because they are able to take the shape of the human body and allow you to enjoy complete rest. An improperly selected mattress will cause back pain, make you wake up at night. It will be very difficult to fall asleep in such a sleeping place. If you need an orthopedic mattress, you need to study the details well, since the quality of sleep and your general well-being depend on it. The opportunity to buy a double bed with a mattress inexpensively is sometimes attractive, but we advise you to purchase the product separately according to strict parameters:

• consumer age;
• consumer weight;
• the condition of the spine and skeleton;
• a person's way of life.

Rigidity

The dependence on the age of the buyer is due to the fact that up to 27 years old a person continues to grow and needs a hard sleeping place, and after 50 years a softer copy will be better for the buyer.

During sleep, the spine should be straight.

There are three types of product rigidity:

• as hard as possible;
• average;
• soft.

In the absence of health problems, the issue of choice can be solved simply: purchase an option, focusing on age. Any convenient specimen is selected for persons from 27 to 50 years old. People who are professionally involved in sports are advised to sleep on a hard bed. Also, the increased rigidity of the mattress is recommended for everyone whose weight significantly exceeds the norm and is close to 100 kg.

Another thing is when a person suffers from problems with the spine.Unfortunately, today this is a common reason for going to the doctor. The choice of a mattress is completely trusted by a professional. The doctor should advise on what type of product to choose. You may need to choose a combined model with varying degrees of rigidity.

The wrong mattress will create a lot of problems.

It is not uncommon for a doctor to recommend products with varying degrees of rigidity to a husband and wife. In this case, taking into account the size of the bed, two copies are purchased.

The size

It is not only the length and width of the model for a double bed that matters, but also its height. The most important quality of a mattress is convenience and comfort for a person who is resting. In this case, size matters. A married couple should not interfere with each other in a dream.

A table of standard sizes for double beds is shown below:

The height of the mattress varies from 3 to 50 cm and depends on the inner filling and the type of model. Mattresses that are too low are uncomfortable.

Stores can offer both standard sizes and unusual ones.

Excipients

Earlier we talked about modern fillers. They are all divided into two types:

• natural;
• synthetic.

For allergy sufferers, it is important that the product does not cause allergies. Natural include:

• latex;
• wool fiber;
• felt;
• coconut fiber;
• batting;
• seaweed.

A variety of internal fillers allows you to create high-quality products with a low cost

All of these fillers have worked well, they do not accumulate static electricity, do not cause allergies. The only disadvantage of natural materials is their high cost. Manufacturers around the world are working to create lightweight, durable and inexpensive man-made materials. Today for the production of mattresses are used:

• polypropylene;
• polyurethane foam;
• struttofiber.

Each buyer can easily select the material that suits him. For those who want to save money, we recommend choosing products with artificial filler.

Outer cover

The outer coating of the product is also important. Since the service life is estimated at several years, it is necessary that it has strength, elasticity, and a beautiful appearance.

Most often, manufacturers use jacquard. It consists of a proportion of cotton and artificial polyester. Jacquard with a high cotton content is used in the manufacture of luxury mattresses. Thick fabric is breathable.

In addition to its positive qualities, jacquard has a beautiful pattern.

Teak is also widely used, but this fabric works well for delicate items. It is pleasant to the touch and does not cause allergic reactions.