Is it possible to narrow shoes at home

Half insoles

In terms of functionality, the half insoles resemble earbuds, but they have a completely different shape. In fact, they are insoles that take up half of the inner part of the sole. When inserted into the shoes, they take up a small space, which is enough for the foot to not fly out of the shoe.

Half insoles can be leather, suede or silicone. Particularly popular are orthopedic models, which not only reduce shoe size, but also maintain the correct position of the feet and prevent diseases of the musculoskeletal system, flat feet.

In order not to be mistaken with the selection of half insoles, it is better to go to the store with the pair of shoes that you need to adjust and buy the device only after trying on.

Ways to reduce shoe size

Additional insoles

Insert into a large pair of shoes an additional insole (and, if necessary, two), which should be selected depending on the type of shoe that needs to be adjusted in size: foam, synthetic or woolen. If you insert additional insoles into sneakers, then you will also get a shock-absorbing effect, and lovers of ballet flats will like this shoe accessory due to the fact that the soles will be reliably protected from chafing.

Grandfather's method

If the shoe fits your volume, but is slightly long in length, you can use the old proven method: push a soft cloth or cotton wool into the socks of your shoes. Plain paper is fine for this, but it should be very soft to prevent rubbing with your fingers.

Unfortunately, this simple and reliable method only applies to closed toe shoes. The size of fashionable summer models with cutouts above the thumb and open sandals cannot be adjusted in this way.

Compression from temperature differences

Thoroughly wet the inside of the shoe, using a spray bottle with water for this purpose, and put it to dry close to the radiator or heater. Almost any shoe will shrink from such a sharp temperature drop, but there is a high probability that the beautiful surface of the product will deteriorate. This "harmful" technique should be used only in those cases when you are ready for completely unexpected results.

An even more risky option: put on shoes that have become too loose, and lower your feet into a basin filled with water. Sit in this state for a short time, and then place the shoes on the radiator or dry them.

Silicone tabs

In the windows of shoe stores, you can often find small-sized silicone liners designed for different types of shoes. Their shape and size should be chosen depending on where they will be placed in the future. The direct purpose of such liners is to prevent chafing and slipping, but they can also be used in our case - to fill empty spaces, thereby reducing the size of the shoe.

Very often, models showing clothes on the catwalk suffer from mismatch in shoe sizes. For them, big shoes are a real disaster, since they have to move around in such shoes on the catwalk. It turns out that the models have their own secret: you just need to stick a good quality double-sided tape on the inside of the shoe sole. Thus, shoes or sandals stick to bare feet and will not fly off while walking.

Method for reducing leather shoes

You can reduce the size of leather shoes and slightly narrow their socks by holding them for a short time in a basin of hot water, after dissolving the washing powder in it. Then the shoes must be dried in the sun or near heating appliances.To make the skin easier to endure such an extreme procedure, already dry and narrowed shoes need to be sprinkled with a special product for and walk around the house a little in them. This will soften the skin a little and will fit perfectly on the leg.

Reducing summer shoes in the workshop

Shrinking shoes such as flip-flops, clogs, and open-toed sandals should be done by professionals. In the workshop, thin straps will be neatly separated from the sole and slightly shortened, or perhaps simply sewn closer to the middle. Shoes after such simple manipulations will sit much more tightly on the leg.

You shouldn't try to implement this method at home. For sewing thick soles, you need a special machine, which it makes no sense for you to buy, but for a shoemaker it is always at hand. Of course, you can try at home not to sew, but to glue the straps of the top of the product to its sole, but even the best glue cannot guarantee the required durability and strength.

For some, this is only a way to protect their feet from the negative effects of the environment, for some it is a technique for self-expression, and for a number of consumers it is an indicator of the owner's status. And all this is about one thing - about shoes. Moreover, men and women of different ages at least once, but faced with the fact that the purchase of a beautiful pair has already been made, but it is impossible to wear: the size is large. So what can you do? Return to the store (and if you bought it hand-held, then what?) Let's choose the latter and see if we can reduce the volume and size. Moreover, sometimes the shoes just wear out and get big, so the first two solutions certainly won't work.

3 How to reduce the size of boots

Natural leather tends to stretch when exposed to moisture. Don't throw your boots away if they are stretched out. You can try to "plant" natural material. The skin is known to shrink as it dries. It is this quality that should be used to reduce the size.

For this operation, you will need a household hairdryer, a paraffin candle, a piece of soft cloth, and old newspapers.

Procedure:

  1. 1. Shape the shoe by stuffing it with crumpled newspapers, not too tightly.
  2. 2. Rub the toe of a boot or boot with plenty of dry paraffin.
  3. 3. Warm up with a hair dryer evenly until the paraffin is completely absorbed.
  4. 4. Remove excess paraffin with a cloth.
  5. 5. Allow the boot to cool.
  6. 6. Try it on. If necessary, you can repeat the process several times.

It is important to ensure that the skin tightens evenly. For natural suede and nubuck, paraffin and any other oily liquids must not be used.

For natural suede and nubuck, paraffin and any other oily liquids should not be used.

You can also reduce the size of natural suede shoes by using a hairdryer. The sides of the product must be moistened with water and heated until completely dry.

Right 14 days

New, unsuitable shoes can be returned within 2 weeks from the date of purchase.

According to current legislation, you can return shoes that did not fit in size or for other reasons within 14 days from the date of purchase. But at the same time, the product must comply with a number of parameters:

  • be without signs of wearing outdoors or indoors;
  • have a marketable appearance (that is, without creases, abrasions, etc.);
  • be in the original configuration (that is, in a box, with heels, insoles, etc., which was in stock at the time of purchase).

For the correct registration of the return (or exchange, if there is such an opportunity), the buyer must provide a sales receipt (or a copy of it), a warranty card for shoes and a passport.

2 Inserts

For summer shoes, boots and athletic shoes, you can use heel liners. Made of silicone and other wear-resistant materials, they are comfortable and durable.You can buy them at a shoe store. According to the instructions, the backs are installed in place of the shoe pocket. If necessary, you can fix them with glue and quickly change when worn.

Similar devices can be made at home. You will need some old leather, scissors and glue with a brush.

Work algorithm:

  1. 1. Make the main pattern on paper. This can be done by wrapping the heel of the shoe with a sheet and making notes with a pencil.
  2. 2. Check the accuracy on the inside of the heel.
  3. 3. To set the required thickness, cut out several pieces of leather on the pattern. Each next pair should be 2-3 mm less than the previous one along the perimeter.
  4. 4. Smear the cut out parts with glue - from larger to smaller.
  5. 5. Assemble each liner, checking thickness regularly.
  6. 6. Lubricate the leather insert and the inner part of the heel of the shoes with a thin layer of glue and install in place.

The liner should be facing the bottom of the leg. This will protect the skin from excessive chafing and calluses.

You can use shoes in a day. By varying the thickness of the liner, the shoe size can be made smaller by the whole size.

Water and steam

Grandma's cardinal method, which is both effective and dangerous, is to soak and then dry suede shoes.

The method is quite simple: first you need to wet a pair of shoes with cold water from a spray bottle or with a damp cloth, then send it to dry on a battery, put it near the heater or use a hair dryer. From this effect, the suede is deformed and, after drying, will noticeably decrease.

A side effect is a change in the look of the suede. Shoes can become less saturated, lose their appeal, and become dull. To return to her not the same, but at least some elegance, after drying, you should wipe the outside of the shoes with a cotton pad dipped in glycerin.

The problem of wearing out suede shoes has a place to be and it can be solved in fairly simple ways, without leaving your home. If these methods do not help, you should contact a repair shop, where professionals will reduce the size of the shoe without causing any harm to it. And although this method will cost a lot of money, you can be sure that the shoes will remain beautiful as before.

How to sew boots at home

How to sew boots in the bootleg

Is it possible to suture boots at home

How to sew boots at home
14 simple and effective ways to reduce shoe size

Spray stretcher for shoes made of patent leather
If the boots are too long, the old but effective method is worth remembering. Putting on socks, they are filled with soft napkins, medical cotton or very thin paper, but of course for sandals or open shoes, this option is unacceptable.

How to sew boots at home

Well, do not throw it away ... How to reduce the size of shoes using special devices?

In order not to harm your feet when wearing larger shoes, you need to "fit" it to yourself. For this, there are special "reducers" that can reduce shoes to one and a half sizes.

Full heel protection for sports shoes: minus size 0.5

You ordered a great running shoe from overseas, but you missed the size and got a half size larger shoe. At the very first run, it turned out that the heel in the brand new sneakers was “shaking”.

Instead of exchanging an item for another and again waiting for the package to arrive, or trying to get a refund, you can simply glue these liners into the heel of your sneakers.

They will "eat up" empty space and will cushion when playing sports.

Absorbent pads to shrink athletic shoes by 3mm

If sneakers or sneakers do not fit you in size, the heel in them will "dangle", and the heel of the shoe will rub the heel area. There is a way out - these are soft foam pads. They will reduce the size of the shoe and prevent it from chafing on the leather.

Super absorbent sock inserts for athletic shoes: minus size 1

Did the store mistakenly sell you a size larger sneaker? Dont be upset! Just place these inserts in the toe of the shoe, and then the foot will stop sliding into the toe of the sneaker, and the heel will "dangle".

Set for fashion shoes "toe + heel": minus size 1.5

If your favorite leather shoes were getting worn out and began to fall off your feet, do not rush to say goodbye to them. This kit can help you. The silicone socks together with the heel insert will shrink the shoe by an entire size so you can continue to wear it.

Genuine leather heel pads to reduce classic shoes by 4 mm

Do you like high heel shoes, but the heel flies out of them every now and then? No problem! These leather inserts will delicately hold the heel in the shoe and will not let it "break out" out.

Inlays in model shoes without slipping in stockings: minus 3-4 mm

Force majeure is an unacceptable phenomenon at important events. Imagine that in preparation for a wedding, anniversary or prom, you rushed and bought a little more shoes than you need. You don't have to drop everything and rush to the store to exchange a pair of shoes. It is enough to glue these tabs into the heel, and you can continue to prepare for the celebration.

Elastic inserts with adjustable thickness in the toe of model shoes: minus 1-2 sizes

The thickness of these inserts can be adjusted by inserting and removing the inner elements. Therefore, they will save you if your legs are swollen in the evening and suffer in shoes that were in time for you in the morning. The products are very easy to slide in and out of the shoe, so it won't be difficult for you to take them out of the sock as soon as you feel that there is almost no space left.

Soft protectors to reduce the rise of the shoe by 2-3 mm

Have you seen this picture: a girl walks on the sidewalk in open-toed shoes, and her toes “spank” on the asphalt? To avoid repeating this mistake, wear these protectors with open-toed shoes. Dense silicone will fix the foot in the toe of the shoe and prevent your toes from falling out.

Orthopedic pads for model shoes "minus 1 size"

These pads are not put on the foot, but are inserted under the sole of its toe. You can't see them at all with your foot! And they also seem to support the foot from below and prevent it from sliding forward, which means that in shoes with an open toe, your toes will not "pop out" out.

Massage half insoles to reduce the rise of fashion shoes by 3 mm

In open shoes, and in particular in sandals, leather straps and constrictions can stretch during the process of wearing. Then the leg begins to "fall" forward and crawl from the sole when walking. These half insoles will help you prevent this from happening. They will reduce the instep of the shoe by 3 mm and fix the foot in it.

Cloth socks to reduce open shoes by 2-3 mm, with fixation on the foot

Have you ever worn sandals or sandals in the heat? If so, you will remember how a wet foot "wiggles" along the sole of the shoe.

These socks will fix the foot, because they have a non-slip coating and a thick pad, which will raise the foot and prevent it from "squeezing" between the strap and the insole.

And they will not fall off your feet or slip out, because they have an invisible, but reliable fastening.

Useful Tips

If, for some reason, the pair could not be taken to the workshop or the shoemaker did not take up work, then recommendations for reducing shoes at home will help. To begin with, you need to understand exactly what parameters it does not fit, length, width or rise, and only then get to work. You also need to consider what material it is made of.

How to reduce the size of boots

When exposed to moisture, the skin is able to stretch. Even the size of the purchased boots after a while can become too big. The leather shrinks as it dries, this property will help reduce the size and fullness of the boots.You can pull off the scattered shoes at home with a candle made of paraffin and a hair dryer; you will need a piece of soft material and paper as consumables.

Algorithm of actions:

  1. Boots need to be shaped, for this they are stuffed with newspaper or paper.
  2. Rub socks with paraffin.
  3. Turn on the hair dryer and warm up until the paraffin is completely absorbed.
  4. Remove wax residues with a cloth.
  5. After cooling down, try on the boots, if there is a need to seat them even more, you need to repeat the procedure.

How to shrink suede shoes

Suede, like leather, shrinks when exposed to temperatures, but the result can be unpredictable. It is possible that a pair of shoes will lose their beauty. Therefore, in order to narrow or reduce the size of suede shoes, it is better to turn to a master. But you can try to seat them yourself. To do this, in turn, the products must be held over the steam, and then put into the freezer. In the case of lacquered shoes or boots, it is also better to turn to the master.

How to reduce the size of a sneaker or trainer

In sports shoes, an additional insole is most often placed and laced tightly, if this does not help, cotton or soft fabric is placed in the sock. Fabric products can be washed in water at a temperature of 60-90 degrees, but you need to take into account the quality of the fabric, it can shed. The fabric will shrink a little when washed, but when worn, the sneakers will return to their previous shape.

How to reduce the size of sandals

Reducing the size of summer leather shoes is a little more difficult. After all, it is mostly open and the inserts will draw attention to themselves. You can shorten the straps to reduce frayed sandals. In the case of expensive shoes, it is better to contact a qualified craftsman, but many people prefer to deal with the problem on their own.

To reduce the length of the straps you will need:

  • sharpened scissors;
  • screwdriver;
  • high quality glue;
  • brush;
  • hair dryer with high power;
  • sandpaper;

Regular straps without patterns and decorations - cut on one side. If they have any decorative elements, the length is reduced on both sides. To begin with, using a screwdriver, the strap is separated from the sole and insole. Use sandpaper to remove the glue from the sole and straps. The required length is measured, and a small amount of glue is applied to the places where the sole and straps are glued with a brush. Wait 20 minutes and apply another layer of glue. After that, a hair dryer heats the surfaces on which the glue is applied and install the straps in place, pressing firmly.

On a note!

The method is suitable for sandals made of any materials.

How to narrow the tops of your boots

Many are faced with the problem of a wide bootleg on boots, even if the size fits. In this case, you can refer the boots to a professional, or sew on stretch marks on the inside. If the house has a sewing machine and sewing skills, then you can simply stitch the fold located at the back. If the boots are leather, you can wet the tops and then dry them with a hairdryer.

How to reduce shoe size at home

Effectiveness Risk for shoes Opinion Rendez-Vous

Sometimes it happens that the purchased shoes do not fit in size. This happens if it was purchased without fitting. But even with the fitting on, the shoes in life may not suit you in the end.

If you have a special instep, width, foot structure or flat feet, it can be difficult to find comfortable shoes, and wearing comfort is the most important thing.

What if you have already bought shoes and want to wear them, but they are a little too big for you?

All of the above reasons for the discrepancy force people to resort to extreme measures - not to wear shoes or get rid of them altogether. But there is another option. Knowing the methods of how to reduce the size of your shoes at home will make the wearing process much more comfortable.

Insoles - as a way to shrink one shoe size

A simple and popular way is to put in insoles.This procedure can both reduce the size of the shoe by size and make the shoe comfortable quickly and efficiently. Different types of insoles are put in a pair.

In the shoes, based on the situation, you can put wool or insoles made of polyurethane foam. They can also put not one, but two insoles.

It depends on how much you need to reduce the size at home.

Tabs to reduce size quickly

The conditions for using this method are limited. So, it is not suitable for shoes with heels higher than 7 centimeters. Special inserts are sold at any shoe store. It happens that the shoes rub and slip. To avoid this, special silicone tabs were created. They are non-slip and also have the function of shrinking the shoe by size.

Shrinking shoes with tape

When it comes to shoes that fall off your feet when walking, you can use double-sided tape. A similar method is used by models for better contact with shoes. Scotch tape can only be used when wearing shoes on bare feet. The second limitation: it is undesirable to walk too long in shoes that are reduced in this way.

How to reduce the size of your sneakers at home?

There are several simple ways:

  1. If you need to shrink the shoe, place a pad in the heel area.
  2. A great option is to insert thick insoles into your shoes.
  3. An additional strip of padding can be placed under the instep.
  4. You can put some soft material, such as foam or cotton wool, into the nose of the shoe.

The use of cotton wool and other soft materials

You can use a piece of soft cloth or cotton wool to reduce the size. However, this method cannot be called universal.

Important! With open sandals and flip-flops, this method will not work.

Using temperature extremes to reduce shoe size

There are also less popular temperature gradients. They are not recommended by professionals due to the fact that they can lead to undesirable consequences if they are used illiterately. Shoes cannot be reduced in such ways. These options are only suitable for leather shoes.

One of these methods:

  1. Immerse new shoes in a container of hot water, where washing powder is dissolved, for 5 minutes.
  2. Dry the steam thoroughly.
  3. Treat shoes with a leather shoe breaker.
  4. Start wearing shoes at home.

Attention! We do not recommend using this method, as water and an aggressive detergent can damage the shoes, it will be difficult to restore its original appearance and material properties. There are a couple more effective ways:

There are a couple more effective ways:

  1. Dip your feet in shoes in ice water for 3 minutes, and then dry.
  2. Wet the shoes, then dry them with a hairdryer (you need to moisten the inside of the shoes).

Any direct contact of shoes with water, as well as drying near heaters and batteries, is a risk for shoes. We recommend that you only reduce the size of your shoes with the correct insoles for your pair.

Summary

The easiest and safest way to reduce shoe size is to use insoles. It is impossible to use methods related to temperature changes and water, as they harm the shoes.

In emergencies, double-sided tape can help, but its use is also risky.

You can use a soft cloth or cotton wool, but this old method is unlikely to make your shoes more comfortable for your feet.

Earbuds

Shoe inserts are special devices that are placed under the forefoot arch, under the heel, or glued inward in any convenient place, thereby taking up some space in a shoe or boots and making them narrower or shorter. At the same time, the surrounding people will not suspect anything, because they are not visible to strangers.

This is one of the easiest and most affordable ways to return shoes to their previous size and shape if they have stretched during the process of wearing. They are sold in shoe stores and are inexpensive, do not cause discomfort during wear and serve quite a long time. They are easy to care for: it is enough to take them out after each "walk" and dry them in the open air.

There are two types of earbuds:

  • silicone;
  • suede (brown, beige and black).

Both are suitable for suede shoes, while the suede inserts themselves are used only for similar shoes.

The thickness and size of the liners are different, so they can be adjusted based on how big the shoes are. You should also take into account the type of shoes: for shoes and sandals, small liners are suitable, for boots and boots, you can choose more.

If you put the liner in shoes, the heel height of which exceeds 6-7 cm, the load on the foot will increase, and it will be simply uncomfortable to walk.

Tips & Tricks

Before choosing shoes, you need to stand on paper and circle your feet. The cut marks should fit into the purchased shoes and shoes and not bend around the edges. The deep toe, the wide part of which is located at the level of the big toe, relieves stress on the legs, prevents the curvature of the joints. When buying shoes, you need to check the condition of the inner side, there should be no seams on it, and the insoles are easy to remove.

Shoes or boots with a stiff sole are worn longer, while walking, they reduce the load on the foot. When buying shoes, it is advisable to walk around the store in it, to sit. If your foot turns red, look for another model or size. Tights or stockings are worn under closed shoes, but not with sandals. Shrinking patent leather shoes can only be done using insoles or linings. Such products cannot be heated with steam or water.

Simple tips on how to reduce shoe size without leaving home

The following downsizing methods are suitable for any type of material your new pair is made of:

  • The most basic and popular method is to insert size-reducing insoles into new shoes. As a rule, one insole is placed in each shoe, but in some cases it is necessary to insert two. Depending on the season for which the steam that needs to be reduced is intended, additional insoles made of foam rubber, wool or synthetics are used. Especially often this method is used to reduce sneakers and other sports shoes, since in this case, you can also achieve a shock-absorbing effect. Plus, padded insoles can protect the delicate skin of your feet from chafing and painful blisters;
  • Another simple option is to insert a special silicone insert into each shoe or boot, which are sold in shoe stores and have a lot of varieties. In general, the purpose of such a device is somewhat different - such tabs are designed to prevent slipping and rubbing, however, they are just great for reducing the size. Unfortunately, silicone inlays cannot be used to shrink shoes with heels over 7 centimeters;
  • If your new shoes are falling off your feet, you can use a method that is often used by supermodels running the catwalk. To do this, a thick double-sided tape must be glued to the inner part of the sole. This method will be effective only if you put on new shoes on your bare feet. In such a situation, they will stick to your feet and will not fly off when you walk. In addition, walking for a long time in boots or shoes glued to the foot in this way is not recommended;
  • Finally, the most primitive “old-fashioned” way is to push the required amount of cotton wool or any soft fabric into the socks of new shoes. As a last resort, you can use paper as well, but it should never chafe your fingers.This option is not suitable for all models - you will not be able to "squeeze" slippers, clogs or open-toed sandals in this way.

A few tricks for shrinking shoe size

One of the easiest ways is to take a couple to the workshop, where they will perfectly cope with this task. But shoemakers most often do not take on sneakers, boots and shoes made of leatherette or woven materials. You also need to consider that this can cost a pretty penny. If you have the time and desire, you can reduce the size with additional materials.

  1. Insoles are one of the simplest ways to reduce not only the size but also the bulk of the shoe. When some insoles are not enough, you can put two. The material from which the insoles are made is chosen depending on the season. For a winter pair of shoes, fur, felt or woolen insoles are suitable. For demi-season boots, foam or synthetic insoles are usually used. If the insoles are designed for athletic shoes, then they will reduce the size of the sneaker, and will have a shock-absorbing effect.
  2. Silicone inlays - can be purchased at almost any shoe store. Initially, they are intended to prevent slipping and rubbing of corns. But they are also capable of narrowing the shoes a little. But in order to shrink the high heels, it is better not to use them.
  3. Double-sided tape - can be glued to the inner part of the sole of the shoes, but at the same time you need to put them on your bare feet, otherwise the tape will not stick. This method is mainly used by models during shows. Walking in such shoes for a long time is uncomfortable.
  4. Cotton wool, paper or cloth - fits in socks, it will help to make shoes one size smaller. This method was also used by our mothers and grandmothers, because then they often bought shoes for children to grow, or they got them from older brothers or sisters. But keep in mind that this method is only suitable for closed-toe shoes.

On a note!

Cushioned orthopedic insoles are considered a good size reducer for closed shoes.

Useful video tips

Video: Reducing the inner volume of shoes

Reducing shoe size at home is possible, but only if you act deliberately and consistently. The easiest and most reliable way is to go to a shoe store for special silicone inlays. These can be heel or toe pads. You will get many more benefits from these devices, for example, the foot will not slip, the shoes will stop chafing. If you are not a supporter of additional insoles or inlays, then when choosing a way to narrow shoes, you need to start from the material from which the pair is made.

Now many people order sneakers or boots on the Internet, because on the manufacturer's website you can buy a suitable model, a high-quality product for a cheaper price. However, the sizes do not always coincide, and you do not want to send back the shoes you like, and shipping is not cheap. There are different ways, using which, both shoes and sneakers are stretched, but sometimes the question of how to reduce the size of the shoes becomes relevant.

What if the leather shoes are too big?

The same as in the case of non-leather (sports, work, rubber). It so happened that the comfort of our feet depends more on the appropriate size and cut than on the shoe material.

What if the shoes are big in the heels?

This question usually arises when you've got shoes with too high instep (even tightly tightening the laces does not help).

Here's what can help:

  • soft insert in front;
  • insert under the lacing or under the tongue of the boot.

In the first case, the toes will rest, the foot will move back, and the shoes will fit. In the second, the upper of the shoe will stick more tightly to the instep of the foot so that the foot is securely and comfortably fixed inside the shoe.

The insert can be made from sufficiently thick fabric, leather or felt, also by using several layers.You can fix it with laces, that is, for each half pair, make two things with holes for lacing. If there is only one insert (under the tongue), then it is fixed with glue.

The second option is to sew Velcro onto the shoe tongue. In general, if the shoes are large in the heels, then the lift must be adjusted.

1 Insoles

You cannot change the size of the foot, but you can use insoles to reduce the fullness. For winter shoes, it is recommended to choose additional felt shoes. They reduce the inner volume of the shoe by more than a centimeter and retain heat better.

Heel insert

For demi-season and summer shoes, it is better to use silicone insoles or inserts. They are sold as a companion item in shoe stores. Special insoles with a high heel are also available. They reduce the fullness on the rise, while the leg stops falling forward.

If you can't buy the necessary inserts, you can make the size reducing insoles yourself. For this you will need:

  • thick cardboard;
  • pieces of fur from an old fur coat or felt from a felt boot;
  • glue Moment.

Insoles blanks

The work algorithm is as follows:

  1. 1. Remove the insole from the shoe and use it as a sample.
  2. 2. Cut 2 cardboard blanks and the same amount from fur.
  3. 3. Coat the skin and cardboard with glue and connect.
  4. 4. Leave to dry completely.

Felt insoles do not need to be glued to the cardboard. They are dense and keep their shape well. When cutting out felt inserts, you need to reduce their width by a couple of millimeters around the entire perimeter.

How to reduce the size of genuine leather shoes on your own?

Most often, people are interested in whether it is possible to reduce the size of leather shoes, and how to do it yourself. Genuine leather is one of the most flexible materials. It will easily take the shape and size you need.

Try to shrink your new leather shoes like this:

  1. For 3-5 minutes, hold your new shoes in a basin of hot water, in which you must first dissolve the washing powder. Then dry your shoes in direct sunlight or in the immediate vicinity of heaters. Immediately after they are completely dry, the inner surface must be abundantly watered with a special detergent for wearing leather shoes, and then put on your feet and walk around the house. If you did everything correctly, and your shoes are really made of genuine leather, this material will become incredibly soft and pliable and will fit exactly on your foot. Try not to dry your shoes. If you delay at least one stage, you can get the completely opposite result;
  2. You can also wet the inner surface of your new shoes well with a spray bottle, and then immediately dry them on the battery;
  3. Finally, the simplest method is to put on too loose shoes on your feet and lower them in a basin of ice water for 2-3 minutes, then immediately put them to dry near the turned on heating radiator or use a hot dryer.

Any method of using the theory of compression under the influence of a sharp difference in temperature is very simple and can be easily applied at home. Nevertheless, not all girls dare to try at least one of the above options, since all of them are likely to ruin the beautiful surface of your shoes.

flwn.imadeself.com/33/

We advise you to read:

14 rules for saving energy