How to fold a business suit for a trip

Work algorithm

You need to iron the parts in a certain sequence. Proceed as described below, then you will like the result of the work:

Pockets. Ironing starts from the pockets, from the seamy side. They must be turned inside out, the folds must be smoothed out and ironed through a damp cloth, and then carefully turned back. Sleeves and shoulders. This is perhaps the most difficult moment. It is better to moisturize both sleeves and shoulders and continue ironing until dry. In this case, a special sleeve holder is very useful. These coasters are sold with modern ironing boards or purchased separately. It won't be easy to iron the sleeves on a board, but there is a way out. Use a rolled up towel and insert it inside the sleeve. There are also special pads for the hangers, and if there are none, adjust the towel again.
Pay attention to the seams, elbow and shoulder - they must be carefully straightened and ironed. Backrest, backrest and shelves
If we ironed the previous details from the inside out, now the jacket must be turned over to the front side. The back and shelves are easy to iron, and after this stage the work can be considered almost finished. Collar and lapels. These details should be treated with the same attention as the sleeves. Although they are small, with a crumpled collar or lapel, the jacket immediately loses its appearance. They must be ironed from the front side through a damp cloth, like the back with shelves.

If the part is badly wrinkled, pull it on with one hand and gently apply the iron with the other. In this case, it is advisable to moisten not only the fabric through which you are ironing, but also the part itself

It is convenient to straighten the corners with the sharp tip of the iron.

Jackets are sewn not only from suit fabrics; there are leather goods, woolen and corduroy models on sale. Care for them is different, and is described in detail in other sections of the site.

Now let's pay attention to the peculiarities of ironing a woolen and corduroy jacket.

Steam generator application

The steam generator is a convenient device for steaming any clothes. It is very easy to tidy up your jacket with it. The steam generator is filled with water and the vertical steaming mode and the desired temperature are set. The jacket is hung on a hanger. First, the sleeves are steamed by lifting them with your free hand. For steaming, the steam generator is kept at a distance of 10-15 cm. Then, the shelves and the back are steamed alternately. If the fabric is fleecy, then hold the steam generator at a distance of 20 cm from the surface. Work should be done with movements in the direction of the pile. A good alternative to a steam generator is a handheld steamer. It is comfortable to hold in your hand. The principle of operation is the same as for vertical steaming.

How to fold the jacket?

By applying the correct folding technique, you can avoid the appearance of small folds and creases on the products. Let's consider several options that will help to preserve the appearance of the product as much as possible after transportation.

Method number 1

How to fold a jacket so as not to wrinkle:

First of all, we turn out one of the sleeves and align the stand along the shoulder line.
The second sleeve does not need to be turned out. We insert it with the shoulder into the shoulder of the turned-out sleeve, carefully align it along the entire length.
After that, we lay out the jacket on a horizontal surface and align the sides.
Correct the sleeve and lay it on top. The end result is a rectangle that has equal sides. This folding process creates a void inside the shoulder, which, when broken, creates a fold.

Method number 2

In order not to spoil the appearance of the jacket, we fold it in this way:

We take the jacket by the collar and twist only one shoulder to the seamy side.
With the second shoulder we insert a half of the jacket into the resulting space. If you managed to do everything correctly, then the front surfaces of the hangers should be in contact with each other. In this case, the jacket is turned inside out.
Align at the seams and the halves of the product themselves so that a rectangle is formed.
We fold the resulting structure in half.

Method number 3

This method of folding does not involve turning the jacket over to the wrong side. In this case, shallow folds are formed at the folds on the front side of the product. Therefore, when you are traveling, you cannot take a jacket out of a suitcase and put it on at the same minute to a gala event.

How to fold a jacket into a bag:

Unfold the product on a horizontal plane so that the back of the jacket is at the top.
We take the jacket with one hand at the midpoint of the shoulder and mentally find the midline along the back surface of the product.
We wrap a part of the jacket up to this line.
We align all the seams on the sleeve.
We wrap the other side of the product in exactly the same way.
The third twist occurs by folding the resulting rectangle in half in half so that a square is formed.
We put the jacket in the bag.

Method number 4

To fold the jacket correctly, you need to do the following:

Turn the jacket inside out together with the sleeves.
We put our hands inside in order to straighten the shoulders well.
In one hand we connect two shoulders, and with the other hand we take the product in the middle of the collar

We carefully straighten the clothes, especially pay attention to the seams that are located along the length.
We correct the fabric from both the front and the wrong side.
Turning over over the elbow, fold the upper part of the suit along a horizontal line. The result is a square convolution

This shape does not take up much space and can easily fit in any bag or suitcase.

Method number 5

How to fold a jacket to preserve its original appearance as much as possible:

We place the upper part of the suit on a table or on any horizontal surface.
We fasten all the buttons.
Gently turn the clothes over with the buttons down.
With one hand we hold the product in the middle of the shoulder seam, with the other hand we take it by the lower part of the jacket and wrap the side along with the sleeve over the back of the garment.

Now let's move on to the sleeve. We bend the sleeve along the line of the armhole so that it is strictly parallel to the previous fold.
Using the same technology, you need to fold the upper part of the suit on the other side, and fold the second sleeve in the same way.

Folding the shirts into the closet

The best way to store shirts in a closet is considered to be the "by the hangers" method on the hanger. At the same time, it is recommended to fasten them with all the buttons. Then the front planks will be in a vertical position and will not shift, and, accordingly, wrinkle.

If the apartment or hotel does not have hangers and a special compartment in the closet for them, then you need to store things on the shelves. The diagram clearly shows step by step how to fold the shirt sleeves and how this process should take place. Experts advise using the cardboard box that is sold with the product. If you, like many people, threw it out, then do not worry, since it is not difficult to find a replacement for it. You can replace it with a simple rectangular piece of cardboard from the kids' creative kit by purchasing it from your office supply store.

Useful Tips

Before folding a jacket and trousers, it is better to familiarize yourself with the following rules:

Before placing the suit, you should steam it well in dry cleaning or on your own, if you have the skills and a special tool.
All items must be removed from the pockets so that their shape is not imprinted on the product.
It is not recommended to fasten the parts of the product with clothespins or clips, dents will remain on the fabric.
It is better to use a special bag for storing your jacket and trousers, leaving a small amount of air in it, which will become a layer between the suit and other things.
Packaging can be used to further protect the product. Items are placed on a piece of paper or polyethylene and folded with them. In this case, the material is fixed with tape at all stages.
It is better to pre-practice folding the garments, since it is not a fact that the first time you get a neat folding.
Care should be taken to ensure that folds run straight along the seams as much as possible.
If, when removing from the suitcase, folds were found on the products, and it was necessary to use hot steam to remove them, then it is necessary that the things dry well on a hanger before putting on.
To keep the amount of folds and unevenness to a minimum, it is better to put things in a bag or suitcase made of hard material.
Hard bulky shoes are placed near the sides of the suitcase so as not to wrinkle the suit.

For packing a jacket and trousers in a suitcase, the main place is given, casual clothes, underwear, socks and other things are placed in free space.

Using the rules for storing a jacket and trousers, you can transport a suit in a suitcase and at the same time keep its impeccable appearance. Ironed sides, lapels, pockets, slots on a jacket and arrows on trousers will remain in perfect condition if the products are folded carefully and neatly.

Preparing for ironing

Make sure your jacket is clean enough before ironing.

Important! If there are any stains or dirt on the fabric, after heat treatment, they will deeply enter the fibers. It will be difficult to remove them .. If there is no serious contamination, clean the product with a clothing brush anyway.

This will help remove dust and hair. Then, lay the clothes out on the ironing board. Carefully smooth out the wrinkles on the lining and on the front each time you transfer it.

If there is no serious contamination, clean the product with a clothing brush anyway. This will help remove dust and hair. Then, lay the clothes out on the ironing board. Whenever you transfer it, carefully smooth out the wrinkles in the lining and on the front.

In order to properly iron the material of the suit, you will need a damp cloth. It will act as a protective pad between the surface of the garment and the iron. Linen works best, but cotton can also be used. The easiest option is gauze, which must be folded in several layers and moistened during ironing. It is better to take water settled and pour it into a cup. If you can pour it directly into the iron, then it is more convenient to moisten the fabric with it.

Classic models usually start to shine if you iron them directly on the surface. If the jacket has already started to shine, dampen it and iron it through a dry cloth.

Turning on the iron, set the temperature immediately. A guide to the choice of heating is the label on the wrong side of the product.

For things made from natural wool, the temperature should not exceed 165 ° C.

What to do if clothes are wrinkled after transportation

It may happen that despite all your efforts and strict adherence to the rules when packing your suitcase, the shirt is still rumpled. What if there is no time or opportunity to iron a thing, but you need it? It is not difficult to restore a decent look.

Use the "steam" method. Turn on hot water in the bathroom and close the door tightly. After the temperature and humidity in the room have risen, leave the shirt there, hung on a hanger, for 15-20 minutes, and then wait for it to dry. Do not put on the item immediately after “steam off” the folds, wait for a while, otherwise the item will be wrinkled even more.

It should be noted that this method is effective in many cases, but there are exceptions.For example, some types of linen or cotton fabrics from such an effect will be covered with even more folds than they were originally. In this case, you will only have to use the iron if your suit is wrinkled.

How to fold a jacket into a suitcase

The problem of how to put a jacket in a suitcase is faced by everyone who at least once went on a business trip to important business negotiations. At such meetings, a strict suit is a prerequisite. It is clear that it includes such an important detail as the jacket.

In fact, a jacket is a rather difficult piece of clothing to transport. It has significant dimensions, various small parts, the material wrinkles very easily, it is sometimes very difficult to fold it. However, despite such difficulties, it can be packaged in several ways, each of which does not imply anything complicated. We will tell you how to cope with difficulties and deliver the jacket to the point of destination safe and sound.

How to fold a jacket neatly

Folding the jacket for storage or on a trip so that it remains unwrinkled and takes up little space in the bag, you need to correctly. If you use all the recommendations, the thing will retain its previous appearance.

How to fold a jacket so it doesn't wrinkle

You can compactly collapse in a simple way:

Take the thing by the collar and turn one shoulder inside out.

Before putting the jacket for storage, it must be cleaned and ironed with steam. This allows the creases to be smoothed out well. If there is no heavy pollution, then the thing can not be taken to dry cleaning.

This method is also suitable for folding a jacket into a suitcase or travel bag. The video shows the process in more detail.

How to properly fold a jacket for a gift

There are times when a woman wants to present her man with an expensive and practical jacket or suit for a holiday. Just bringing it on a hanger will not be entirely appropriate, the thing needs to be beautifully folded and packaged.

You can do it like in a store, without turning the product inside out. A little trick will help to lay it beautifully:

Place the item on a flat, hard surface with the back facing you.

Can now be wrapped in a transparent gift bag and tied with a ribbon. However, it is worth noting that before putting on, you will have to iron the thing.

How to fold a suit into a suitcase

You can compactly fold a men's suit for a small business trip into a suitcase in different ways. But this one remains the most beloved among the strong half of humanity:

Turn one sleeve to the wrong side, align the collar. Insert the second sleeve into the first without twisting.

Many men can attest to the convenience of folding a suit or jacket into a bag this way. The thing retains its appearance and does not wrinkle. However, the product is pre-ironed well. This can be done in the classical way, but through a thin natural iron, so as not to spoil the fabric.

How to neatly fold a suit into a backpack

To fold the suit on a long journey, it is convenient to roll it up with a roll or roller. The jacket is treated as described above, and the trousers are folded in half, aligning the arrows. Next, they put them on top of the jacket, they all roll up in a roll.

The compact package fits well even in a small backpack. And what is remarkable, there is no need to iron the suit before putting it on.

How to fold a suit into a bag

Before storing a suit in a bag, it must be folded correctly. There is a small instruction on how to do it compactly:

Fold the jacket in half in the middle of the back. Put one shoulder over the other. It turns out that the first side of the product is turned inside out. Pull both sleeves to the wrong side, wrap them over the back.

How to compactly fold a jacket

To fold the jacket so that it takes up little space, and even does not wrinkle, you need to try hard. This can be done in a simple and affordable way:

Turn the sides of the garment inside out so that the sleeves remain inside.

How to roll a jacket on the road

There is another simple way to fold your business trip jacket into a travel bag or suitcase. To do this, proceed according to the instructions:

Turn the sides to the wrong side.

This method allows you to store your jacket in your bag for several days. Then you need to get it out and put it on a hanger. Over time, the thing will take on its original appearance.

How beautiful to fold a jacket

You can fold a thing nicely and compactly as follows:

Lay on a hard surface with your back to you. Spread the sleeves to the sides.

However, before packing it, in this way, it is cleaned of any dirt, pockets are emptied, and ironed.

How to pack a jacket

You need to pack your jacket for long-term storage in a straightened form. Together with the hanger, it is placed in a special bag or case, which is fastened along its entire length. After that, the lower edge of the cover is tucked towards the upper one. The result is a compact package that can be stacked in a box.

Folding methods

There are several common options for storing a suitcase in a suitcase to preserve its appearance. If done correctly, upon arrival at your destination you can take it out of your suitcase ready to wear.

Roll

In this case, the jacket is folded into a small, neat roll that fits on the bottom of the suitcase. The method is quite difficult, but at the same time, when you get it out of your suitcase, you can put it on right away. If you travel often, you just have to master it perfectly. This method will work for any other garment as well. Such laying is performed in the following order:

one sleeve is turned inside out, the collar should be straightened;
the second sleeve is inserted inside the first, so that both elements are the same length. It is checked that the seams on the sides of the sleeves are parallel;
the jacket is aligned to the edges on a table or other flat surface to obtain the correct rectangular shape;
the sleeves are wrapped in the middle, it is recommended to put rolled socks, a T-shirt or just a wad of paper inside. This will help avoid shoulder wrinkles;
The resulting rectangle is tightly rolled into a roll. It is advisable to put it down and against the wall of the suitcase so that on the road it would be pressed by other things.

Rectangle

Another way to keep the jacket from wrinkling along the way is to fold it into a rectangle. In this form, it will also take up very little space in the suitcase. It will be faster and easier to fold it in this way. This method is good for folding wool. Procedure:

the jacket is turned inside out;
the shoulders are straightened so that the inserts in them do not interfere with folding it;
the jacket is taken by the shoulders and the middle of the collar, folded vertically and aligned at the side seams. The result should be a rectangle;
at the final stage, it doubles again. It is advisable to put some things in a suitcase under it, and press it on top with something heavy.

Fast

It is very easy to fold a jacket in this way, but it has its drawback - "creases" may appear on the fabric. Also, you won't be able to use it if the material of the product is too thick. If it was not possible to avoid "creases", after removing it, you need to iron or steam the jacket. Thus, this method is suitable for those who do not need a suit immediately after arriving at their destination. If it is made of materials that wrinkle easily, put a rectangular piece of cardboard or a thick magazine inside. The jacket is folded in the following order:

unfolds on a flat horizontal surface with its back up;
the shoulders together with the sleeve are alternately wrapped on the back so that the edge of the floor lies along the seam in the middle;
sleeves are aligned parallel to each other, folds are straightened and smoothed;
the jacket folds in half. In this case, you can put suit pants or other items of clothing inside.This will make the inevitable creases in the fold less noticeable. To prevent it from turning around, you need to put several things on top of it.

"Like a shirt"

When folded in this way, the jacket can also wrinkle a little and will take ironing or time to "hang loose." In this form, it should be laid on top of other things so as not to crush the collar. We turn off in stages:

the jacket is fastened and spreads upside down, the sleeves should be straightened;
the edges of the jacket are wrapped in the middle of the back, you should navigate along the seam;
sleeves fit flush with the resulting edge so that a rectangle is obtained;
it flips over and folds in half.

Folding right side out

In this case, you should not turn the jacket inside out, but this method is not suitable for everyone, since folding the suit in this way will not be able to immediately put it on and go to a business meeting upon arrival at the destination. And all because with this folding option, creases and folds can form on the front side of the product. But if you have the opportunity and time to iron or steam the jacket, then you can easily use this method:

Lay the jacket face down on a flat, flat surface.
Draw a line in your mind from the neckline to the bottom edge of the garment. Then grab the corner of your shoulder with one hand and hold the bottom of your jacket with the other. After that, fold this part of the product with the right side towards the back. Try to keep the side edge of the garment aligned with the center line on the back.
Place the folded sleeve neatly on top

It is important that its borders do not protrude beyond the figurative center line. Spread the sleeve along its entire length and check for even seams.
Do the same with the other side of the jacket.

Place the folded second sleeve over the first. It turned out that the product was folded in three. Run your hand over the entire length of the garment again and smooth out possible waves, folds and creases.
The final step will be to fold the suit in half so that the product has a square look. To avoid severe folds and folds, put any other piece of clothing that has been folded several times inside the jacket before folding. For example, it could be a pair of suit pants or a pair of T-shirts.
Now you can put your jacket in your bag. To prevent the item from unfolding, place several dense items on top of it.

Useful Tips

You can use tape or elastic to roll the jacket into a roller shape. In this case, the packed item will not unwind.
It is better not to put the folded jacket on the bottom of the bag. Things from above can ruin its shape. Then all efforts to preserve the neat appearance of the jacket will be in vain.
You can compact the suit into a suitcase by folding the jacket and trousers together to form a cylinder.

The best option when transporting a suit and business attire is to use covers and travel hangers. However, the above tips will definitely simplify your life and save you from unnecessary hassle during your vacation or business trip. If the clothes could not be prevented from bruising, and there is no iron nearby, you can hang them in a steamed bathroom. The steam from the hot water will soften the fabric and straighten small wrinkles.

Features of storing jackets

A man's suit costs a lot of money, so you want it to last longer. To do this, you need to properly care for him.

The jacket should be stored in a spacious closet, on a hanger. But the usual will not work. The best option is a wooden one in a case. It is allowed to use plastic hangers, but they will not withstand heavy sets.

To protect the costume from pests, the item is stored in a case. It is also used to transport wardrobe. For everyday use, a synthetic cover is suitable, but for long-term storage it is packed in a bag made of natural fabric. It will protect the thing from the appearance of mold and pests.

If there is no dressing room, you need to store it in a closet.But it is regularly ventilated so that there is free access of air and the moth does not start.

Important! It spoils products made from natural fabric, therefore, pest repellents are used.

Useful Tips

If the shirt is a little crumpled in a suitcase or bag, there is one simple method to rectify the situation. You need to hang it on a hanger in the bathroom and open a hot tap, preferably in the shower. When the bathroom is full of steam, close the water and hang the hanger in the thick of steam. It should be no more than 5-10 minutes to be in such a pair. After that, you need to hang it on a hook in a dry room. It will look great, as if it was ironed with an iron.

This method cannot be used only in one case - if the shirt is linen. Although it is a natural fabric, steam can make it shrink and shrink.

How to fold a jacket: methods and rules to avoid wrinkling, useful tips

It is customary to store outerwear on trempels, wrapped in a special cloth or wearing a cover for the summer season. But it is not always possible to place all things in the dressing room, for some there is simply no place

Therefore, it is important to know how to fold the jacket quickly. Also, this skill is required if a person goes on a business trip, where he takes a jacket, but he does not want to start ironing from scratch.

Basic ways to stack a jacket

There are various ways to fold a jacket. At the same time, some of them require preliminary turning inside out, others do not.

The most popular way is to roll it with a roller, after which the clothes always retain their original ironed appearance. There is less chance that outerwear rolled into a rectangle will stay in order. But this method takes a minimum of time.

If the likelihood that something could spill is minimal, then you can fold the jacket without turning it inside out.

Roller

In order to roll a jacket into a cylinder, you need special accuracy and skill. The algorithm is pretty simple:

iron the jacket thoroughly;
turn one sleeve to the wrong side;
extend the shoulder along the required line;
insert the second sleeve into the first along the entire length, while, of course, it is not necessary to turn it out;
put outerwear on a flat and large table;
combine the edges of the product;
fold up evenly, along the side line;
be sure to ensure that the bend is along the seam itself and does not go beyond its limits;
place something voluminous on the shoulder recess and that it will not be a pity if it gets wrinkled (for example, a T-shirt for sleeping, a few warm socks);
roll slowly into a roller or cylinder.

When folding, proceed carefully. Creases may form. To prevent this from happening, it is necessary to straighten the tissue sections, if it is foreseen.

Most often, the cylinder stacking method is used in the event that you need to put the jacket in a closet for storage.

If you plan to take things on a trip, then it is better to fold them in a different way - this will take up less space.

Without eversion

The non-inverted folding option does not always give the best results. It is possible that creases are formed on the outer back of the product. Therefore, it will not be superfluous to take a special fabric steamer with you in your luggage. However, it is required to turn it out, which significantly speeds up the procedure. Would need:

fold the jacket on a flat surface with the outside side down;
straighten over its surface so that no kinks form;
bend the extreme part of the product towards the back (for this you need to visually divide one of the parts of the thing into two parts);
carry out identical manipulations for the second side;
fold in half.

Inside such a jacket, you can immediately put trousers, pre-ironed and correctly folded.

How to fold a suit properly

Basically, the jacket is folded in one of the last two ways. The pants are placed inside it. So that there are no creases on them, the arrows do not have to be ironed back, you need to learn how to fold them correctly:

take trousers by the waist line;
stretch them along the length (for this you need to raise your hands);
fold the trousers strictly according to the arrows, for this you need to hold it with one hand, and the other to catch on the folds on both trousers;
connect arrows;
straighten the legs to avoid creases;
fold on a flat surface and level again;
fold three or even four times - depends on the length and width.

It is important to take into account that the bottom of the leg should be inside the rolled product. And the belt should only be on the outside

If you change the order of distribution, then the hem can be very wrinkled.

How to pack your suit for a trip

a suit for a trip can be done in a rectangle way. Pants - classic version. In this case, the belt must certainly be pulled out and folded separately in a narrow pocket, so it does not change the line of clothing and does not scratch it with its sharp parts.